Supply of Construction Materials for 01 x CHDH in 2 Mtn Div Sector

SUPPLY OF CONSTRUCTION MATERIALS FOR 01 x CHDH AT F.O.R TEZU (ARUNACHAL PRADESH)

Ordinary Portland cement (OPC) 43 grade in 50 KG bags (Make: ACC/Ultra tech/ Birla Gold/CCI)

Sand Fine.

Stone aggregate graded 10-20 mm

Stone aggregate graded 20-40 mm

Stone aggragate graded 40-63mm

Non skid tiles ceramic 600 x 600mm x 10mm thick. (Make: Kajaria / Asian/ Orient/ Johnson)

Non skid tiles ceramic 300 x 300mm x 7mm thick. (Make: Kajaria/Asian/Orient/Johnson)

Glazed ceramic tiles 300 x 200 x 8mm thick (Make: Kajaria/Asian/Orient/ Johnson)

Precast cement concrete Brick of size 230 x 100 x 75 mm

TMT bar 8 mm diameter. (Make: TATA/SAIL/JAI BALAJI)

TMT bar 10 mm diameter. (Make: TATA/SAIL/JAI BALAJI)

TMT Bar 16mm diameter. (Make: TATA/SAIL/JAI BALAJI)

Nails 2".

Nails 3".

Granite stone slab 2 x 0.6Mtr 20 to 22mm thick

Water proofing compound. (Make: Doctor Fixit)

White cement (Make: Birla/ J.K )

Interlocking Tile 20 x 11.50 x 7.5 CM

Wash Hand Basin with CP waste coupling and waste pipe along with MS Bracket suitable for fixing of WHB. (Make:Parryware/Cera/Hindware/Hindustan)

Stainless steel kitchen sink with CP waste coupling and waste pipe along with angle base frame (Make: industan/Bharat/SONA)

PVC Waste Pipe 32mm dia.

PVC Waste coupling 32mm dia.

PVC bib cock 15mm dia. (Make: Prayag)

PVC Connection Pipe 450mm longwith both side of neat of size 15mm diameter.

CP brass Stop Cock 15mm diameter. (Make: Bharat/Parryware/Sona/Prayag)

CP brass Bib Cock 15mm diameter. Make : Bharat/Parryware/Sona/Prayag.

CP brass Pillar Cock 15mm diameter. (Make: Bharat/Parryware/Sona/Prayag)

Staging for water storage tank 1000 ltr capacity of MS angle iron of size 1200mm x 1200mm of height 3000mm made of angle iron 50 x 50 x 5mm with all side diagonal bracing of angle iron 40mmx40mmx5mm. MS plate 3.15mm thick to be provided on top of staging. The MS plate to be supported by three numbers angel iron 40 x 40 x 5mm fixed with nut and bolts (all as per shown on drawing), including painting the MS structure with two coats of synthetic enamel paint over a coat of red oxide primer.

Plastic water tank for storage of drinking water manufactured under rotationally moulded process using FDA approved grade of High Density Polyethylene Enamel (HDPE) duly stabilized for out door appliances produced in cylindrical vertical shape with manhole and lockable hinged type lid shall be provided in 1000 ltrs water capacity. Material shall be conform as per IS specification IS- 12701 : 1996 (Make: Supreme/Sintex or Equivalent ISI marked)

Float Valve brass 25 mm with complete set ISI Marked.

PPR Tank Connector 25mm diameter. (Make: SFMC/JINDAL/WETFLOW)

PPR Pipe (PN-16/SDR 7.4) 25mm diameter (3 Layers-outer green UV stabilized, middle black and inner Auit microbial white colour) ISI Marked. (Make: SFMC/JINDAL/WETFLOW)

PPR Elbow 25mm diameter female threaded. (Make: SFMC/JINDAL/ WETFLOW/KPT)

25mm diameter PPR Elbow 900. (SFMC/JINDAL/ WETFLOW/KPT)

PPR Tee 25mm diameter. (Make: SFMC/JINDAL/ WETFLOW/KPT)

PPR Socket 25mm diameter. (Make: SFMC/JINDAL/ WETFLOW/KPT)

PPR Gate Valve 25mm diameter ISI Marked. (Make: SFMC/JINDAL/ WETFLOW/KPT))

PPR Union 25mm diameter ISI Marked. (Make: SFMC/JINDAL/ WETFLOW/KPT)

PPR Union 20mm diameter ISI Marked. (Make: SFMC/JINDAL/ WETFLOW/KPT)

PPR reducing elbow 25-20mm diameter. (Make: SFMC/JINDAL/ WETFLOW/KPT)

PPR reducing elbow 25-15mm diameter. (Make: SFMC/JINDAL/ WETFLOW/KPT)

PPR Pipe (PN-16/SDR 7.4) 20mm diameter (3 Layers - outer green UV stabilized, middle black and inner Auit microbial whiter colou) ISI Marked. (Make: SFMC/JINDAL/ WETFLOW/KPT)

PPR Tee 20mm diameter. (Make: SFMC/JINDAL/ WETFLOW/KPT)

PPR Nipple 20mm diameter. (Make: SFMC/JINDAL/ WETFLOW/KPT)

PPR Nipple 25mm diameter. (Make: SFMC/JINDAL/ WETFLOW/KPT)

PPR Elbow 20mm Female threaded. (Make: SFMC/JINDAL/ WETFLOW/KPT)

20mm diameter PPR Elbow 900. (Make: SFMC/JINDAL/ WETFLOW/KPT)

PPR Socket 20mm diameter Female threaded. (Make: SFMC/JINDAL/ WETFLOW/KPT)

Aluminium Clamp suitable for fixing of 20mm diameter PPR pipe. Make : SFMC/JINDAL/ WETFLOW/KPT)

Aluminium Clamp suitable for fixing of 25mm diameter PPR pipe. (Make: SFMC/JINDAL/ WETFLOW/KPT)

PPR End cap 25mm diameter for PPR pipe. (Make: SFMC/JINDAL/ WETFLOW/KPT)

PPR End cap 20mm diameter for PPR pipe. (Make: SFMC/JINDAL/ WETFLOW/KPT)

PPR Welding tools for 20mm diameter for PPR pipe. (Make: SFMC/JINDAL/ WETFLOW/KPT)

PPR Welding tools for 25mmdiameter for PPR pipe. (Make: SFMC/JINDAL/ WETFLOW/KPT)

CP towel rail 20mm diameter. (Make: Bharat/Paryaware/sona)

PVC SWR Pipe of 75mm diameter 6 Mtr long with collar for wastage water disposal to sock pit tank. (Make: Prestoplast/ ISI Marked)

PVC Floor Trap 75 diameter with grating. (Make: Prestoplast/ ISI marked)

PVC Floor Trap 100 diameter with grating. (Make: Prestoplast/ ISI marked)

PVC Tee 75mm diameter ISI Marked.

PVC Elbow 75mm diameter ISI Marked.

PVC Coupler 75mm diameter ISI Marked.

Soap rack chromium plated.

PVC Frame looking Mirror 600 x 450mm. (Make: Atul/Swastik)

Thread Gola

Screw 1/2" (100 Nos in Pkt)

Putty for fixing glass panes.

Wall putty

Darpory rod 5' long 20mm dia

Darpory rod 4' long 20mm dia

Bracket for Drapory Rods

Lime unslaked of best quality (Make: TATA)

GI earthing plate 600x600x6mm thick with 10 mm dia, 25 mm long 02 Nos nut & bolts.

Common Salt

Charcoal

GI wire 4mm (8 SWG)

CI cover 5mm thick (300 x 300mm size) hinged to CI frame

GI funnel with wire mesh

Rawl plug (Pkt of 100 Nos)

Screw Steel Full threaded 32 mm (Pkt of 100 Nos)

GI Pipe 20mm dia 6' long Light grade (Make: Jindal /TATA)

GI Pipe 50mm dia 6' Long medium grade (Make: Jindal /TATA)

Bricks Sub class B bricks

Surface and wall mounted LED tube rod 15 watt, 1600 lumens output with suitable fitting frame. Frame shall be powder coated with aesthetically designed dual colour ends caps with bipin holder, connector block complete. Make - Bajaj / Havells / Philips.

Pixel bulk head fittings in deep drawn anodized aluminium body, epoxy white powder coated and heat resistant prismatic glass cover with specially designed gasket with LED lamp 1 X 5 watt. Make - Bajaj / Philips / Crompton / Surya / Havells.

Ceiling Fan 1200 mm sweep with 5 step fan regulator one modular conforms to IS : 2312, ISI marked with double ball bearing with modular fan regulator. Fan hooks with MS clamps, bolts and nuts. Make : Fan - Khaitan / Usha / Bajaj / Crompton Greaves. Modular Fan Regulator : Havells / Legrand

Exhaust Fan 300mm sweep, ISI marked with heavy speed motor and louvers. Make - Khaitan / Usha / Bajaj / Polar / Orient

PVC insulated heavy duty 1100 volt grade cable with aluminium conductor twin core 10 Sqmm served with sheathing of PVC tape and overall PVC sheathed, flat or circular. Make - Plaza / Paragon / Finolex / Havells

Porcelain insulating hangers

PVC sheathed, unarmoured, stranded, copper conductor cable of size 1 sqmm dia conform to IS 694/1990 (green in color of 90 m roll). Make - Plaza / Paragon/Finolex/Havells

PVC sheathed, unarmoured, stranded, copper conductor cable of size 1.5 sqmm dia conform to IS 694/1990 (red / black in color of 90 m roll) Make - Plaza / Paragon/Finolex/Havells

PVC sheathed, unarmoured, stranded, copper conductor cable of size 2.5 sqmm dia conform to IS 694/1990 (red / black in color of 90 m roll) Make - Plaza / Paragon/Finolex/Havells

PVC sheathed, unarmoured, stranded, copper conductor cable of size 4.0 sqmm dia conform to IS 694/1990 (red / black in color of 90 m roll) Make - Paragon/Finolex/Havells

Modular Switch Piano Flush type 6 Amps 240 volts single pole one way. Make : Havells / Legrand

Modular Switch Piano Flush type 16 Amps 240 Volts single pole one way. Make : Havells / Legrand

Modular socket outlet multipurpose 2/3 pin 6 Amps flush button type. Make : Havells / Legrand

Modular socket outlet multipurpose 2 in 1. 6 and 16 Amps. Make : Havells / Legrand

Surface mounting plastic boxes suitable for modular switches 12 module of Size 8" x 6". Make : Havells / Legrand

Surface mounting plastic boxes suitable for modular switches 8 module of Size 9" x 3". Make : Havells / Legrand

Surface mounting plastic boxes suitable for modular switches 6 module of Size 8" x 3". Make : Havells / Legrand

Surface mounting plastic boxes suitable for modular switches 4 module of Size 5" x 3". Make : Havells / Legrand

Combined Cover Plate with frame (inner & outer) white suitable for modular switch / socket of 12 module. Make : Havells / Legrand

Combined Cover Plate with frame (inner & outer) white suitable for modular switch / socket of 8 module. Make : Havells / Legrand

Combined Cover Plate with frame (inner & outer) white suitable for modular switch / socket of 6 module. Make : Havells / Legrand

Combined Cover Plate with frame (inner & outer) white suitable for modular switch / socket of 4 module. Make : Havells / Legrand

Blanking plate for modular switch / socket. Make : Havells / Legrand

Ceiling Rose, surface bakelite, 65 x 50mm, 2 to 3 terminals. Make - Anchor / Crabtree

Flexible pipe, PVC heavy duty, 20 mm dia

PVC pipe 20 mm dia, heavy duty, ISI marked. Make - Polycab / Suncab / Indoplast / Surya

PVC Elbow for 20mm dia PVC pipe heavy duty, ISI Marked. Make - Polycab / Suncab / Indoplast / Surya

PVC Space Bar saddles for 20mm dia PVC Pipe. Make - Polycab / Suncab / Indoplast / Surya

PVC coupler for 20 mm dia PVC Pipe. Make - Polycab / Suncab / Indoplast / Surya

PVC Tee for 20 mm dia PVC Pipe. Make - Polycab / Suncab / Indoplast / Surya

25mm PVC casing capping, not less than 2 mm thick. Make - Suncab / Polycab / Indoplast / Surya

PVC Coupler for 25mm Casing Capping pipe. Make - Polycab / Suncab / Indoplast / Surya

PVC Tee for 25mm casing and capping pipe. Make - Polycab / Suncab / Indoplast / Surya

PVC Socket for 25mm casing and capping pipe. Make - Polycab / Suncab / Indoplast / Surya

PVC Elbow for 25 mm casing and capping pipe. Make - Polycab / Suncab / Indoplast / Surya

PVC Corner Bend for 25 mm casing and capping pipe. Make - Polycab / Suncab / Indoplast / Surya

32mm PVC casing capping, not less than 2 mm thick. Make - Suncab / Polycab / Indoplast / Surya

PVC Coupler for 32mm Casing Capping pipe. Make - Polycab / Suncab / Indoplast / Surya

PVC Tee for 32mm casing and capping pipe. Make - Polycab / Suncab / Indoplast / Surya

PVC Elbow for 32 mm casing and capping pipe. Make - Polycab / Suncab / Indoplast / Surya

PVC Corner Bend for 32 mm casing and capping pipe. Make - Polycab / Suncab / Indoplast / Surya

PVC Junction Box two way 20mm dia. Make - Polycab / Suncab / Indoplast / Surya

PVC Junction Box three way 20mm dia. Make - Polycab / Suncab / Indoplast / Surya

PVC Junction Box four way 20mm dia. Make - Polycab / Suncab / Indoplast / Surya

PVC junction linker, 75 x 75mm. Make - Prestoteak/Polycab/Suncab

House service bracket (Hook type) complete with 3 m long GI pipe 40 mm dia medium grade, with two Nos 900 bend, MS hooks/clamps and stay or guy

MCB DB 8 Way SPN, 240 volt conform to IS 13032, breaking cap 15 KA. Make - Havells / Indoasian / Legrand

MCB 16 A SP, 240 volt, breaking capacity 10KA, conform to IEC-60898(2002) and IS 8828(1996). Make - Havells/Indoasian/ Legrand

MCB 40 A DP, 240 Volt, breaking capacity 10kA, conform to IEC-60898 (2002) and IS 8828 (1996). Make - Havells / IndoAsian / Legrand

Insulation tape 19mm width, 25m long. Make - Steel grip/Anchor

No 8 x 19 CSK screw

No 8 x 32 CSK screw

No 8 x 50 CSK screw

No 8 x 75 Bolts and Nuts full threaded.

M/S Purbanchal Traders

GOLDEN ENTERPRISES

Bidder Name

GOLDEN ENTERPRISES

M/s S.Billai & Sons