COMPLETION OF INCOMPLETE AND BALANCE WORKS FOR PROVN OF SEWAGE TREATMENT PLANT (STP) AT SOMGARH, SRINAGAR

Amount

Total amount of Sch 'A' Part-I (Sec-I) (Bldg works) carried forward from pre-priced Schedule.

Total amount of Sch 'A' Part-I (Sec-II) (Bldg/STP works) carried forward from pre-priced Schedule.

Total amount of Sch 'A' Part-II (Internal Water Supply Works ) carried forward from pre-priced Schedule.

Total amount of Sch 'A' Part-III (Sec-I) (Internal Electrification works) carried forward from pre-priced Schedule.

Sch 'A' Part-III (Sec-II) (Internal Electrification works) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.

Powder coated pressure die cast aluminium compact LED street light fitting 1x 12 watt complete with LED lamp and connected all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230 Votls, 50 Hz including testing complete all as specified and directed Make : C&S Cat Part No LTESS12W LED or equivalent in Philips/ CG

Ceiling fan of size 1200 mm sweep having (BEE 5 Star rating) complete and connecting up including provision of three core 1.0 Sqmm copper conductor cable from ceiling rose/connector to Fan. Cat part No ES-50 5 White/Ivory of make Havells or equivalent in Bajaj/CG.

Exhaust fan ventilating type of plastic body of size 250 mm sweep complete with all accessories and including connecting up with three core twisted flexible copper conductor cable of size 1.0 Sqmm of 230V, 50 Hz of Cat part No DXWHT/BLK Make Havells or equivalent in Bajaj/CG.

18 W LED tube(4 ft) having minimum 2000 lumens with extruded engineering plastic housing polycarbonate diffuser, G-13 polycarbonate end cover, the LED with 120 degree view angel>120 lumen/watt, lumen maintenance 70% at 50000 hrs colour temperature of 5000-6500 K<70 colour rendering the driver must be integral APFC and constant current type having THD<20% and power factor>0.9 with reverse polarity protection and open circuit protection. Make : Surya Model No SLE TL DS 18 PC including 1x18 watt LED box type fixture suitable for 18 W LED tube comprising of pre coated MS box complete with all accessories or equivalent in Bajaj/Havells/Philips.

Indore decorative aluminium extruded T 5 LED batten type fitting 1 x 10 W- 2 Ft white complete with LED tube light and all prewired accessories. MAKE : C&S Cat Part No LTTB2F-10WLEDW or equivalent in CG/Philips

MCB SP 240 V, 50 Hz, 10 KA of rating (0.5-5 Amp) made from moulded self exinguishing thermostate plastic and suitable for C curve Cat Part No. CSMBS1C5 of make: C&S or equivalent in Havels/Legrand.

Single pole MCB 6 to 32 Amps 240 V, 50 Hz AC made from moulded self exitinguising thermostate plastic and suitable for 'c' curve, 10 KA breaking capacity. C&S Cat part No CSMBS1C6-32 or equivalent in legrand/hager/seimens.

Total amount of Sch 'A' Part-IV ( Sewage Disposal Works ) carried forward from pre-priced Schedule.

Total amount of Sch 'A' Part-V (Area Drainage Works ) carried forward from pre-priced Schedule.

Total amount of Sch 'A' Part-VI (Road/Path/Culvert Works ) carried forward from pre-priced Schedule.

Total amount of Sch 'A' Part-VII (Fencing/Gate Works ) carried forward from pre-priced Schedule.

Total amount of Sch 'A' Part-VIII (Retaining Wall and Stone Pitching Works ) carried forward from pre-priced Schedule.

Total amount of Sch 'A' Part-IX (Sec-I) (External Water Supply Works ) carried forward from pre-priced Schedule.

Sch 'A' Part-IX (Sec-II) (External Water Supply Works ) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.

Ductile iron pipe 150mm class K-7 ISI marked suitable for rubber gasket joint in any length laid in trenches, complete all as directed. Note :- Cost of rubber tyton joints is included in overall quoted rate.

Ductile iron pipe 100mm class K-7 ISI marked suitable for rubber gasket joint in any length laid in trenches, complete all as directed. Note :- Cost of rubber tyton joints is included in overall quoted rate.

Ductile iron fittings ISI marked suitable for DI pipes of class K-7 viz, bends, tapers any type (straight bend increasing, decreasing or double socket etc) Tee pieces single branch Y junction, double branch cross, collars, caps and plug, tail pieces etc for 100 mm , 150 mm dia pipe complete including provn of rubber tyton joints complete all as specified and directed. Note for Item No 12.01 to 12.03 :- (i) DI fittings shall be of same make as DI pipe class K-7 or as per make recommended by manufacturer of pipe , ISI marked & including provision of rubber TYTON joints. (ii) Make of DI pipe shall be LANCO/Jindal/TATA.

Supply, Installation and testing of electric driven centrifugal pumping set, 3 phase 415 volts 1450 RPM of capacity 10 HP 40 mtr delivery head 920 LPM, Suction/discharge pipe 80 x 65 mm and with minimum 6m suction head with bronze impeller coupled with electric motor including PCC foundation pumping set will be installed on MS channel 100 mm size duly grouted in PCC with suitable size of nuts, bolts complete all as directed . Note :- Rate shall be inclusive of PCC foundation, MS channel & MS nuts & bolts). Make : Model LMAPM 102 TAA of Crompton Greaves or equivalent

Supply & fixing cast iron foot valve, Conforming to IS- 4038, flanged type complete with rubber gaskets including nuts, bolts, washer etc of size 100 mm dia complete all as directed.

Valve pit of size 90 cm x 90 cm x 90 cm (internal dimensions) ,brick construction, including all necessary excavation and earth work in any type of soil, returning, filling in disposal of surplus spoil to distance not exceeding 50 m and depositing where directed, PCC in foundation of the mix (1:4:8) type D-2, brick masonry in cement mortar (1:4) rendering 12 mm thick in cement mortar (1:4) internally and to exposed brick work/ concrete surfaces, finished even and fair. Mild steel angle iron 40 x 40 x 6mm frame MS sheet cover 3.15 mm thick with handle and locking arrangement, painting all the exposed MS work with two coats of synthetic enamel paint as approved by the GE over a coat of red oxide primer and painting all the MS work embedded in PCC with two coats of black bituminous paint complete all as specified, shown on drawing and directed.

Supply, install, testing and commissioning of CPRI approved LT panel board, indoor type, with front and back door openable type fitted with nuts, botls and washers fitted with knob and hinges, floor mounted, fabricated out of 2.00 mm thick MS sheet, LT panel shall be totally enclosed weather proof and vermin proof with front and rear opening with IP-65 protection duly powder coated with seven tank process incl connection, RYB, insulated with different colour code and sleeved insulator complete pre-wired and cable connection with copper conductor wire upto copper bus bar complete with frame for mounting of panel 45 cm above the ground level, made out of 50 x 50 x6 mm thick MS channel and grouting by providing PCC 1:3:6 type C-1, using 20 mm grade crushed stone aggregate including all incoming and outgoing cable connection with suitable size of copper lugs/gland complete all as specified and also comprising of the following:-

(a) MCCB 160 Amps 25 KA four pole 415 Volts - 01 No (b) MCCB TPN 63 Amps, 25 KA - 02 Nos (c) Indicators RYB - 01 Set (d) Copper strip bus bars sleeve insulated 300 Amps capacity TPN mounted on epoxy insulators - 01 Set (e) Digital voltmeter 0-500 V range 96 x 96 Sqmm size with In built VSS - 01 No (f) Digital ammeter 0-100 A range 96 x 96 Sqmm size with CTs and In built ASS -01 No (g) Internal wiring of the panel board with single core copper cable PVC insulated of suitable size and control fuses. (h) Fully Automatic Star -Delta Starter of capacity-10 HP ,Three Phase,415 volts with single phase preventer complete.-02Nos. Make-HAVELLS/SIEMENS/ L&T. (j) Cable entry glands and two Nos earthling terminals. Note:- Rate for item No 12.07 & 12.08 shall be quoted at item No 12.07

Total amount of Sch 'A' Part-X (Sec-I) ( External Electrification Works) carried forward from pre-priced Schedule.

Sch 'A' Part-X(Sec-II) (External Electrification Works ) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.

Energy efficient LED based streel light 60 Watt complete with dicast aluminium body, POT optics reflector and acrylic cover including all standard accessories as per design of manufacturers complete all as directed. Make : Bajaj 169680BRTFG60W LED or equivalent in Philips/Havells/Surya

Brackets for street light fittings made out of 40 mm dia GI pipe Light grade, bent to shape 1.5 mtr long fixed to pole, wall including provision of two sets of clamps made out of flat iron of size 50 x 6 mm including provision of bolts, nuts and washers complete all as directed.

Pole junction box sheet moulded compound (SMC) type with hinged door and locking arrangement of size 300x250x150mm comprising of Aluminum bus bar 63 Amps two Nos, one No MCB single pole of capacity 05 to30 Amps 240 volts 9 KA and single core PVC FRLS copper conductor 2.5 Sqmm for connection from junction box to street light complete , including MS clamps fabricated from 25x3mm MS flat iron, nuts , bots etc for mounting complete all as directed.

LT Cubical panel board Indoor Type , front and rear opening with dust proof vermin proof made of 2.00 mm thick CRCA sheet steel factory made . CPRI approved suitable for operation on 415 volts ,50 HZ, AC supply conforming to IP-65,including suitable size of four pole aluminum bus bar complete with frame for mounting of panel 45 cm above the ground level ,made out of 50x50x6mm thick and grouting by providing PCC 1:3:6 type C-1,using 20mm graded crushed stone aggregate and powder coated with seven tank process including provision of the following items :-

(a) MCCB 4 pole adjustable and thermal magnetic setting, 250 Amp, 415 Volts, 35 KA - 01 No (incoming) (b) MCCB 4 pole Fixed type, 63 Amp, 415 V, 16 KA - 03 Nos (outgoing) (c) MCCB 4 pole,fixed type,32 Amps, 230 V, 10 KA - 02 Nos (outgoing) (d) Copper bus bars sleeve insulated 400 Amps capacity TPN mounted on epoxy insulators - 01 Set (e) LED indicator lamp RYB (Set of 3) - 01 Set (f) Digital voltmeter 0-500 V range 96x96 Sqmm size with inbuilt VSS - 01 No (g) Digital ammeter 0-200 Amps range 96 x 96 Sqmm size with CTs and in built ASS- 01 No (h) Internal wiring of the panel board with single core copper cable PVC insulated of suitable size and control fuses. (j) Cable entry glands and two Nos earthling terminals. (k) Interconnection of bus bar and MCCB with suitable size and colour coat including PVC sleeves etc. Note:- Rate for item No 14.04 & 14.05 shall be quoted at item No 14.04

Supply. Installation, testing and commissioning of diesel engine driven generating set 100 KVA , 80 KW at NTP (0.8 PF) at 415 volts, AC supply 3 phase 50 Hz four wire directly coupled to diesel engine water cooled with radiator mounted on common base plate complete with inbuilt tank of capacity as per manufacturers specifications, vibration damper enclosure and other accessories all specified as under and comprising of as per Particular Specification Clause No 29 complete all as specified and directed. Make : Engine - Cummins engine model No 6BTAA5.9-G13 or equivalent of Kirloskar/Crompton/Ruston Alternator :- Stamford or equivalent of Kirloskar/Electric/ Alstom (Makes of the engine & the alternator shall be so decided so as to ensure compartivility) (A) Diesel Engine- Diesel engine 6 cyclinders,4 stoke cycle , water cooled, turbo charged, developing 159 BHP, 1500 RPM under NTP conditions of BS 5514. The enigne shall be provided with electrical starting arrangement and shall give electrical out put of 100 KVA / 80 KW and 0.8 PF 415 Volts at the alternator terminal inclusive of the following standard accessories :-

(a) Radiator / heat exchanger cooling system (b) Spider coupling guard (c) Fly wheel (d) Fly wheel housing complete with starter gear ring and coupling (e) Fuel pipes (f) Air Cleaner (g) Fuel and lub oil filter (h) By pass filter (j) Coolant inhibitor (k) Fule pump (l) Water pump (m) Lub oil pump (n) Self / electric starter DC (o) Battery charging Generator (p) Industrial silencer (q) Lub oil cooler (r) Flexible pipe for silencer (s) Battery Volt meter (t) Water temp gauge, lub oil pressure gauge (u) Speedo meter & engine running hours meter (v) Display for fault (w) Turbo charger

(B) Alternator :- Single bearing alternator suitable for continous operation generating 100 KVA at 1500 RPM, 415 volts,0.8 PF (Lag) 50 Hz , 3 Phase, 4 wire system, confirming to BS 5000/ IS- 4722. The alternator shall be brushless type, screen protected, revolving field, self exicted, self regulated through and AVR. Alternator shall be with following features :- (a) + 1.0% Voltage regulation (Max) in static condition (b) IP 23 protection with insulation class H (c) Permissible over laod of 10% for 1 Hr in 12 Hrs of operation (C) AMF Panel - complete all as per manufacturers specification suitable for DG set for capacity of 100 KVA grouted in floor with PCC foundation manufactured with 14/16 gauge CRCA sheet and shall be power coated for a weather proof and long lasting finish of suitable size consisting of the following :- (a) Contactor ML 12 -03 Nos with auxiliary contacts 2 Nos + NC+03 Nos each (b) Aluminium bus bar of current rating 300 Amps capacity with in / outgoing terminals (c) Electronic latch circuit with tripping indication (d) Reset facilities (e) 03 phase MVR relay unit with single phase protection complete with alarm and power contactor (f) Electronic timer 220 volts for main contactor with 1 No NC auxiliary contactors

(r) Accoustic enclosure with natural air circulation with out loss of any power for ventilation fan. The enclosure shall be modular construction with hinge volted structured to provide easy dismantling and shall be made out of high quality CRCA sheet of 1.6 mm thick with sufficient accessories for maintenance work, openable and lockable door with air tight rubber gaskit, interior lighting arrangement. Note:- Rate for item No 14.06 ,14.07,14.08,14.09 & 14.10 shall be quoted at item No 14.06

Rubber Matting ISI marked 12mm thick of 1 x 2 M size to cover the area in front of in door control panels and LT equipments complete all as directed.

Total amount of Sch 'A' Part-XI (Excavation and Earth work for Site Clearance) carried forward from pre-priced Schedule.

Sch 'A' Part-XII (Maining & Operation of STP) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.

Manning & operation of STP of capacity 350 Cum/day and all associated connected accessories at Somgarh Srinagar to keep installations in functional condition in three shift per day (each shift 08 hrs)including sunday and holidays i.e from 0800 Hrs to 1600 hrs, 1600 hrs to 2400 hrs & 2400 hrs to 0800 hrs including maintaining log sheets and other periodical, maintenance record complete all as specified and directed by employing qualified staff/Engr-in-charge :- (a) 03 Nos. of Operator-cum-technician per day i.e One operator cum technician per shift of 08 hours. (b) 01 No. of helper in three shift (each shift 08 hrs.) i.e0800 hrs to 1600 hrs, 1600 hrs to 2400 hrs and 2400 hrs to 0800 hrs. (c) Mechanic required for day to day maint incl oiling and greasing and replacement of defective parts as per manufacturer instructions. No extra cost shall be given by the Deptt. However fuel/electricity and water if reqd by the contractor shall be provided by the Deptt on free supply basis.

NOTE-(A) SCOPE OF WORK - the manning and operation schedule mentioned above includes the following- (a) Removing of materials arrested at bar screen. (b)Removing of oil floating at surface. (c) Change over from one blower to other blower as per requirement. (d) Cleaning of air filter of blower regualarly on requirement basis. (e) Applying grease to all motor blower periodically including supplying of suitable quantity of grease (f) Draining of sludge from MBBR reactor once in a month. (g) Removing of sludge from tube settler depending upon actual load. (h) maintaining of log book for record of operation of plants including cost of stationary. (j) Back wash of dual media filter and activated carbon filter weekly or on required basis. (k) Cleaning of inlet and outlet mesh box of MBBR reactor weekly (l) Draining of burnt out lubricant oil and refilling of appropriate lubricant oil in air blower after 2000-2500 Hrs of operation incl cost of lubricant.

(B) The contractors quoted rates for the above item shall also be deemed to include the cost of following : (a) Maintenance of internal and external area of plant. (b) Watch and ward and care of Govt assets and equipment of the plant. (c)Maintenance of the saftey and security measure of the plant. (d) Keeping the installation neat and tidy. (e) In case of failure of main electric supply, Generator electric supply shall be used by the operator on the requirement basis. (f) All material brought at site for use shall be entered in MB for record purpose duly supported with relevant purchase voucher and test certificates. (g) Disposal of treated sewage/sludge as directed by the Engr-in-Charge. Note:- Rate for item No 16.01, 16.02 & 16.03 shall be quoted at item No 16.01

Total amount of Sch 'A' Part-XIII (Sec-I) (Defective Works) carried forward from pre-priced Schedule.

Sch 'A' Part-XIII (Sec-II) (Defective Works ) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.

Scarifying the exposed reinforcement of sunken floor slab and gunitting the cement concrete of grade M-25 Design Mix to such exposed surfaces and removal of seepage of defective work of sunken slab complete all as specified and directed.

Cleaning of clogged sewage line by rodding or other mechanical means and clearing the line for free flow of sewage as observed in defective work complete all as specified and directed.

M/S SYED NOORULLAH RIZVI (BID ID -3418902)