Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.8 LAccepted-AOC 1625 B 1 OLD GADDA KHANNA ARYA SAMAJ PATIALA | PATIALA | PATIALA | PUNJAB | ₹33.8 L | L1 | Accepted-AOC Quoted
Lowest rate |
| 2 | L2₹42.5 LRejected-AOC 136 ADVOCATE SOCIETY SECTOR 49 CHANDIGARH | ₹42.5 L | L2 | Rejected-AOC Quoted
Higher rate |
| 3 | L3₹44.2 LRejected-AOC 492 PHASE 6 MOHALI | MOHALI | ₹44.2 L | L3 | Rejected-AOC Quoted
Higher rate |
Tender Value
₹48.8 L
EMD Value
₹97,503
Closing Date
28 Jan 2026, 4:00 pmClosed
Executive Engineer Provincial Division Chandigarh
Room No. 315-16 Third Floor, 17 Bays Building, Sector 17, Chandigarh
Special Repair/Renovation of Punjab State Commission for N.R.I s at Punjab Civil Secretariat 2,Sector 9 Chandigarh
2026_CEPW_157826_1
34 Dated 13.01.2026
Open Tender
Civil Works
120 days
Punjab Civil Secretariat 2 Chandigarh
Please refer Tender Documents
3 documents required · 3 mandatory
₹5,000
Yes
₹97,503
Yes
19 Mar 2026
14 Jan 2026
29 Jan 2026
14 Jan 2026
28 Jan 2026
14 Jan 2026
Dismantling plank flooring. (CSR 8.20)
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge. (CSR 8.44)
Dismantling brick work tile, masonry or tile lining. (b) In cement. (CSR 8.5) (b)
Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled.(a) Doors of area 3 sqm and below.. (CSR 8.26) (a)
Scraping (c) Cement plaster (CSR 8.31) ©
First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.(CSR 11.8) (i)
115mm thick brick wall in cement sand mortar 1:4 without reinforcement in superstructure (CSR 11.36)
12.5 mm thick cement plaster 1:4 (CSR 15.9)
20mm thick cement plaster 1:4 in two coat work.(CSR 15.20)
Providing and applying injection grouting using cement slurry admixed with Fosroc Chemical Conplast WL or any other equivalent compound @ 300 ml/ Bag of cement through the uPVC nozzles ( 12mm dia uPVC/ Plastic Nozzles - 4" to 9" long @ 5 No: / Sqm of area) , provided into the cracks/ honeycombed areas using 140 PSI hand operated Grouting Pump under pressure till the refusal,doing final Cement slurry Grouting (after 28 Days),, finally cutting & sealing of Nozzle. including all labour, supervision, tools and tackles and transportation etc. complete as per direction of Enginner -in- charge. (CSR 13.94)
Providing and fixing chicken mesh for brick work and RCC junction of galvanized low carbon wire, annealed wire of diametre 0.6 to 2.0mm distance between the faces of the hexagon 13 to 50mm complete in all respect. CSR 15.79)
Scraping (a) White wash and colour wash. (CSR 8.31) (a)
White washing (Three coat). (CSR 16.3)
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish. (CSR 16.65)
Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) (CSR 16.63)
Wall painting with Texture paint complete in all respect
Dismantling concrete (d) Cement concrete plain1:2:4 mix (CSR 8.6) (d)
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (CSR 14.125)
Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make an ideal choice for high traffic zones.) (a) Size 600x600 mm. (CSR 14.115) (a)
Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm.(CSR 14.114)
Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.(CSR 14.117)
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. (a)Size 600x600 mm. (CSR 14.120) (a)
Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles.(CSR 14.121)
Providing and laying Laminate wooden flooring (Grade AC4 or AC4+ laminates) 6 mm to 12 mm thick, having a good backing layer made up of plastic laminate or melamine, core made up of medium-density fiberboard (MDF),which is less resistant to impact damage and less resistant to being dented by heavy furniture, having a décor layer to give each floor its appearance and consisting of one or more sheets of paper impregnated with melamine resin and top wear layer having clear aluminum oxide finish that protects the decorative layer & imparts the desired level of sheen, from full gloss to low gloss, duly fixed to the base floor using adhesive as approved by the manufacturer.(CSR 14.101)
Providing and fixing wooden Door Profile complete in all respect
Providing and fixing tiled false ceiling at height upto 4 mtr of specified materials of size 595x595 mm ( GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece..) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.(CSR 13.81)
Providing and Fixing ceiling at height upto 4 mtr consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings, specifications and to the entire satisfaction of engineer-in- charge. (CSR 13.65)
Providing and fixing of Zebra Blinds i/c cost of all necessary accessories complete in all respects. (N.S)
Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surfac. (CSR 16.31)
Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.(CSR 16.18)
Renewing glass panes with putty and nails wherever necessary (b) Glass panes weighing 10.75 Kg/sqm (CSR 31.5) (b)
Earth filling (ii) Earth filling under floors with surplus soil containing more than 40% taking outside the premises in 15 cm layers including ramming watering and consolidated lead upto 1000 metres. (CSR 6.8) (c) (ii)
Conglomerate floor 50mm thick cement concrete rete 1:2:4 on 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 40mm gauge and 100 mm fine sand using mechanical mixer for mixing of material. (CSR 14.10)
Providing and fixing ply wood, plain lining, butt jointed including PVC Plug placed at 45 cm to 65 cm centers complete with necessary nails (Frame work shall be payable extra) (a) 4mm thick 3 ply decorative ply wood with teak faced on one side. (CSR 17.32) (a)
Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 (c) Decorative with teak facing on both sides edges lipped with teak with laminated core. (iv) 35mm thick. (CSR 17.27) (c) (iv)
Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973 (b) Decorative with elm or gurjan facing on one side and teak facing on the other side edges lipped with teak with laminated core. (iii) 30mm thick. (CSR 17.27) (b) (iii)
Chowkats of commercial hard wood such as Hollock confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops, bolts for hold fasts etc, complete fixed in position. (B) Single Rebate (60mm x 100mm) (CSR 17.15) (ii) (B)
Providing and fixing teak wood plain lining tongued and grooved including PVC Plug placed at 45cm to 60cm centres complete with necessary screws frame work shall be payable extra (b) 25mm thick (CSR 17.31) (b)
Providing and fixing teak wood beading to door windows chowkats with iron screws fixed in position complete as per design and shape required. (a) 50mmx12mm (CSR 17.35) (a)
Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. (CSR 16.15)
Spirit polishing two coats including a coat of wood filler on wood work. (CSR 16.45)
Providing/Fixing of Cupboard made of 19mm th. Commercial board finished with lamination from both sides ( including partitions and Drawers) complete in all respect i/c necessary fittings.
Providing and fixing of jointless domes of dia 3' made up of polycarbonate sheet including application of sealent, silicon. complete in all respect
Cement concrete 1:2:4. (a) With stone ballast or shingle. (i) mixing by manual means. (CSR 10.13) (a) (i)
Extra over item No. 10.1 to 10.13 when work is done in situ in small quantities not exceeding 0.30 cum per block in situ such as staggered blocks, arrows, concrete block over inverted filters, bed plates arches etc. (CSR 10.14)
Centering and shuttering for columns (circularor curved in plain)
Marble stone flooring with 18-20 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : (iv) Udaipur Green Marble Tiles of thickness 18mm to 20mm. (b) Slabs sizes above 0.50 sqm (CSR 14.73) (iv) (b)
Providing and laying Polished Granite stone 18 mm thick flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. (b) Polished granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.(CSR 14.89) (b)
Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. (CSR 14.88)
Extra labour for projected nosing of stair case of any shape and design. (CSR 14.56) (b)
Providing and fixing of partitions full/low height solid partition consisting of Hollock wood frame work consisting of 3"x2" hollock wood, except skirting members which shall have 2x75x50mm members at required spacing of 2' c/c but not exceeding 3' in either direction or as/site condition, finished with 4mm thick teak veneer over 9 mm Commercial ply on sides complete including spirit polishing. The rate shall inclusive of providing and giving neat finish inclusive of Spirit polishing on all exposed wood surfaces.
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-InCharge. (Glazing and paneling to be paid for separately) : For fixed portion and chawkhats (CSR 17.45) (a)
For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required (CSR 17.45) (b)
Providing and fixing Aluminium Grill 75 mm x 75mm complete in all respect
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) (i) Float glass panes of 5 mm thickness. (CSR 17.47) (i)
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on one side. (CSR 17.46) (i)
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (B) 250mm x 16mm. (CSR 17.49 (B)
Providing and fixing Sliding c channel complete in all respect
Providing and fixing Sliding Redu set complete in all respect
Providing & fixing 100mm with Plate 150mmX32mmanodizedaluminumMat Finish handles ISI marked on door & windowframescomplete inall respectas per the directions of Engineer-in-charge.(CSR 17.83)
Providing & fixing 150 X 10 mm anodized aluminum Mat Finish tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.(CSR 17.87)
Providing & fixing 100 X 10 mm anodized aluminum Mat Finish tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. (CSR 17.88)
Providing Polyester Powder coating 50 micron any coloured specified to alumnum fittings various sizes including carriage of material from market to workshop & workshop to site of work. (a) Tower Bolt 100mm to 300 mm Long. (CSR 18.58) (a)
Providing Polyester Powder coating 50 micron any coloured specified to alumnum fittings various sizes including carriage of material from market to workshop & workshop to site of work. (b) Sliding Bolt all Sizes. (CSR 18.58) (b)
Providing Polyester Powder coating 50 micron any coloured specified to alumnum fittings various sizes including carriage of material from market to workshop & workshop to site of work. (c) Handles all Sizes. (CSR 18.58) (c)
Providing Polyester Powder coating 50 micron any coloured specified to alumnum section of various sizes including carriage of material from market to workshop & workshop to site of work. (CSR 18.48)
Providing & fixing Stainless steel ball bearing hinges of size 100x89x3mm ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. (CSR 17.98)
Providing & fixing 4" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. (CSR 17.75)
Providing & fixing 8" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. (CSR 17.77)
Providing & fixing1'-6" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. (CSR 17.79)
Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete (c) I.S.I Designation No. III (size of door 851mm to 1000mm) (CSR 17.43) (c)
Providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). (CSR 17.22) (iv)
(v) Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminum doors including necessary cutting and making good etc. complete.(CSR 17.22) (v)
Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt. (ii) For shutter area above 0.50 sqm (CSR 17.23) (ii)
Providing & fixing 6" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.(CSR 17.69)
Providing and fixing of Antique Brass Door Stopper i/c screws etc complete in all respect
Raking out joints in lime or cement mortar and preparing the surface for repointing or replastering including cost of neat of cement disposal of rubish to the dumping ground within 50 m lead (excluding the cost of scraping of plaster and replastering). (CSR 31.16)
Flush/Ruled/Struck or weathered pointing on tile brick work with cement mortar 1:3 (1 cement :3 fine sand). (CSR 15.61)
Extra for Plastering where any single storey height exceeds 4 metres in height for every additional height of 2 metres or part thereof.(Internal or External) CSR 15.85)
Tile facing with 22.86x11.43x3.81 cm tile laid in cement sand mortar 1:4 in Ist storey upto 4 metres above plinth level without steel reinforcement (CSR 11.49)
Extra for tile facing in additional storey upto 4 metres above the top of structural roof of the lower storey (CSR 11.52)
12.5mm thick raised cement mortar bend / drip course in cement mortar 1:3(CSR 15.12)
Plastering on underside of ceiling 10mm thick cement plaster 1:3 (CSR 15.43)
10mm thick cement plaster 1:3 on floors. (CSR 15.37)
Finishing walls with cement based water soluble exterior paint such as snowecem, robbiacem etc. on old work one coat to give an even shade. (CSR 16.14)
Providing and fixing of superior quality peacock layer ventilated blinds with double net on outer sides and attached with horizontal clothes strips i/c cost of all necessary accessories complete in all respects. (N.S)
Providing & fixing teak wood top size 150mm x 75mm on stair railing including polishing complete in all respect. (CSR 17.61) (i)
Disposal of malba (CSR 5.2 (i)) Lead 9 KM for disposal (Mini Sectt. to Industrial Area Chandigarh)
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.49 MB
SBD.pdf
Tender Documents • 6.37 MB
BOQ_320054.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid