Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹12.4 LAccepted-AOC 24 824 GOVERDHAN COLONY MAIN BHIND ROAD GOLE KA MANDIR | 1 | Accepted-AOC Lowest bidder | |
| 2 | 2₹14.7 L+₹2.0 L (15.8%)Rejected-AOC 2788 FOURTH FLOOR GALI RAJPUTANA ARYA PURA SABZI MANDI NEW DELHI KAMLA NAGAR NORTH DELHI DELHI 110007 UDYAM DL 01 0057966 | NORTH DELHI | DELHI | 110007 | 2 | Rejected-AOC 2nd |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
30 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TUGHLAKABAD
GE AF TUGHLAKABAD SANGAM VIHAR PO NEW DELHI 110080
COMPREHENSIVE B/R REPAIR AND OTHER ALLIED WORK IN DGQA COMPLEX AT BADARPUR UNDER GE (AF) TUGHLAKABAD
2022_MES_535370_1
GE/TKD-25/2022-23
Open Tender
Civil Works - Others
Item Rate
180 days
GE AF TUGHLAKABAD
MES contractor enlisted having deposited Standing Security with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
8 documents required · 8 mandatory
₹500
GE AF TUGHLAKABAD
₹40,000
Yes
28 Oct 2022
2 Jul 2022
1 Aug 2022
9 Jul 2022
30 Jul 2022
16 Jul 2022
Amount
Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 Sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and directed by Engr-in-charge.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing and as directed by Engineer-in-Charge
S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 gauge thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed by Engineer-in-Charge.
S&F Aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws complete all as specified and directed by Engr-in-charge.
S&F Aliminium anodised barrel tower bolts, 150 mm long complete all as specified and directed by Engr-in-charge.
S&F Aluminium anodised handles, cast type anodised 125 mm long complete all as specified and directed by Engr-in-charge.
Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed by Engr-in-charge.
S&F Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM (1:6) complete all as specified and directed by Engr-in-charge.
S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM (1:6) complete all as specified and directed by Engr-in-charge.
S&F for pressed steel frames of size 75 X 60 mm for Cuboard frames with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM (1:6) complete all as specified and directed by Engr-in-charge.
S&F rolled section framed work for door/window chowkhats made out of mild steel angle iron 40mm x 40mm x 6mm including necessary cutting welding etc complete all as specified and directed by Engr-in-charge.
M&L PCC (1:3:6) type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and directed by Engr-in-charge.
Taking down shutter of any description exc 1.00 Sqm and n.exc 2.00 Sqm each and re-fixing the same in same opening complete all as specified and directed by Engr-in-charge.
Taking down shutter of any description exc 1.00 Sqm and n.exc 2.00 Sqm each and removal from site complete all as specified and directed by Engr-in-charge.
S&F 2nd class HW 35mm thick local made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-charge.
S&F 35 mm thick glazed skeleton shutters open rebated and prepared to receive gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats complete all as specified and directed by Engr-in-charge.
S&F of Continuous (piano) hinges, stainless steel, bright finish or electrogalvanised complete all as specified and directed by Engr-in-charge.
S&F of 25 mm thick flush shutter, ISI marked, solid core construction with block board core and plywood face panels commercial face panels, commercial type on both sides complete all as specified and directed by Engr-in-charge.
S&F of 19 mm thick medium density flat pressed three layer particle board extension grade quality with 5 mm thick teak wood edging on one side bottom and top and other side 10 mm teak wood edging with rebate suitable for cup board shutters complete all as specified and directed by Engr-in-charge.
S&F in repair of galvanised mild steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed by Engr-in-charge.
S&F of 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-charge.
S&F of 300 mm long mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified and directed by Engr-in-charge.
S&F of 200 mm long mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed by Engr-in-charge.
S&F of 150mm long oval type mild steel pressed handles, ISI marked stove enamelled black complete all as specified and directed by Engr-in-charge.
S&F of 100 mm long aluminium anodised hasp and staple safety tape including bolts to hinge plate and fixed with screws complete all as specified and directed by Engr-in-charge.
S&F in repairs of Steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat painting complete all as specified and directed by Engr-in-charge.
All as per Item No 26 here-in-before but without glazing bars complete all as specified and directed by Engr-in-charge.
S&F in repairs of steel ventilators with top hung shutters including hinges steel peg stay complete all as specified and directed by Engr-in-charge.
M&L for sheet glass ordinary quality 3.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames complete all as specified and directed by Engr-in-charge.
All as per item No 29 but pin head type, figured glass complete all as specified and directed by Engr-in-charge.
M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coasts of synthetic enamel paint (for steel surfaces) complete all as specified and directed by Engr-in-charge.
M&L for preparing wood or wood based new surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-charge.
S&F in repairs of vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed by Engr-in-charge.
S&F in repair of PVC low level cistern of 10 ltrs capacity with top push button inclusive of brackets and PVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make complete all as specified and directed by Engr-in-charge.
S&F in repair of wash hand basin of size 550 x 400 mm vitreous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed by Engr-in-charge.
S&F in repair of 15mm bore chromium plated Pillar cock screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by Engr-in-charge.
S&F in repair of PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directed by Engr-in-charge.
S&F in repair of 15 mm bore Angle stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-charge.
S&F in repair of brass chromium plated shower rose 125 mm of size with arme and with or without swivel joints to steel pipe or union complete all as specified and directed by Engr-in-charge.
S&F in repairs of 15 mm dia bore concealed stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and directed by Engr-in-charge.
S&F in repair of brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed by Engr-in-charge.
S&F in repair of CP soap tray fixed to walls with rubber plugs complete all as specified and directed by Engr-in-charge.
S&F in repair of 15 mm dia bore bib taps cast copper alloy with crutch and butterfly handle, screwed for iron pipe, or for brass ferrule complete all as specified and directed by Engr-in-charge.
S&F in repair of sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, etc complete all as specified and directed by Engr-in-charge.
S&F in repair of 125mm dia grating doom with/without waste hole of PTMT (Minimum weight 40 gms) complete all as specified and directed by Engr-in-charge.
S&F in repair of 25mm dia fancy type PVC coated on MS Pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed by Engr-in-charge. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.
M&L in replacement of brass face spindle of existing 15mm dia bore concealed stop cock fixed as in repairs complete all as specified and directed by Engr-in-charge.
M&L in replacement of brass face spindle (half turn / full turn) of existing 15mm dia bore bib cock, stop cock, angle valve, C P Pillar cock, Wash basic mixture and wall mixture of any description complete all as specified and directed by Engr-in-charge.
S&F in repair of double action floor door spring hydraulically regulated made up of aluminium 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed by Engr-in-charge.
Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed by Engr-in-charge.
Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed by Engr-in-charge.
S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors complete all as specified and directed by Engr-in-charge.
S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors complete all as specified and directed by Engr-in-charge.
Refixing only old GI tubing 15 mm bore pipe and connections in new or old position as on walls ceiling floors etc all as specified Note: Rates quoted by the contractor deemed to be included S&F new fittings as required. Make: Tata/Prakash/Jindal ISI mark
All as per item 55 here in before but 20 mm bore complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-charge.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove rust,etc. complete all as specified and directed by Engr-in-charge.
M&L for 15 mm thick Screed bed or bedding layer in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed by Engr-in-charge.
M&L for non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floors, complete all as specified and directed by Engr-in-charge.
M&L for Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm. in floors etc complete all as specified and directed by Engr-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing, removing serviceable tiles and rubbish off the premises) complete all as specified and as directed by Engr-in-charge.
M&L for 10 mm thick rendering in cement mortar (1:4) and finish the surface rough to receive the tile finish etc complete all as specified and directed by Engr-in-charge.
M&L for non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm on vertical surfaces such as skirting etc complete all as specified and directed by Engr-in-charge.
M&L for glazed ceramic coloured tiles 7mm thick 450 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. etc complete all as specified and directed by Engr-in-charge.
M&L for machine cut kota stone slab flooring 20-25 mm thick (minimum size 55 cms x 55 cms) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing complete all as specified and directed by Engr-in-charge.
M&L for Screed bed or bedding layer of mortar 20 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed by Engr-in-charge.
M&L for machine cut kota stone slabs as in vertical surfaces such as risers of steps 20-25 mm thick over 10 mm thick cement rendering (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing also moulding edges complete all as specified and directed by Engr-in-charge.
M&L for 18- 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-charge.
M&L for Granite 18-20mm thick (of any size) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture or pigment to match with shade of granite old dismantling complete all as specified and directed by Engr-in-charge.
Rounding to the edge of stone slabs on edge such as cooking platform/steps complete all as specified and directed by Engr-in-charge.
Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc complete all as specified and directed by Engr-in-charge.
S&F of 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps as directed 6 Kg/Sq cm complete all as specified and directed by Engr-in-charge.
S&F of 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified and directed by Engr-in-charge.
Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall, laid in trenches incl all fittings & accessories complete all as specified and directed by Engr-in-charge.
Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed by Engr-in-charge.
S&F of 100mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but fixed to wallS&Fixing with clamps complete all as specified and directed by Engr-in-charge.
S&F of 75mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but fixed to wallS&Fixing with clamps complete all as specified and directed by Engr-in-charge.
S&F of 100 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door, complete all as specified and directed by Engr-in-charge.
S&F of 75 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door, complete all as specified and directed by Engr-in-charge.
S&F in repairs of 100mm dia of CI floor trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 in repair complete all as specified and directed by Engr-in-charge.
S&F in repairs of 75mm dia of CI floor trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 in repair complete all as specified and directed by Engr-in-charge.
Demolition of brick work of any type built in cement mortar in foul condition etc complete all as specified and directed by Engr-in-charge.
M&L for brick work built in cement and sand mortar (1:6) with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius complete all as specified and directed by Engr-in-charge.
Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engr-in-charge.
M&L for Rendering 15mm thick in patches in cement mortar (1:6) on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement
M&L for Rendering 15mm thick in patches in cement mortar in (1:4) on fare face of brick work or concrete surfaces even and smooth without using extra cement & with using integral water proofing compound complete all as specified and directed by Engr-in-charge.
M&L for Rendering 5mm thick in patches in cement mortar in (1:3) on ceiling complete all as specified and directed by Engr-in-charge.
M&L for brick work built in cement and sand mortar (1:4) with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius complete all as specified and directed by Engr-in-charge.
M&L for providing plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in copings, benching etc. including form work complete all as specified and directed by Engr-in-charge.
M&L preparing new surfaces of walls and applying two coat of Oil bound distemper on new surface complete all as specified and directed by Engr-in-charge.
All as per item No 91 above but three coat white wash on ceiling complete all as specified and directed by Engr-in-charge.
All as per item No 91 above but two coat of cement base paint on wall complete all as specified and directed by Engr-in-charge.
S&F in replacement of 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-charge.
S&F in replacement of 1000 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-charge.
S&F of 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete all as specified and directed by Engr-in-charge.
S&F of gun metal gate valves with iron wheel head 20mm complete all as specified and directed by Engr-in-charge.
S&F in repairs of PVC PTMT bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-charge.
S&F in repair 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ Sqcm fixed to wall or floor etc including fittings complete all as specified and directed by Engr-in-charge.
S&F of 1.0 mtr long aluminium door seal with screw complete all as specified and directed by Engr-in-charge.
S&F in repairs of vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or outgoing pipe and flush pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed by Engr-in-charge.
S&F in repairs of Health Faucet with 1.5 mtr long SS tube and hook complete all as specified and directed by Engr-in-charge.
Supply only water closet seat, white closed pattern with flat bottom & cover & mild steel chromium plated hinging device complete all as specified and directed by Engr-in-charge.
S&F in replacement of pre cast perforated RCC drain cover (rectangular or square) the area of each cover should not be more than 0.5 square mtr and thickness of 60 mm each with holes manufactured with M-30 grade of concrete by Vibro compaction process using accurately designed molds and suitable reinforced to enable the covers to take load as specified i.e. 20 MT for heavy duty (when tested as per IS -12592) including cutting of grooves boh side for fixing of drain cover it complete all as specified and directed by Engr-in-charge.
Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-charge.
Use and waste form work to sides and soffits of floor, roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, over hangers etc also splays between floor and beam etc for rough finished surfaces of concrete flat complete all as specified and directed by Engr-in-charge.
M&L for Reinforced cement concrete (1:2:4) (Nominal Mix) Type B1 using 20mm graded stone aggregate as in slabs supported on walls, beams, and columns, in floors, roof, landings, balconies, canopies, deck slab and in shelves and the like complete all as specified and directed by Engr-in-charge.
M&L for MS TMT bar 8 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire annealed not less than 0.9 mm dia and conforming to Fe 500 or Fe 550D complete all as specified and directed by Engr-in-charge.
S&F in repairs of existing plastic syphon for low level cistern PVC of 10 ltr capacity complete all as specified and directed by Engr-in-charge.
Labour only in adjustment of the float valve or handle to without replacement of any part of the high level cistern & OHT of any size complete all as specified and directed by Engr-in-charge.
S&F of 25 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge.
Petty repairs for leaking water in bib tap, pillar tap, stop cock, angle valve, WHB mixture, wall mixture, concealed stop cock etc of any description any size by changing washer/jumper valve etc complete all as specified and directed by Engr-in-charge.
Petty repairs low level flushing cistern any size/description for repair of leaking water by adjusting/replacing the washer and adjustment of lever require for making the cistern functional complete all as specified and directed by Engr-in-charge.
Removal of air lock/blockage of water in GI tubing 15/20 mm bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete including new GI fitting if required for refixing complete all as specified and directed by Engr-in-charge.
Draining out water from existing PVC water storage tank exc 500 ltr and not exc 1000 Ltr capacity and cleaning solid deposted therein. Washing out with soap water or surf including taking down connection and refixing complete all as specified and directed by Engr-in-charge.
Easing of wooden door shutters/Almn door/PVC door shutter/Almn window (one unit shall comprising of one window/CB/show case/irrespective of number of leaves) for properly closing/opening tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc complete all as specified and directed by Engr-in-charge.
Easing of steel window shutter for properly closing/opening tightening of hinges by oiling greasing or by replacing of new box type hinges including necessary cutting & welding complete all as specified and directed by Engr-in-charge. Note:- One unit shall be comprising of one window irrespective of no of leaves/shutter work to be carried out up to 12 m height.
S&F in repairs of PVC corner bracket golden colour suitable for drapery rod as per sample complete all as specified and directed by Engr-in-charge.
S&F in repairs of PVC knobs golden colour suitable ISI marked As per sample complete all as specified and directed by Engr-in-charge.
S&F in repairs of MS Bracket suitable for drapery rod with nuts & bolts. As per sample complete all as specified and directed by Engr-in-charge.
S&F in repairs of PVC tank cover as in PVC over head tank cover including cover to be fixed in frame with threading system. The frame to be fixed with tank by 4 nos PVC nut bolts complete all as specified and directed by Engr-in-charge. The cover to be provided 500/1000 ltrs capacity.
S&F in repairs of ISI marked hydraulically regulated door closer die aluminum body type complete suitable for door shutter width of 851 to 1000 mm and weight between 61 to 80 kg complete all as specified and directed by Engr-in-charge.
S&F in repairs of wall mixture 15 mm bore dia cast copper alloy with cap capston chromium plated screwed down high pressure with or without lettered "Hot" or "cold" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-charge.
S&F in repairs of Basin mixture 15 mm bore dia cast copper alloy with cap capstan chromium plated screwed down high pressure with or without :Hot" or "Cold" long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-charge.
S&F in repairs of PVC bath room cabinet with mirror of size 432 mm x 311 mm complete all as specified and directed by Engr-in-charge.
S&F in repairs of bib cock 2 way double handle with flange 15 mm bore (for iron pipe) cast copper alloy fancy type chromium plated screwed down, complete all as specified and directed by Engr-in-charge.
Cleaning of the existing drain pipes up to 1.50 mtr depth by roding manually as required at site from manhole and well flushing after cleaning including getting out the sludge if any and liquid materials from connecting manholes, deposited in lines including removing the solids and sludge to outside defence land by covered transport and cutting the bushes around the manholes and on the route of the sewer line upto 1 metre width complete all as specified and directed by Engr-in-charge.
S&F in repairs of urinal half stall vitreous china coloured supplied with PTMT integrated spreader for even flow of water, installed with concealed 'Z' brackets, including brass chromium plated 32mm bore bottle trap, waste coupling complete all as specified and directed by Engr-in-charge.
M&L for dewatering /de-sludging of soakage well filled with of liquid or semi liquid waste by water sucking hydraulic pressure machine including cleaning of all sludge silt residue of both organic & inorganic nature by mechanical scrappers etc in any position & disposal off all the waste outside defence area as per prevailing rules of local authorities. The de-sludging of sewage soakage well is to be carried out up to the bottom slab of sewage sump/ sewage/soakage well/septic tank complete. The sewage well wall & bottom slab to be cleaned by water with high pressure upto entire satisfaction of Engr-in-charge including necessary safety precautions to be adhered during working as per the prevailing local authorities rules. Note: The quoted rates shall be included for hydraulic pressure machine for this item.
Cleaning away all grass, vegetation, dry leaves, plant, roots of small plant, removal of algae etc from top of building roof surfaces if distrubed during removal of plants/plant roots etc complete all as specified and directed by Engr-in-charge.
Maintenance and upkeep of sewage systems including removal of blockage from Nahani/Floor trap, water closet, soil/waste and vent pipes including fixtures/fittings such as junction, bend, Tee, pipe running on external wall of bldg junction holes of any description sewage line of any size including all manholes of any depth including cleaning & desludging upto final drop outlet in and the septic tank/returning flowing over of any description in any situation by using cycle rickshaw -01 Nos. within the premises (DGQA complex : office and residential) complete all as specified and directed by Engr-in-charge.
Note :- 1 (i) Inspection of sewage line and preventive repair/maintenance to be carried out by the contractor in routine without waiting for the complaints from users. The record of the same shall be maintained by the contractor. (ii) Manhole/gully traps to be inspected and air/rectification of any blockage be done and record of the same be maintained in register by the contractor. (iii) The complaint has to be rectified within 08 Hrs as given in complaint register, failing which penalty will be imposed @ Rs. 100/- per complaint day. (iv) The unit rates quoted for above items are aso includes to provide the following workers to execute the above works as well as to attend the complaint assigned by concerned JE. Contractor is also bound to deploy more man power if required to any of the item to execute the above work. 2. Tradesman & helper required daily (except holiday & Sunday) as under :- (i) 1 Plumber for all plumbing items in Sch 'A' Sec-I (ii) 1 Carpenter for all carpentry related items of Sch 'A' Sec -I (iii) 1 mason along with helper for all related item of Sch 'A' Sec-I 3. The labour as indicated in Note No 2 above shall be supervise by a supervisor of the contractor who will manage all the working labour till the time from 8.30 AM to 5.30 PM. 4. The labour as indicated in Note No 2 above shall be reported to the complaint cell at 8.30 AM and shall be left at 5.30 PM after handing over the receipt obtained from the users regarding attending the complaints. 5. The complaint shall be attended on the same day failing which a recovery of Rs. 100/- per day per complaint shall be made from the contractor's dues. 6. In case of absent of the any worker from the duty a recovery of Rs. 500/- for tradesman and Rs. 400/- for helper shall be made from the contractor's dues. 7. Attendance register shal be maintained by the contractor and same shall be signed by JE concerned everyday and by Engr-in-Charge at his /her surprises check.
Cleaning of sewage lines of size 150mm dia and over including man holes through chassis mounted Diesel run vehicles mounted hydraulic operated high pressure suction cum getting sewer cleaning machine KAMBI-10 LCHB fitted with international standard pumps having 3000 ltrs suction capacity operating by skilled operator with supervisor cum engineer for cleaning/ partial desilting of manholes and sewer lines as per guide lines laid in IS-11972 (1987) and complete all as specified and directed by Engr-in-charge. Note:- Jetting of the sewer line shall be carried out by high pressure system of w2200 PSI/Suction. The work shall be carried out as and when required basis for required lengths at various locations.
M&L for Cement concrete in foundations, filling and mass-concrete (1:2:4) type B-2 using 40 mm graded stone aggregate complete all as specified and directed by Engr-in-charge.
Dismantling Wrought iron or mild steel work of any description not otherwise provided for like flat angle complete all as specified and directed by Engr-in-charge.
M&L for rolled mild steel as in joist, channel, angle, or Tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths I.e. within 20mm of the length indicated) of GDE Fe 410-S, complete all as specified and directed by Engr-in-charge.
S&F of Welded steel wire fabric exc 4 Kg/ Sqm welded to steel section at any position complete all as specified and directed by Engr-in-charge.
S&F in repairs of Venetian blinds, vertical/Horizontal type, 100 mm wide with polyester fabric of approved colour and pattern with aluminium fittings, and top rail and nylon buttons / loops etc fixed cuttings and alteration if necessary wherever AC/ coolers exists including dismantling old unserviceable venetian blinds complete all as specified and directed by Engr-in-charge.
M&L for cutting holes into or through brick wall built in cement mortar and making good in cement mortar (1:3) or cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as required of superficial area n. exc 150 sq cm complete all as specified and directed by Engr-in-charge.
Dismantling of plain or corrugated steel galvalume sheet/valley gutter any gauge, thickness including nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-charge.
S&F in replacement of Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / Cladding to wall, fixed with self tapping screws sheet in any position complete all as specified and directed by Engr-in-charge.
Supply only Birla white cement complete all as specified and directed by Engr-in-charge.
M&L for preparation of old plastered surfaces of walls and applying one coat of Cement base paint of approved tint, complete all as specified and directed by Engr-in-charge.
M&L for preparation of old surface of brick/concrete wall surface by brushing, washing and applying one coat of exterior emulsion paint 100 % acrylic on old decorated surface complete all as specified and directed by Engr-in-charge.
M&L for preparation of old plastered surfaces of walls and applying one coat of Oil Bound distemper of approved tint, complete all as specified and directed by Engr-in-charge. Note: All holes/cracks to be filled with birla putty and making good to old surface
M&L for preparation of old plastered surfaces of walls and applying two coats of Oil Bound distemper of approved tint, complete all as specified and directed by Engr-in-charge. Note :- All holes/cracks to be filled with birla putty and making good to old surface.
All as per Item No 145 above but one coat white wash on ceilings complete all as specified and directed by Engr-in-charge.
M/S AKASH CONSTRUCTION COMPANY
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .