PROVISION OF RAIN WATER SHED AT DEFENCE COLONY MAIN GATE, MANKHURD UNDER GE (NW) MANKHURD

Amount

Excavation in trenches n.exc 1.5 m wide and n exc 1.5 m in depth for foundation and getting out in any type of soil.

Excavation in trenches n.exc 1.5 m wide and exc 1.5 m but not exc 3.0 m in depth for foundation and getting out in any type of soil.

Returning filling including spreading,levelling, watering & well ramming in layers not exc 25cm.

Removing of excavated material n. exc.50m depositing where directed/Incl filling the portion at disturbed area of earth.

M & L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation filling .

M&L for M-30 design mix as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L for M-30 design mix as in Columns, pillars, piers, posts and struts

M&L for M-30 design mix as in Beams, cantilevers, bressummers, lintels over 1.5m span

Formwork to sides of concrete foundations, footings, bases ofcolumns, raft and raft beams sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Formwork to sides of pillars, posts, struts, piers, columns and stanchions

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and

M&L TMT steel bars 10mm dia & over, cut to length bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quali

M&L Same as per Item No 6 Above , but 5mm dia & over upto & including 10cm dia in stirrups, spacers & binders of TMT bars.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410 W (Gde E250) quality complete all as speciifed

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

M&L for two coats of synthetic enamel paint over a coat of red oxide to steel Surfaces of any description over 10cm grith or width, not otherwise described

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F aluminium section fixed to mild steel roof truss or concrete surfaces with stainless steel screws for fixing of aluminium composite panels including joining cleat, screws etc complete all as specified and directed.

Supply and fixing suspended false ceiling and vertical cladding using (ACP) Aluminium Composite Panel sheet 3mm thick to aluminium framework complete all as specified and as directed. Note: Aluminium framework will be measured under item No 17

Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.including 10mm thick backing coat in CM 1:3

Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out hard/dense soil

M/L hard core of gauge n.exc 63mm, deposited, spread, and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface

M/L for providing PCC 1:4:8 type D2 40mm graded aggregate as sub base 75mm thick

M&L for Chequered cement concrete tiles exc 0.40 Sqm and n.exc 0.90 Sqm, 25mm thick, with grey cement and pigment set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in CM 1:4

S&F 30 cm high, 5 mm thick and of 10 cm wide stainless steel grade 304 alphabets fixed where directed all as specified and directed.

Surface dressing n exc 15 cm deep in any type of soil

M&L M-30 for Walls, retaining walls, basement walls, ballast walls, slab & lintels and the like; any thickness; above top of footings; including attached pilasters and buttresses

Formwork rough finished surfaces to faces of walls, retaining walls, abutments, parapets and staircase railings, slabs, lintels and similar work including attached pillasters, buttresses, etc.; vertical or to batter

Damp proof course 40mm thick to horizontal or vertical surfaces including necessary formwork

M&L Pre cast cement concrete block masonry with solid blocks, exc 10cm in width and setting in mortor complete set in mortor 1:6 pre cast cement concrete Type C1 1:3:6 (20mm graded stone aggregate).

M&L for 10 mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing the surfaces of even and smooth, complete all as specified and directed, Make : Easy plast from M/s ceiling plast or chemplast or Readiplast from ultratech. Note : The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with the readi mix plaster and nothing extra shall be payable on this account.

M&L for 15mm thick (10mm + 5mm) in two coats polymer modified ready mix cement based plaster on the wall surfaces including finishing the surfaces of top layer even and smooth, complete all as specified and directed, Make : Easy plast from M/s wall plast or chemplast or Readiplast from ultratech. Note : The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with the readi mix plaster and nothing extra shall be payable on this account.

M & L for preparation of untreated plastered surface of wall and applying three coats of white wash

M & L for preparation for applying two coats or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal rsistance, dirt resistance exterior paint of required shades(Company Depot Tinted) with silicon additives @ 1.43 litre/10sqm over & including priming coat of extreior primer applied @ 0.90 litre/10 sqm over new surfaces

M&L for Vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match ,light shade over and including 15 mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.

M & L for APP modified roof treatment over existing roof slab etc to be executed through approved authorised applicator of the membrane manufacturer with the following specifications complete all as specified and directed:- (a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface. (b) Laying APP modified water proofing membrane reinforced with non woven polyester fibre weight not less than 160gm/Sqcm using butane torch by torch application with 10cm side lap and 15cm end lap. (c) Physical properties of membrane shall be as under:- (i) Membrane weight not less than 3.50 Kg/Sqm. (ii) Non woven polyester weight not less than 160gm /sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650N/Sqcm and transverse not less than 450 N/Sqcm (v) Tear strength-longitudinal not less than 300 N & transverse not less than 250 N. (vi) Elongation : > 20% in both directions. (vii) Impermeability/water tightness at 2 Kgf/cm2. (viii) Water absorption - Not more than 1% on mass within 24 hours. (ix) Cold flexibility - Minimum (-) 20C. (x) Dimentional stability % change = Maximum 1%.

M&L for Cement concrete in C1 type (1:3:6) using 20mm graded stone aggregate as in plinth protection and finished even and smooth with using extra cement.

S&F aluminium anodized window / door / partition shutters and frame, any type (sliding / non-sliding / openable), , fabricated, medium weight, including all necessary fittings / fixtures for door/partitions, etc., cleats suitable locking arrangements and arrangement to receive and fixing glass / wire cloth, etc. with aluminium beading, glazing cleats, and cadmium plated stainless steel screws including rubber gaskets, beading, etc. complete all as specified and as directed by the Engineer-in-charge Note: (i) Weight of rubber gasket and beading, handles, rollers, etc shall not be considered when measuring weight of aluminium shutter / frame . (ii) Glass / wire mesh shall be measured and paid separately.

Supply only 5mm thick glass pin headed ordinary quality in each pane for aluminimum sliding/openable window complete all as specified & directed by Engineer-in-Charge.

M&L for earthing using GI earthing strip 32 x 6mm complete with galvanised steel earth plate electode 600mmx600mmx6mm thick buried directly in ground, earth pit not less than 2.25 meters deep below ground level connection to and including GI strip of size 32x6mm to the extend 7.5 mtr as earth lead by means of GI bolts, Nuts etc. with provision of charcoal and salt all as per electrical plate No 3 of SSR Part I including water arrangement with GI Pipe 20 MM dia (medium Grade), earth lead protection pipe 50mm madium grade with bends, elbow etc. from earth plate to test point, excavation and earth work returning, filling, ramming and removing of soil to distance not exc 50mtr, make good to match with existing surface making PCC pit (Earth chamber) having internal size 30cm x 30cm x 30cm and outer size 60cm x 60cm x 60cm with RCC reinforced cover 50mm thick with one lifting handle made of 8mm dia MS bar funnel wie mesh and testing on completion including making test point on wall as per SSR specification all as specified and directed.

M & L for concealed point wiring complete with proper colour coding with 1100 Volts grade, 1.5 Sqmm PVC insulated FRLS, unsheathed, wire confirming to IS-694, Part II, ISI marked with multistranded copper conductor drawn in and including PVC concealed conduit of 20 mm dia size wall/ RCC slab/ ceiling/ colunms/ beams etc with all accessories, fittings, PVC junction boxes etc, with suitabe sunk pressed steel boxes for modular fittings not less than 1.6 mm thick, sockets, fan regulators etc, also including 1.5 Sqmm, PVC insulated, FRLS unsheathed, 1100 Volts multistranded copper conductor green colour as contineous earth wire connected to common earth dolly for one light point/fan/bell point controlled by one way switch, complete all as specified and directed. Note : Rates included for concealed cutting as required at site without any damage and making good in CM 1:4 and matching the surface as required 2 all screws and washer for point wiring shall be Stainless steel. Nothing is extra shall be admisible on this account

-ditto- all as per item No.42 above but for One 2pin/3 pin socket outlet 5 Amps on same board complete all as specified and directed.

-ditto- all as per item No. 42 above but for One 2pin/3 pin socket outlet 5 Amps on independent board complete all as specified and directed.

M&L for Concealed point wiring using proper colour coding with 1100 Volts grade, 4.0 Sqmm PVC insulated, FRLS, unsheathed, wire confirming to IS-694, Part-II, ISI marked with multistranded copper conductor drawn in and including PVC conduit (minimum 20mm in dia) with all accessories, fittings, PVC junction boxes etc, with suitable sunk pressed steel terminal boxes for modular fittings not less than 1.6 mm thick, also including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, multistranded, copper conductor 1100 Volts grade, green color, continuous earth wire connected to common earth dolly for 15 Amps, 3 Pin, socket outlet independent complete all as specified and directed.

S&F modular type 6A one way SP switch 1 module confirming to IS: 3854-1997 with fingure proof terminal complete all as specified and directed.

S&F modular type 2/3 pin combined shuttered type 6 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed.

S&F modular type 2/3 pin combined shuttered typr 16 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed.

S&F modular type 16 A one way SP switch 1 module confirming to IS: 3854-1997 with finguer proof terminal complete all as specified and directed.

S&F modular type 120W step fan regulator of 2 module size conformng to IS: 11037-1984 complete all as specified and directed.

S&F ceiling rose three terminal, 230 Volts PVC / Polycarbonate body, complete all as specified and directed.

S & F Modular Blank plate 1 module suitable for Modular switch boards all as specified and as directed

S & F Modular cover plate 6 modules

S & F Modular cover plate 4 modules

S & F Modular cover plate 3 modules

S & F 20-22 W capacity surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of > 100 lumen/W, CCT 4000K to 6000K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, CRI> 80, lamp burning hours not less than 50000, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50- 60 Hz, PF > 0.95, including electrical connection with 3 core flexible Cu conductor PVC insulated cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.Make : BAJAJ/JAQUAR/WIPRO

Supply & fix Heavy Duty metallic Exhaust fan high speed type of sweep 300 mm, speed 1400 RPM, air delivery 1300CMH, power 70W (approx) comprising of double ball bearing, blades,louvers complete mounting anchor fasteners, aluminium louvers made of aluminium sheet of 0.5 mm thickness, provision of three core 1.5 Sqmm PVC insulated copper cable from ceiling rose to fan etc complete all as specified and directed. Make-:Crompton/ Orient/ Almonard/ Bajaj Note -: The Contractor shall submit 1 years warranty certificate from OEM of exhaust fan.

M&L circuit wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 1.5 sqmm including 1.5 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete drawn in Rigid non metallic PVC conduit ISI marked of size 20 mm dia on surface wiring inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly complete all as specified and directed. Note :- Circuit wiring will be made in Hangers/Sheds, hight up to 10 Meters only.

S & F MCB DB, 4 way, SPN, double door, 240 Volts and including cutting chases in wall, concealing DB in wall, making good the disturbed surfaces and making all connections complete all as specified and directed. Note: Quoted rate shall be deemed to include for all civil works and provision of copper bus bar of 200 Amps rating. Make :-LEGRAND / SCHEINDER / L & T.

S & F MCB SP 5 to 32 Amps, 240 Volts, 50 Hz, 10 KA Breaking capacity 'C' series. Make :- LEGRAND/ SCHEINDER/ L&T

S & F MCB SPN 20 to 32 Amps, 240 Volts, 50 Hz, 10 KA Breaking capacity 'C' series. Make :- LEGRAND/ SCHEINDER/ L&T

Supply and fixing round shape 15-18 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make :- BAJAJ/ WIPRO/ JAQUAR/ PHILIPS

M&L for sub main wiring with two single core 6.0 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 1100 volts grade down in through non metalic PVC casing caping with and including PVC insulated 6.0 Sqmm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly all as specified and as directed. (Make :- PRESFIT/ PRECISION - Casing caping), (Make :- FINOLEX/ KEI/ BENLO/ POLYCAB - PVC Copper wire) Note : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping of 6.0 sqmm will be measured and paid one unit.

Supply and fixing LED street light fitting 30-35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing along with prismatic polycarbonate optic with IP66 ingress protection having 4 kv in built surge protection with top opening driver cover for easy maintenance, efficacy not less than or equal to 100lm/W, CCT 5700K complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics including MS clamps,bolts, nuts, washers, anchor fastners etc suitable for fixing security light of Cat No -: ENXT P 35L WH PO PC SD of Bajaj or equivalent from philips/Jaguar/ wipro/ CG, complete all as specifed and as directed.

S & F GI steel tubing medium grade 40 mm dia and length up to 1.5 meter bent to shape of offset angle upto 45degree for fixing of security /street light fittings including MS clamps made of 32mm x5mm flat iron, nuts , bolts, etc all as directed by Engineer in charge

Suply and fix New generation, Post-Top for 360 degree indirect lights with IP 65 LED light 40W,energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution,spun aluminium landscape luminaire with high power LEDs as light fitting with nut bolts,washer all as specified and directed in EIC. Make:- BAJAJ/ PHILLIPS/ JAQUAR/ WIPRO/ HAVELLS.

Joy builders

Parmatma Enterprises

AM ENTERPRISES

M/s Mukesh Engineers

SRINIVASA BUILDERS