MAINTENANCE OF BUILDING AND INTERNAL SERVICES INCLUDING PERIODICAL SERVICES AT SDI AND REPAIR TO COMPOUND WALL, BARBED WIRE, CHAIN LINK FENCING AND SECURITY GATE AT ASTE, SDI, VISHWA VIHAR AND AKASH VIHAR UNDER GE(AF) MARATHAHALLI, BANGALORE

Amount

Dismantling Floor hearth or Wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises (Outside MD land) all as specified and as directed.

Material and Labour for Coloured Non Skid Ceramic tiles, size of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, 7 to 8mm thick in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the shade of floor tiles over Screed bed or bedding layer of mortar 15mm thick in Cement mortar (1:6) for laying floor finishes Complete including taking down old tiles all as specified and as directed.

Material and Labour for Coloured Non Skid Ceramic tiles, size of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, 7 to 8mm thick on Vertical surfaces such as Skirting/ dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles Over 15 mm thick rendering in Cement mortar (1:4) Complete all as specified and as directed. Complete including taking down old tiles all as specified and as directed.

Material and Labour for Coloured Non Skid Ceramic tiles, size of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, 7 to 8mm thick in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the shade of floor tiles Over Screed bed or bedding layer of mortar 15mm thick in Cement mortar (1:6) for laying floor finishes Complete including taking down old tiles all as specified and as directed.

Material and labour for coloured Non Skid Ceramic tiles, size of each tile exceeding 0.06 sqm but not exceeding 0.11 Sqm, 7mm thick in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the shade of floor tiles over screed bed or bedding layer of mortar 15 mm thick in Cement mortar 1:6 for laying floor finishes Complete all as specified and as directed.

Material and Labour for Coloured Glazed Ceramic tiles of size 350x250x7 mm or 450x350x7 mm thick on Vertical surfaces such as Skirting/ dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles Over 15 mm thick rendering in Cement mortar (1:4) Complete all as specified and as directed.

Taking down Chowkats with shutters of any description (with out taking off shutters from the frames) not exc 1.5 Sqm each Complete all as specified and directed.

Supply and Fixing of Solid PVC door frame of size 50mm x 47mm made out of 5mm thick single side prelaminated PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with the prelaminated sheet reinforced with MS square tube all as specified and as directed.

Supply and Fixing Factory made Solid Panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site all specified and as directed.

Supply and Fixing Butt hinges of 125mm size type B-21 extruded anodised aluminium alloy with galvanised mild steel hinge pin bright polished fixed to PVC Door with screws Complete all as specified.

Supply and Fixing 150 mm long Aluminium anodised, barrel tower bolts extruded section all as specified.

Supply and Fixing aluminium anodised alloy handles, cast type, of size 150mm complete all as specified.

Supply and Fixing 5.5mm thick tinted glass exc 0.5 sqm of each pane of superior quality fixed to aluminium frame works with rubber beadings including solar control film of 25 micron reflective type sticked to glass panes as per instructions of manufactures complete all as specified and as directed by Engr-in-Charge.

Repair and servicing to Aluminium door shutter n.exc 2.5 sqm area, including taking down shutters from frames, replacing or realignment of members, cleats, etc make door shutter to serviceable condition, refixing in same opening complete all as speccified and directed by Engr-in-Charge.

Supply and Fixing in repairs door closer hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg of aluminium (Die cast body), complete all as specified and as directed by Engr-in-charge.

Supply and fixing Prelaminated particle board 19mm thick interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination with screws to timber frame work as in dressing table & Cupboard including dismantling old unserviceaable boards all as specified and directed.

Supply and fixing in repairs 12mm thick Prelaminated Particle boards interior grade, solid core, general purposes type, with face veneers on one face of type 'BB', fixed, as in cup board, shelves etc including dismantling boarding, any description, fixed in any position with nails all as specified and directed.

Supply and fixing 12mm thick ply wood grade BWR type BB, fixed with screws to timber frame work including dismantling boarding, any description, fixed in any position all as specified and directed.

Supply and Fixing in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks, or galvanised wire staples all as specified and directed.

Supply and Fixing in repairs 300 mm long Aluminium alloy, anodised, sliding door bolts with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed Complete all as specified and directed.

Supply and Fixing in repairs 200 mm long Aluminium anodised, barrel tower bolts of extruded section all as specified.

Supply and Fixing in repairs aluminium anodised alloy handles, cast type, of size 150mm complete all as specified.

Supply and Fixing in repairs 150 mm (overall length of cover plate) Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed all as specified and directed.

Supply and Fixing in repairs 0.56 mm thick plain aluminium sheeting alloy 31000H4 in doors etc. complete all as directed by Engr-in-Charge.

Supply and Fixing 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exc.0.5 sqm in each pane including punching or drilling out old glazing pins / spring clips fixed etc including hacking out old broken glass from metal frames Complete all as specified and as directed by Engr-in-charge.

Supply and Fixing 4mm thick sheet glass, superior quality and glazing with oil putty in squares exc.0.5 sqm in each pane including punching or drilling out old glazing pins / spring clips fixed etc including hacking out old broken glass from metal frames Complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs 5.5 mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane including hacking out old broken glass of any thickness, size quality or description from steel frames etc Complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs 20mm dia decorative type Curtain rods for doors and windows including brackets complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs Vitreous china wash down water closet pedastal pattern white pattern (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, white cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

Supply and Fixing in repairs Vitreous china, Squatting pan, ‘Orissa’ pattern size 580 x 440 mm White with Integral foot rests and ‘P’ (or) ‘S’ Trap complete including connection to trap and flushing pipe, anti syphonage pipe etc but excluding flushing cistern and flush pipe including filling up with required concrete in sunken floors, complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs Vitreous china WHB white of size 550x400mm including CP waste coupling, 32mm dia PVC waste pipe, brackets and PVC connection etc. including 8mm dia GI rack bolt at rear side of WHB and making good to disturbed portion in Cement Mortar 1:6 with necessary grouting and finished to match the existing surface, complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs PVC valveless syphonic action type low level flushing cistern of 10 ltrs capacity with inlet, ball valve, float, flush pipe and handle including brackets etc, complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs 15 mm bore Stop valves, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union fixed of fixed all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs 20mm dia brass CP towel rail 60cm long including brackets complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs CP soap tray fixed to walls with rubber plugs complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs 15 mm bore bib taps, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot" or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs chromium plated grating with or without holes of size 100mm complete all as specified.

Supply and Fixing in repairs 32mm dia waste coupling of PTMT suitable for WHB (half or full threaded), (Minimum weight - 45gms), bore dia of discharge pipe 32 mm, complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs 40mm dia waste coupling of PTMT suitable for urinals, (Minimum weight -60 gms) bore dia of discharge pipe 40mm dia (half or full threaded), complete all as specified and as directed by Engr-in-charge.

Supply and Fixing in repairs PVC waste pipe 32 mm dia for wash hand basin / half stall urinal, complete all as specified and as directed by Engr-in-charge.

Supplying and laying of CPVC pipes SDR 11 with Plain CPVC SDR 11 fittings, size 16 mm outer dia, on walls/ceiling or laying in floors, including taking down old unservieable GI pipe complete all as specified and as directed by Engr-in-charge.

Supplying and laying of CPVC pipes SDR 11 with Plain CPVC SDR 11 fittings, size 20 mm outer dia, on walls/ceiling or laying in floors, including taking down old unservieable GI pipe complete all as specified and as directed by Engr-in-charge.

Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc.

Supply and Fixing 110mm PVC (SWR) pipes Single socketed in any length with rubber ring joints fixed to walls, laid in floors or in trenches with PVC clamps and saddles complete all as specified and as directed.

Supply and Fixing in repairs PVC bends suitable for 110mm dia PVC (SWR) pipes Complete all as specified ane directed by Engr-in-Charge.

Supply and Fixing 75mm PVC (SWR) pipes Single socketed in any length with rubber ring joints fixed to walls, laid in floors or in trenches with PVC clamps and saddles complete all as specified and as directed.

Supply and Fixing in repairs PVC bends suitable for 75mm dia PVC (SWR) pipes Complete all as specified ane directed by Engr-in-Charge.

Cleaning and removal of blockages from water closet, urinals, wash basins, sinks, kitchen & bathroom floor/nahani traps and gully traps etc including cleaning of drain pipes of any discription and size up to 1st manholes (rate including for removing off MH covers & placing the same in position after cleaning) by rodding/choke remover or by any other suitable means manually as in foul condition all as directed by Engr-in-charge.

Raking out cement joints/pointing to random rubble or polygonal rubble uncoursed or brought up to course including keyed pointing in CM 1:4 etc complete all as specified.

Material and Labour for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate for Plinth protection complete all as specified and directed.

Demolition of Brick work or Stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings dressed stonework and precast concrete articles Complete all as specified and as directed.

Material and Labour Pre-Cast Cement Concrete block masonry with solid blocks, in PCC 1:3:6, type C1, using 20mm graded stone aggregate exc. 10 cm in width and setting in CM (1:6) but except blocks etc. complete all as specified and as directed by Engr-in-charge.

Material and Labour Pre-Cast Cement Concrete block masonry with solid blocks, in PCC 1:3:6, type C1, using 20mm graded stone aggregate exc. 10 cm in width and setting in CM (1:6), complete all as specified and as directed by Engr-in-charge.

Material and Labour for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate as in Copings, Cills and the like including weathering, slightly rounded or chamfered angles and throating including use of formwork, Complete all as specified and as directed.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, etc. including raking out joints, hacking for key, scrubbing down with water, etc Complete and removing the rubbish off the premises to a distance n.exc.50m Complete all as specified and directed.

Material and labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in CM (1:6) finished even and fair without using extra cement etc complete all as specified and as directed by Engr-in-charge.

Material and labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in CM (1:4) finished even and fair without using extra cement etc complete all as specified and as directed by Engr-in-charge.

Material and labour for Rendering 5mm thick on fair faces of concrete surfaces of ceilings in CM (1:3) finished even and fair without using extra cement etc complete all as specified and as directed by Engr-in-charge.

Material and labour for making good broken edges of chajjas slabs, facing, fins etc in patches area not exc 1 sqm of each patch height up to 10 metre with 15mm thick cement plaster and sand mortar 1:3 or with PCC 1;2:4 type B0 with necessary form work finished the surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.

Disconnecting existing tanks capacity exc. 250 n.exc 500 litres, setting aside (lowering if required) for Cleaning and removing all scale, dirt etc from tanks and from mouth of circulationg pipes etc of over head water tank including washing with cleaning agent like washing powder or suitable saop powder etc and date of cleaning to be written with synthetic enamel paint letters on the side of the tank complete and refixing in position complete all as specified and directed.

Disconnecting existing tanks capacity exc. 500 n.exc 1000 litres, setting aside (lowering if required) for Cleaning and removing all scale, dirt etc from tanks and from mouth of circulationg pipes etc of over head water tank including washing with cleaning agent like washing powder or suitable saop powder etc and date of cleaning to be written with synthetic enamel paint letters on the side of the tank complete and refixing in position complete all as specified and directed.

Supply and Fixing 500 Litres capacity Rotational moulded polyethylene water storage tanks (cylindrical Each vertical with closed top) hoisted and fixed in position all as per specified and directed.

Supply and Fixing 1000 Litres capacity Rotational moulded polyethylene water storage tanks (cylindrical Each vertical with closed top) hoisted and fixed in position all as per specified and directed.

Supply and fixing 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm - 210gms/25mm-455gms/40mm-690gms) all as specified and as directed.

Supply and fixing 25mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm - 210gms/25mm-455gms/ 40mm-690gms) all as specified and as directed.

Supply and fixing Gun metal gate valve with iron wheel head ISI marked screwed both ends complete for 20 mm dia iron pipes.

Material and Labour for preparation of Old decorated surfaces of Ceilings including brooming down or steel wire brushing, scrapping down smokes soot, module, moss and efflorescence salt, oil and greasy spots etc and applying One coat of white wash Complete all as specified and directed.

Material and Labour for preparation of Old decorated surfaces of Walls including brooming down or steel wire brushing, scrapping down smokes soot, module, moss and efflorescence salt, oil and greasy spots etc and applying One coat of white wash Complete all as specified and directed.

Material and Labour for preparation of Old decorated surfaces of Walls including washing, rubbing down & stopping of distempered surfaces and applying One coat of oil bound distemper Complete all as specified and directed.

Material and Labour for preparation of Old decorated surfaces of Ceilings including washing, rubbing down & stopping of distempered surfaces and applying One coat of Oil bound distemper Complete all as specified and directed.

Material and Labour for preparation of Old decorated surfaces of Walls including brooming down or steel wire brushing, scrapping down smoke, soot, module, moss and efflorescence salt, oil and greasy spots etc and applying One coat of cement base paint Complete all as specified and directed.

Material and Labour for preparation of Old decorated plastered or unplastered surfaces of Walls and applying One coat of exterior emulsion paint (APEX) on Roof / Chajja / Facia / Walls / Path etc Complete all as specified and directed.

Material and labour for preparation of Old wood or wooden based surfaces or previously untreated surfaces, not otherwise described, over 10cm width or girth and applying One coat of Synthetic enamel paint Complete all as specified and directed.

Material and labour for preparation of Old wood or wooden based surfaces or previously untreated surfaces, not otherwise described, over 10cm width or girth and applying One coat of varnish Complete all as specified and directed.

Material and Labour for preperation of Old painted steel surfaces of any description over 10 cm width or girth and applying One coat of Synthetic enamel paint Complete all as specified and directed.

Material and Labour for preparation of Old painted surfaces of brick, stone, concrete, asbestos cement or plastered surfaces of any description, not otherwise, described over cm girth or width not otherwise described and applying One coat of Synthetic enamal paint Complete all as specified and directed.

Material and Labour for Writing Letters or figures (Block, roman, Italic or Indian) n.exc 30 cm high with and including synthetic enamel paint complete all as specified and as directed by the Engr-in-charge.

Material and Labour for preparation of newly plastered surfaces of Ceiling and applying three coats of white wash Complete all as specified and directed by Engr-in-Charge.

Material and Labour for preparation of new plastered surfaces of wall and applying Two coats of Oil bound distemper over a coat of alkali resistant priming Complete all as specified and as directed.

Material and Labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint any tint over a coat of alkaline resistant primer, Complete all as specified and directed by Engr-in-Charge.

Material & Labour for Walling of squared rubble, Bangalore type, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 including dressing face bed complete all as specified.

All as per Item No.84 above but except stones.

Material and Labour for Flush pointing to squared rubble masonry, coursed or uncoursed brought upto courses in CM 1:4 complete all as specified and as directed by Engr-in-Charge.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation etc for shafts, wells, manholes, columns, pier holes etc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in Hard / Dense soil all as specified and directed.

Material and labour Plain cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate as in foundations of filling and mass concrete all as specified and directed.

Material and Labour Pre-Cast Cement Concrete block masonry with solid blocks, in PCC 1:3:6, type C1, using 20mm graded stone aggregate exc. 10 cm in width and setting in CM (1:4), complete all as specified and as directed by Engr-in-charge.

Returning, filling in including spreading, levelling watering and well ramming in layers not exceeding 25cm thick in hard / dense soil complete all as directed by Engr-in-charge.

Removing excavated soil to a distance n.exc 5 Km and and depositing where directed at level not exceeding 1.50m above the starting point complete all as directed by Engr-in-charge.

Supply and fixing in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as directed by Engr-in-charge.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete etc all as specified and as directed.

Supply and fixing for Angle iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. and similar work Conforming to Fe 290 Gde E-165 complete all as specified and as directed by Engr-in-Charge.

Supply and fixing for Framed work as in door or gates for angle or other section with gusset plates, rails, braces etc hanging, etc hanging also fastening and fixing complete conforming to Fe-410W (Gde E-250 quality B) complete all as specified and as directed by Engr-in-Charge.

Supply only Chain link MS galvanised fencing any size or type complete all as specified and as directed by Engr-in-Charge

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, welding work required etc. including provision of winding wire Complete all as specified and directed.

Material and labour for running welding in repairs, thickness of metal to be welded exc 9mm but n.exc 20mm Complete all as specified and as directed

Material and Labour for preparation of new steel surfaces or previously untreated surfaces, not otherwise described, exceeding 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide zinc chrome primer Complete all as specified and as directed.

Material and labour for Welding in repairs exc. 2.5 cm but not exceeding 5CM in length, thickness of Metal to be welded exc. 9 mm but not exc. 20 mm Complete all as specified and as directed

SREE VARU ELECTRICALS

DESTINY BUILDERS