PROVN OF CERTAIN ROUTINE B AND MAINT WORKS IN MD AND OTM ACCOMMODATIONS AT DIAT AND MILIT AND REPAIRS TO CERTAIN FENCING GATES AND RETAINING ETC AT DIAT DU GIRINAGAR PUNE 25

Amount

PROVN OF CERTAIN ROUTINE B/R MAINT WORKS IN MD AND OTM ACCN AT DIAT AND MILIT Dismantling of plain or corrugated steel sheeting ,any gauge thicKness ,including nanital or similar pattern roof covering complete all as specified & directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site complete all as specified & directed.

All as per item No. 2 above but n.exc 1.5 sqm each complete all as specified & directed.

Taking down shutters of any description n. exc. 1 sqm each complete all as specified & directed.

Demolition of stone/boulder ashlar facings, dressed stone work, precast concrete articles and precast concrete block walling built in cement mortar complete all as specified & directed..

M&L precast cement concrete block masonry with solid block, type C-1,1:3:6 mix ( using 20mm graded aggregate ), exc 10cm in width and setting in cement mortar 1:6, complete all as specified and directed.

S & F Pre-painted galvalume sheet of roof tile pattern/curved type/ any pattern (aluminium,Zinc and silicon coating) GI based,corrugated steel sheet minimum thickness 0.50 mm of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with self tapping screw including ridges and crimp eaves complete all as specified & directed.

M&L for Prepainted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screw as specified.

S&F rolled mild steel in joist, channels, angles or tee sections, fixed ,post independently without connecting plates, etc.,conf to Fe 410-W (Gde-E-250) quality 'B' complete all as specified & directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240 complete all as specified & directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.

M&L for first quality joint free Non Skid glazed ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tile excedding 0.11 sqm but not exceeding 0.18 sqm as in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM (1:4) complete all as specified & directed.

M&L for 1st quality, joint free glazed ceramic coloured tiles 300mm x 450mm x 7mm thick on verticle surface of walls set and jointed with neat cement slurry @ 3.00 Kg / Sqm and pointed in white cement with pigment to match the shade of tiles, over 10mm thick rendering in CM 1:4 complete all as specified & directed. .

Taking down cement plaster on brick or stone walls including raking out joints , hacking for key , scrubbing down with water etc.complete all as specified & directed.

M&L for Rendering 10 mm thick cement plaster in CM 1:6 on brick concrete or stone surfaces finished even & smooth without using extra cement complete all as specified & directed.

M & L for Rendering 15mm thick cement plaster in CM 1:4 on brick concrete or stone surfaces finished even & smooth without using extra cement complete all as specified & directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening complete all as specified & directed.

S & F pressed steel frames of size 165x60mm for doors with one or more rebates including necessary fixing lugs,hinges lock strike plate etc complete all as specified & directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type both sides (ISI marked) complete all as specified & directed.

S&F 300 mm long alluminium alloy anodised sliding door boit with haps ,staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy and fixed complete all as specified & directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, and fixing in the frame at site complete all as specified & directed.

S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed complete all as specified & directed.

S&F stainless steel butt hinges of size 100 mm complete all as specified & directed.

S&F extruded aluminium alloy handles, fabricated type, anodized of size 150 mm complete all as specified & directed..

M & L Sheet glass,ordinary quality 3 mm thick and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified & directed.

S & F Door closer hydraucally regulated designation No-3 ,universal type ,suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.(aluminium die cast)body complete all as specified & directed.

S & F Galvanised mild steel wire cloth,0.63 mm nominal dia of wire and avrage width of aperature 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified & directed.

S & F 35 mm Glazed and skelton shutters, open rebated and prepared to receive glass,gauze,etc.(without sash bar) edges for framing plain ,chamfered or rounded ,fitted with cut and mitred beads for securing glass etc,sizes of shutters complete all as specified & directed.

S&F viterous china flat back urinal bowl type of min size 465x355x265 mm, white, with grating and union of discharge pipe including connection to flush pipe and out going pipe, fixed in repair complete all as specified & directed.

S & F in repairs vitreous china padastal pattern, "EWC" coloured with 'P' trap110 mm and incl connection to trap, and to flushing pipe anti-syphonage pipe, etc. with & including flat PVC low level flushing cistern 10 Ltr capacity, complete all as specified and directed.

S&F plastic water closet seat back closed pattern with flat bottom and cover mild steel chromium plated hinging divice fixed complete all as specified & directed.

Supply and fixing faucet health (hand jet) 15mm bore with fittings, complete all as specified and directed.

Supply and fixing Chromium plated jet spray with CP connection pipe for EWC 15mm bore with fittings, complete all as specified and directed.

S&F in repairs Cromium plated brass bib cock ,cast copper alloy with capston headed handle, screwed down screwed for iron pipe or for brass ferule of 15mm dia all as spd and directed

S&F in repairs Stop valve cast copper alloy screwed down high pressure with capstan head, handle chromium plated angular type screwed both ends for iron pipe 15 mm bore or for unions complete all as specified & directed.

S&F in repairs Stop valve cast copper alloy with crutch or butter fly handle screwed both ends & screwed for iron pipe of 20mm dia complete all as specified & directed. .

S & F in repairs PVC connections 15mm size with PTMT nuts of length 450mm and fixed in repairs complete all as specified & directed.

Taking up or down steel tubing 15mm bore and connections including cleaning for refixing or removing from site

All as per item No. 38 above but 20 mm bore pipe.

S&F tube medium grade galvanized with all fitting and fixed complete to walls and ceiling or laid in floor bore of pipe 15 mm complete all as specified & directed.

S&F tube medium grade galvanized with all fitting and fixed complete to walls and ceiling or laid in floor bore of pipe 20 mm complete all as specified & directed.

S&F in repairs PVC floor trap, with grating including jointing to waste pipe fixed in cement complete all as specified & directed.

S&F soap dish any type fixed type fixed to plugs with chromium plated brass screws complete all as specified & directed.

Supply & fix 20mm bore ball vavle high pressure of PTMT with epoxy coated aluminium road and high density platic ball screwed for iron pipe and fixed complete all as specified & directed.

Dismantling water tanks exc 250 but N exc 500 lts capacity including disconnecting water supply pipes and removing from to store complete all as specified & directed.

S&F 500 litre capacity rotational moulded polyethylene water storage tanks cylindrical vertical with closet top hoisted and fixed in position all as specified in SSR (2009) Part I complete all as specified and directed.

Supply & fix 2.5 mm thick frosted one side sheet glass ordinary quality in square n exc 0.5 sqm each pane in new glazed shutter complete all as specified & directed.

S&F brass chromium plated tubular towel rail 20 mm dia complete all as specified and directed

S&F in repairs wash hand basin vitreous china (flat back) any size including cutting for and pinning in ends of brackets complete size (450x300mm) complete all as specified & directed.

M&L for 150 mm bore salt glazed stone ware drain pipes of grade 'A' laid in trenches and jointed and tested complete all as specified.

S & F Steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified & directed.

S&F Curtain rod 25mm dia 0.80mm wall thickness, mild steel, chromium plated power coated as per sample complete all specified and directed.

S&F Brackets at suitable dead end for fixing 25mm dia curtain rods complete all as specified.

S&F Brackets at suitable free end for fixing 25mm dia curtain rods complete all as specified.

S & F MS framed work such as grills gratings etc. with ends of bars shouldeed and / or riveted, or forged into spikes; framed guard bars and similar works conforming to Fe 290 Gde - E- 165 including welding etc complete all as specified & directed.

S & F 1.6mm MS plain , black sheet in wall cladding steel gates and similar items cut to size , holes punched incl round headed screws, clouts nails or rivets fixed to steel framing including welding etc complete all as specified & directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl brooming down of steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying one coat of white lime wash complete all as specified & directed.

M&L for preparation of plastered or unplastered old decorated surfaces of ceiling etc. incl pillasters and cornices etc. incl brooming down of steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying one coat of white lime wash complete all as specified.

M&L preparation of newly plastered surface of walls over 10 cm width or girth over a coat of approved primer and applying two coat of oil emulsion distemper (tint as approved by GE) over a coat of primer complete all as specified and directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stoping the connected previously treated surfaces and applying one coat of oil emulsion distemper (tint as approved by GE) complete all as specified & directed.

Material & labour for preparation of old painted wood or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified & directed.

M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer.

Material & labour for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified & directed.

Material and labour for preparation of old painted steel or iron surfaces of any description n exc 10 cm width or girth and applying one cost of synthetic enamel paint of approved tint or shade complete all as specified and directed by Engineer-in Charge.

M&L for preparation of newly plastered surfaces of walls over 10 cm width of girth over a coat of approved primer and appling two coats of acrylic emulsion exterior quality (tint as approved by GE) as in plain pattern complete all as specified.

Preparation of old decorated surfaces of walls/roof projection/chajja including concrete (plastered or un plastered) by brooming down and scraping wherever necessary and apply one coats of external waterproof emulsion paint Apex Ultima or equivalent including necessary scaffolding required for painting work, safety measures complete all as specified and directed

REPAIRS TO CERTAIN FENCING, GATES AND RETAINING WALLS ETC AT DIAT Demolition of reinforced cement concrete (reinforced cut to required to facilitate demolition) in any description and in any position not otherwise specifically provided for including removing debris outside of Md land complete all as specified & directed.

M & L for precast RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in cover slabs set in cement mortar (1:4) complete all as specified and as directed by the Engineer-in-Charge. (Note : Reinforcement to be measured and paid separately).

Mild steel bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.

M&L for PCC 1:3:6 type C1, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed.

S&F framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified & directed.

M&L for preparing new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M & L for 18 to 20 mm thick granite stone slab (of any type ) work (table rubbed and polished ) as in floor, gate/pillars/col, platform in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting and making good for disturbed surfaces and chamfering for exposed edges,surfaces fixed in repairs all as directed . (Colour decided by Engr-in-Charge)

M & L for 100 mm thick plain cement concrete type B2 using 40mm graded stone aggregate (1:2:4) as in hard standing /path etc or simillar works all as specified and directed by Engineer in charge

Dismantling floor, hearth or wall tiling/ chequered tile/interlocking tile including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.

S&F for glossy finished chequered cement concrete tiles 30cmx30cmx30mm/20 x 20 x25 mm (as approved) thick set jointed with grey cement and pigment and pointed in neat cement slurry including 15 mm thick screed bed of CM(1:6) in floors complete all as specified & directed.

M&L for 60 mm thick glossy finished cement concrete coloured interlocking pavers, pattern as approved, as in floors or pavements, laid on 30 mm thick stone dust cusioning, laid dry to the profile as directed incl filetting to the edges in CM (1:4), all manufacturer's instruction complete all as directed by Engineer-in-Charge

Taking down cement plaster of any description incl racking out joints hacking for key and scrubbing down with water to remove dust etc.complete all as specified & directed.

M&L for rendering 15 mm thick plaster in CM (1:6) on wall surface finished even and smooth without using extra cement complete all as specified & directed.

M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortor 1:6 complete all specified and directed.

All as item no 82 above but except stone complete all as specified & directed.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge n.exc 20mm and dressing face beds and joints as specified to random rubble walling brought upto courses complete all specified and directed.

M & L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1: 4 complete all specified and directed.

Dismantling fencing wire mesh,any type complete all as specified & directed.

Supply only, chain link fencing of MS galvanized fencing, any size or type complete all as specified & directed.

Fixing only chain link fencing including line wires, any mesh , size and type fixed to any type of standards, rails, straining bolts, etc., incliding provision of binding wire complete all as specified and directed Note : Supply only chain link fencing and line wire will be measeured and paid separetly.

S&F mild steel round bars 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooking ends stiffeners confirming to FE-410-W ( Gde E 250) quality-A or Fe 290 (Gde E-165) complete all as specified & directed.

M&L Mild steel flat iron fillets (for securing wire mesh) including all necessary drilling, bolting or riveting etc and similar work conforming to FE-290 Gde E-165 complete all as specified & directed.

S&F in repairs galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified & directed. (each line wire to be measured)

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed to other, or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut length of bolt n exc 5cm long and dia of neck 11 to 15mm complete all as specified & directed.

M&L for preparation of new steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of primer complete all as specified & directed.

Excavating in posts holes (or similar holes) in hard/dense soil each n.exc 0.50 cu.m getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm complete all as specified & directed..

M & L for plain cement concrete in 1:3:6 type C2 using 40mm graded stone aggregate as in foundation filling or mass concrete or simillar work all as specified and directed by Engineer in charge

S&F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed.

M/S K.D.MATE

PAWAN B SHINDE

M/S P D TUPE

Samyak Engineers