Sand Fund

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/304 MORTH

Plain Cement Concrete (1:5:10) prop nominal mix (cement: fine aggregate: coarse aggregate) using 40mm size HBG (SS5) metal from approved quarry including Cost and Conveyance of all materials like cement, sand, coarse aggregate, water etc. to 2 site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)

Random Rubble stone masonry, in CM (1:6) prop: (Cement: Sand) using hard granite stones from approved quarry including Cost and Conveyance of all materials like Granite stones, cement, sand, water, etc., to site including all operational, incidental, and labour charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., complete for finished item of work for foundation (APSS No. 601 & 615)

Supply and filling of gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) including cost and conveyance of all material and labour charges,etc., complete.

RCC M-20 Nominal mix (Cement: fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials 5 like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding cantering, shuttering.

100mm thick roof slab

Masonry work in CM (1:8) prop with Flash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flash solid blocks using flash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., complete with a compressive strength not less than 50 kg/sqm for walls for Superstructure Walls.

Supplying and fixing of Iron Welded Door and Grills, including cost and conveyance of all materials and labour charges etc.. Complete

Ornamental plastering to ceiling 12mm thick in CM (1:3) with dubara sponge finish including Cost and Conveyance of all materials like cement, sand, water etc., to site, including other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, finishing, scaffolding, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, curing, etc., complete for finished item of work. (APSS 901& 903)

Plastering 12mm thick double coat in CM (1:5) 8 mm thick base coat and CM (1:3) of 4mm thick top coat with dubara sponge finish including c/c of all materials like cement, sand, water etc., to site, other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, finishing, curing, etc., complete for for finished item of work. (APSS 901.903 & 904)

Painting to New Interior Walls with two coats of Plastic Emulsion paint of Asian/Berger / Nerolac / Saicoat/Endocem or equalent quality of approved brand and shade as approved by the Engineer-in-Charge over base coat of cement primer water base grade II exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove al 10 loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost o brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for external Walls. (APSS No. 911) NOTE:: Standard data revised vide Chief Engineer, R&B (Buildings) Procs.No.CEB/TA8/AEE3/SSR: 2010-11 Dt: 21.01.2011.

Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complet including etc., complete for finished item of work,

Dadooing to walls with coloured glazed tiles 1st. quality of any size of brand as approved by Engineer-in-charge and set ove a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste 12 mixed with pigment of matching shade including cost and conveyance of all materials like cement, fine sand (screened), water tiles, etc. to site, such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work (APSS No.701 & 707)

Painting to New External Walls with two coats of Plastic Emulsion paint of Asian/ Berger/Nerolac / Saicoat / Endocem or equalent quality of approved brand and shade as approved by the Engineer - in - Charge over base coat of cement primer water base grade -II exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including 13 cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for external Walls. (APSS No. 911) NOTE :: Standard data revised vide Chief Engineer, R&B (Buildings) Procs.No.CEB/TA8/AEE3/SSR: 2010-11 Dt: 21.01.2011. for external walls

Providing high yield strength deformed (HYSD) steel TMT bars (Fe 415 grade as per IS 1786 1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and 4 drawings including Cost and Conveyance of bars from approved sources to site of work with all taxes including Cost and Conveyance of binding wire, cover blocks chains, overlaps, spaces, dowels, wastage etc, and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work (APSS No.126) in all floors

Ring for leach pit 1M dia

Supply fixing of leach pit cover

WATER SUPPLY AND SANITARY ARRANGEMENTS

Supplying, laying, jointing and testing 101.6 mm SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with airtight cement joints in CM 1:5:1 prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 914.4 mm (3'0') depth and refilling with watering and tamping.

Supply and fixing of 3" (76.2 mm) Nahany Trap with Jali - UPVC/SWR Pipe fittings (Prince/Sudhakar or any ISI Brand) including cost and conveyance of all materials and labour charges etc., complete for All Floors. including cost and conveyance of all materials and all incidental and operational, labour charges, lift charges, but excluding seignorage charges and VAT etc., complete for finished item of work. (A.P.S.S. No. 1325).

Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard Cl brackets including wooden block: 450 x 300 mm - Single C.P. Pillar cock including cost of all material and labour charges but excluding VAT.

Supplying & Fixing Indian pattern white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI Mark: 580 mm Long

Supplying & Fixing of CP Long body bib cock fancy type deluxe heavy duty 12.7 mm dia Indian make Seiko/ Senior/ Nice or equivalent including cost and conveyance of all materials to site, all labour charges complete for finished item of work for All Floors but excluding VAT. 15mm brass body

Providing & placing on Terrace polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and overflow pipes with all fittings including supply and fixing of 76.20mm dia PVC elbow 1st quality and 38.10mm dia PVC waste pipe outlet.

Supply and Fixing of CPVC Pipes (22.20mm OD Pipc - SDR 13.5 Jand Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) of Ashirvad / Ajay Flowquard.

Supply and Fixing of CPVC Pipes (28.60 mm OD Pipe - SDR 13.5 Jand Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) of Ashirvad / Ajay Flowguard.

Providing & fixing UPVC SWR pipes TYPE-B (Double socket 4 Kg/sq.cm- Prince/Sudhakar or any ISI Brand) conforming to IS 13592:1992 including necessary specials,jointing with adhesives,fixing vertical pipes over wooden battens including cost and conveyance of all materials at site, all taxes etc., complete