Improvement of Water Supply Scheme in Thottiam Town Panchayat,Tiruchirappalli District

Amount

Earth work excavation and depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches having bed width 1.25m & below for laying of pipes for water supply and sewerage works in the following type of soils as directed by Departmental officers. Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandy loam and ordinary soil

Pumping Main

Flanged DI Pipe 200mm

Feeder System

HDPE PN 10 200mm

HDPE PN 10 160mm

HDPE PN 10 140mm

HDPE PN 10 110mm

Distribution System

HDPE PN 6 200mm

HDPE PN 6 160mm

HDPE PN 6 140mm

HDPE PN 6 110mm

Supplying and conveying to site, the following sizes of HDPE pipes of class PN6 (PE-100) & PN6 (PE-60) confirming to IS:4984/1995, as specified in Technical Specifications in standard lengths including labour charges for loading, unloading and stacking at site and transportation charges etc., complete as per standard specifications and as directed by the Engineer in Charge

Feeder System

HDPE PN 10 200mm

HDPE PN 10 160mm

HDPE PN 10 140mm

HDPE PN 10 110mm

Distribution System

HDPE PN 6 200mm

HDPE PN 6 160mm

HDPE PN 6 140mm

HDPE PN 6 110mm

Supplying and conveying to site, the following sizes of Ductile Iron class PN10 Flaged Pipes as per IS 8329/2000

200mm DI Flanged Pipe (2.5m Pipes)

Loweing HDPE pipes and specials to trench and laying to proper grade and alignment and as directed by the Department Officers

Feeder System

HDPE PN 10 200mm

HDPE PN 10 160mm

HDPE PN 10 140mm

HDPE PN 10 110mm

Distribution System

HDPE PN 6 200mm

HDPE PN 6 160mm

HDPE PN 6 140mm

HDPE PN 6 110mm

Jointing HDPE Pipes and Specials by butt fusion welding / electro fusion welding joints using fusion equipment as per ISO 21307-2011 and as per IS 7634 (part-2) : 2012 including cost of hire charges for butt fusion equipment power supply arrangements etc., complete as per directed by Department Officers.

Feeder System

HDPE PN 10 200mm

HDPE PN 10 160mm

HDPE PN 10 140mm

HDPE PN 10 110mm

Distribution System

HDPE PN 6 200mm

HDPE PN 6 160mm

HDPE PN 6 140mm

HDPE PN 6 110mm

Supply, delivery of HDPE Specials As Per IS 1736-1995 including unloading, transportation and stacking charges. Specials for HDPE pipes as per IS 8360/1977/Part 1(Reaffirmed 1992) Part II and III(Reaffirmed 2002). Reaffirmed to IS 4984-2016 conveyance to work site etc., complete as directed by the Engineer in charge

Equal Tees

Feeder System

dia HDPE PN 10 200mm

dia HDPE PN 10 160mm

dia HDPE PN 10 140mm

dia HDPE PN 10 110mm

Distribution System

HDPE PN 6 200mm

HDPE PN 6 160mm

HDPE PN 6 140mm

HDPE PN 6 110mm

Bends - 90 Degree Bend PN6

Feeder System

dia HDPE PN 10 200mm

dia HDPE PN 10 160mm

dia HDPE PN 10 140mm

dia HDPE PN 10 110mm

Distribution System

HDPE PN 6 200mm

HDPE PN 6 160mm

HDPE PN 6 140mm

HDPE PN 6 110mm

End Caps

Distribution System

HDPE PN 6 200mm

HDPE PN 6 160mm

HDPE PN 6 140mm

HDPE PN 6 110mm

Supply, delivery to site, fixing, & commissioning of CI Scour valve including specials C.I. A/F Tee, PVC Tail Piece, C.I. D/F Pipe, C.I. Sluice Valve, C.I. Double foot Bend, C.I. Semicircular bend, Surface Box, Bolt Nut & Rubber Insertion. etc complete as per specification

Feeder System

Supply, delivery to site, fixing, & commissioning of CI Scour valve 125 mm CI Scour Valve in 200 mm HDPE - . including specials C.I. A/F Tee, PVC Tail Piece, C.I. D/F Pipe, C.I. Sluice Valve, C.I. Double foot Bend, C.I. Semicircular bend, Surface Box, Bolt Nut & Rubber Insertion. etc complete as per specification

Supply, delivery to site, fixing, & commissioning of CI Scour valve 100 mm CI Scour Valve in 160 mm HDPE - 1 No. including specials C.I. A/F Tee, PVC Tail Piece, C.I. D/F Pipe, C.I. Sluice Valve, C.I. Double foot Bend, C.I. Semicircular bend, Surface Box, Bolt Nut & Rubber Insertion. etc complete as per specification

Supply, delivery to site, fixing, & commissioning of CI Scour valve 100 mm CI Scour Valve in 140 mm HDPE - 1 No. including specials C.I. A/F Tee, PVC Tail Piece, C.I. D/F Pipe, C.I. Sluice Valve, C.I. Double foot Bend, C.I. Semicircular bend, Surface Box, Bolt Nut & Rubber Insertion. etc complete as per specification

Supply, delivery to site, fixing, & commissioning of CI Scour valve 80 mm CI Scour Valve in 110 mm HDPE - 1 No. including specials C.I. A/F Tee, PVC Tail Piece, C.I. D/F Pipe, C.I. Sluice Valve, C.I. Double foot Bend, C.I. Semicircular bend, Surface Box, Bolt Nut & Rubber Insertion. etc complete as per specification

Distribution System

Supply, delivery to site, fixing, & commissioning of CI Scour valve 100 mm CI Scour Valve in 160 mm HDPE - 1 No. including specials C.I. A/F Tee, PVC Tail Piece, C.I. D/F Pipe, C.I. Sluice Valve, C.I. Double foot Bend, C.I. Semicircular bend, Surface Box, Bolt Nut & Rubber Insertion. etc complete as per specification

Supply, delivery to site, fixing, & commissioning of CI Scour valve 100 mm CI Scour Valve in 140 mm HDPE - 1 No. including specials C.I. A/F Tee, PVC Tail Piece, C.I. D/F Pipe, C.I. Sluice Valve, C.I. Double foot Bend, C.I. Semicircular bend, Surface Box, Bolt Nut & Rubber Insertion. etc complete as per specification

Supply, delivery to site, fixing, & commissioning of CI Scour valve 80 mm CI Scour Valve in 110 mm HDPE - 1 No. including specials C.I. A/F Tee, PVC Tail Piece, C.I. D/F Pipe, C.I. Sluice Valve, C.I. Double foot Bend, C.I. Semicircular bend, Surface Box, Bolt Nut & Rubber Insertion. etc complete as per specification

Supply delivery to site, fixing & Commisioning of kinetic air valve for handling more volumes of air in pumping main, double orifice kinetic air valve confirming to IS 14845 tamper proof design (PN-1) and with 5 years warranty including loading and unloading at site, transporting charges taxes and duties etc., as directed by the engineers of the following sizes.

Double Air Valve 50mm

Size -1.00 m x 1.00 m x 1.20 m

Barricading work (Where the lines are in narrow width of municipality area, busy streets like Market, Bus-stand and in the Highways etc.) for laying of pipe line using casurina poles at 1.50m center to center (8cm to 10cm dia. and 1.80m height) vertical with horizontal poles in two rows, painting the vertical poles in the road facing sides with ready mix paint, tying the vertical and horizontal poles with coir rope including supplying, delivery and fixing of GI sheet (0.90m x 0.8mm thick) in the horizontal poles and fixing 75mm dia. reflectors including earth work excavation for fixing vertical posts and finally removing and stacking the materials safely for further use etc., complete and as directed by Department Official.

Barricading work (Where, there is less traffic areas and broader roads etc.) for laying of pipe line using casurina poles at 1.50m center to center (8cm to 10cm dia and 1.80m height) vertical with horizontal poles in three rows including painting the vertical poles in the road facing sides with ready mix paint, tying the vertical and horizontal poles with coir rope including fixing charges and fixing 75mm dia reflectors including earth work excavation for fixing vertical posts and finally removing and stacking the materials safely for further use etc., complete and as directed by Department officers.

Refilling the trenches with excavated earth (other than sand) in layers and watering, ramming and consolidation as per standard specification etc complete and as directed by Engineer in charge

Feeder System

dia HDPE PN 6 200mm

dia HDPE PN 6 160mm

dia HDPE PN 6 140mm

dia HDPE PN 6 110mm

Distribution System

dia HDPE PN 6 200mm

dia HDPE PN 6 160mm

dia HDPE PN 6 140mm

dia HDPE PN 6 110mm

Labour charges for cutting of B.T road or WBM roads for laying of mains and as directed by Engineer in charge.

B.T Road

Labour charges for cutting of C.C road for laying of mains and as directed by Engineer in charge.

C.C Road

Testing of pipes for water supply with hydraulic testing equipment by filling with water (including cost of water) and testing to recommended pressure in convenient stretches and attending the bursts if any occured during the test, excluding the cost of pipes but including other incidential and operational charges etc., complete for the following diametres of pipes

Feeder System

dia HDPE PN 10 200mm

dia HDPE PN 6 160mm

dia HDPE PN 6 140mm

dia HDPE PN 6 110mm

Distribution System

HDPE PN 6 200mm

HDPE PN 6 160mm

HDPE PN 6 140mm

HDPE PN 6 110mm

Supply, delivery to site, fixing, & commissioning of CI Sluice valve, Pressure Reducing and flow limit control valve, Electromagnetic flow meter including specials C.I. D/F pipe, PVC Tail Piece with Flange, Bolt Nut & Rubber Insertion (exluding Valve Pit)

At DMA Entry

Supply, delivery to site, fixing, & commissioning of100 mm Sluice Valve, 100mm Flow Control Valve, 100 mm Electromagnetic Flow meter in 110 mm HDPE PN6 main - 7 Nos.

Supply, delivery to site, fixing, & commissioning of 150 mm Sluice Valve, 150 mm Flow Control Valve, 150 mm Electromagnetic Flow meter in 160 mm HDPE PN6 main - 15 Nos.

At DMA Entry

For 110mm Dia. HDPE Pipe - 1.85m x 1.30m x 1.20m

For 140mm & 160mm Dia. HDPE Pipe - 2.27m x 1.30m x 1.20m

House Service Conneciton

House Service Conneciton - 20mm - Providing House Service Connection with MDPE 20mm pipe (Supply, lowering, joining and testing) electrofusion tapping saddle PE 80 Blue, PN 12.5 with female threaded metal insert of SS 304, Brass Ferrule as per IS 319 grade of sizes 15mm, 20mm, 25mm size and threaded to suit the corresponding bore sizes of 15mm dia size (1/2") Poly propylene compression male threated adaptor with metal insert of SS 304, Poly propylene 90 degree compression Female Threaded adaptor with metal insert of SS 304 and protection box of size 20cm x 30cm for fixing of Water Meter all as per standard including road cutting, replacement of utilities providing House Service Connection, reffilling, restoration of roads/drains testing etc Complete with matirials and as per IS specification as instructed by department officiers

Civil Works

Earth work excavation and depositing on bank with initial lead 10m and lift of 2.0m in the following classification of soils, bailing out water wherever necessary including providing danger lights etc., and as directed as per specification

Depth upto 2.00m

hard stiff clay, stiff black cotton soil, hard red earth , shales, murams,gravel, stoney earth and earth mixed with small boulders and hard gravelly soil

Soft disintegrated rock, laterite, soft rock or kankar, not requiring blasting

Second Depth 2.00m - 3.00m

Medium Rock and Dense Medium Rock not requiring

Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Upto 1.5m below GL

1.5m to 4.5m below GL

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Upto 1.5m below GL

Providing steel centering for plain surfaces including strutting upto 3.29 metre high using MS sheets, 10 gauge thick of size 90 cm x 60 cm, stiffened with Ms angles of size 25 mm x 25 mm x 3 mm laid over silver oak joists of size 10 cm x 6.5 cm spaced at 90 cm c/c and supported by caserne props of 10 cm to 13 cm diametre spaced at 75 cm c/c and removing the centering and shuttering after specified period without damaging the concrete laid, complying with standard specification and as directed by the Engineer.

SIDE SURFACE

Up to 3.30m Above GL

PLAIN SURFACE

Up to 3.30m Above GL

3.30 - 4.30m above GL

4.30 - 5.30m above GL

6.30 - 7.30m above GL

7.30 - 8.30m above GL

10.30 - 11.30m above GL

11.30 - 12.30m above GL

15.30 - 16.30m above GL

SQUARE COLUMN SURFACE

Up to 3.30m above GL

3.30 - 4.30m above GL

4.30 - 5.30m above GL

5.30 - 6.30m above GL

6.30 - 7.30m above GL

7.30 - 8.30m above GL

8.30 - 9.30m above GL

9.30 - 10.30m above GL

10.30 - 11.30m above GL

11.30 - 12.30m above GL

12.30 - 13.30m above GL

13.30 - 14.30m above GL

14.30 - 15.30m above GL

15.30 - 16.30m above GL

CIRCULAR COLUMN SURFACE

Up to 3.30m above GL

3.30 - 4.30m above GL

4.30 - 5.30m above GL

5.30 - 6.30m above GL

6.30 - 7.30m above GL

7.30 - 8.30m above GL

8.30 - 9.30m above GL

9.30 - 10.30m above GL

10.30 - 11.30m above GL

11.30 - 12.30m above GL

12.30 - 13.30m above GL

13.30 - 14.30m above GL

14.30 - 15.30m above GL

CURVED SURFACE

Up to 3.30m above GL

3.30 - 4.30m above GL

14.30 - 15.30m above GL

15.30 - 16.30m above GL

Providing and Iaying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000, using 20 mm and down graded hard broken granite, stone jelly for all RCC items of works with minimum cement content of 400 kg/m³ and maximum water cement ratio of 0.45, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 m³) 7730 Kg. of 20 mm machine crushed stone jelly and with about (3.3 m³) 5156 kg. of 10 - 12 mm machine crushed stone jelly and with about (4.79 m³) 7670 Kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra, etc complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards.

Beyond 1.5 m below GL

Below GL & upto 1.5 m

Above G.L upto 4.50m height

Above 4.50m to 7.32m ht., from G.L

Above 7.32m to 10.98m ht., from G.L

Above 10.98m to 14.64m ht., from G.L

Above 14.64m ht., to 18.30m ht.,

Above 18.30 m to 21.96m ht., from G.L

Supplying, fabricating & placing in position of Steel Reinforcement using mild steel or ribbed tar steel rods, for all RCC works as per the design given by the departmental officers including cost of steel cutting, bending, placing in position & binding with binding wire and all labour charges for cutting, bending, tying & placing in position etc.

Brick work in CM 1:3 (one cement & Three Crushed Stone Sand (M- Sand) using ground moulded chamber bricks of size 9"X4 3/8"X 2 3/4" standard specification including finishing, curing, etc., complete complying with standard specification - 100cft

Pump Room - 6m x 4m

Height Upto 4.50m

Height Upto 4.50m - 9.00m

Infiltration Well

Ceiling plastering and finishing all RCC exposed surface such as RCC slabs, sunshade canopies, stair case steps, landing slab, etc. with cement mortar 1:3 (one part of cement three part of plastering sand) 10 mm thick including packing the surface and provided necessary cement mortar nosing, headings as per the size specification wherever necessary using the same mix as directed by the departmental officers etc. complete complying with standard specification.

Pump Room - 6m x 4m

Plastering the surface of walls with cement mortar 1:3 mix (one part of cement and three part of plastering sand) 12 mm thick finishing including cost and conveyance of all materials and labour charges for curing and all other incidental charges etc., complete complying with standard specification.

Pump Room - 6m x 4m

Plastering in cement mortar 1:3 mix (one part of cement and three part of plastering sand) 20 mm thick finishing including cost and conveyance of all materials and labour charges for curing and all other incidental charges etc., complete complying with standard specification.

Weathering Course with Concrete Broken Brick Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum

Pump Room - 6m x 4m

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Pump Room - 6m x 4m

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supplying and fixing in position C.I.Manhole covers (light or heavy duty) of 60 X 60cm in size in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), of best approved quality and as per standard specifications etc.,complete.

Porous Concrete in CC 1:4 for steining of Infiltration well excluding cost of centering but including curing etc., complete

Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete.

Pump Room - 6m x 4m

Fully panelled Double leaf - Window (without Ventilator) - 1.20 m x 0.90 m

Supplying and erecting pull and push type rolling shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc.,

Pump Room - 6m x 4m

ROLLING SHUTTERS (WITH ISI MONOGRAM)

Manually operated (up to 8 m2 area)

2T capacity hand operated over head Travelling (HOT) crane suitable for a span upto 6 Mtrs, and travel length upto 10 Mtrs. with clear lift upto 6 Mtrs. including gear type chain pulley block with GI chain and geared Travelling trolley complete with all accessories including girder

Pump Room - 6m x 4m

Supply and fixing in position of enamel water level indicator with all accessories of approved pattern and design etc., complete as per standard specifications and as directed by Engineer-in-charge

Labour charges for painting TWAD Board Emblem in accordance with the size and specifications as approved by the Board on the Service Reservoirs including cost of all consumables etc., complete and as directed by Department Officers.

Providing Cut stone set in CM 1:3 (one cement and three sand) using well dressed cut stone supporting inlet pipe of size 0.30 x 0.30 x 0.15m for service reservoir etc., complete as per standard specifications and as directed by Engineer-in-charge

Supplying and fixing in position of RCC M30 inside access ladder of following size using 20mm size HBS jelly including cost of all materials, centring, shuttering,strutting, fabrication and placing in position of reinforcement, finishing, curing etc. complete and as directed by Department Officers.

Construction of RCC spiral staircase in RCC M30 using 20 mm HBGS of required height for approach to the roof of Service Reservoir with RCC Handrails including earthwork excavation, providing CC 1:4:8 mix, RCC footing M30 mix, GL platform etc., and also including cost of steel reinforcement, fabrication charges, scaffolding, centering, precasting charges, cement, painting etc. complete as per standard specifications and as directed by Engineer. The staircase shall be braced to the column of service reservoir at suitable interval.

1.00LL OHT

2.00LL OHT

Providing and fixing of M30 Grade Concrete for ventilators of approved pattern including cost of cement, reinforcement, centering, shuttering, strutting etc., complete 0.30m dia

Supplying and fixing of M30 Grade Concrete using 20 mm HBGS for RCC Handrails of 0.91 m height over the top of roof slab of approved pattern and design including the cost of reinforcement, centering, precasting, finishing etc complete

Providing pipe connection by lifting pipes and specials in vertical direction and placing the same for required alignment including lifting the pipes and specials in various heights of inlet, outlet, overflow and scour including earthwork excavation conveying the pipe and specials into the trenches, laying to proper grade and alignment cutting, threading and jointing with jointing materials with required specification including labour charges and supply of valves pipes, specials MS Clamps to fix the pipes with the columns including all taxes duties and connected charges etc. complete and taxes duties and connected charges etc. complete and as directed by Engineer in charge.

Lifting and positioning of C.I Pipes in vertical direction for service reservoir pipe connection

Vertical laying up to 2m ht. from G.L.

Vertical laying from 2m to 4m.

Vertical laying from 4m to 6m.

Vertical laying from 6m to 8m.

Vertical laying from 8m to 10m.

Vertical laying from 10m to 12m.

Vertical laying from 12m to 14m.

Vertical laying from 14m to 16m.

Vertical laying from 16m to 18m.

Vertical laying from 18m to 20m.

Supply, delivery to site, fixing, & commissioning of CI Pipe for plumbing

Supply, delivery to site, fixing, & commissioning of CI Sluice valve

100mm Dia. D/F CI Sluice Valve

Supply, delivery to site, fixing, & commissioning of CI Specials

100mm Dia. D/F CI Specials

Jointing the C.I Double flanged pipes and specials with rubber insertion to with IS- 638(1979) and M.S. bolts and nuts of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc., complete.

100 mm dia C.I Double flanged pipes and specials

200 mm dia C.I Double flanged pipes and specials

Refilling with excavated soil (other than sand) complying with the standard specification for filling in foundation and basement

Sinking of infiltration well of 6.00 m internal dia below water level including all incidental charges using special tools and plants such as air compressor, helmet etc., complete including bailing out water below pilasters level

Infiltration Well

I depth of 2 m

II depth of 2 m

III depth of 2 m

IV depth of 2 m

V depth of 2 m

Supply, delivery and fixing of PVC moulded CI steps in position at 30 cm center to center in zig zag manner and as directed by the Department officers.

Infiltration Well

Providing GI ventilating arrangement of size 0.10m and as directed by the Department Officers

Infiltration Well

Labour charges for putting bore holes of size 3" to 4" in river bed in sandy and other loose soils using hand boring sets including the cost of hire charges, conveyance charges of hand boring sets, and complete as directed by Department Officers.

Infiltration Well

Providing for cutting edge using 12G MS sheets including the cost of fabrication welding and placing in position in the curb including supply of the MS sheet with necessary holding rod of 20mm dia.

Infiltration Well

Plugging the bottom of the well with coarse sand of approved sizes and grade as directed by the Board officers

Infiltration Well

Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation.

At Sump - 1500 lpm x 60 m

At Infiltration Well - 2000 lpm x 40 m

Supply and delivery of DI electric Capacitor KVAR with TNEB test certificate with acceessories confirm to IS 2834 and rate is inclusive of banking charges such as providing of copper bus bars with provision of adding at least 2 capacitors at later date, cable entry box , fabricating chargese. The rates are basic rates with inclusive of handling charges

Supply and delivery of floor mounting cubical type vermin and dust proof powder coated M.V. panel board made of 14 SWG MS sheet & MS angle iron frame work with enclosed 4 Nos of Aluminium bus bar of Electrolyte grade E.91,PVC sleeved of suitable size for phase and netural with hinged front door and railway type lock and key arrangements.The bus bar shall be of ample current carrying capacity with all interal wiring as per IE rules and as per IS 8633 and as per safty requirements of CEIG. The desgin of panel board should facilitate for quick operation of all switches from the front side. The panel board should be completed with all interal wiring including necessary twin copper earthing arrangements and consists of the componets for controlling incoming and out going supply ; rate inclusive of fabrication charges

Supply and delivery of wall mounted cubical type EB meter Box of required size with 3 compartments made of 14 SWG MS sheet, Aerial Board, fuse carrier-6Nos, CT for energy meter with copper bus bars,necessary clamps and other allied works to avail the EB power supply for pump room.......1set.

150mm dia Pressure Gauge and Vaccum guage including all accessories as per specification (For Suction and Delivery to be mounted on wall on Teak Wood Board) SOR 2022-23 Pg:123

a)supply and delivery of heavy duty 1.1 KV grade 3.5 x 95sq.mm-armoured aluminium conductor XLPE insulated pvc sheathed cable as per IS 7098 (Part I) to be laid in between EB pole - Meter Box - M.V. panel SOR 2022-23Pg.No:123

b) Laying the above cable as per IE rules inside the pumproom or in air SOR 2022-23Pg.No127

c)Jointing of the above L.T. cables 3.5 core 1.1 KV grade Armoured Aluminium conductor cable confirming to IS1554 Part I with ISI marking including jointing materials lugs,clamps,etc., SOR 2022-23 Pg.No:125

a)Supply and delivery of heavy duty 11 KV grade 3.5 x50sq.mm-armoured aluminium conductor XLPE insulated pvc sheathed cable as per IS 7098 (Part I) to be laid in between M.V. panel to ATS starter for 50 HP HSC SOR 2022-23Pg.No:123

b)Jointing of the above L.T. cables 3.5 core 1.1 KV grade Armoured Aluminium conductor cable confirming to IS1554 Part I with ISI marking including jointing materials lugs,clamps,etc., SOR 2022-23 Pg.No:125

a)Supply and delivery of heavy duty 1.1 KV grade 3 x 50sq.mm-armoured aluminium conductor XLPE insulated pvc sheathed cable as per IS 7098 (Part I) to be laid in from ATS starter to motor for 50 HP HSC pumpset SOR 2022-23Pg.No:123

b)Jointing of the above L.T. cables 3 core 1.1 KV grade Armoured Aluminium conductor cable confirming to IS1554 Part I with ISI marking including jointing materials lugs,clamps,etc., SOR 2022-23 Pg.No:125

a)Supply and delivery of heavy duty 11 KV grade 3 x 16 sq.mm-armoured aluminium conductor XLPE insulated pvc sheathed cable as per IS 7098 (Part I) to be laid in from M.V. panel to 18 KVAR capacitor

b)Jointing of the above L.T. cables 3core 1.1 KV grade Armoured Aluminium conductor cable confirming to IS1554 Part I with ISI marking including jointing materials lugs,clamps,etc., SOR 2022-23 Pg.No:125

Supply, Delivery and Fixing of the following items for obtaining Service Connection from E.B.Pole.

150 mm GI SERVICE PIPE to a length of 3m

150mm GI bend-3Nos

150mm GI Coupling-3Nos

Providing pump house wiring and lighting arrangements.

Providing pump house lighting wiring using PVC conduit pipes and specials with 2 runs 1.5 sq mm PVC insulated copper wire and 1 run 14 SWG TC wire for earthing for lights, 5 Amps plug points including switch box 5 Amps switch socket, celing rose and consumable suitable for pump house wiring

Supply and fixing LED INDOOR FITTINGS (LIGHT EMITTING DIODE) 24W LED 4000K 2 x 2 Square Type Recessed Fitting (vide page 185 of SR Book 2019-20 )

Supply and fixing LED OUTDOOR FITTINGS (LIGHT EMITTING DIODE) 30W LED Street Light Fitting

16 amps.3 pin flush type wall socket only.-3No SOR 2022-23 pg 194

Supply and delivery of safety appliances as detailed below SOR 2022-23 Pg.No:131 item 18

Electrical gloves tested to 11 KV /22 KV with wooden box dusted with french chalk powder -2Nos

Electrical quality 6mm thick rubber mat - 6 Nos

5 kg capacity ISI marked Dry chemical powder fire extinguisher - 2 Nno

Fire Bucket-3 Nos Hooked to MS stand -1 No

Laminated shock treatment chart - 2 NO

Wooden First Aid Box -1 no

Providing the following tools mounted on Teak wood Board to be fixed on the wall and in a teak wood box SOR 2022-23 pg:133

Connector Screw Driver 901 Taparia Make or equivalent - 1No

200mm Screw Driver 825 Taparia Make or equivalent -1No

200mm Cutting Plier Taparia Make or equivalent -1No

800gm Ball Pane Hammer with Handle Taparia Make -1No

DE Spanner set 6 to 32 Jhalani Make or equivalent

Twin GI Earthing as per IS 3043/1987 and I.E. rules including Earth pit (2 pits) with RCC slab and other civil works complete (upto 25 HP) (SOR 19-20/ Item 19.0/ P. 132)

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.

At Sump - 20 HP pumpset & At Infiltration Well - 20 HP Pumpset

Supply and delivery of CI D/F sluice valve with cap wheel as pe IS 14846/2000 PN 1.0 with ISI marking . The rates are inclusive of transportation charges, etc., (SOR -P- 66)

300 mm sluice valve - for 300mm main

CI D/F (outdoor use) Single Door/ Multi Door Non return valve conforming to IS 5312/2003(part I & II) to be fixed after Water meter/ Flow recorder on pumping main near Pump house with dash pot arrangement for 90% fast closing & 10% slow closing.

300mm Non return valve - for 300mm main

Supply and delivery of following CI pipe and spls. IS 1538/1993 , IS 7181/1986 & IS 1537/1996 (TWAD SOR 22-23-P- 38)

Delivery pipe

upto 200mm

upto 300mm

Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to the required specification with M.S. bolts and nuts complete (including cost of jointing materials) SOR 2022-23 Pg.251

Supply and delivery of Woltman model with removal mechanism water meters of following sizes with Dirt box confirming to IS 2373 with life cycle test certificate from FCRI/NABl Accredited lab.The water meters shall have magnetic drivers or mechanical drivers and shall be versatile for installation in any position.The meters shall be hydro dynamiacally ,hydrostatically balanced. The runner,runner chamber, pointers of the meter shall be as per ISO 4064 Class B specification.Dry dial excavated counter housing fully protected against flooding ensuring easy reading in all climates.

At Infiltration Well

300mm water meter with dirt box

Erection of water meter including earth work excavation ,labour charges from cutting and threading, convenyance,welding and hire charges for tools and plants etc complete and as directed

300mm water meter with dirt box

Supply and run of 4 x 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains