Construction of Residential hostel building at Chipilima H.S under Dhanlkouda Block

EARTH WORK

Earth work in excavation of foundation trenches in ordinary soil except sheet rock and boulders (requiring blasting) including dressing and leveling the bed upto the required depth and depositing the excavated materials away form the site with all leads and lifts. T & P shoring and shuttering if required etc. complete as directed by engineer- in charge.

SAND FILLING

Supplying and filling in foundation and ditches with sand well watered and rammed in layers not exceeding 23 cm in depth with all lead and lift including cost, conveyance, loading and unloading , royalties and taxes of all materials and cost of all labour, sundries. T & P required for the work etc complete in all respect as per direction of Engineer incharge.

CONCRETE WORK P.C.C (1:3:6)

Providing & laying plain cement concrete 1:3:6( 1 cement 4 coarse and 8 graded stone aggregate fo 40 mm nominal size) in foundation and pinth including cost of hoisting, lowering laying concrete, ramming , watering and curing etc. complete to required levels laid in layers not exceeding 15cm thick including cost. Conveyance, loading and unloading, royalties and taxes all materials and cost of all labours, sundnes, T & P required for the work complete including dewatering if required as epr instruciton of Engineer-in- charge.

R.C.C. WORK

i. Providing , lifting hoisting laying Reinforced cement concrete of M20 grade in column footings , as per approved designs and drawings having a munimum compressive strength ( in work test) 200 Kg./ Square cm in 15cm. Cubes at 28 days after mixing and tests conducted in accordance with I.S. 416 using 12mm to 20 mm size black hard crusher broken granite stone ships of approved quality from approved quarry washed and cleaned (20mm size not to exceeds 25%) to be mixed in concrete mixture with ordinary protland cement (OPC) including noisting, lowering lying an dcompacting concrete by susing vibrators, watering and curing for 28 days centering and shuttering and finishing the exposed surface smooth proving grooves or beads wherever necessary including cost conveyance, loading and unloading royalities and taxes of all materials and cost of all labours sunones , T & P required fo rthe work ect complete in all respect excluding cost and conveyance of HYSD/MS steel and binding wires , and labour charges for straightaining, cutting , bending etc of M.S. rods of for steel and binding .

a. Column Footing

b. column upto pinth

c. Plinth beam

REINFORCEMENT

Cold twisted steel reinforcemtn for RCC work including cutting bendingstragntening and binding with 18swg black annealed wire and placing in posting complete.

Fly Ash brick masonry (1:6) cement mortar

Fly Ash brick masonay in cemnet mortar of (1.6) with portland slag cement , watering and curing etc. including cost, conveyance, loading and unloading, royalities and taxes of all materials and cost of all lbaour sundries T& P required for the works etc complete in all respect as directed by the Enginner -in-charge.

RCC. WORK

i. Providing, lifting, hoisting laying Reinforced cement concrete of M20grade in column footings s per approved designs and drawings having a minimum compressive strength ( in work test) 200 kg/Square cm. in 15 cm cubes at 28 days afterr mixing and tests conducted in accordance with I.S. 416 using 12 mm to 20 mm size black hard crusher broken grantie stone chips of approved quality from approved quarry washed and cleaned (20 mm size not to exceeds 25%) to be mixed in concrete mixure with ordinary portland cement (OPC) includin ghosting, lowering, lying and compacting concrete by using vibrators, watering andcuring for 28 days centering and shuttering and finishing the xposed surface mooth providing grooves of beads wherever necessary including cost. conveyance, loading and unloading , royaliies and teaxes of all materials and cost of all labours , sundries , T &P, required for the work etc. complete in all respect excluding cost and conveyance of HYSD/Ms steel and binding wires and labour charges for straihtaining, cutting, bending etc. of M.S rods of for steel and binding wires and lying the grils and placing in poper postion.

a. Column

b. Lintel Band

c. Roof beam

d.Chhajja

e.Roof Slab

f. Staircase

REINFORCEMENT

i. Cold twisted steel reinforcement for RCC work including cutting bending straihtening and binding with 18swg black annealed wire and placing in position complete

BRICK WORK IN SUPER STRUCTURE

Well burnt first class brick masonry using Fly Ash bricks having crushing strength not less than 75 kg per squr.cm. in cement mortar of (1:6) with portland slag cement after immersing the bricks for 6 (six) hours in water before use in superstructure similar such type of works with all necessary projections, watering and curing etc. including cost, conveyance, loading and unloading, royalitioes and taxes of all materials and cost of all labour, sundries, T & P required for the works etc complete in all respect as directed by the Engineer-in-charge.

i. 250 mm th brick v. all

ii. 125 mm thick brick wall with 1:4 cement mortar

FINISHING

Providing and laying cement plaster on surface after cleaning the surface taking out point including cost of all materials labour cuting taxes etc complete as per instruction fo architect/ Engineer incharge.

i. 12 mm cement plaster 1.6 to out side surface

ii. 16mm cement plaster 1.6 over brick work to inside walls.

iii. 6mm cp 1:4 over concrete surface

Inside , outside & ceiling cements paints

Wall painting two coats with 100% acrylic emulsion paint(1st quality) exterior grade of approved make and shade manufactured by reputed manufacture like nerolac/Asian/Berger/Dulax or equivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and stagging charges including cost,conveyance,taxes of all materials,cost of all labour T&P sundries etc, as required for the work. (for out side)

Finishign walls with water proofing cement paint of approved shade on new work 2 coats to give an even shade inclduing cost of brushes and putty inclduing cost of paint( per one Sq. Mtr)(for inside)

b. Providing and painting two coats of synthetic enamel paints over a coat of primer to steel work including sand papering, scaffolding , cost of conveyance, taxes of all materials. T & P labour required to complete the work as per design/ drawing & instruction of Architect/ Engineer-in- charge.

GRADING PLASTER

FLOORING

Fixing tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment o match the shades of the tiles including rubbing and polishing complete excluding cost of precast TILES.

( Doors/ Widndows)

a. Providng and fixing of FRP (PVC)door including frame and all necessary accessories such as tower blot, handles, hinges etc complete in all respects.

b. Providing and fixing Iron Door Shutters with Angle Iron Frames including fixing of Hold Fasts, Aldrops, Hinges etc. all complete including fixing with C.C. (1:2:4) complete.

c. Providing and fixing Iron Window Shutters with Angle Iron Frames and Grill including fixing of Hold Fasts, Aldrops, Hinges etc. all complete including fixing with C.C. (1:2:4) complete.

d. Providing and fixing Iron Window Grill including fixing etc. all complete

Supplying, fitting and fixing of stainless steel of 304 grade in hand railling using 50mm dia of 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T & P etc required for the work complete in all respect. (Data for 3.26 sqm.)

Fixing tiles in dados skrting on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tile.

Fixing chequred tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment o match the shades of the tiles including rubbing and polishing complete excluding cost of precast TILES.

Fixing of Granite floor for kitchen platform

Cup board & Shoo Rack

Boundary Wall along with Watchman Room

RCC. WORK

i. Providing, lifting, hoisting laying Reinforced cement concrete of M20grade in column footings s per approved designs and drawings having a minimum compressive strength ( in work test) 200 kg/Square cm. in 15 cm cubes at 28 days afterr mixing and tests conducted in accordance with I.S. 416 using 12 mm to 20 mm size black hard crusher broken grantie stone chips of approved quality from approved quarry washed and cleaned (20 mm size not to exceeds 25%) to be mixed in concrete mixure with ordinary portland cement (OPC) includin ghosting, lowering, lying and compacting concrete by using vibrators, watering andcuring for 28 days centering and shuttering and finishing the xposed surface mooth providing grooves of beads wherever necessary including cost. conveyance, loading and unloading , royaliies and teaxes of all materials and cost of all labours , sundries , T &P, required for the work etc. complete in all respect excluding cost and conveyance of HYSD/Ms steel and binding wires and labour charges for straihtaining, cutting, bending etc. of M.S rods of for steel and binding wires and lying the grils and placing in poper postion.

a. Column

b. Lintel Band

c. Roof beam

d.Chhajja

e.Roof Slab

f. Staicase

REINFORCEMENT

i. Cold twisted steel reinforcement for RCC work including cutting bending straihtening and binding with 18swg black annealed wire and placing in position complete

BRICK WORK IN SUPER STRUCTURE

Well burnt first class brick masonry using KB bricks having crushing strength not less than 75 kg per squr.cm. in cement mortar of (1:4)1:6) with portland slag cement after immersing the bricks for 6 (six) hours in water before use in superstructure similar such type of works with all necessary projections, watering and curing etc. including cost, conveyance, loading and unloading, royalitioes and taxes of all materials and cost of all labour, sundries, T & P required for the works etc complete in all respect as directed by the Engineer-in-charge.

i. 250 mm th brick v. all

ii. 125 mm thick brick wall with 1:4 cement mortar

FINISHING

Providing and laying cement plaster on surface after cleaning the surface taking out point including cost of all materials labour cuting taxes etc complete as per instruction fo architect/ Engineer incharge

i. 12 mm cement plaster 1.6 to out side surface

ii. 16mm cement plaster 1.6 over brick work to inside walls.

iii. 6mm cp 1:4 over concrete surface

FLOORING

Fixing tiles in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment o match the shades of the tiles including rubbing and polishing complete excluding cost of precast TILES.

b. supplying and fixing cement plaster with punning& painting to skirting of CM ( 1:4) including cost of meterial labour all complete.

WOOD WORK ( Doors/ Widndows)

c. Providng and fixing of FRP(PVC) door including frame and all necessary accessories such as tower blot, handles, hinges etc complete in all respects.

b. Providing and fixing Iron Door Shutters with Angle Iron Frames including fixing of Hold Fasts, Aldrops, Hinges etc. all complete including fixing with C.C. (1:2:4) complete.

c. Providing and fixing Iron Window Shutters with Angle Iron Frames and Grill including fixing of Hold Fasts, Aldrops, Hinges etc. all complete including fixing with C.C. (1:2:4) complete.

d. Providing and fixing Iron Window Grill including fixing etc. all complete

Supplying, fitting and fixing of stainless steel of 304 grade in hand railling using 50mm dia of 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T & P etc required for the work complete in all respect. (Data for 3.26 sqm.)

PAINTING

Wall painting two coats with 100% acrylic emulsion paint(1st quality) exterior grade of approved make and shade manufactured by reputed manufacture like nerolac/Asian/Berger/Dulax or equivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and stagging charges including cost,conveyance,taxes of all materials,cost of all labour T&P sundries etc, as required for the work.(Out side)

a. providing painting two coat of cement paints of approved shade to walls and ceiling surface includng all taxes cost of labour etc. complete as epr drawing , design and insruction of EIC.(In side)

b. Providing and painting two coats of synthetic enamel paints over a coat of primer to steel work including sand papering, scaffolding , cost of conveyance, taxes of all materials. T & P labour required to complete the work as per design/ drawing & instruction of Architect/ Engineer-in- charge.

Fixing tiles in dados skrting on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tile.

Rain water down pipe including fitting fixing cost of 100mm pipe and bend etc

Cup board & Shoo Rack

RCC. WORK

i. Providing, lifting, hoisting laying Reinforced cement concrete of M20grade in column footings s per approved designs and drawings having a minimum compressive strength ( in work test) 200 kg/Square cm. in 15 cm cubes at 28 days afterr mixing and tests conducted in accordance with I.S. 416 using 12 mm to 20 mm size black hard crusher broken grantie stone chips of approved quality from approved quarry washed and cleaned (20 mm size not to exceeds 25%) to be mixed in concrete mixure with ordinary portland cement (OPC) includin ghosting, lowering, lying and compacting concrete by using vibrators, watering andcuring for 28 days centering and shuttering and finishing the xposed surface mooth providing grooves of beads wherever necessary including cost. conveyance, loading and unloading , royaliies and teaxes of all materials and cost of all labours , sundries , T &P, required for the work etc. complete in all respect excluding cost and conveyance of HYSD/Ms steel and binding wires and labour charges for straihtaining, cutting, bending etc. of M.S rods of for steel and binding wires and lying the grils and placing in poper postion.

a. Column

c. Roof beam

d.Chhajja

e.Roof Slab

REINFORCEMENT

i. Cold twisted steel reinforcement for RCC work including cutting bending straihtening and binding with 18swg black annealed wire and placing in position complete

BRICK WORK IN SUPER STRUCTURE

Well burnt first class brick masonry using KB bricks having crushing strength not less than 75 kg per squr.cm. in cement mortar of (1:4)1:6) with portland slag cement after immersing the bricks for 6 (six) hours in water before use in superstructure similar such type of works with all necessary projections, watering and curing etc. including cost, conveyance, loading and unloading, royalitioes and taxes of all materials and cost of all labour, sundries, T & P required for the works etc complete in all respect as directed by the Engineer-in-charge.

i. 250 mm th brick v. all

FINISHING

Providing and laying cement plaster on surface after cleaning the surface taking out point including cost of all materials labour cuting taxes etc complete as per instruction fo architect/ Engineer incharge

i. 12 mm cement plaster 1.6 to out side surface

ii. 16mm cement plaster 1.6 over brick work to inside walls.

iii. 6mm cp 1:4 over concrete surface

WOOD WORK ( Doors/ Widndows)

b. Providing and fixing Iron Door Shutters with Angle Iron Frames including fixing of Hold Fasts, Aldrops, Hinges etc. all complete including fixing with C.C. (1:2:4) complete.

d. Providing and fixing Iron Window Grill including fixing etc. all complete

PAINTING

a. providing painting two coat of cement paints of approved shade to walls and ceiling surface includng all taxes cost of labour etc. complete as epr drawing , design and insruction of EIC.(In side)

b. Providing and painting two coats of synthetic enamel paints over a coat of primer to steel work including sand papering, scaffolding , cost of conveyance, taxes of all materials. T & P labour required to complete the work as per design/ drawing & instruction of Architect/ Engineer-in- charge.

TOILET FIXTURES

Supplying , fitting , fixing of water closet of CERA make 2073 Orissa Pan(Cello) of size 510 x 400 mm or equivalent of Parryware/ Hindware , duly embedded in cement concrete(1:3:6) using 12mm size b.h.g chips all complete with materials , albour and T& P etc.

Supplying , fitting , fixing of porcelein wash hand basin of size 450mm x 350 mm of CERA make, catalogue no Canon 1012 Wash Basin of Equivalent of Parryware/ Hindware with rog bolts, CI brackets, hole for pillar cock with cast iron/ M.S. brackets painted while including cutting holes in wall and making good to the damages etc. all complete with materials , labour and T& P etc.

Supply , fitting , fixing of ( 500 x 450 mm) bevelled edge mirror of superior glass mounted on 6 mm thk A.C. sheet or ply-wood sheet and fixed to wooden plugs with cromium plated brass screws and washers etc. all complete with materials , labour and T & P etc.

Supply, fitting , fixing of Stain Less Steel Kitchen sink with cast iron/ M.S brackets painted while including cutting holes in walls and making good to the damages etc. all complete wit materials labour and T& P etc.

Providing and fixing PVC soil waste and vent pipes

(i) 110 mm dia .

Supplying fitting , fixing of PVC floor traps of the following norminal diameter of outlet of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm including cutting holes in walls and making good to the damages etc. all complete with materials, labour and T& P etc.

Providing and fixing PVC plain bend of required degree

Providing and fixing PVC single equal plain junction of required degee with access door, insertion rubber washer 3mm thick, bolts and nuts complete .

(i) 1000x100x100mm

Providing and fixing door piece, insertion rubber washer 3mm thick , bolts & nuts complete .

Providing & fixing PVC terminal guard (i) 110 mm

Supplying, fitting, fixing to walls, ceiling and floor upplasticized PVC pipes conforming to I.S. 4985 of class IV ( 10 kg/ cm 2) th efollowing nominal diameter with fittings and clamps includings testing all complete with materials labour and T & P etc.

a) 15mm dia nominal bore

b) 20mm dia nominal bore

c) 25 mm dia nominal bore

d) 32 mm dia nominal bore

e) 40 mm dia nominal bore.

Providing and fioxing brass bib cock of approved quality .

(i) 15 mm nominal bore short body

(ii) 15mm nominal bore long body

Providing and fixing brass stop cock with wall flush of approved quality .

(i) 15 mm nominal bore.

Providing and fixing gun metal gate valve with C.I. wheel of approved qualioty ( screwed end)

(i) 25 mm dia Nominal bore

(ii) 32 mm dia Nominal bore

Supplying fiting , fixing of S.W. Gully trap Grade-A complete with cast iron grating, brick masonry chamber( 250 mm x 250 mm) with R.C.C cover slab as per P.H. specificaiton and design all complete with materials labour and T & P etc. (Excluding cost of gully trap and grating)

Supply all labour , materials and T & P and laying to level and slope and jointing with cement mortar(1:1) for PVC pipes . (Grade-A) of the following diametersas per specification al complete (excluding earth work in trenches)(data for 30 mtr.) (per mtr) S.W. Pipe 150mm dia.

Supplying all materials, labour and T & P for construction of inspection chamber as per P.H. specification and design all ocmplete ( per each)

Supplying, fitting fixing or constructing of 1.20 mtr dia x 2.55 mtr.Deepsoak-way pit with dry brick walling up to2.10mtr. Height and brick work with cment mortar(1:6) for 0.45mtr height of wall at top, cement plaste(1:3)inside and ouside, inside filled with dry brick khoa of 50mm to 100 mm size to a height of 2.00 mtr form bottom. covered by means of 40mm thick R.C.C perforated slat 50 mm thick RCC. Well cover in pieces fitted with iron rings including earth work in excavation and refiling of cavity around the pit etc all complete as per approved design and drawing ( Per each)

Providing and placing on terrance (at all floor levels) per liter polyethylene water storage tank ISI:12701 marked capacite indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for intel, outlet and overflow pipes but without fittings and the base support for tank ( sintex, Electroplast, star Lots of equivalent having valid ISI license)

Add for Fire Fighting Equipment (L/S)

SEPTIC TANK

Earth work in all kinds of hard soil within 50mtrs initial lead and 1.5 mtrs intial lift including rough dressing and leveling the bed and breaking clods to maximum 5cm to 7 cm and laying in layers not exceeding 0.3mtrs depth and as per the direction of the Engineer -in-charge.

Providing and laying plain cement concrete 1:4:8 in foundation and bottom layers of the lank using 40mm size black hare crusher broken ganite metal of conveyance , royality , all taxes complete and providing to proper thickness. Watering and curing for the requied period as per direction fo Engineer- in Charge.

Providing plain cement concrete 1:3:6 with 25 mm size hard black granite crusher broken metal of approved quality from the approved quarry including all labour and T& P for mixing, lifting, lowering, laying and compacting to proper shape & size and finishing the exposed surface smooth with neat cement punning including the cost of scaffolding watering and curing for the required period as per the direction fo Enginer-in charge including cost, conveyance royality, taxes etc of all the materials and labour complete

Brick (230 mm size) masonary work using CB. Bricks having crushing strength between 75 kg to 99 kg/ sqcm. In cement mortar(1:6) duly immersing the bricks for minimum period of six hours in water before use in foundaiton and plinth including cost, conveyance taxes, royalitites, laoding and unloading of all materials and labour and scaffolding , wateirng, curing T& P etc. complete as per the direction fo the Engineer - in charge.

Providign , lifting hoisting and laying reinforced cement concrete (1:1.5:3) with 20 mm crusher broken black H.g. graded chips of approved quality from approved quarry including mixing and compacting to proper shape & size and finishing th eexposed surface smooth with scaffolding , watering and curing for the required period as per the direction of the Engineer- in- charge including all materials cos,t conveyancy, taxes royalities, loading unloading, labour T & P etc. all complete but excluding the cost of steel and centering / shuttering etc.

Providing fixing HYSD reinforcement bars for R.C.C. works of required diameter and approved qualioty with straightening, cutting to sizes bendign & binding, typing the grills and placing in position using binding wire( 18 to 20 gauge) including cost of all labour, material sunderes T & P scaffolding etc. all complete as per specificaiton and the direction of Engineer - in charge.

Providing thick cement plaster with cement mortar( 1:4) including cement punning finishing smooth over brick work of the septic tank with waterproofing cemen tbased compound of approved quality including laying finishign smooth to proper slope and plane as per the direction fo Engineer- in charge. including cost of all materials with conveyance, royality , taxes watering and curing all labour and T& P etc. complete.

a. 16mm thick

Providing lifting and fixing of 450 mm dia C.I. man hole cover with suitable frome with finished cost of all materisl, labours and T& P etc. complete as per the direction fo the Engineer- in charge.

Providing fitting and fioxing of 250 mm S.W tee with 250 mm dia RCC pipe at inlet and outlet of the septic tank inclusive of all labour , T& P sundries, fittings etc as per the direction fo the Engineer- in charge complete

Providing fixing and fitting CL step iron of approved qualty and size with three coats of anticorrosive paint at regular intervals inside the tank incuding cost, conveyance, taxes all comlete and as per the direction of the Engineer - in charge.

Providing and fixing of 50 mm dia HCL pipe and cowl form vent on the two part of the eptic tank including painting three coats with anticorrosive paint all cost, coveyance, taxes etc all complete as per the direction of the Engineer- in charge.

Add Overhead charges & Contractor Profit 15%

Add 1% extra for Labour Cess (Specific items only)

water purifier

Recessed wiring to Light Point / Fan Point / Exhaust Fan Point / Call Bell Point with 1.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5 Amp, 250 Volt piano type swich ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.0 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked as earth wire including all accesories and connection as per direction of engineer in charge. (Make of wire Finolex / L&T / Anchor / Hevels / V Guard)

a) Light point

Midium

Short

b) Celling fan point

Midium

Short

c) 5 A plug point

Recessed wiring for 15 / 16 Amp socket outlet with 2 X 4.00 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5 Amp, 250 Volt piano type swich ISI marked, Phenolic laminated sheet of suitable size ISI marked MS box and earthing point with 1 X 2.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor for loop earthing etc. as required, as per direction of engineer in charge. (Make of wire Finolex / L&T / Anchor / Hevels / V Guard)

Recessed wiring to Sub-Main in 2 X 2.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 20 mm dia non-metallic PVC heavy duty flexible conduit with 1.60 mm thick, along with 1 X 1.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor as earth wire as required as per direction of Engineer-in-Charge. (Make of wire Finolex / L&T / Anchor / Hevels / V Guard)

Recessed wiring to Sub-Main in 2 X 4.00 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 25 mm dia non-metallic PVC heavy duty flexible conduit with 1.60 mm thick, along with 1 X 2.50 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor as earth wire as required as per direction of Engineer-in-Charge. (Make of wire Finolex / L&T / Anchor / Hevels / V Guard)

Recessed wiring to Sub-Main in 2 X 10 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor of ISI marked with 25 mm dia non-metallic PVC heavy duty flexible conduit with 1.60 mm thick, along with 1 X 4 sq. mm FR PVC insulated Single Core Multi standard Copper Conductor as earth wire as required as per direction of Engineer-in-Charge. (Make of wire Finolex / L&T / Anchor / Hevels / V Guard)

Earthing with G.I earth pipe 3 mtr long 40 mm dia ISI mark including accessories and providing machinary enclosure with cover plate having locking arrengement and watering pipe etc. with charcol and salt etc.

Providing and fixing G.I tape 20 mm X 3 mm thick on parapet of surface of wall for lightning conductor complete as per direction of Engineer-in-charge.

Providing and fixing Copper tape 32 mm X 6 mm from earth electrode directly in ground as required.

Supply , fixing and fitting of 11 watt LED light ( make Philips / Bajaj/ Cromption or Equivalent)

Supply & fixing of single spot light of 18 watts complete with 1 no. 18 watt of approved make complete with all necessary fixing materials including termination & labour ( make:- Philips/ Bajaj/ Crompton of Equivalent)

Supply, installation, Testting and commissioni of celling fan 1200 mm sweep 230/250 volts , 50 Hz, complete with suitable, clamp, downrod, blades, connections with 1.5 sq. mm PVC insulated copper conductor cable et as required and fan hook made of 16mm M.S. rod in R.C.C roof complete with all accessories.

Providing and fixing Single Pole MCB with sheet steel enclosure, distribution board on surface / recess complete with tinned copper bus bar , neutral bus bar, earth bar, din bar, detachable gland plate inter connection phospate and powder painted including earthing etc. as per direction of Engineer-in-charge.

Supply, installation, testing and commissoning of 63amp TPN main switch of following capacity (IS 13940 part-3/19930 on existing surface / wall mounting and complete with HRC fuse links inter connections, earthing etc as per direction of Engineer-in-charge.9SEIMENS/HPL/ANCHOR/L&T/HAVELS/C&S/RK)

Add Overhead charges & Contractor Profit 15%

Labour Cess @ 1%

GST @18% extra

Please Enable Macros to View BoQ information