Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹24.7 L
EMD Value
₹49,400
Closing Date
3 Nov 2026, 11:00 am
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TENDER
13 conditions · 2 needing a document upload
No Financial credentials are required for tenders having advertised value up to Rs.50 lakhs.
No Technical credentials are required for tenders having advertised value up to Rs.50 lakhs.
27 conditions · 3 needing a document upload
Uploading of Scanned copy of Statement of Bank details, PAN & GST.
Compliance with Public Procurement (Preference to Make inIndia) Policy: This tender complies with Public Procurement(Preference to Make in India), Order 2017-Revision dated19.07.2024 of Department of Promotion of Industry and InternalTrade, Ministry of Commerce and Industry, Govt. of India (hereinreferred to as PP-PIM), circulated vide Ministry of Railways(Railway Board)'s letter No.2020/RS(G)/779/2/Pt.1 (E3322671)dated 20.08.2024, and all its amendments. Only Class-I localsuppliers (as defined in PP-PIM) shall be eligible to bid for list ofitems specified in Ministry of Railways (Railway Board)'s letterno.2025/RS(G)/779/3 (E3488356) dated 02.05.2025. For otheritems, only Class-I and Class-II local suppliers are eligible to bid.At the time of bidding, each bidder is required to indicatepercentage of local content (as defined in PP- PIM) and provideself-certification that the item offered meets the local contentrequirement for "Class-I local supplier"/"Class-II local supplier",as the case may be. If this self-certification is not submitted, thebid will be summarily rejected. For contracts above Rs.10 crores,the provisions of Para 9(c) of PP-PIM shall be additionallyapplicable. For the purposes of this NIT, the "local content" (asdefined in PP-PIM) requirement to categorize a supplier as"Class-I local supplier" is minimum 50% and for "Class-II localsupplier" is minimum 20%. Also, the Margin of PurchasePreference (as defined in PP-PIM) is 20%. The procedure forpreference to Make in India shall be as specified in PP-PIM.Uploading of self-certificate for meeting the local contentrequirement for "Class-I local supplier"/"Class-II local supplier",as the case may be (proforma attached). Non- submission of thiscertificate will lead to summary rejection of bid. ( Click here to download Format)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1) Hosadurga Road (HSD) - Construction of Type-II 8 units staff quarters at Hosadurga Road (HSD). 2) Construction of Rest house for Track machine staff and allied works at KAG(Kodaganur), DAD(Devargudda) and CHKE(Challakere).
Y-E-29-2026-27-106~SWR
Y-E-29-2026-27-106
Open
Works - General
180 Days
Unknown (Unspecified Location)
₹0
₹49,400
12 Oct 2026
12 Oct 2026
20 Oct 2026
124 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 17,75,659.43 | ||
| — | 400.00 | — | — | ||
| Excavation of cable trench, 450 mm. wide and 1000 mm. deep in all types of soil and refilling the cable trench as per detailed specification. | — | — | — | 55,548 | |
| — | 10.00 | — | — | ||
| Excavation of cable trench below the Rail Track/Road /Tiles 450 mm. wide and 1000 mm. deep in all types of soil and refilling the released ballast/refilling concrete/ Tiles to bring back to original surface. | — | — | — | 2,564.6 | |
| — | 50.00 | — | — | ||
| Supply of LTUG Cable with Alu conductor, XLPE insulated and armored, 4 x 25 sqmm as per IS-7098. | — | — | — | 11,500 | |
| — | 1450.00 | — | — | ||
| Laying of 4 x 16- 50 Sq mm LTUG cable with aluminum conductor including end terminations at both ends. This work includes Extension of power supply from the nearest power supply source in the excavated cable trench/in trough/on building walls/sheds/shelters etc. | — | — | — | 13,963.5 | |
| — | 400.00 | — | — | ||
| Laying of HDPE pipe of dia 110 mm for safety of cables. Including all the ends should be sealing with bituminous compound. | — | — | — | 14,592 | |
| — | 450.00 | — | — | ||
| Supply and laying of HDPE pipe 50 mm dia, PE 100, PN 6 for safety of cables and all the ends should be sealing with bituminous compound. | — | — | — | 37,075.5 | |
| — | 15.00 | — | — | ||
| Supply and Fixing of GI pipe of dia 50 mm. for cable rising & protection including clamping, fixing arrangements and sealing with bituminous compound. | — | — | — | 13,014.3 | |
| — | 8.00 | — | — | ||
| Supply, fixing, testing and commissioning of single-phase prepaid/postpaid smart meter having Bi-directional communication facility with suitable size box including 32 A DP MCB duly fixing clamps, bolts etc. required complete as per detailed technical specification. | — | — | — | 59,193.28 | |
| — | 8.00 | — | — | ||
| Supply and fixing of 1 phase energy meter box of suitable size with double door and with viewing MC along with suitable hardware and accessories complete. | — | — | — | 14,528 | |
| — | 200.00 | — | — | ||
| Wiring for circuit/ submain wiring along with earth wire with the 2 X 4 sq. mm + 1 X 4 sq. mm earth wire sizes of FRLSH / HFFR PVC insulated copper conductor, single core cable in surface / concealed medium class PVC conduit / cassing & capping as required at site. | — | — | — | 74,600 | |
| — | 800.00 | — | — | ||
| Wiring for circuit/ submain wiring along with earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire sizes of FRLSH / HFFR PVC insulated copper conductor, single core cable in surface / concealed medium class PVC conduit / casing & capping as required at site. | — | — | — | 2,48,800 | |
| — | 96.00 | — | — | ||
| Supplying and fixing suitable size GI / PVC box with modular plate and cover in front on surface / recess / concealed, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. / casing & capping as per site requirement. | — | — | — | 52,320 | |
| — | 144.00 | — | — | ||
| Supplying and fixing suitable size GI / PVC box with modular plate and cover in front on surface / recess / concealed, including providing and fixing 6 pin 15/16/20/25 A modular socket outlet and 15/16/20/25 A modular switch, connections etc. / casing & capping as per site requirement. | — | — | — | 94,896 | |
| — | 168.00 | — | — | ||
| Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH / HFFR PVC insulated copper conductor single core cable in surface / Concealed medium class PVC conduit / Casing & capping, with modular switch, modular plate, suitable GI / PVC box and earthing the point with 1.5 sq.mm FRLSH / HFFR PVC insulated copper conductor single core cable etc. as required. (Group - A). | — | — | — | 1,99,752 | |
| — | 4.00 | — | — | ||
| L.T. Earthing arrangements for hard soil using 50 mm C-Class GI Pipe- 2.7 Mtr length, soil treatment by spreading of 25 kgs each of salt and charcoal, duly painting earth pit with black paint and stenciling of earth resistance value with date, including supply and laying of 6 SWG G.I. wire and other hardware to connect equipment at site complete. | — | — | — | 21,142.6 | |
| — | 10.00 | — | — | ||
| Supply, erection, commissioning and testing of tubular G.I post 6 meter long, including foundation work, complete with light bracket suitable for illumination with loop in loop out box with SMC connector and 0.5 A MCB as per detailed specification. | — | — | — | 1,39,307.6 | |
| — | 10.00 | — | — | ||
| Supply of 45 Watt LED street lights, as per specification SWR/LED LIGHT FITTING(Indoor/outdoor)/001-2016 effective from 18.04.2016. | — | — | — | 32,190 | |
| — | 10.00 | — | — | ||
| Freight, Fixing and commissioning of LED fitting complete with suitable accessories. | — | — | — | 1,244.7 | |
| — | 80.00 | — | — | ||
| Wiring to street light fittings mounted on tubular light pole from cable loop in loop out box up to control gear box and light fitting with 3 core of 1.5 sq.mm PVC insulated flexible Copper wire taken through hollow portion of lamp post duly providing rubber gommets and sleeving at entry point to pipe. | — | — | — | 11,520 | |
| — | 8.00 | — | — | ||
| Supply, fixing and commissioning of 8 Way Double Door DP MCB Distribution Board Similar to M/s Havells with following switchgears (All 'C' Series ) DP RCBO 25 / 40 A with Sensitivity 30 mA- 1 no, SP MCB-16 A-1- 1 no, SP MCB 10 A-2 Nos along with 1 No. 1P+N SPD with required suitable hardware and internal wiring complete. | — | — | — | 67,804.16 | |
| — | 1.00 | — | — | ||
| Provision of outdoor type LT kiosk board, water tight weather proof double door locking arrangement with alum. Bus bar supporting PVC bushes/ fasteners on hylum sheet with grey enamel paint, provision of GI pipe for incoming and outgoing LTUG cables bottom entry painting of names/stickers, LT board shall be mounted on Cement concrete plinth min size 1000x800 mm & above ground level 400 mm with MS "C" channel with nut bolt, 63A 4 Pole MCB, 2 Nos domestic and street light 32 A MCB for street light 2 nos complete. | — | — | — | 19,941.92 | |
| — | 1.00 | — | — | ||
| Supply, fixing and commissioning of Time lite Distribution Board - Time lite 32 A 3 pole/230V-Digital time switch similar to M/s Indo Asian Catref TL032DB0. | — | — | — | 23,349.55 | |
| — | 24.00 | — | — | ||
| Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) motor ceiling fan with maximum power of 28 W, 1200 mm size 5 star rated with IR remote or latest / regulator as per site requirement and as per specifications. | — | — | — | 69,168 | |
| — | 24.00 | — | — | ||
| Supply, assembly, fixing and commissioning of 200 mm size BLDC Ventilating fan complete Similar to M/s. ATOMBERG Model no. Efficio. | — | — | — | 42,038.64 | |
| — | 32.00 | — | — | ||
| Supply, fixing, testing and commissioning of 18 - 22 watt 6500k batten 4 feet approximate length LED lighting fixture as per specification SWR/LED LIGHT FITTING (Indoor /outdoor)/001-2016 effective from 18.04.2016 or latest. Including all other required accessories complete. | — | — | — | 21,792 | |
| — | 32.00 | — | — | ||
| Supply, fixing, testing and commissioning of 10 watt, 2 feet approximate length, 6500 k LED batten fixtures Including all other required accessories complete. | — | — | — | 5,703.68 | |
| — | 32.00 | — | — | ||
| Supply and fixing of 9 W LED bulb along with holder and internal wiring complete similar to Philips Oval Shape Led Bulb 9 Watt (Philips) (9W B22 CDL). | — | — | — | 4,086.08 | |
| — | 8.00 | — | — | ||
| Supply and provision of doorbell AC operated type with all required hardware. | — | — | — | 1,588.08 | |
| — | 1.00 | — | — | ||
| Supply, installation, testing & commissioning of centrifugal type vertically multistage bore-well submersible pump as per the following technical specification. The Pump model QF duty point will be Flow 120LPM @ working Head 110 Mtr. The Pump design will be the Flow Range starting from 15 LPM to 130 LPM & Head Range of 150 Mtr. To 82 Mtr. Pump material to be like, Pump impeller-SS 304, Pump casing-SS 304, Pump Shaft- SS410 steel, Pump motor body- SS 304. The pump motor should be 5 HP BEE 5 star rated with warranty which will operate through 415V-AC/50 Hz standard power supply. The motor manufacturing and testing as per IS 8034-2018 or latest similar to Make CELVIN Model STKTP620. | — | — | — | 41,045.47 | |
| — | 1.00 | — | — | ||
| Supply erection commissioning and testing of 3 phase 5 HP Mono submersible pump working on 415 V 50 Hz AC supply BEE 5-star rating with warranty similar to Make CELVIN Model STKOMT24. | — | — | — | 28,786.44 | |
| — | 2.00 | — | — | ||
| Supply, fixing, testing and commissioning of 3 phase Submersible Pump control panel double door outdoor type made of 20 SWG Sheet steel with locking arrangements provided with (i) DOL Starter with Auto Switch, 3 Position Selection (Manual - Manual SPP - Auto) including volt meter, ammeter, LED pilot lamps BCH make, Cat No. CPEYSAGZ, (ii) TPN MCB-32 A for short circuit protection, (iii) Time Switch Minilec Make, Model-S2 TSR 1, (iv) Water Level Controller- Minilec make, Model-WLC D1, (v) Current Sensing Phase Failure Relay with selectable Dry Run & Overload Protection Minilec Make, Model-SPG D2. | — | — | — | 31,911.02 | |
| — | 300.00 | — | — | ||
| Supplying & fixing PVC insulated PVC sheathed copper conductor submersible 3 Core 4.0 Sq mm Flat Cable, ISI Marked in existing metal/ HDPE / PVC/ pipe/ in bore well/ in sump including fixing the cable to GI/HDPE pipe with suitable cable tags of following sizes etc. complete as required. | — | — | — | 55,800 | |
| — | 150.00 | — | — | ||
| Supply and fixing of heavy-duty uPVC column pipe coupler of 40mm dia, pressure 35 kg/cm2 with collars and other required suitable accessories complete. | — | — | — | 69,369 | |
| — | 20.00 | — | — | ||
| Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. | — | — | — | 11,960 | |
| — | 1.00 | — | — | ||
| Liaison work with EB officials in getting Power supply - making Agreement; Commissioning work exclusive of EB Deposit work. | — | — | — | 6,824.27 | |
| — | 240.00 | — | — | ||
| Wiring for circuit/ submain wiring along with earth wire with the 2 X 6 sq. mm + 1 X 6 sq. mm earth wire sizes of FRLSH / HFFR PVC insulated copper conductor, single core cable in surface / concealed medium class PVC conduit / casing & capping as required at site. | — | — | — | 1,15,680 | |
| — | 8.00 | — | — | ||
| Supply and provision of TV cable 20 Mtr with Socket 1 Module - 1 No. | — | — | — | 2,393.6 | |
| — | 8.00 | — | — | ||
| Supply and provision of telephone cable 20 Mtr with Socket 1 No. | — | — | — | 4,512.64 | |
| — | 8.00 | — | — | ||
| — | 8.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
AdvanceCorrectionSlips1-11toGCC-2022.pdf
ATTACHMENT
Annexure-V.pdf
ATTACHMENT
Proforma16.pdf
ATTACHMENT
Tender Booklet
ATTACHMENT
GCCApril-2022.pdf
ATTACHMENT
JPOintenderdocumnets.pdf
ATTACHMENT
AdvanceCorrectionSlips12toGCC-2022_compressed.pdf
ATTACHMENT
TB-ConstructionofTy-IIquarters8unitsatHSDTrackrestatKAGDADCHKE.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .