WORKS

Amount

Part-A Supply

Design of 220 kV DC monopoles suitable for ACSR Zebra conductor with extension nuts, bolts, washers & ladders etc. and its foundations (design of monopoles & its respective foundations duly approved from any of the Govt. approved test lab i.e. CPRI/IIT (Mumbai, Delhi, Chennai, Roorkee, Khadagpur, Kanpur).

DC PA (0-2 degree) with Bottom X-arm at 21 mtr.

DC PD (30-60 degree) with Bottom X-arm at 21 mtr.

DC PC (15-30 degree) with Bottom X-arm at 36 mtr.

Fabrication, galvanizing, inspection & supply of 220 kV DC monopoles suitable for ACSR Zebra conductor with extension nuts, bolts, washer & ladders etc. as per design at Sl.No.1.11,1.12&1.13.

DC PA (0-2 degree) with Bottom X-arm at 21 mtr.

DC PD (30-60 degree) with Bottom X-arm at 21 mtr.

DC PC (15-30 degree) with Bottom X-arm at 36 mtr.

Supply of Narrow Base Towers- Fabrication, galvanising, inspection and supply of 220 kV DC narrow base towers including nut bolts & washers, stubs, extensions, stub setting template etc. as per UPPTCL duly adopted designs, drawings & BOM.

HT Steel (2 nos. D+25 & 1 No. D+9 type towers)

MS Steel(2 nos. D+25 & 1 No. D+9 type towers)

Nuts & Bolts

Supply of Tower Accessories

Number plate

Danger plate

Phase plate in set of Red Blue & Yellow

Pipe type earthing material

Supply of Hardware suitable for ACSR Zebra

Single suspension fitting

Single tension fitting

Double tension fitting

SS Pilot fitting

Supply of Conductor Accessories suitable for ACSR Zebra

Vibration dampers

Mid Span compression Joint

Repair sleeves

Preformed Armour Rod

Composite Silicon Rubber insulator string of 70KN suitable for suspension fitting

Composite Silicon Rubber insulator string of 160KN suitable for tension fitting

Supply of OPGW wire including accessories and testing of equipments

24 fibre OPGW

Supply of hardware set for 24 fibre OPGW

Joint box (24 Fibre)

FODP 48 F

Fibre Optic approach Cable for 24 F OPGW

Supply of hardware set for 24 fibre OPGW Optic approach Cable

Part-B Work

Survey including preparation of final tower schedule of material marking of location (Route length) and super impose the GPS coordinates of locations on elevated road plan to get the clearance from other objects etc. before start the work.

Check survey & final peg marking (Route length)

Soil investigation

Monopole Work

Cost of excavation of 220 KV DC MONOPOLE foundation pits including all earth work, back filling and leveling etc.

Cost of concreting for all types 220 KV DC MONOPOLE foundation including cost of cement, dewatering, shorting and shuttering, forming & curing but excluding cost of reinforcement bars with 1:1.5:3 mix concrete.

Cost of pilling upto 10 mtr depth as per requirement of set cost also includes laying of reinforcement & bentronite bags but excludes the cost of reinforcement & concrete. One Job defined as the work at one location.

Cost for setting & alignment of bolts along with sacrificial & normal template for 220 kV DC monopoles.

Installation of steel reinforcement bars in RCC foundation including cost of steel reinforcement bars with cutting, bending, placing, binding etc.

Erection of 220 kV Monopoles and their extensions accessories wherever required including all work above ground level excluding hoisting of insulators and hardware.

DC PA (0-2 degree) with Bottom X-arm at 21 mtr.

DC PD (30-60 degree) with Bottom X-arm at 21 mtr.

DC PC (15-30 degree) with Bottom X-arm at 36 mtr.

Tack welding of all the bolts at Base Plate of Monopole.

Ground work including earth material for pipe type earthing.

Narrow Base Tower Erection work

Excavation of foundation including of material forming, dewatering, shoring, shuttering etc.

Setting of stub for Narrow base D+25 towers

Setting of stub for Narrow base D+9 towers

Concreting of PCC foundation 1:3:6 ratio of cement coarse sand and stone ballast including cost of arrangement of form box, shoring, shuttering & back filling curing including the cost of cement, coarse sand & stone ballast etc.

Concreting of foundation RCC 1:2:4 ratio of cement coarse sand and stone ballast including cost of arrangement of form box, shoring, shuttering & back filling curing including the cost of cement, coarse sand & stone ballast etc.

Reinforcement work of foundation including cutting, bending, welding as per specification & drawing complete including cost of material, labour, tools & plants & wastage of steel etc.

Erection of super structure including of all work above ground level excluding hoisting of insulators but including fitting of danger plate, phase plate, number plate and punching of bolts for narrow base tower as given above.

Laying, tensioning, stringing, clamping, jointing etc complete with ACSR Zebra conductor double circuit including hoisting of insulators fitting of all 12 phases with necessary hardware & accessories etc.

Laying, tensioning, stringing, clamping, jointing etc. complete with optical fiber ground wire including hoisting of all necessary hardware & accessories for OPGW.

Tack welding of tower up to 1st section

Providing barricades for avoiding any accident during the period of excavation to backfilling of soil & during erection.

Dismantling of dividers/ pedestral area, road etc. at locations for the work & making good after completion of work.

AARVANSS BUILDWELL AND INFRACON LLP

KUMAR TRADING COMPANY

Shaurya Shakti Enterprises

VITS Total Power Solutions Pvt. Ltd.