SPECIAL REPAIR TO FT BLOCK (BLDG NO 8) FOR ACCOMMODATING FOREIGN OFFRS AT OFFRS MESS AND SPL REPAIR TO CERTAIN PUMP HOUSE AND INSTALLATION BUILDINGS AT AEC TRG COLLEGE AND CENTRE PACHMARHI

Amount

BUILDING WORK

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris to out side MD land complete all as specified & directed.

M & L for vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, as in floor, laid over and including 15 mm thick screed bed in CM( 1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for non-skid coloured ceramic tiles 7 to 8 mm thick square / rectangular area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor laid over and including 15 mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cment to match with the shade of colour tiles complete all as specified and directed.

M & L for Glazed ceramic coloured tiles in vertical surface 350 x 250 x 7 mm/ 450 x 300 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM(1:4) complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed

Material and labour for machine cut kota stone slab 20-25 mm thick, laid and jointed with grey cement slurry mixed with pigment to match with shade of the slab including cutting, rubbing and polishing (Granite finish) over and including cement screed bed 20 mm thick in cement mortar (1:6) including rubbing and mirror polishing, complete all as specified and directed.

Material and labour for machine cut kota stone slab 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, rubbing and polishing (Granite finish) but as in skirting over and including 10mm thick plaster in cement mortar (1:4) on brick work or concrete surfaces, complete all as specified and directed.

Material and labour for polishing (Mirror polishing) to existing terrazzo / Kota tiles flooring / skirting complete all as specified and directed .

Dismantling of Plain or corrugated steel sheeting, Pre painted galvatume aluminium Zinc Coating any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling timber scantlings 40 sq.cm and over in section, in any positions as in framed work complete all as specified and directed.

-Ditto- all as per item 11 above but in fillets, rails, posts, rafters, purlins, etc under 40 sq.cm in section.

S&F Roof trusses (Framed), trussed, purlins, rafters, crane gantries,rails and fastenings and heavy bracket framing(Beam,tee,angle,channel or flat sections) including distance pieces,cleats etc conforming to Fe-410(Gde E-250), Quality 'A' complete all as specified and as directed.

S & F for Pre- painted galvalume aluminum zinc coating (AZ-150) GI based corrugated steel sheet 0.50 mm thick(TCT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified all as specified and directed.

S & F for Pre- painted galvalume aluminum zinc coating (AZ-150) GI based plain steel sheet 0.50 mm thick(TCT) of an colour having tensile strength of 550 Mpa as in roof covering/eaves board/cladding to wall, fixed with self tapping screws as specified all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed.

M&L for suspended false ceiling comprising of 5 to 6mm thick non asbestos fibre cement building boards fixed or laid/inserted to GI frame work with screws over Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 2 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

Dismantling of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed.

M&L for brick work with sub class 'B' fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. .

M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete complete all as specified and directed. Note : Liquid WPC will be measured and paid separately as "supply only".

M & L for rendering 10 mm thick on fair faces of brick or concrete surfaces in cement mortar(1:6), finished even and smooth (without using extra cement) complete all as specified and directed.

Supply only liquid water proofing compound , ISI marked, complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings including tiles not exc 15cm thick complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6), type C-2 using 40mm graded stone aggregate as in plinth protection, surface finished even & smooth without using extra cement, with and including joint filling (Size 30mm deep x 10mm wide) with sealing compound grade-A at 3m interval and corner complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sqm each with shutter (without taking off shutter from the frame) and removing complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but not exceeding 4 sqm each but with shutter (without taking off shutter from the frame) and removing to store complete all as specified and directed .

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site complete all as specified and directed.

Cutting holes in brick walls exc 1/2 brick but n exc full brick built in cement mortar for inserting hold fasts, cutting and preparation of brick wall for insertion of doors, windows & ventilator and making good the dismantled portion in cement mortar (1:3) etc complete all as specified and directed.

S&F pressed steel frame size (125 x 60 mm) for doors with one or more rebates including necessary fixing lugs, hold fast hinges, lock strike plate, etc complete all as specified and directed.

Supply and fixing factory made flush shutters 40 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, ISI marked complete all as specified and directed.

M&L for factory made second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified & directed. Notes:- (i) glazing will be measured and paid for separately. (ii) Butt hinge will be measured and paid for separately .

M&L Aluminium powder coated (powder coated of requried colour)having minimum thickness of powder coating 50 micron, three track sliding windows frame top & sides of size 92x31.75x1.50 mm (section No 20831), bottom size 92x31.75x1.50mm (section No 20832) and shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm ( section No 20737)" with including and fixing rubber gasket, beading and locking arrangement including making good the disturbed portion complete including & fixing stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and including and fixing 5mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting ,cill and making good the disturbed portion complete all as specified and as directed.

S&F aluminium powder coated( minimum thickness of powder coating 50 micron) ventilator louvers type frame top and bottom of size 31x42x1.60mm(sec no-20558) rectaular tube of size 40x20x2 mm (sec no-14019 and middle verticalof size 42x46.20x1.60mm sec(20560) and clip for fixing wiremesh and glass of size 19x17.30x0.90mm (sec no-19360)thick including and fixing stainless steel wire cloth 0.36mm niminal dia of wire and 1.40mm average width of aperature and fixed with stainless steel wire staples and supply and fixing 5mm thick louvers with blades of 100 mm heavy duty with neccessary rubber beading ,gasket etcincluding necessary plaster, painting ,cill and making good the disturbed portion complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified.

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F Stainless steel wire cloth, 0.63 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

S & F 100 mm long extruded mild steel anodised Butt hinges with galvanized mild steel complete all as specified and directed.

Supply & fixing aluminium barrel tower bolt of 150 mm long stove enamelled black with bright bolt complete all as specified and directed .

Supply & fixing aluminium barrel tower bolt of 200 mm long stove enamelled black with bright bolt complete all as specified and directed .

S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F 250 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Supply & fixing Aluminium alloy pressed handle oval type stove enamelled black of 150 mm long fixed with screw to shutter complete all as specified and directed.

Supply & fixing Aluminium alloy pressed handle oval type stove enamelled black of 125mm long fixed with screw to shutter complete all as specified and directed.

Supply & fixing Aluminium alloy pressed handle oval type stove enamelled black of 100 mm long fixed with screw to shutter complete all as specified and directed.

Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of new/old plastered surfaces of wall & concrete surface and applying and including avg 1 mm thick wall care putty including preparation complete all as specified and directed.

M&L for applying two coats of oil bound distemper on new surface of wall or concrete surface over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of oil bound distemper on old surface of wall or concrete surface on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L preparation of new/old plastered or unplastered surfaces of wall and applying two coats of weather proof antifungal paint exterior emulsion Apex paint over & including one coat of primer complete all as specified and directed.

S&F in repair bib tap 15 mm bore fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed.

S&F in repair 15mm dia pillar taps cast copper alloy chromium plated ,screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe (bore of pipe 15mm)

S&F in repair CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete.

S&F in repair for 15 mm bore fancy type Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed

S&F, in repair, Brass chromium plated shower rose 125mm size Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union

Supply & fix in repairs, stainless steel soap dish disc wall mounted (oval) type, glossy finish including all necessary screws of same finish of pattern complete all as specified and directed.

S&F, in repair, vitreous china wash basin, white flat back, size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, incl 32 mm dia brass CP waste fittings (coupling) including 32 mm waste pipe complete all as specified and directed.

S&F, in repair, vitreous china wash down water closet pan (Pedestal pattern)white including fixing bolt and plastic water closet seat white closed pattern with flat bottom cover with MS chromium plated hinging devices to matching colour complete all as specified and directed.

S&F, in repair, 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle including bracket and flush pipe of low level of 32mm dia fixed to wall complete all as specified and directed.

S & F, in repair, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nut, of length 450mm complete all as specified and directed.

Taking down AC/PVC eaves gutter and rain water pipes of any size and pattern including all fittings pipes with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

M&L PVC(SWR) bend of 110 mm dia of any radius etc complete all as specified and directed.

M&L PVC(SWR) Tee of 110 mm dia etc complete all as specified and directed

S&F PVC (SWR) bends any radius provided with access door of 75 mm dia complete all as specified and directed.

S&F PVC (SWR) multi floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete all as specified and directed.

S&F in repair C.P. grating 100mm square/round with or without hole complete all as specified and directed.

S&F in repairs stainless steel toilet paper holder fixed with wooden gutties and screws to wall surfaces.

S&F in repairs mild steel, chromium plated curtain rod 20mm dia with holder/bracket, stops, rollers etc.

Dismantling PVC water tanks exc 500 ltrs but not 1000 ltrs including taking down of float valve and removing from site complete.

S&F 1000 Ltrs capacity PVC Rotational Moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layer, ISI Marked, hoisted and fixed in position complete all as specified and directed.

S&F, in repair, ball valve / float ball high pressure of PTMT 20mm with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed minimume weight 210 gm etc complete all as specified and directed.

S&F in repair 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking up or down steel tubing and connections with all fittings for 15 mm bore GI tubing complete all as specified and directed..

Taking up or down steel tubing and connections with all fittings for 20 mm bore GI tubing complete all as specified and directed..

Supply and fixing steel water tubing of 15 mm bore, medium grade galvanized with provision of all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed.

Supply and fixing steel water tubing of 20 mm bore, medium grade galvanized with provision of all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed .

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any, complete all as specified and directed.

S&F expanded metal, cut to length,bent to shape required and tying with and ncluding annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to steel members

M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified and directed.

-Ditto- all as per item 88 above but one coat of synthetic enamel paint on old steel surfaces of any description complete all as specified and directed.

M & L for post construction anti-termite treatment of soil along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

M & L for post construction anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

M& L for 1.25 mm thick of 150 mm dia Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges complete all as specified and directed.

S&F for Drop ends (for spigot or socket ends) or nozzles of dia 150 mm complete all as specified and directed.

S&F for Stop ends (for spigot or socket ends) of dia 150 mm complete all as specified and directed.

M&L for complete removal of existing treatment on wall surface complete all as speceified and directed.

M&L for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over & including 1 mm thick of cement base putty complete all as specified and directed.

M&L preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for IInd class (Indian Sal, Bijasal, Hollock or Benteak) hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified & directed.

S & F 30 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides, supplied and fitted to chowkats, complete all as specified and directed.

S&F, in repair, Harrison rails, anodised aluminium alloy , chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ complete all as specified & directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete including removal of debris to out side MD land complete all as specified & directed.

M&L for precast reinforced cement concrete(1:2:4), type B1 using 20mm graded stone aggregate for cover slabs of manholes, cover slab set in CM 1:4 side portion only with plain surfaces including necessary form work complete all as specified and as directed. ( Note : Reinforcement to be measured and paid separately)

M&L for PCC(1:2:4) type B0 (Using 12.50 mm graded stone aggregate) as in roof padding/kerbs/sunken slab etc complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L 10 mm thick rendering on roof surfaces/concrete surface in CM(1:4) complete all as specified and directed.

M&L Water proofing treatment on "Non approachable / non accessible roof" surface (Horizontal, sloped & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete (i) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm (ii) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm including cleaning surfaces. (iii) Laying /unrolled over the bitumen coated surface, APP modified polymeric membrane weighing 3kg/sqm(minimum) and minimum 3mm thick reinforced with polyester non woven fabric (wt. not less than 150 gm/sqm) laid on primed surface by forced application complete all as specified with 100 mm over laps which shall be sealed by flame as per manufacturer's instruction. (iv) Applying two coats of bituminous aluminium paint@200gm / sqm in two coats including preparation of surface complete

S&F for collapsible steel gate, top hung consisting of channel pickets, pivoted flat bar, top and bottom runners, brass handles etc as specified , erected in position and securing runner with holdfasts and brackets complete

S& F for Steel rolling shutters of 1.25 mm thick, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, gear operated type with bevel gear box and crank handle complete all as specified and directed

Internal Electrification

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. complete all as specified and directed at site.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully Metal clad Box/SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc complete all as specified and directed.

Taking down carefully copper/aluminium sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down existing geyser of any capacity after disconnecting all necessary electrical and water supply connections and deposit to MES store yard of AGE( I) Pachmarhi complete all as specified and as directed.

Taking down ceiling fan /exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE(I) Pachmarhi complete all as specified and as directed.

Taking down existing single phase electric energy meter of any capacity after disconnecting all necessary electrical connections and refixing the same in its original location including necessary electrical connections complete all specified and directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting chases and making good the disturbed surface to match with existing finish complete all as specified and directed for the followings :-

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

One bell point controlled by one, bell switch 5 Amps

Description all as per item No. 117 here in before but using 2.5 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH cable of multistranded PVC insulated unsheathed as earth continuity conductor along with wiring and connecting to the common eath dolly.

Description all as per item No 117 here in before but using 4.0 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sq mm copper conductor FRLSH cable of multistranded PVC insulated unsheathed as earth continuity conductor along with wiring and connecting to the common eath dolly.

S & F for ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and directed.

S & F for modular switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified and directed.

S & F for modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.

S & F for modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F for modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F for socket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and directed at site.

S & F for socket outlet 2-in-1, 5 pin, 5/15 amp, 230 Volts complete all as specified and directed.

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S & F for Bell push modular 6 Amps single module complete all as specified and directed.

S & F for lamp holder, PVC / Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed.

S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

S & F for modular type TV Socket out let complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories, ISI marked, heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit

S & F for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good the distrubed surface to match with existing specification complete all as specified and as directed.

S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good the distrubed surface to match with existing specification complete all as specified and as directed.

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing specification complete all as specified and as directed.

S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for MCB Single pole rated capacity 6 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed complete.

S & F for water Heater storage type (Geyser) vertical/ Horizental type as per site requirement with inner container of capacity 25 ltrs, electrically operated, AC 230 Volts,BEE 5 star rated, ISI marked including 04 Nos of hold fastener nuts, required of suitable size fixed in brick wall, PVC connection pipe, hot & cold complete all as specied and directed

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

Labour only for refixing the celing fan obtained from item No 115 above with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including Servicing / over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spray gun including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed.

S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL Retro fit lamp,in B-22 cap complete all as specified and directed

S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 10 watts complete all as specified and as directed.

S & F for LED tube light fitting 2 feet x 10 watts mirror type with high out put diffuser, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting complete all as specified and as directed.

S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S & F for Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bent to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bent to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge.

S & F for energy efficient exhaust fan of 300 mm sweep made of metal body complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note : Cost of suitable opening in the wall for fixing exhaust fan is deemed to be included in overall rate quoted).

S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 20 mm dia for LAN, telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4 mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in Electrical plate no 3 of SSR part I(2009) including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Schedule of credit amount of Rs 2,68,166.50 to be deducted during AOC

M/S Shanti Enterprises (BID ID -3401847)

CREATIVE CONSTRUCTION (BID ID -3401407)

MISHON TRADING CORPORATION (BID ID -3398433)

MODI CORPORATION (BID ID -3409645)

Dev Enterprises (BID ID -3408859)

NIHAL ENTERPRISES (BID ID -3408773)

GHASI RAM SAHU (BID ID -3401537)