Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹91.2 LAccepted-Finance | L1 | Accepted-Finance Responsive | |
| 2 | L2₹99.7 L+₹8.5 L (9.28%)Accepted-Finance C 9 53 IIND FLOOR SECTOR 08 ROHINI DELHI 110085 | DELHI | NORTH WEST DELHI | DELHI | 110085 | L2 | Accepted-Finance Responsive | |
| 3 | L3₹1.1 Cr+₹22.0 L (24.1%)Accepted-Finance | L3 | Accepted-Finance Responsive | |
| 4 | L4₹1.2 Cr+₹24.7 L (27.0%)Accepted-Finance POCKET A 2 310 SECTOR 08 ROHINI NEW DELHI 110085 | NEW DELHI | NORTH WEST DELHI | DELHI | 110085 | L4 | Accepted-Finance Responsive |
Tender Value
₹91.7 L
EMD Value
₹1.6 L
Closing Date
27 Jul 2022, 1:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Chief Executive Officer
Delhi Cantonment Board, Delhi Cantt.
Construction of Residential Accommodation of DEO, Delhi Circle
2022_DGDE_536174_1
DCB/8/C-2/2022-23
Open Tender
Civil Works
Item Rate
365 days
Delhi Cantt.
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,000
Chief Executive Officer, Delhi Cantonment Board
₹1.6 L
1 Aug 2022
6 Jul 2022
28 Jul 2022
6 Jul 2022
27 Jul 2022
6 Jul 2022
6 Jul 2022 - 27 Jul 2022
Amount
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas upto 1.5 m depth including disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed.
All kinds of soil.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas exceeding 1.5 m depth upto 3 m depth, disposed earth to be levelled and neatly dressed.
All kinds of soil.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil.
Returning filling from available excavated earth, excluding rock/boulder in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth and consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m.
Supplying and filling in plinth with Jamuna sand under floors including, watering, ramming consolidating and dressing complete.
M/L, A.T.T. along external wall where the apron is not provided using chemical emulsion @ 7.5 litres/ Sqmt of the verticle surface of the substructure along wall & backfilling etc complete with chlorphriphos/ lindane E.C. 20% with 1% concentration
M/L, A.T.T. along the external wall below concrete or masonary apron using chlorphriphos/ lindane E.C. 20% with 1% concentrators @ 2.25 litres per linear meter including drilling and plugging holes etc.
M/L, A.T.T. soil under floors foundation, plinth protection and like using chemical emulsion with chlorphyriphos/ lindane E.C. 20% with 1% concentration @ 5 ltrs/ Sqmt for creating continous chemical barrier under and around the columns, pits, walls, trenches, plinth protection etc complete
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, shelves, counter slabs, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, drains, channels etc. upto floor five level, excluding the cost of centring, shuttering and finishing:
1:2:4 (1 Cement : 2 coarse sand : 4 graded stone nominal size) aggregate 20 mm
Making plinth protection 75 mm thick of cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately).
All works upto plinth level
All works above plinth level upto floor V level
Centring and shuttering including strutting, propping etc. and removal of form for :
Foundations, footings, bases of columns etc. for mass concrete.
Suspended floors, roofs, landings, balconies, stairs and access platform.
Lintels, beams, plinth beams, grinders, bressumers and cantilevers.
Columns, Pillars, Piers, Abutments, Posts and Struts
Extra for double height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for additional height upto 3.5 metres or part thereof (Plan area to be measured) [Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)]
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Up to plinth level.
Thermo-Mechanically Treated bars.
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Above plinth level.
Thermo-Mechanically Treated bars.
Brick work with F.P.S. bricks of class designation 75 in foundation and plinth manholes, Parapet walls, retaining wall & like
Cement mortar 1:4 (1 cement: 4 coarse sand)
Material and Labour brickwork for constructing square/ rectangle manholes using sewer bricks confirming to IS 4885 built in cement mortar 1 : 4 (1 cement : 4coarse sand), exceeding 6.0 Mtrs. mean radius
Half brick masonry with bricks of class designation 75 in superstructure above plinth level upto floor V level
Cement mortar 1:4 (1 cement: 4 coarse sand)
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry (with F.P.S. bricks)
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Providing and laying autoclaved aerated cement blocks masonry in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ) The rate includes providing and placing in position 2 Nos. 8 mm dia M.S. bars at every third course of masonry work.
Providing and fixing 35 mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
100 mm ISI marked Stainless Steel butt hinges with necessary screws
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 lever and a pair of lever hanles of approved quality with necessary screws etc complete.:
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:
Providing and fixing bright finished brass hanging type floor door stopper with ncessary screws etc complete.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fasteners shall be paid separately)
Second class teak wood
Supplying pre-fabricated/ factory made modular kitchen units below & above main kitchen platform and unit having approx. 610 mm depth as per design and/or as directed by Engineer-in-charge. The frame work or carcass of the cabinets including drawer fascia/ sides/ bottom, shelves etc shall be made out of 19 mm thick marine plywood (of make like Green ply/ Century Ply/ Kit ply or equivalent of grade of boiling water proof and moisture resistant) with laminate of inside of 0.6 mm and 1.0 mm laminate of glossy/ matt finish panel shutters shall be made out of 19 mm thick HDF with glossy finish (with 10 year’s warranty) of make like Spacewood/ INOPAN/ PARACASA or equivalent of grade of boiling water proof and moisture resistant. Each shutter shall be fixed to the framework using two numbers of soft close auto hinges of make Hettich, KAFF or approved equivalent make and Handle G profile for all drawers doors of reputed approved make. Each drawer, the fascia shall be made out of 19 mm thick HDF (with 10 year’s warranty) of make like Spacewood/INDOPAN/ PARACASA or equivalent of grade of boiling water proof and moisture resistant) with laminate on both sides and baskets of stainless steel 304 grade as per approved design with all accessories. It shall be mounted on approve quality, high precision soft closed telescopic channels of make Kaff, Hettich, Hafele or approved equivalent of 45 kg capacity to be designed as per drawer size and to meet the weight requirement with minimum length of 20 inch to ensure smooth movements of drawer with/ without content weights. The telescopic channel rails may be provided as per specifications. In each kitchen, there should be a minimum of 2 nos of plain baskets (size – 19x20x4), 2 nos of plain baskets (size -19x20x6), 2 nos of plain baskets (size-19x20x8), 1 no. of cutlery basket (size-19x20x4), 1 no of basket for cup & saucer (size – 19x20x4), 1 no of basket for thali (size – 19x20x4), 1 no of basket for Bottle pullout (6”size), 1 no. of detergent holder, 1 no. of Dustbin Holder
Supplying pre-fabricated/ factory made overhead kitchen wall units above main kitchen platform having box type overhead units upto 500 mm depth design and/ or as directed by the Engineer-in-charge. The frame work or carcass of the cabinets including fascia/ sides/ bottom, shelves etc shall be made out of 19 mm thick marine plywood (of make like Green ply/ Century Ply/ Kit ply or equivalent of grade of boiling water proof and moisture resistant) with laminate of inside of 0.6 mm and 1.0 mm laminate of glossy finish Panel Doors shall be made out of 19 mm thick HDF with glossy finish (with 10 years warranty) of make like Spacewod/ INOPAN/ PARACASA or equivalent of grade of boiling water proof and moisture resistant. Panel Doors also having provision of fixing of 6 mm transparent glass with provision of inside light to controlled with the opening of Doors. Each shutter shall be fixed to the framework using two numbers of soft close auto hinges of make Hettich, KAFF or approved equivalent make and Handle G profile (Approx 7 feet per kitchen) of reputed approved make.
Supply and installation of Kitchen Chimney (suction - 1000 m3/ hr) of make - Fabur/ KAFF/ Whirldpool/ Glen or approved equivalent
Wardorbes 600 mm deep with two drawers, hanger rod, shelves as per design loft with separate doors
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
Providing and fixing MS tube/ pipe hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
Providing and fixing aluminium work for doors, windows, ventilators and partitions [using powder coated aluminium (minimum thickness of powder coating 50 micron)] with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
for fixed portions
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required including all fittings like handles, tower bolts, casement stays etc. complete (excluding glass panes/ wiremesh).
Providing & fixing glass panes/ wire mess and securing them in aluminium doors, windows, ventilators shutters etc complete
5.5 mm thick float glass panes
Stainless Steel wire mesh with average width of aperture 1.4 mm in both direction with wire of 0.50 mm nominal dia
4.00 mm thick translucent glass (Pin- head)
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5(1 cement : 5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 600x600 mm tiles; 400x400 mm tiles
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. 600x600 mm
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)
25 mm thick
Providing gola 75x75 mm on roofs in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design:
In 75x75mm deep chase
Making khurras 45 x 45cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20mm nominal size) over PVC sheet 1m x 1m x 400 micron, finished with 12mm cement plaster 1:3 (1 cement: 3 coarse sand) and coat of neat cement, rounding the edges and making and finishing the outlet complete.
Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes
110 mm diameter
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
Coupler 110 mm
Door, bend 110 mm
Bend 87.5 110 mm
Providing and fixing M.S. holder bat clamps of approved design for rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. for 110 mm dia rainwater pipe :
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing and fixing machine cut, mirror/ eggshell polished , stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge.
20 mm thick Kota (area of each slab exceeding 0.15 Sqmt, for risers and treads), single stone slabs shall be used for risers and treads without joints.
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
Area over 0.50 sqm. For window cil. Raj Nagar White.
Granite slab over kitchen counter
Extra for fixing granite stone in facia and drops of width upto 150 mm with expoxy risen based adesive including cleaning etc complete
Providing half round edge moulding to marble/ granite/ kota stone/ katni/ udaipur green stone provided in any position and thickness upto 25 mm
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of any size and diameter, double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head with polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.
Cement Plaster 15 mm thick of mix, on any surface of bricks, AAC blocks, concerete surfaces etc.
1 : 1 : 3 (1 Cement : 1 Coarse Sand : 3 Fine Sand)
10 mm thick cement plaster on ceiling and like
1 : 1 : 2 (1 Cement : 1 Coarse Sand : 2 Fine Sand)
M/L 6 mm thick POP surfaces on ceiling with POP mouldings on borders of ceiling & POP ornamental design around fan boxes etc as per design or as directed by Engineer-in-Charge.
Interior finishing, distempering with 1st quality acrylic distemper (readymix) of approved manufactuerer, of required shade and colour complete as per manufacturer specifications, including applying of cement putty, priming coat and preparation of surface as per manufacturer specifications on ceiling & wall surfaces
two or more coats on new plastered wall surfaces
two or more coats on new plastered ceiling surfaces
Exterior finishing, finishing walls with acrylic smooth exterior paint of required shade
Exterior finish New work (two or more coats applied @ 1.67 ltrs/ 10 sqmt over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqmt and preparation of surfaces)
Painting steel work with deluxe multi-surface paint to give an even shade. Two or more coat applied @ 0.90 litrs/ 10 sqmt over an undercoat of primer applied @ 0.80 litr/ 10 sqmt of approved brand and manufacturer
Polishing in high gloss/ matt finish melamine clear polish on wood work in required color/ wooden shade texture with following process in the sequence as detailed below:- 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/ grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done and this surface is further allowed to dry for 12 hrs. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time)
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge for external work.
15 mm nominal outer dia Pipes
20 mm nominal outer dia Pipes
25 mm nominal outer dia Pipes
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
25 mm nominal bore
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
15 mm nominal bore
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
15 mm nominal bore
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
15 mm nominal bore lever handled operated
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
15 mm nominal bore.
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
150 mm dia
Providing and fixing gun metal gate valve with C.I. wheel of approved qualioty ( screwed end)
20 mm dia Nominal bore
25 mm dia Nominal bore
Providing & fixing floor mounted, white vitreous china single piece, double traps symphonic water closet of approved brand/ make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.
Providing and fixing of Health Faucet complete with holder, pipe and fittings C.P. Brass
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer.
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia.
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
Providing and fixing toilet paper holder : C.P. Brass.
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board. 510x1040 mm bowl depth 250 mm.
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia Flexi Pipe
Providing and fixing of Towel Bar: C.P. Brass
Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) all-round RCC pipes including bed concrete as per standard design :
250 mm diameter NP-2 Class RCC pipe
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
100 x 100 mm size P type, with sewer bricks confirming to IS 4885
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
250 mm dia. R.C.C. pipe
Supplying of SFRC Manhole covers & frames conforming to IS – 12592 (Part I) using M-35 concrete having clear opening of 560 mm dia as per details below:
Medium Duty: . Over all Total Size in height mm mm Frame Detials 770 110 Cover Details 670 60
Supplying & Fixing SFRC gratings confirming to IS 12592 (Part I) 70 mm thick square or rectangular in shape as directed by Engineer-in-charge using M-35 concrete.
Providing & fixing to horizontal & vertical surfaces 24 gadge chicken mesh wire between junctions of columns/ beams, walls and conduit pipes wherever required, chicken wire mesh should be fixed with U nails 150 mm centre to centre before plastering the junction. The plastering of walls and beams/ columns in one vertical plane should be carried out in one go, all inclusive complete
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors
100 mm inlet and 100 mm outlet, PVC
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all works upto plinth level
1:4:8 (1 Cement : 4 Coarse Sand : 8 graded stone aggregates 20 mm nominal size)
Providing & laying in position Ready Mix Cement concrete M-10, grade, machine batched, machine mixed, Design Mix Concrete (excluding the cost of centering and shuttering,) placing in position, mechanical vibrated and finished including addition of admixtures in recommended portions (as per IS-9103) to accelerate/retard setting of concrete to improve workability without tampering strength and durability laid to required slope and camber in panels as directed in accordance with IS 456-2000,transported to the site of work from approved RMC plant .
Providing & laying in position Ready Mix Cement concrete M-25, grade, machine batched, machine mixed, Design Mix Concrete (excluding the cost of centering and shuttering,) placing in position, mechanical vibrated and finished including addition of admixtures in recommended portions (as per IS-9103) to accelerate/retard setting of concrete to improve workability without tampering strength and durability laid to required slope and camber in panels as directed in accordance with IS 456-2000,transported to the site of work from approved RMC plant .
Providing and placing, machine cutting grooves, 10 mm wide and 60 mm deep in concrete surfaces for construction/ contraction joints and longitudinal joints, providing joint sealant compound of cold polysulphide in the groove after widening the groove to required width, cleaning the groove with air compressor, insertion of debonding strip, as per MORTH specifications Clause 602
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. 40 mm thick.
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete
2nd class teak wood. 50x12 mm
Providing & fixing 35 mm wire gauge shutters using galvanized SS wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws of second class teak wood.
Supplying and mixing of liquid Water proofing compound for cement concrete, cement plaster conforming to IS specifications.
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 12.5 mm nominal size
Providing & fixing 25 mm GI pipes complete with GI fittings and clamps, i/c cutting and making good the walls etc
Point wiring in PVC conduit, with modular type switch :- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. GROUP B
Power plug wiring in PVC conduit (2 x 4 Sq.Mm.) :- Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class pvc conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
Circuit / Sub main wiring in PVC conduit :- Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required.
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.
2 X 4 sq. mm + 1 X 4 sq. mm earth wire.
2 X 6 sq. mm + 1 X 6 sq. mm earth wire.
Supplying & fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required
4 module
6 module
8 module
12 module
Supplying & fixing following modular swtich/ socket on the existing modular plate & switch box including connection but excluding modular plate etc as required
5/6 A Switch
2 way 5/6 A Switch
15/16 A Switch
3 Pin 5/6 A Socket outlet
6 pin 15/16 A socket outlet
Telephone socket outlet
Bell push
Supplying & fixing at ceiling fan 1200 mm sweep complete with all accessories & electronic regulator as specified and directed by Engineer-in-charge
Supplying & fixing of exhaust fan 450 mm sweep complete with all accessories including connection as specified & directed by Engineer-in-charge
S/F recess LED panel square, 24 watt, 200x200 mm size rates voltage 230, IP 20 etc as specified & directed by Engineer-in-charge
S/F light plug point modular type accessories :- Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
S/F power plug point modular type accessories :- Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
S/F modular type blanking plate :- Supply and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `C' series, miniature circuit breaker (MCB)suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
single pole
Double pole
Supplying & fixing single pole, blanking plate in the existing MCB DB complete etc. as required.
Supplying and fixing following rating, two pole, (one phase & neutral) 220 volts, residual current circuit breaker (RCCB), having a sensivity current upto 300 miliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required :
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
12 way , Double door
16 way , Double door
Supplying, fixing, connecting, testing and commissioning of following rating, ISI marked (IS 8828) 240 / 415 volts, 10 KA, Miniature Circuit Breaker (MCB) of single / double / three / four poles in the existing MCB DB or in existing MS enclosure complete in all respects.
63 Amp. FP MCB
Supply of Mounting rail with Master LED tube with all accessories as per standard item:
T8 T-LED 10W P3241 with Master LED Tube 10 W
Supply of ISI marked aluminium conductor XLPE insulated cable as per IS 7098, armoured, served, sheathed 1100 volts grade.
25 sqmm 4 core
Earthing complete with galvanised steel earth plate electrode 60x60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5m below normal ground level, connected to galvanized earth strip 25 x 3mm by means of both nuts check nuts and washer of galvanised iron or steel including concrete chamber of PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) PCC with fair finish internal surface of concrete chamber will be given 15 mm thick plaster in CM 1:4, funnel with wire guage of (0.68) 8 mess 80 mm thick RCC pit cover 320x 320 mm of RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) re-inforced with Jalli and including necessary charcoal dust and common salt all as shown electrical as per DSR (E&M) latest specifications and specified including provision of earth wire protected by 40mm dia medium grade pipe and watering pipe shall be 20mm dia medium grade including all excavation and earth work in any type of soil and connecting earthing to an earthing test point to main panel board and testing on completion all as specified & directed by Engineer-in-Charge. Note :- RCC pit cover shall be of pre cast RCC (1:2:4) type-B-1 80mm thick re-inforced with jalli weighing not less than 4 kgs/sqm in lieu of CI cover.
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
M/L supply and erecting of octagonal poles of 7.0metre height with 150 mm bottom Dia75 mm at top made out of 3mm thick MS sheet along with galvanized base plate of size 225x225x16 mm suitable to with stand Maximum. Wind speed 169 KM/Hr and suitable for mounting double or single arm bracket with street light fitting . The internal and external surfaces of the pole shall be hot dip galvanized to 65 microns DFT. The pole will have a weather proof comonflaged junction box at about 5 mm height with flush cover for cable termination block and earth stud with nuts washers etc including provision of drawing cable size upto 2 no, 2 core , 16 sqmm including supply 4 nos 20x750 mm long J type EN8 grade foundation bolts with nuts and washers and 63 amps terminal block suitable for 2 core 16 sqmm conductor cable termination and including providing GI pipe medium grade bracket of suitable length and size as directed for fixing of light fitting. The pole should be complete in all respect with all accessories required including painting of poles as directed by Engineer-in- Charge.
S/F , laying jointing of two run of PVC insulated cable 2.5. sq mm size with copper conductor and connecting from kiosk box to light fittings and main Board to fittings all as specified and directed by Engineer in-Charge.
Providing and casting in position M-30 grade reinforced cement concrete pole foundation of size 550 mm x550mm x1500mm including providing cutting , bending and placing in position reinforcement of 8 nos. cold twisted , vertical bars of 12 mm dia and reinforcement of cold twisted bars of 8 mm dia with 190 mm spacing and fixing of J bolts , terminal blocks MCB etc including providing and placing 63 mm internal dia. DWC pipe double wall corrugated with corrugation on outer face and plain surface on minor side, HDPE pipe of suitable bore of suitable length for cable inlet and exit as specified and directed by Engineer-in- Charge.
Supplying /installation/testing and commissioning feeder pillar outdoor, cubical type, weather proof totally enclosed suitable for 440 V , 3 phase,50 C/s electric supply fabricated out of angle, 40 mx40m x6mm and Ms plain sheet 2 mm thick complete with two coats of spray painting of enamel paint, with a prior coat of primer, comprising of the following: a) Aluminum bus bar TPN , 3 phase, 4 strips-100 Amp. 1set. b) Incoming MCB TPN 63 Amp -1 No. c) OutgoingMCB TPN 32Amps. – 1 No. d) MCB Single phase neutral (SPN) outgoing - 4 Nos. 32 Amps. e) 24 Hrs electronic Timer- 01 no. f) 40 Amp TP Air brake contactor -01 g) Heavy duty godown lock- 02 nos. h) Termination incoming /outgoing cable with suitable size of ferrules and compression gland. i) Hinged door open able on both side with heavy duty locking system-2 no. j) Canopy at Top. k) Legs of suitable length made out of 40 mmx40mmx6 mm angle iron including grouting the legs in 1:2:4 CC.
Boring hole horizontally under ground at required level with trenchless digging machine or manually suitable to pass 50 mm dia MS pipe in the bored hole under the road including passing of cable of size 2x16 sqm and disposal of spoil to a distance n exc 125 m all as specified and directed by the Engineer in Charge (MS pipe and fitting measured and paid separately).
S.F and laying into horizontal bore hole under the road 50 mm dia MS pipe heavy duty 3.25 mm wall thickness, welded and socketed ends as specified and directed by Engineer in-Charge.
M/L highly efficient high power LED street light with lense aesthetically designed fitting with pressure die cast aluminum housing top opening service cover, reflector and enclosed with toughened glass IP-66 protection suitable to mount on 40mm dia mast along with wiring with copper wire of suitable size 90 watt conforming to IS -10322(part 5/Section 3 2012) Havells,Wipro, osram, Halonix, Philips.
L G BUILDERS
mtechassociates
M/s. Kansal Construction Co.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .