supply and fixing heat shrinaklbe cable termination n straight jointing kits and painting of poles/structures of JRD rly siding of AKKOCP, BnK Area.

Amount

supply and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminum conductor cable of 11kv grade as required-120 sq mm

supply and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminum conductor cable of 11kv grade as required-70 sq mm

Supply and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core XLPE aluminum conductor cable of 11 kv grade 70 sq mm

Laying of one number pvc insulated and pvc sheathed /XLPE power cable of 11 kv grade of following size direct in ground including excavation sand cushioning protective covering and refilling the trench etc ; as required upto 120qmm

Wiring for light/ power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 100 Amp TP&N.

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 200 Amp TP&N.

Supply and laying of 3 core submersible copper cable 6 sq. mm size of flexible flat cable ISI mark

Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works 35 tubular and rail pole and other structures

Painting with aluminium paint of approved brand and manufacture to give an even shade

Erection of metallic pole (above 10 m and upto 12 m) in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required. (1 span x 20 m x 3 wire) x 0.394 kg/m= 246.6 kg

Supply and erection of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required

Transporting of Poles from stock to work site

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required

Total impact of GST for the purpose of CTC

RAJA ELECTRICAL WORKS

M/s Maa Laxmi Enterprises