Construction of ANMT HOSTEL AT DISTRICT HOSPITAL UDHAMPUR (Balance Work).

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) Crushed

Providing and laying 50 mm thick with 20mm nominal size stone aggregate. Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry. including 5 mm thick glass strips fixe as per direction of engineer incharge.

Brick work with common burnt clay F.P.S.(non-modualar)bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand)

Extra for brick work in superstructure above plinth level upto floor V level. (By manual means)

15mm Cement plaster of mix: 1 : 6( 1 cement : 6 fine sand) with making of groove between brick work and RCC

Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15° slope. excluding cost of centering and shuttering , all work upto floor V level

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. TMT bars

Centring and shuttermg including strutting, propping etc. and removal of form for·

Suspended floors, roofs, landings, balconies and access platform.

Edges of slabs and breaks in floors and walls. Under 20 cm wide

25mm thick Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement: 4 coarse sand)

Providing and fixing gang saw cut mirror polished (premoulded and pre polished), machine cut Granite of any colour and shape(18mm thick) for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.(Area of slab under 0.5 sqm) EXCLUDING COST OF GRANITE(available at site)

Extra for providing edge moulding to 18 mm thick marble stone counters, Vanities etc. over item no. 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite work

Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble I stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on old / primed work (Two or more coats applied @ 1.43 litres/1 0 sqm) over existing cement paint surface.(Nerolac/Asian paint/Berger/ICI-Dulux)

Providing & fixing 5.5mm thick clear float Glass panes in Window shutters / fixed frames (saint Gobain or equivalent make). including teak fixed beading 1.5" x 0.5". Where ever required (saint Gobins make only)

Providing & fixing 4.0mm thick clear float Glass panes in Window shutters / fixed frames (saint Gobain or equivalent make). including teak fixed beading 1.5" x 0.5". Where ever required

Providing and fixing M.S grills of required pattern in frames of window etc. with M.S flats square or round bars etc, including priming coat with approved steel primer and two or more coat of synthetic enamel paint all complete, fixed to openings/ wooden frames with rawl plugs screws etc.

Providing and fixing 1 mm thick M.S. steel door with frame of 40x40x6mm angle iron & outer frame of 50x50x6mm angle ironand 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6mm for diagonal braces and central cross piece.

Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)(Nerolac/Asian paint/Berger/ICI-Dulux)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade on wood / steel work. Two or more coats on new work (Nerolac/Asian paint/Berger/ICI-Dulux)

Fixing 35 mm thick wooden window shutters/ Flush door shutter excluding cost of shutters and fitting.

Providing and fixing lSI : 12817 marked Stainless Steel Butt Hinges (heavy weight) with Stainless Steel screws etc. complete.

Providing & fixing aluminium sliding door Bolts ISI marked anodized (annodic coating not less than grade AC 10 as per IS: 1368) transparent or dyed to required colour or shade with necessary screw etc. 300x16mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete

Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete.200 mm weighing not less than 120 gms.

Providing and fixing IS: 3564 marked Aluminium extruded section body tubular type universal hydraulic door closer,(having superior brand) embossed on the body, door weight upto 36-80 l<g and door width upto 700-1000 mm with double speed adjustment with necessary accessories and screws etc.complete :

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface Water thinable Cement primer on new work (Nerolac/Asian paint/Berger/ICI-Dulux)

Cleening of all floors(20000sft approx), roof, doors, grills, windows of Hostel building with the required tile cleaner/ detergent, cleaning drain & Uprooting weeds and disposal of uprooted vegetation (including sppray of weedicide like roundup) in and around hostel Building and dressing of ground as required as per the direction of engineer incharge

Plumbing/Sanitary work

Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied W.C. pan with lSI marked white solid plastic seat and lid. W.C. pan with lSI marked white solid plastic seat and lid.(Hindware/cera/parryware)

Providing and fixing oval shape wash basin 450 x 350 mmwith C. I./M.S. bracket (Hindware/cera/parryware)

providing and fixing White Vitreous China Flat back wash basin of size 550 x 400 mm with including making all connections but excluding cost of fittings (Hindware/cera/parryware)

Providing and fixing C.P. brass centre hole basin mixer piller tap of approved quality and make, weighing not less than 1.970 kg. 15 mm nominal bore of standard back type.(Hindware/jaguar/parryware)

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back ,for the reception of pipes and fittings.(Hindware/cera/parryware)

Providing and fixing Salem Stainless Steel A lSI 304 (18/8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including 32mm C.P Brass Waste Coupling, painting of fittings and brackets, cutting and making good the walls wherever required: (neelkanth, nirala, Chilley)

610 x 510 mm bowl depth 200mm

610 x 460 mm bowl depth 200mm

Providing and fixing cp brass waste coupling 32 mm half thread pipe(Jaquar/ marc/ Kohler/ jainko/or Equivalent (Hindware/jaguar/parryware)

Providing and fixing 600x450 mm bevelled edge mirror 5mm thick of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (modi gaurd, Saint Gobins)

Providing and fixing C.P. Jet spray set with connection pipe (Hindware/jaguar/parryware)

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931 15 mm nominal bore, including cost of extension nipple where ever required (Hindware/jaguar/parryware)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 15 mm nominal bore, including cost of extension nipple where ever required (Hindware/jaguar/parryware)

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore, including cost of extension nipple where ever required (Hindware/jaguar/parryware)

Providing and fixing s s 304 grade 125 mm dia. jali

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 150 mm diameter with CP rod 9 inch long (Hindware/jaguar/parryware)

Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete.Flexible pipe 32 mm dia (supreme, finolex )

Providing and fixing PTMT shelf 440 mm long , 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.(paryag)

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 1 02mm, heigth of 75mm with concealed (paryag)

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms. (paryag)

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than190 gms.(paryag)

Providing and fixing CP brass flenge (Hindware/jaguar/parryware)

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore

Providing and fixing G.l. pipes complete with G.l. fittings excluding trenching and refilling etc. (external work) 32 mm dia. Nominal bore, medium (surya Prakesh, Jindal make)

Labour charges for fixing 32 mm (nominal) bore G.I pipe line to wll/ceiling/floors, including labour charges for G.I fittings, clamps, joints testing and make good to surface excluding chasing and refilling. (excluding cost of material)

Labour charges for making G.I connections of G.I branches with G. I mains 32mm nominal bore, water line including fixing of tee by cutting and threading the pipe. (excluding cost of material)

Labour charges for fixing motor pump and making G.I connections with G. I mains 32mm nominal bore, water line including fixing of complete accessories as required by cutting and threading the pipe. (excluding cost of material)

Labour charges for laying in position110mm dia PVC pipes to wall. (excluding cost of material)

M/s PARVEZ IQBAL

M/S MEHRAB BUILDERS