Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.5 LAccepted-AOC 17 NO TIKIA MAHAL ORDERLY BAZAR PO PS BARRACKPORE DIST 24 PGS KOLKATA 700120 WB | KOLKATA | 24 PGS | WB | 700120 | L1 | Accepted-AOC L1 BIDDER. | |
| 2 | L2₹30.4 L+₹5.5 L (22.0%)Rejected-AOC 00 BALITIKURI BALITIKURI NASKARPARA HOWRAH WEST BENGAL 711113 | HOWRAH | WEST BENGAL | 711113 | L2 | Rejected-AOC NOT L1 BIDDER. | |
| 3 | L3₹30.5 L+₹5.6 L (22.3%)Rejected-AOC | L3 | Rejected-AOC NOT L1 BIDDER. | |
| 4 | L4₹33.6 L+₹8.6 L (34.6%)Rejected-AOC | L4 | Rejected-AOC NOT L1 BIDDER. | |
| 5 | L5₹33.6 L+₹8.6 L (34.6%)Rejected-AOC 28 H TOLLYGUNGE CIRCULAR ROAD KOLKATA 700053 | KOLKATA | KOLKATA | WEST BENGAL | 700053 | L5 | Rejected-AOC NOT L1 BIDDER. |
| Sl No | Description | Qty | Unit | P N GUPTA AND SONS L6 | B N ENTERPRISE L1 | M/S NEHAL ENTERPRISES L3 | CONSTRUCTION AND MAINTENANCE ENGINEERING CORPORATION L5 | KIRAN TRADERS L7 | TIMBA L9 | PUNAM ENTERPRISE L4 | TAMALIKA ENTERPRISE L8 | M/S. CHAKRABORTY ENTERPRISE L2 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00Drg No : (FD-67(M)/1031 Repair of Almirah large Steel with shelves as appended below : Removing of existing u/s fitting/fixtures of Almirah large steel and refixing / welding with new items and minor repair applying two coats of Synthetic enamel paint over a coat of red oxide, complete all as specified on drawing and as directed. Make of 16 Gauge CRCA sheet : Tata/ Jindal/ Surya/ Prakash/ SAIL/ Tisco | ||||||||||||
| 1.01 | Leg of 16 gauge CRCA sheet.
Note:- Each leg will be measured as one unit. | 24 | Each | 370 ₹8,880 | 295 ₹7,080 | 400 ₹9,600 | 361 ₹8,664 | 379 ₹9,096 | 388 ₹9,312 | 361 ₹8,664 | 380 ₹9,120 | 239 ₹5,736 Lowest |
| 1.02 | Locking device (except MS rod & lock) Make:- Godrej / Harrison / Link | 10 | Each | 170 ₹1,700 | 130 ₹1,300 Lowest | 200 ₹2,000 | 166 ₹1,660 | 174 ₹1,740 | 178 ₹1,780 | 166 ₹1,660 | 175 ₹1,750 | 149 ₹1,490 |
| 1.03 | MS Rod 10mm dia (except lock) to match with the existing locking arrangement of almirah | 15 | Each | 183 ₹2,745 | 140 ₹2,100 | 100 ₹1,500 Lowest | 178 ₹2,670 | 186 ₹2,790 | 191 ₹2,865 | 178 ₹2,670 | 189 ₹2,835 | 119 ₹1,785 |
| 1.04 | Chromium plated handle.
Make:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset | 42 | Each | 85 ₹3,570 | 60 ₹2,520 Lowest | 100 ₹4,200 | 83 ₹3,486 | 87 ₹3,654 | 89 ₹3,738 | 83 ₹3,486 | 87 ₹3,654 | 79 ₹3,318 |
| 1.05 | MS hinges of size 75mm, made of 1.6 mm thick MS sheet | 30 | Each | 48 ₹1,440 | 40 ₹1,200 Lowest | 100 ₹3,000 | 47 ₹1,410 | 49 ₹1,470 | 50 ₹1,500 | 47 ₹1,410 | 49 ₹1,470 | 49 ₹1,470 |
| 1.06 | Lock 6 lever with duplicate key
( Make- Harison/ Link /Godrej). | 25 | Each | 427 ₹10,675 | 300 ₹7,500 | 150 ₹3,750 Lowest | 416 ₹10,400 | 436 ₹10,900 | 447 ₹11,175 | 416 ₹10,400 | 441 ₹11,025 | 399 ₹9,975 |
| 1.07 | MS cleats & pin | 32 | Each | 8 ₹256 | 7 ₹224 Lowest | 100 ₹3,200 | 8 ₹256 | 8 ₹256 | 8 ₹256 | 8 ₹256 | 8 ₹256 | 9 ₹288 |
| 1.08 | Shelves made out of 1mm thick MS sheets.
Note:- Each shelve will be measured as one Unit. | 12 | Each | 427 ₹5,124 | 300 ₹3,600 | 500 ₹6,000 | 416 ₹4,992 | 436 ₹5,232 | 447 ₹5,364 | 416 ₹4,992 | 441 ₹5,292 | 299 ₹3,588 Lowest |
| 1.09 | Shutter made out of 1mm thick MS sheets.
Note:- Each shutter will be measured as one unit | 4 | Each | 915 ₹3,660 | 720 ₹2,880 | 500 ₹2,000 Lowest | 892 ₹3,568 | 936 ₹3,744 | 959 ₹3,836 | 892 ₹3,568 | 947 ₹3,788 | 799 ₹3,196 |
Tender Value
₹33 L
EMD Value
₹66,000
Closing Date
27 Dec 2025, 6:00 pmClosed
GE NORTH KOLKATA
GE NORTH KOLKATA, 46 BT ROAD, KOLKATA - 700050
REPAIRS REPLACEMENT MAINTENANCE OF STEEL AND WOODEN FURNITURE INCLUDING PAINTING, POLISHING AND CANNING OF VARIOUS UNIT OF KOLKATA AREA UNDER GE (NORTH) KOLKATA
2025_MES_743243_1
8530/25-26/E8(GE(N)/KOL/ OF 2025-26)
Open Tender
Miscellaneous Works
Item Rate
210 days
KOLKATA AREA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE NORTH KOLKATA
₹66,000
Yes
26 Feb 2026
5 Dec 2025
29 Dec 2025
6 Dec 2025
27 Dec 2025
20 Dec 2025
Amount
Drg No : (FD-67(M)/1031 Repair of Almirah large Steel with shelves as appended below : Removing of existing u/s fitting/fixtures of Almirah large steel and refixing / welding with new items and minor repair applying two coats of Synthetic enamel paint over a coat of red oxide, complete all as specified on drawing and as directed. Make of 16 Gauge CRCA sheet : Tata/ Jindal/ Surya/ Prakash/ SAIL/ Tisco
Leg of 16 gauge CRCA sheet. Note:- Each leg will be measured as one unit.
Locking device (except MS rod & lock) Make:- Godrej / Harrison / Link
MS Rod 10mm dia (except lock) to match with the existing locking arrangement of almirah
Chromium plated handle. Make:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset
MS hinges of size 75mm, made of 1.6 mm thick MS sheet
Lock 6 lever with duplicate key ( Make- Harison/ Link /Godrej).
MS cleats & pin
Shelves made out of 1mm thick MS sheets. Note:- Each shelve will be measured as one Unit.
Shutter made out of 1mm thick MS sheets. Note:- Each shutter will be measured as one unit
Drg No.:- (FD-67(M)/1032 Repair of Almirah Medium Steel with shelves as appended below : Removing of existing u/s fitting/fixtures of Almirah medium steel and refixing / welding with new items and minor repair applying two coats of Synthetic enamel paint over a coat of red oxide, complete all as specified on drawing and as directed. Make of 16 Gauge CRCA sheet : Tata/ Jindal/ Surya/ Prakash/ SAIL/ Tisco
Leg of 16 gauge CRCA sheet Note:- Each Leg will be measured as one unit
Locking device (except MS rod & lock) Make:- Godrej / Harrison / Link
MS Rod 10mm dia (except lock) to match with the existing locking arrangement of almirah
Chromium plated handle, Make:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset
MS hinges of size 75mm, made of 1.6 mm thick MS sheet Note:- Each hinge will be measured as one unit.
Lock 6 lever with duplicate key. ( Make- Harison/ Link /Godrej).
MS cleats & pin
Shelves made out of 1mm thick MS sheets Note:- Each shelve will be measured as one Unit.
Shutter made out of 1mm thick MS sheets Note:- Each shutter will be measured as one unit
Drg No.:- (FD-67(M)/1032 Repair of Almirah Large Steel 1/2 H 1/2 Sh as appended below : Removing of existing u/s fitting/fixtures of Almirah large steel 1/2 H 1/2 Sh and refixing / welding with new items and minor repair applying two coats of Synthetic enamel paint over a coat of red oxide, complete all as specified on drawing and as directed. Make of 16 Gauge CRCA sheet : Tata/ Jindal/ Surya/ Prakash/ SAIL/ Tisco
Leg of 16 gauge CRCA sheet Note:- Each Leg will be measured as one unit
Locking device (except MS rod & lock) Make:- Godrej / Harrison / Link
MS Rod 10mm dia (except lock) to match with the existing locking arrangement of almirah
Chromium plated handle, Make:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset
MS hinges of size 75mm, made of 1.6 mm thick MS sheet Note:- Each hinge will be measured as one unit.
Lock 6 lever with duplicate key. ( Make- Harison/ Link /Godrej).
MS cleats & pin
Shelves made out of 1mm thick MS sheets Note:- Each shelve will be measured as one Unit.
CP hanging rod (conduit pipe) 20mm dia, 1.6 mm thick.
Drg No.:- (FD-1028/TP) Repair of Book case steel as appended below : Removing of existing u/s fitting / fixtures of Book case steel and refixing / welding with new items and minor repair applying two coats of Synthetic enamel paint over a coat of red oxide, complete all as specified on drawing and as directed.
Shelf MS sheet 1 mm thick
Glass pane 5 mm thick of shutter
Lock 6 lever with duplicate keys
Steel Handle 100mm long.
Complete base of Mild steel sheet
Adjustment of shutter to easy functioning with necessary denting/ Welding to frame wherever required complete all as directed.
Drg No:- (FD-75M) Repairs to Chair Tubular Steel with arms (Chair CBA) for the following :- Removing old u/s fitting /Fixture of Chair CBA steel and supply and fixing new items applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified on drawing and as directed. Make of paint:- Asian / Berger / Jenson & Nicholson / Shalimar.
Supply & Fix Complete Seat 50 mm thick synthetic foam of 32 density made to shape for seat of 12 mm thick BWR grade plywood and shall be stitched with superior quality rexine cloth of approved colour, taxture and quality.
Supply & Fix Complete Back 50 mm thick synthetic foam of 32 density made to shape for back of 12 mm thick BWR grade plywood and shall be stitched with superior quality rexine cloth of approved colour, taxture and quality.
Supply & Fix 10 mm thick synthetic foam of 32 density made to shape for wooden handle and shall be stitched with superior quality rexine cloth of approved colour, taxture and quality.
Supply & Fix flat iron Stiffeners of 20 X3 mm thick, two numbers in each seat and back shall be welded to frame of chair as directed by GE of required size complete.
Welding to frames wherever required at cracked/broken portion
Supply & Fix PVC cap
Supply & Fix PVC Stud with screw
Drg No. (FD-75M) Repairs to Chair Tubular Steel without arms (Chair CB) for the following :- Removing old u/s fitting /Fixture of Chair CB without arm steel and supply and fixing new items applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified on drawing and as directed. Make for Paint:- Asian / Berger / Jenson & Nicholson / Shalimar.
Supply & Fix Complete Seat 50 mm thick synthetic foam of 32 density made to shape for seat of 12 mm thick BWR grade plywood and shall be stitched with superior quality rexine cloth of approved colour, taxture and quality.
Supply & Fix Complete Back 50 mm thick synthetic foam of 32 density made to shape for back of 12 mm thick BWR grade plywood and shall be stitched with superior quality rexine cloth of approved colour, taxture and quality.
Supply & Fix flat iron Stiffeners of 20 X3 mm thick, two numbers in each seat and back shall be welded to frame of chair as directed by GE of required size complete.
Welding to frames wherever required at cracked/broken portion
Supply & Fix PVC cap
Supply & Fix PVC Stud with screw
Drg No:- FD-256/359 or FD/MAP/II/06 Repairs to Chair Varandah for the following :-
Removing of old usnsv PVC sheet & back from Chair Varandah and prepare the conduit structure for painting by scrapping the old surface and painting with white synthetic enamal paint over a coat of white primer complete as directed.
Removing of old usnsv cane from Chair Varandah and prepare the conduit structure for painting by scrapping the old surface and painting with white synthetic enamal paint over a coat of white primer complete as directed.
Weaving the seat and back of Chair Varandah in Godrej pattern with 4 mm wide approved quality cane on steel surface of chair complete all as specified and as directed.
Replacement of old, cracked and decayed rubber shoes from its existing position and replace with new rubber shoe best quality in the same position as directed.
Supply and fixing 20 mm dia 16 gauge MS conduit pipe including welding /smoothening of joints and painted surface applying two coat of 1st class synthetic enamel paint white over a coat of red oxide all as specified and directed
Welding to frames wherever required at cracked/broken portion
Drg No.:- FD/E6/MAP/01 Repairs to Chair Computer for the following :- Removing old u/s fitting /Fixture of Chair Computer and supply and fixing new items All complete specified shown on drawing and directed.
Complete Seat 50 mm thick synthetic foam of 32 density made to shape for seat and shall be stitched with superior quality tapestry cloth of approved colour, taxture and quality
Complete Back 50 mm thick synthetic foam of 32 density made to shape for back and shall be stitched with superior quality tapestry cloth of approved colour, taxture and quality
Arm Rest complete.
PVC Base Five stair alongwith wheels
Revolving wheels
Hydraulic System with accessories (Air soft)
S&F Seat cover for seat and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality.
S&F back cover for back and shall be stitched with superior quality tapestry cloth of approved colour, taxture and quality.
Repairs to Chair Revolving High Back (TP) the following :- Removing old u/s fitting / Fixture of Chair Revolving /Chair revolving High back and supply and fixing new items all complete specified & directed (TP)
Complete Seat 50mm thick synthetic foam of 32 density made to shape for seat of 9 mm thick BWR plywoodand shall be stitched with superior quality tapestry cloth of approved colour, taxture and quality.
Complete Back 50mm thick synthetic foam of 32 density made to shape for back of 9 mm thick BWR plywoodand shall be stitched with superior quality tapestry cloth of approved colour, taxture and quality.
Arms rest of black integral skin polyurethane reinforced with MS insert complete.
Base 5 stair alongwith wheels
Wheels
Hydraulic System with accessories (Air soft)
S&F Seat cover for seat and shall be stitched with superior quality tapestry cloth of approved colour, taxture and quality.
S&F back cover for back and shall be stitched with superior quality tapestry cloth of approved colour, taxture and quality.
Drg No.:- FD/E6/MAP/12 Repairs to Chair Steel Visitor for the following :- Removing old u/s fitting /Fixture of Chair Executive visitor (Chair Writing Steel) such as seat,back etc and supply and fixing new items All complete specified shown on drawing and directed
Complete Seat 50mm thick synthetic foam of 32 density made to shape for seat and shall be stitched with superior quality tapestry cloth of approved colour, taxture and quality.
Complete Back 50mm thick synthetic foam of 32 density made to shape for back and shall be stitched with superior quality tapestry cloth of approved colour, taxture and quality.
Seat support mild steel strip 450mm x 20 mm x 03 mm with screw applying two coats of Synthetic enamel paint over a coat of red oxide primer.
Arms rest complete.
Welding to frames wherever required at cracked/broken portion
S&F Seat cover for seat and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality.
S&F back cover for back and shall be stitched with superior quality tapestry cloth of approved colour, texture and quality.
Drg No.:- FD/E6/MAP/05 Repairs to Chair school with Hand Board for the following :- Removing old u/s fitting /Fixture of Chair school with hand Board and supply and fixing new items All complete specified shown on drawing and directed.
Complete Writing Pad made of 18mm thick Pre laminated Particle board, exteriro grade, with one face decorative face and other side balancing white, alongwith 5mm thick wooden beading and fixing with chair handle with suitable hinges. Make:- Kitply,/ Bhutan board / Ecoboard / Nepal board / Archid ply / Merinova / M/s Green Ply Industries Ltd / Eco-board / Archid Lam / Century Lam / Shirdi Industries Ltd (ASIS).
Welding to frames wherever required at cracked/broken portion all as directed
Supply & fix New PVC Seat and Back including taking out old unserviceable seat and back complete all as specified and as shown on drawing.
Replacement of old, cracked and decayed rubber shoes from its existing position and replace with new rubber shoe best quality in the same position as directed.
Supply and fixing 25 mm dia 16 gauge MS conduit pipe including welding /smoothening of joints and painted surface applying two coat of 1st class synthetic enamel paint white over a coat of red oxide all as specified and directed
Drg No:- (FD-220/ 220 (R) :- Repairs to Charpoy GI Pipe for the following
Taking out broken/ u/s long rails from Charpoy GI pipe and Supply and fixing new long rails 1940 mm long duly threaded at both end out of GI tube 32mm dia medium grade all as spacified and directed. Make for GE Pipe:- Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal /Surya / Tata.
Taking out u/s short rails from Charpoy GI pipe and making short rails for GI charpoy made out of from broken long rails obtained from Charpoy including cutting & threading rails and fixing in replacement all as spacified and directed.
Taking out u/s legs from Charpoy GI pipe and making legs for GI charpoy made out of from broken short rails obtained from Charpoy including cutting & threading rails and fixing in replacement all as spacified and directed.
Taking out u/s check nut from long rails and S&F new check nuts of 6 mm wide,32 mm dia all as spacified and directed. Note:- Each check nut will be measured as one unit.
Taking out u/s GI elbow from Charpoy and S&F new GI elbow 32mm mm dia all as specified and directed.
Removing of old existing u/s newar from charpoy GI pipe , tightening the frame including welding whereever required and S&F new ply wood 12 mm thick BWR, ISI marked (size Approx 1950mm x 900mm) with 6 mm dia 30-35 mm long nut & bolts with washer (total 08 Nos) all as spacified and directed.
Removing of old existing u/s ply top from charpoy GI/ MS squre pipe , tightening the frame including welding whereever required and S&F new ply wood 12 mm thick BWR, ISI marked (size Approx 1950mm x 900mm) with 6 mm dia 30-35 mm long nut & bolts with washer (total 08 Nos) all as spacified and directed. Make of plywood for item Nos. 8.05 & 8.06:- Kitply / Greenply / National Plywood / Greenply / Century Ply / Archidply.
Supply and fixing Stiffener 02 Nos in each charpoy of 40 mm wide and 6mm thick MS flat iron welded to GI Charpoy frame perpendicular to long rail of approprate size on equal distance duly applying two coatss of black paint over a coat of red oxide,and 4 Nos of MS flat 100mmx25mmx6mm to be welded to the short rail for fixing ply wood all as spacified and directed.
Welding to frames wherever required at cracked/broken portion all as directed
Removing of old existing u/s Plytop from Charpoy IP (FD/MAP-II/01) , tightening the frame including welding whereever required and S&F new ply wood 12 mm thick BWR, ISI marked (size Approx 1950mm x 900mm) with 6 mm dia 30-35 mm long nut & bolts with washer (total 08 Nos) all as spacified and directed. Make of plywood :- Kitply / Greenply / National Plywood / Greenply / Century Ply / Archidply.
Removing of old existing u/s plywood from Charpoy Folding IP with Hard top (FD-388R), tightening the frame including welding whereever required and S&F new ply wood 12 mm thick BWR, ISI marked (size Approx 1950mm x 900mm) with 6 mm dia 30-35 mm long nut & bolts with washer (total 08 Nos) all as spacified and directed. Make of plywood :- Kitply / Greenply / National Plywood / Greenply / Century Ply / Archidply.
Drg No.:- FD-1029 Repairs to Locker bed side steel Steel for the following :- Removing old u/s fitting /Fixture of Locker bed side steel and supply and fixing new items applying two coats of synthetic enamel paint over a coat of red oxide primer all complete specified shown on drawing and directed
Leg made of 16 gauge CRCA sheet including necessary welding complete all as specified and shown on drawing. Note:- Each leg will be measured as one unit.
MS hinges of size 75mm of 1.6mm thick MS sheet duly welded reveling . Note:- Each hinge will be measured as one unit.
Mild Steel Shelves. Note:- Each shelve shall be measured as one unit.
Mild Steel Butt Hinges 50mm. Make:- ISI marked or best quality as approved by GE.
Complete Shutter
CP Hanging Rod ( conduct pipe) 20 mm dia 1.6mm thick Make:-Best quality as approved by GE.
Socket of CP for Hanging rod 20 mm dia
Chromium plated Handle 100mm with bolts, Make:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset..
Repairs to Rack steel 6'x3' for the following :- Removing old u/s fitting /Fixture of Rack steel and supply and fixing new items applying two coats of synthetic enamel paint over a coat of red oxide primer all complete specified shown on drawing and directed.
Shelves made out of 1mm thick MS sheet complete all as specified and shown on drawings.
Side of made out of 1mm thick MS sheet complete all as specified and shown on drawings.
Cutting u/s portion of angle iron and Supply and weld angle iron of40mmx40mmx4mm thick 100mm long with existing angle in base
Drg No.:- (FD/E6/MAP/02(R) Repairs to Rack shoe steel for the following:-Taking down existing U/S fitting/fixtures of Shoe Rack and refixing/ welding and minor repair applying two coats of synthetic enamel paint, first quality, over one coat of red oxide, all complete as specified and asspecified Make for paint:-Asian / Berger / Jenson & Nicholson / Shalimar.
Net Shelve Note:- Each shelve will be measured as one unit,
Welding to frame wherever required complete all as directed.
Rubber Shoe
Supply and fixing 25 mm dia 16 gauge MS conduit pipe including welding /smoothening of joints and painted surface applying two coat of 1st class synthetic enamel paint white over a coat of red oxide all as specified and directed.
Drg No. :- FD-84 (M) FD- 1003 Repair of Table office officer steel as appended below : Taking down existing U/S fitting/fixtures of Table office officer Steel and refixing/welding with new items and minor repair dully applying two coats of synthetic enamel paint, first quality, over a coat of red oxide all complete specified shown on drawing and directed. Make for paint:-Asian / Berger / Jenson & Nicholson / Shalimar.
Top of 18/19mm thick Prelaminated particle Board Exterior Grade, with one side decorative face and other face balancing, with 4 mm thick teak wood edging with french polishing, glossy finish, all around as in table top complete all as specified and as shown on drawing. Make:- Kitply,/ Bhutan board / Ecoboard / Nepal board / Archid ply / Merinova / M/s Green Ply Industries Ltd / Novapan / Archid Lam / Century Lam
Lock 4 lever with duplicate key Make: Harison / Link / Godrej
Drawers made out of 1mm thick MS sheet including spray painting using synthetic enamel paint , first quality, after preparation of surface and obtaining optimum finish surfac complete all as specified and shown on drawing. Make:- Asian / Berger / Jenson & Nicholson / Shalimar.
Adjustment of drawer to easy functioning with necessary denting/ Welding to frame wherever required complete all as directed.
Supply & Fix PVC toe shoes for bottom of leg, standard quality, complete all as specified and shown on drawings.
Welding to frame wherever required complete all as directed.
Drg No. :- FD 84 (M) FD 1004 Repair of Table office Clerk steel as appended below : Taking down existing U/S fitting/fixtures of Table office Clerk Steel and refixing/welding with new items and minor repair dully applying two coats of synthetic enamel paint, first quality, over a coat of red oxide all complete specified shown on drawing and directed. Make:- Asian / Berger / Jenson & Nicholson / Shalimar.
Top of 18/19mm thick Prelaminated particle Board Exterior Grade , one side decorative face and other face balancing white, 4 mm thick teak wood edging with french polishing, glossy finish, all around as in table top complete all as specified and as shown on drawing. Make:- Kitply,/ Bhutan board / Ecoboard / Nepal board / Archid ply / Green Ply / Novapan / Archid Lam / Century Lam
Lock 4 lever with duplicate key Make: Harison / Link / Godrej
Drawers made out of 1mm thick MS sheet including spray painting using synthetic enamel paint after preparation of surface and obtaining optimum finish surfac complete all as specified and shown on drawing. Make:- Asian / Berger / Jenson & Nicholson / Shalimar.
Adjustment of drawer to easy functioning with necessary denting/ Welding to frame wherever required complete all as directed.
Supply & Fix PVC toe shoes for bottom of leg , standard quality, complete all as specified and shown on drawings.
Welding to frame wherever required complete all as directed.
Drg No. :- FD-165 Repairs to Table dining ORs for the following :- Removing old u/s fitting /Fixture of Table Dining ORs steel and supply and fixing new items applying two coats of synthetic enamel paint , first quality, over a coat of red oxide primer all complete specified shown on drawing and directed.
Top of 18/19mm thick Prelaminated particle Board Exterior Grade, one side decorative face and other face balancing white 4 mm thick teak wood edging with french polishing, glossy finish, all around as in table top complete all as specified and as shown on drawing. Make:- Kitply,/ Bhutan board / Ecoboard / Nepal board / Archid ply / Green Ply / Novapan / Archid Lam / Century Lam
Leg made out 25mm X 25mm (16 gauge) square tube with welded including spray paint and obtaining optimum finished surface complete over a coat of red oxide primer using synthetic enamel paint, first quality, complete all as specified and shown on drawing. Note:- Each Leg will be measured as one unit.
Cutting u/s portion of Leg and Supply and weld square tube 25mmx 25 mmx16 Guage 100mm long with existing Leg in base.
Welding to frames wherever required at cracked/broken portion.
S & F new rubber shoes in place of crecked and decayed shoes of leg.
Drg No. :- (FD-1007/1008) Repair of Table 900x600x760 with and without Drawer steel as appended below : Taking down existing U/S fitting/ fixtures of Table 900x600mm with and w/o drawer Steel and refixing /welding with new items and minor repair all complete specified shown on drawing & directed
Top of 18/ 19 mm, thick Pre laminated Particle Board, Exterior Grade, one side decorative face and other face balancing white alongwith 5mm teak wood Beading, including spray paint and obtaining optimum finished surface complete over a coat of red oxide primer using synthetic enamel paint, first quality, complete all as specified and shown on drawing. Make:- Asian / Berger / Jenson & Nicholson / Shalimar.
Drawer made of 1 mm thick MS Sheet
Adjustment of drawer to easy functioning with necessary denting/ Welding to frame wherever required complete all as directed.
Brass lock for drawer with duplicate key Make:_ Godrej / Harrison / Link
Replacement of Rubber shoes with new one, standard quality.
Repair of Table 900x900x760 steel as appended below : Taking down existing U/S fitting/ fixtures of Table 900x900mm Steel and refixing /welding with new items and minor repair all complete specified shown on drawing & directed (FD-1009)
Top of 18 mm Pre laminated Particle Board alongwith 5mm Beading
S & F new rubber shoes in place of crecked and decayed shoes of leg
Repairs to Teapoy Varandah for the following (FD-255) :-
Taking down old decayed top and supply and fixing new top 18 mm thick pre-laminated particle board exterior grade with 5mm thick timber beading all around the edging complete all as directed.
Removing of rusted MS conduit pipe and Supply and fixing 18mm dia 16 gauge MS conduit pipe including welding/smoothe -ning of joints and painted surface applying one or more coat of synthetic enamel paint white all as specified and directed
Welding to frame wherever required complete all as directed.
S & F new rubber shoes in place of crecked and decayed shoes of leg
Repair of Table Computer as appended below : Taking down existing U/S fitting/ fixtures of Table Computer and refixing /welding with new items and minor repair all complete specified shown on drawing & directed (FD/E6/MAP/03)
Top of 18 mm Pre laminated Particle Board alongwith 5mm Beading
Shelf of 18 mm Pre laminated Particle Board alongwith 5mm Beading
Bottom of 18 mm Pre laminated Particle Board alongwith 5mm Beading
Complete Drawer made of 18 mm thick Pre laminated Particle Board with Kob on telescopic channels
Telescopic channels for Drawer and Key Board tray
Complete Key board tray made of 18 mm thick Pre laminated Particle Board on telescopic channels
Brass lock for drawer with duplicate key
Legs with nylone Buffer
Material & Labour for preparing of new or old steel surface (inside and outside surface) including doors, Shelves and legs and applying 1st class synthetic enamel spray paint optimum glossy finish surface over a coat or red oxide primer wherever required including complete preparation of surface and rectifying all minor defects all as specified and shown on drawing and as directed by EIC for the following Steel furniture :- Make of Polish:- Asain / Berger / J & N / Shalimar.
Almirah large Steel with shelves (FD-67(M)/1031
Almirah large Steel with shelves (FD-67(M)/1031 (Outside Only)
Almirah Medium Steel with shelves (FD-67(M)/1032
Almirah Medium Steel with shelves (FD-67(M)/1032 (Outside only)
Almirah large Steel 1/2 H 1/2 shelves (FD-1033)
Almirah large Steel 1/2 H 1/2 shelves (FD-1033 (Outside Only)
Book Shelf open small steel FD-69(M)
Book Shelf open Large steel FD-69(M)
Book case steel (Outside only) FD-1028/TP
Book case steel FD-1028/TP
CHAIR CB STEEL WITH ARMS FD-75(M)
CHAIR CB STEEL WITHOUT ARMS FD-75(M)
Chair Visitor/Chair writing (TP/FD-E6/MAP-12)
Chair school with Hand Board
Chair Computer FD/E6/MAP/05
Charpoy IP
Charpoy IP Folding
Locker bed side steel FD-1029
Locker bed side steel FD-1029 (outside Only)
Ladder for Loft FD-238
Stool Steel FD-81 (M)
Rack steel skeleton 7'-3"X 36"X18"
Rack Stationary steel FD-81(M)
Rack Record Steel (TP)
Rack steel 6'x3' (6 Tier)
Rack Shoe Steel (FD-MAP/02)
Rack side three space FD-97(M)
Table office Officer steel
Table office Clerk steel
Table dining Ors Steel FD-165
Teapoy Verandah
Table 900x900 mm steel (FD-1009)
Table 900x600x760 with Drawer steel (FD-1008)
Table 900x600x760 without Drawer steel (FD-1008)
WOODEN.FURNITURE Drg No : FD-21(M) FD-213 FD-245 FD-246 Repairs to Bed hard Ply top for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Bed hard ply top without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed.
Long rail .
Short rail
Stiffener
Head board frame Complete
Foot board frame Complete
Veneer with beading (Teak wood Shed) for Head Board
Veneer with beading (Teak wood Shed) for foot Board
Pywood 12mm thick BWR exterior grade as per IS 303 and fix with screws as in top of bed Make:- Kitply/Greenply/National ply/Century/ Archid/ Bhutan board / Ecoboard
Drg No : FD-244 Repairs to Bin soiled linen large for the following :-Removing old u/s fitting /Fixture of Bin soiled linen large and fixing with new 9 mm plywood with 5 mm thick wooden beading whereever required all as directed and minor repair as per required applying two coats of French Polish All complete specified shown on drawing and directed.
Bottom
Legs with support
Front or Back side
S&F Veneer (Teak wood Shed) for Top/ Front / back
S&F Veneer (Teak wood Shed) for side
Drg No.:- FD-20(M) FD-250 FD-280 Repairs to Chair Writing for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Chair Writing without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed.
Front leg
Rear leg
Front rail
Side/rear rail
Back rest (Back batten)
Arm rest
Short stiffener
Long stiffener
Drg No:- FD-16(M) FD-228 FD-279 Repairs to Chair Dining for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Chair Dining without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed.
Front leg
Rear leg
Front rail
Side rail
Rear rail
Back rest
Short Stiffener (side)
Long Stiffener (center)
Drg No:- FD-225 FD- 285 Repairs to Chair Wooden Bottom without arms for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Chair Wooden Bottom without arms without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed.
Seat of chair wooden bottom made out of 6mm thick commercial plywood BWR type
Front leg
Rrear leg
Front rail
Side rail
Rear rail
Back rest
Short Stiffener (side)
Long Stiffener (center)
Drg No. :- FD/MAP-II/05 Repairs to Chair Dining ORs for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Chair Dining ORs without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed.
Front leg
Rear leg
Front rail
Side rail
Rear rail
Back rest
Short Stiffener (side)
Long Stiffener (center)
Removing of old unsv PVC sheet from chairs dining and replacing the same with new 2 mm wide half round (oval shape) white plastic cane,weaving,in Godrej pattern with 4mm wide for side border after preptation suitable holes in all rails of seat of chair all as specified and directed by Engr-in-Charge.(Make:Maharashtra Cane/shah/premier)
Drg No. :- FD/MAP-II/04 Repairs to Chair Dining Cushioned (Offr) for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Chair Dining Cushioned (Offr) without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed.
Front leg
Rear leg
Front rail
Side rail
Rear rail
Back rest
Short Stiffener
Long Stiffener
Removing of old unsv Cushion from chairs dining Cushion and S&F new approved quality 75mm thick 40 density foam coverd with velvet/tapestry cloth not less then 400/- per meter as size and shape of seat existing chair dining cushion all as specified and directed by Engr-in-Charge.(Make:Sleepwell/ Curlon/Dunlop)
Removing of old unsv Cushion with plywood from chairs dining Cushion and S&F new approved quality 75mm thick 40 density foam coverd with velvet/tapestry cloth not less then 400/- per meter incl 12mm plywood as size and shape of seat existing chair dining cushion all as specified and directed by Engr-in-Charge.(Make:Sleepwell/ Curlon/Dunlop)
Drg No.:- FD-17(M), FD-229 Repairs to Chair Easy for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Chair Easy without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed.
Front / Rear leg
Arm rest
Side rail of seat
Rear rail of seat
Front rail of seat
Side rail of back
Upper rail of back
Bottom rail of back
Bottom stiffener of Back
Bottom stiffener front
Repairs to Drassing Gents (MAP) with Mirror for the following :- Removing old u/s fitting /Fixture of Drassing Gents (MAP) with Mirror without disturbing to the other parts and supply and fixing with new items and 5mm thick wooden beading whereever required and minor repair applying two coats of French Polish all complete specified shown on drawing & directed.
Top of 12 mm Pre laminated Particle Board
Bottom of 12 mm Pre laminated Particle Board
side of 12 mm Pre laminated Particle Board
Back of 12 mm Pre laminated Particle Board with two key plate
Mirror 5 mm thick of size 760x360mm with 6mm thick plywood
Mirror 5 mm thick size 760x360mm
Glass Shelve with side beading
Repairs to Charpoy Wooden plytop(FD-227) for the following :- Removing of old existing u/s plywood from charpoy Wooden , tightening the frame including minor repair required and S&F new ply wood 12 mm thick BWR, ISI marked with fix with screws all as spacified and directed. Make of Plywood : Kitply / National Plywood / Greenply / Century Ply/ Archidply
Drg No:- FD-233 Repairs to Hat stand with mirror for the following :- Removing old u/s fitting/fixture of Hat stand with mirror without disturbing to the other parts and supply and fixing with new items of best quality and minor repair applying two coats of French Polish All complete specified shown on drawing and directed.
Complete Base of 18 mm thick Pre-laminated particle board with one side teak finish fixed with 5mm thick timber beading around the edging.
Chromium plated metal peg 100 mm long
Mirror 5 mm thick electro copper plated with suitable beading
Drg No:- FD-277 FD-25(M) FD-236 Repairs to Peg table for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Peg Table without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed.
Top of 18/19 mm thick Prelaminated Particle Board Exterior Grade, prelaminated with decorative choice alongwith 5mm thick , first class hard wood, weading. Make:- Kitply,/ Bhutan board / Ecoboard / Archid Lam / Century Lam
Long Rail
Short Rail
Short stiffener
Long stiffener
Drg No. :- FD-282/252/27(M) Repairs to Stool Dressing CB for the following :- Dismantiling and taking out carefully the following unsv damage parts /fitting / fixture of Stool Dressing CB without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality,well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all specified shown on drawing and directed.
Long rails
Short rail
Stiffiners
Drg No:- FD-241 Repairs to Side board for the following:- Removing old u/s fitting /fixture of side board without disturbing to the other parts and supply and fixing with new items and 5mm thick wooden beading whereever required and minor repair applying two coats of French Polish all complete specified shown on drawing and directed.
Top of 18 mm Pre laminated Particle Board
Side of 18 mm Pre laminated Particle Board
Back of 6 mm thick plywood BWR Grade
Shutter made of 18mm Pre laminated Particle Board with piano type hinges and teakwood shad knob 25mm dia .
Shelve made of 18mm Pre laminated Particle Board
Drawers made of 18mm Pre laminated Particle Board with one knob 25 mm
Bottom of 18mm Pre laminated Particle Board
S&F new teakwood shaded knob 25mm dia
Long rail of Bottom of1st class teak wood
Short rail of Bottom of1st class teak wood
Legs of 1st class teak wood
S&F Veneer (Teak wood Shed) for Top
S&F Veneer (Teak wood Shed) for side
S&F Veneer (Teak wood Shed) for shutter
S&F Veneer (Teak wood Shed) for Drawer
Drg No:- FD-281/373 Repairs to Sofa Chair (Single seater) for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Sofa Chair (Single Seater) with and witout drawer without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed.
Arm rest
Bottom and upper rails for seat & back frame
Side Rails for seat and back frame
Complete Seat Plywood 12mm thick
Complete back Plywood 12mm thick
Supply & Fix New high density foam of size 530x560x100mm of density 40 duly coverred with tapestry cloth of approved quality and shown on drgs. Note - Tapastry cloth shall be of approved / good quality, shade and colour as approved by the GE and rate shall not be less than Rs. 300/-meter). The unit rate quoted shall be deemed to include the cost of tapestry cloth. Make - Sleepwell / Kurlon, Dunlop)
Supply & Fix New, Tapestry cloth for foam of size 530x560x100mm duly coverred with tapestry cloth of approved quality by providing best quality plastic Zip over Tapestry cloth complete and shown on drgs (Note - Tapastry cloth shall be of approved / good quality, shade and colour as approved by the GE and rate shall not be less than Rs. 300/-meter). (Note - Tapastry cloth shall be of shade and colour as approved by the GE).
Drg No.:- FD-281/373 Repairs to Sofa Three Seater for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Sofa Three Seater with and witout drawer without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed.
Arm rest
Bottom and upper rails for seat & back frame
Side Rails for seat and back frame
Complete Seat Plywood 12mm thick
Complete back Plywood 12mm thick
Drg No.:- (FD/MAP-II/07) Repairs to Table Drassing Ladies (MAP) for the following :- Removing old u/s fitting /Fixture of Table drassing Ladies MAP without disturbing to the other parts and supply and fixing with new items and 5mm thick wooden beading whereever required and minor repair applying two coats of French Polish all complete specified shown on drawing & directed.
Shutter of 18/19mm thick Prelaminated particle board extirior grade including teak wood edge all around.
Chromium plated C shape Handle.
Mirror 5-6 mm thick.
Mirror 5-6mm thick, alongwith Complete frame.
Drg No. :- FD-32(M)/ FD-251 Repairs to Table Drassing Ladies for the following :- Removing old u/s fitting /Fixture of Table drassing Ladies without disturbing to the other parts and supply and fixing with new items and 5mm thick wooden beading whereever required and minor repair applying two coats of French Polish all complete specified shown on drawing & directed.
Top of 18/19mm thick Prelaminated particle board extirior grade including teak wood edge all around,
Bottom of 18/19mm thick Prelaminated particle board extirior grade including teak wood edge all around
Side of 18/19mm thick Prelaminated particle board extirior grade including teak wood edge all around
Back of 12mm thick commercial ply
Drawer with Knob 25 mm
Sliding glass shutter
Leg made out of well seasoned first class hard wood, teak wood, including french polishing,glossy finish,
Long Rail made out of first class hard wood, teak wood
Short Rail made out of well seasoned first class hard wood, teak wood
Mirror 5.5mm thick, 355mm, 1220mm high
Mirror 5.5mm thick, 355mm, 1220mm high alongwith Complete frame
Drg No. :- FD-31(M) FD-230 Repairs to Table Dressing Gents for the following :- Removing old u/s fitting /Fixture of Table drassing Gents without disturbing to the other parts and supply and fixing with new items and 5mm thick wooden beading whereever required and minor repair applying two coats of French Polish all complete specified shown on drawing & directed.
Top of 12 mm Pre laminated Particle Board
Bottom of 12 mm Pre laminated Particle Board
Side of 12 mm Pre laminated Particle Board
Back of 12 mm Pre laminated Particle Board
Drawer with 25 mm knob
S&F new teakwood shaded knob 25 mm dia
Mirror 5 mm thick with 6mm thick plywood back side with key plate
S & F Mirror 5 mm thick
Veneer (Teak wood Shade) for Top of Box
Veneer (Teak wood Shade) for side of Box
Veneer (Teak wood Shade) for Front side of Drawer
Drg No. :- FD-41(M), 224, 283, FD-42 (M) FD- 55 (M) FD- 231, FD-284) Repairs to Table 900 x 600 x 760 (Table 3'x2') with and without Drawer for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table 3'x2' with and witout drawer without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed.
Top of 18/19mm thick Prelaminated Particle Board Exterior Grade, prelaminated with decorative choice alongwith 5mm thick , first class hard wood, weading. Make:- Kitply,/ Bhutan board / Ecoboard / Archid Lam / Century Lam
Long Rail
Side rail
Short Stiffener
Long Stiffener
Bottom of Drawer 6mm thick commercial plywood.
Complete Drawer with 25 mm knob
Teakwood shaded Knob for drawer 25mm
S & F triangle HW Support for legs with rails of size 50 x 50 mm with screws
Drg No. :- DB-4120 Repairs to Table 900x 900x760 (Table 3'x3') for the following :- Dismantiling and taking out carefully the followingunsv damage parts /fitting / fixture of Table 3'x3' without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all specified shown on drawing .
Top of 18/19mm thick Prelaminated Particle Board Exterior Grade, prelaminated with decorative choice alongwith 5mm thick , first class hard wood, weading. Make:- Kitply,/ Bhutan board / Ecoboard / Archid Lam / Century Lam
Rails
Supply & fix triangle HW support for legs with rails of size 50 x 50 mm with screw
Drg No. :- FD/MAP-II/03 Repairs to Table Dining 4 person 1200x900x760 mm for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table Dining 4 Person without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed.
Top of 18/19 mm thick Prelaminated Particle Board Exterior Grade, prelaminated with decorative choice alongwith 5mm thick , first class hard wood, weading. Make:- Kitply,/ Bhutan board / Ecoboard / Archid Lam / Century Lam
Long Rail
Short Rail
Supply & fix triangle HW support for legs with rails of size 100 x 100 mm with screw
Drg No. :- FD-239, FD- 273 Repairs to Table Dining 6 person for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table Dining 6 Person without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed.
Top of 18/19 mm thick Prelaminated Particle Board Exterior Grade, prelaminated with decorative choice alongwith 5mm thick , first class hard wood, weading. Make:- Kitply,/ Bhutan board / Ecoboard / Archid Lam / Century Lam
Long Rail
Short Rail
Supply & fix triangle HW support for legs with rails of size 100 x 100 mm with screw
Drg No. :- FD-239, FD- 273 Repairs to Table Dining 8 person for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table Dining 8 Person without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed.
Top of 18/19 mm thick Prelaminated Particle Board Exterior Grade, prelaminated with decorative choice alongwith 5mm thick , first class hard wood, weading. Make:- Kitply,/ Bhutan board / Ecoboard / Archid Lam / Century Lam
Long Rail
Short Rail
Supply & fix triangle HW support for legs with rails of size 100 x 100 mm with screw
Drg No. :- DB-4120 Repairs to Table Office Clerk Wooden 1380 x 850 x 760 mm for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table Office Clerk Wooden without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed.
Top of 18/19mm thick Prelaminated Particle Board Exterior Grade, prelaminated with decorative choice alongwith 5mm thick , first class hard wood, weading. Make:- Kitply,/ Bhutan board / Ecoboard / Archid Lam / Century Lam
Long Rail
Short Rail
Short Stiffener
Long Stiffener
Bottom of drawer 6mm thick commercial plywood BWR type
Complete Drawer with 25 mm knob
Teakwood shaded Knob for drawer 25mm
Drg No. :- DB-4119 Repairs to Table Office Officer Wooden for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table Office Officer Wooden without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed.
Top of 18/19mm thick Prelaminated Particle Board Exterior Grade, prelaminated with decorative choice alongwith 5mm thick , first class hard wood, weading. Make:- Kitply,/ Bhutan board / Ecoboard / Archid Lam / Century Lam
Long Rail
Short Rail
Short Stiffener
Long Stiffener
Bottom of drawer 6mm thick commercial plywood BWR type
Complete Drawer with 25 mm knob
Teakwood sheded Knob for drawer 25mm
Drg No. :- FD-33(M), FD-275 Repairs to Table Writing for the following :- Dismantiling and taking out carefully the following unsv damage parts /fitting / fixture of Table Writing without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish complete specified shown on drawing and directed.
Top of 18/19mm thick Prelaminated Particle Board Exterior Grade, prelaminated with decorative choice alongwith 5mm thick , first class hard wood, weading. Make:- Kitply,/ Bhutan board / Ecoboard / Archid Lam / Century Lam
Long Rail
Short Rail
Short Stiffener
Long Stiffiner
Side of Box of 18/19 mm Pre laminated Particle Board
Bottom of box of 18/19 mm Pre laminated Particle Board
Shelve of box of 18/19 mm Pre laminated Particle Board
Shutter made of 18/19 mm Pre laminated Particle Board with piano type hinges and teakwood shad knob 25mm dia
Complete Drawer with 25 mm knob
Back of box of 6mm plywood
Brass Lock for drawer with duplicate keys
Teakwood shaded Knob for drawer 25mm
Supply and fixing Veneer 1mm thick (Teak wood Shade) for shutter of Box
Supply and fixing Veneer 1mm thick (Teak wood Shade) for side of Box
Drg No. :- FD-29(M) FD- 235 FD-274 Repairs to Teapoy for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Teapoy without disturbing to the other parts and supply and refixing with new items of appropriate size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed.
Top of 18/19 mm thick Prelaminated Particle Board Exterior Grade, prelaminated with decorative choice alongwith 5mm thick , first class hard wood, weading. Make:- Kitply,/ Bhutan board / Ecoboard / Archid Lam / Century Lam
Long Rail
Short Rail
Drg No. :- FD-29(M) FD- 235 FD-274 Repairs to Table Centre for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table Centre without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, well seasoned 1st class hard wood and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed.
Top of 18/19 mm thick Prelaminated Particle Board Exterior Grade, prelaminated with decorative choice alongwith 5mm thick , first class hard wood, weading. Make:- Kitply,/ Bhutan board / Ecoboard / Archid Lam / Century Lam
Long Rail
Short Rail
Short stiffener
Long stiffener
Drg No. :- FD-28, FD-248, FD-276 Repairs to Table Bed side for the following :- Dismantiling and taking out carefully the following unserviceable damage parts /fitting / fixture of Table Bed Side without disturbing to the other parts and supply and refixing with new items of approprite size & shape of best quality, 18/19mm thick Prelaminated particle board extirior grade lamination with 4 mm thick teak wood edging and minor repair applying two coats of french polish all around glossy finish all complete specified shown on drawing and directed.
Bottom
Shelve
Back of 6mm thick plywood
Veener (teakwood shade) for top
Veener (teakwood shade) for side
Veener (teakwood shade) for Shelve
Removing of old PVC shoe from various Type of Tables such as Table Writing, table 3'x2' with /witout drawer,Table 3'x3' , table 2'x2' Table office Clerk, table dining 4/6/8 person, Sofa etc. and replacing the same with new 25mm dia and 20 mm high be screwed to bottom of legs all as specified and as directed.
Removing of old PVC shoe from various Type of Chairs such as Chair dining, Chair Writing, Chair Easy, Chair WB,Chaier CB etc. and replacing the same with new 20 mm dia and 10 mm high be screwed to bottom of legs all as specified an das directed.
Material & Labour for preparing & polishing of new or old wooden and wood based materials of any description and of any length and width and applying french polish to furniture articles as specified with one or more coat till glossy finish achieved All as specified in particular specifications and as shown on drawing and as directed by EIC for the following wooden furniture:- Make of Polish : Sheenlac/ Naidu / Asian/ Shalimar.
Almirah Mesh Utensil
Bed Hard Ply Wood Top
Book Case
Bin Soil Linen
Chair dining
Chair Dining ORs
Chair Dining Cushion Offr
Chair Easy
Chair wooden bottom with out Arm
Chair Writing
Charpoy Wooden
Dressing Table Gents with Mirror
Hat stand w/miror ( Drg No. FD-233 )
Peg table ( Drg No. :- FD-25(M) FD-236 FD-277 )
Rack wooden 3/4 spaces ( Drg No. :- DB-4123 )
Side board ( Drg No. :- FD-26(M) FD-241 )
Sofa Chair single seater ( Drg No. :- FD-281 )
Sofa Three seater ( Drg No. :- FD-281 )
Stool dressing CB ( Drg No. :- FD-282,FD-252,FD-27(M) )
Table 900X600X760mm (3' x 2') with drawer.(Drg No. :- FD-41(M) FD-224 FD-283)
Table 900X600X760mm (3'x2') without drawer.(Drg No. :- FD-42(M) FD-284 FD-55(M))
Table 900X900X760mm (3' x3') ( Drg No. :- FD-88(M) FD-291)
Table bed side ( Drg No. :- FD-28 FD-248 FD-276 )
Table center ( Drg No. :- FD-235 FD-274 )
Table dining 4 person ( Drg No. :- FD/MAP-II/03 )
Table dining 6 person ( Drg No. :- FD-239,FD-273 )
Table dining 8 person ( Drg No. :- FD-239,FD-273 )
Table dressing gents ( Drg No. :- FD-31(M) ,FD-230 )
Table dressing ladies Map
Table dressing ladies ( Drg No. :- FD-32(M) FD-251 )
Table office clerk ( Drg No. :- DB-4120 )
Table Office Officer
Table writing/table writing medium/table office writing medium. ( Drg No. :- DB-3958 FD-249 FD-275 FD-33(M) )
Teapoy ( Drg No. :- FD-34(M) FD-278,FD-232 )
Drg No. :- FD-15(M), FD-16(M), FD-17(M), FD-20(M), FD-27(M),FD- 252, FD244,250, 228,229 279 & 280 Recanning of Various Type of Chairs Removing of old cane from various chairs such as Chair dining, chair writing, chair easy,chair CB office , chair Tubular Steel,stool dressing CB etc.and replacing the same with new 2mm wide half round (oval shape) white plastic cane,weaving,in Godrej pattern with 4mm wide for side border all as specified. (Make : Maharashtra Cane/Shah/Premier/Super/JK)
M/S. CHAKRABORTY ENTERPRISE (BID ID -3509123)
M/S NEHAL ENTERPRISES (BID ID -3508233)
PUNAM ENTERPRISE (BID ID -3509589)
CONSTRUCTION AND MAINTENANCE ENGINEERING CORPORATION (BID ID -3508240)
P N GUPTA AND SONS (BID ID -3508378)
KIRAN TRADERS (BID ID -3508764)
TAMALIKA ENTERPRISE (BID ID -3508695)
TIMBA (BID ID -3509490)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
BOQ_832253.xls
BOQ • 0.55 MB
TENDERDOCUMENT.pdf
Tender Documents • 0.90 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .