REPAIRS TO AREA DRAINAGE, BOUNDARY WALL , FENCING AND ITS ALLIED WORKS AT ZONE A AT ZAKHAMA MIL STN

Amount

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles. and removing debries outside MD land at the location decided by the Engineer-in-charge complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal of debris out of MD land at the location decided by the Engineer-in-charge complete all as specified and as directed.

Demolition of cement concrete of any description & in any position not otherwise specifically provided for.(Roof Kerbs) and removal of debris out of MD land at the location decided by the Engineer-in-charge complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete.complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete.complete all as specified and directed.

M & L for cement concrete type B2 1:2:4 (using 20mm graded stone aggaregate ) as in surface channels and drain, complete all as specified and directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM (1:6). complete all as specified and directed.

All as per item No 7 above but except stone

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for Pre-Cast Plain Cement Concrete (1:3:6) type C1 (using 20mm graded stone aggregate) as in bond stone set in Cement Mortar (1:4) complete all as specified and directed..

M&L for Plain Cement Concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in copping. complete all as specified and directed.

Extra over stone walling for 20mm hammer dressing of face and joints of Random Rubble walling, uncoursed or brought upto courses. complete all as specified and directed.

M&L for raised pointing to random or ploygonal rubble, uncoursed or brought upto courses in cement mortar (1:4) , complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 making finshed even and smooth without using extra cement. complete all as specified and directed.

M&L for Preparation of new plaster surfaces and applying two coats of cement base paint over one ocats of alkali resistance primier complete all as specified and directed.

M&L for Preparation of new plaster surfaces and applying three coats of white wash complete all as specified and directed.

M&L for Preparation of old plaster surfaces and applying one coats of white wash complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

Dismantaling fencing wire mesh, any type , complete all as specified and directed.

Demolition of reinforced cement concrete / RCC Jali of any description and in any position , complete all as specified and directed.

M & L for 25 mm thick Providing precast cement concrete jallies, type B0, 1:2:4 (using 12.5 graded stone aggaregate ) (measured solid), including all mouldings set in cement mortar 1:4 complete all as specified and directed.

Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm but n exc 250sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed.complete all as specified and directed.

S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M & L for cement concrete type B2 1:2:4 (using 40mm graded stone aggaregate ) as boundary pillars and post complete all as specified and directed.

M & L for RCC Type B1 1:2:4 (20 mm graded aggregate) aggregate)Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Use & waste for formwork to flat soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. complete all as specified and directed.

M & L for Mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. complete all as specified and directed.

Rameshwar Prasad

M/S RAHUL TRADING CO.