SPECIAL REPAIR TO TELEGRAPH ROAD HUSSAR ROAD SHANTI PATH FROM DET SIG GATE TO MUSEUM BACK GATE T POINT AND INTERNAL ROADS OF MH OFFRS MESS PERSONAL LINE AND MT AREA UNDER GE MIS MHOW

Amount

Scrifying or picking up gravelled,macadam or bituminous macadam surface in area not exc 400 Sqm and depth not exc 100 mm deep and removing to a distance not exc 50m and all materials thrown from site etc complete all as specified and directed

M&L for 75mm thick (compacted thickness) water bound macadam (WBM),with lime stone, sand stone, Flint or quartzite coarse aggregate of sand stone of grading 2 (63 to 40mm size),spread,rolled and consolidated with 8-10 tonne power roller to required gradient and camber complete all as specified and directed

Preparing surfaces of newly WBM surface with wire brushes for removing caked mud etc and sweeping with brooms and finally fanning to clean the surfaces with gunny bags to remove all loose dirt etc and applying evenly a tack coat with bitumenous primer using paving bitumen VG-30 at the rate of 10 kg / 10 sqm over WBM surfaces and applying premixed hot mix Asphaltic Semi Dence Concrete using 5.5% binder content (VG-30 Grade paving bitumen) by weight of total mix and with thickness of 30 mm (consolidated Thickness) including rolling with 8 to 10 tonne power road roller to uniform and smooth surface and consolidation to required gradient and camber all as specified and directed. (Note: - (i) Laying shall be done by means of self-propelled mechanical paver, finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing. (ii) Mix shall be obtained from hot mix plant and spreading shell be done by using mechanical paver only)

Preparing the black top surfaces of roads by brushing with wire brushes for removing caked mud etc and sweeping with brooms and finally fanning to clear the surface with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat with paving bituminous primer VG- 30 at the rate of 5 kg per 10 sqm of road surface by using paving bitumen binder over black top surfaces and applying premixed hot mix Asphaltic Semi Dence Concrete using 5.5% binder content (VG-30 Grade paving bitumen) by weight of total mix and with thickness of 30 mm (consolidated Thickness) including rolling with 8 to 10 tonne power road roller to uniform and smooth surface and consolidation to required gradient and camber all as specified and directed. (Note: - (i) Laying shall be done by means of self-propelled mechanical paver, finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing. (ii) Mix shall be obtained from hot mix plant and spreading shell be done by using mechanical paver only)complete all as specified and directed

Material and labour for premix bituminous macadam (consolidated thickness not more than 75 mm) with 4% binder content of paving bitumen of grade (VG-30) by weight of total mix laid and rolled with 8-10 tonne power roller to required gradient and camber up to outer edges of roads on existing black top surfaces complete all as specified and directed. NOTE: - (i) Cost of testing charges, materials and transportations etc for job mix formula shall be inclusive in the unit rate and no extra payment shall be admissible on this account. (ii) Mix shall be obtained from hot mix plant and spreading shall be done by using mechanical paver only.

Material and labour fo repair to pot holes not exceeding 1 sqm area including sweeping free from dust and mud or water scoring sunken surface in road,path etc cutting around edges at least 30mm in depth & making good by filling in ,screened and graded road metal,watering and well ramming (including supply of road metal) and making good by applying tack coat @ 10 Kg/10 Sqm of VG-30 ,Grade paving bituminous binder,complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick (below or above ground level) complete including removal of debries out side MD land complete all as specified and as directed.

M&L for PCC (1:4:8), type D-2, using 40mm graded stone aggraegate as in sub base of floor finish fair and even complete all as specified and as directed.

M&L 80 mm thick Machine Pressed Precast concrete interlocking Paver block glossy look any shape and size as approved by GE confirming to IS 15656 2006, M-40 grade with grey cement and pigment dry & joints filled over and including 30mm thick fine sand cushioning complete all as specified and directed.

M& L for providing precast cement concrete kerb blocks(machine pressed),solid,cement concrete type B-1,1:2:4 (20mm graded aggregate) finished at top bullnosed shape and finished surface even and smooth and jointed in cement mortar 1:4 stuck finished including necessary earth work complete all as specified and directed.

S&F two coat synthetic enamel paint over a coat of primer including preparation on newly brick or contrecte surfaces of any description over 10cm width or girth ,not otherwise described complete all as specified and directed

S&F two coat synthetic enamel paint including preparation on old brick or contrecte surfaces of any description over 10cm width or girth ,not otherwise described complete all as specified and directed

Surface dressing n. Exc. 15cm deep and averaging 10cm deep and removing surplus soil to a distance n exc 50M complete all as specified and directed.

M & L for laying of 100mm thick (spread thickness) moorum / Red bajri filling in road side berms, laid in layers n exc 15 cm thick, spread, levelled and rammed including consolidated to required gradient and camber etc complete all as specified and directed.

Material and labour for marking lines,dashes,arrows,letter etc 15 CM wide on bituminous surface with retro reflective thermoplastic road marking paint with reflector sing glass beads@ 250 gms per sqm area conferming to MOST & BIS specification ,of thickness 2.5-3 .0 mm thick of white/golden/yellow as approved colour/shade and applied with machine as per manufactures instruction including preparation of surface ie cleaning of surface by removing all dust ,dirt,oil grease etc complete all as specified and directed

Supply and fixing in repair ladwa 3M reflector plastic road stud cat eyes (yellow colour) made of poly carbonate moulded body with electro nically welded prismatic retro range on both sides of maximum retro reflection in wet and dry condition to be fixed with bituminous adhesive BT-69 complete all as specified and directed. (Make - 3M/Sun Eyes/Dark Eye/Oscar road safety)

S&F in repair super delux quality solar stud of Aluminium body including solar- powered by monocrystal solar panel. One high capacity Ni-Cd rechargable battery Approximate 1000 mtrs LEDs- 010, 3 pieces each side and total 6 pieces are used for high brightness of different colours back up- 12 hours of comtinous lightening at night. Make - SUNEYES/ Dark Eye / 3M/Alcolite/solar ) complete all as specified & directed.

M/s ESS KAY Construction

M/S BABULAL SURAJMAL

sabir and brothers

BHATIA ASSOCIATES

Auto Traders

Miittal Construction

m/s bansal construction

M/s Gupta Constructions