Providing 33 KV feeder line from 132 KV Sub-Station Nim Karori to 33/11 KV Sub-Station at I.A. Khimsepur Distt. Farrukhabad.

Supply & fixing of clamp suitable for securing channel & cross arm, with the hole made out of MS flat 50 x 6 mm including all bolts, washer, T & P and men & material complete in all respect as per SIDC Sch. No. 03.08

Supply & fixing of Staight MS Channel 100 x 50 mm (7.9 kg/M) 3.20 M long as per design for cross arm complete in all respect as per SIDC Sch. No. ER 04.1

Supply & sagging, tensioning, jointing & binding of two parallel length of GI No. 6 SWG along the span and GI no. 6 to 8 SWG wire across the span each at an interval of 5 M for cross lacing complete as per UPPWD sch. No. 629

Supply & fixing of earth wire clamp as per design suitable for fixing and binding earth wire made out of 50x6 mm MS flat including all bolts, nuts, washers. T & P, men and material for proper completion of work as per SIDC Sch. No. ER 13.02

Supply & burying of 40 mm dia x 4.5 mtr. Long G.I. pipe vertically for earth having 12 mm dia holes spaced 75 mm a part drilled upto 2 mtr. From the bottom complete with earthing lead of no. 6 to 8 SWG GI wire in G.I. pipe upto apron 30 smsq CI box with hinged cover massonnary enclosure, funnel of top, alternate layers of charcoal/coke and salt at least 150 mm thick alround etc. as per direction E/I as per UPPWD Sch. No. 701

Supply & erection of stay of HT lines for ST pole with GI anchor plate (152x152x6 mm) stay rod (16 mm dia x 1.85 m long ) GI stay bow (16 mm dia rod), thimble, double stay tightner, stay insulator clamps & stay wire (GS 7/3.15 mm) including grouting in 1:4:8 ratio of cement concrete using coarse sand, over burnt brick ballast as per direction of Engineer in charge per complete in all respect as pe UPSIDC Sch. No. 06.01

Supply & sagging, tensioning, jointing & binding of ACSR Dog conductor including cost of aluminium tap binding wire and jointing sleeves complete in all respect including men & material, T & P for proper completion of work as per direction of Engineer in charge as per SIDC Sch. No. 10.04

Supply & erection of overhead line with G.I. wire on poles including binding etc. complete in all respects as per direction of Engineer in charge as per SIDC Sch. No. 11.01

Painting of ST pole and all mountings on it with two coats of aluminium paints with an under coat of red oxide paint on length of above 10 M. Support above the ground level or as per direction of Engineer in charge of work/site including all T & P, men and material for proper completion of wor.k

Supply & fixing anticlimbing device fabricated from G.I. flat of 25 mm x 6 mm size in a shape of the pole size, having G.I. flat pointed fins of length 225 mm in 8 nos. and also barbed wire in 200 mm length above the said ring including material complete in all respect as per UPSIDC Sch. No. 26.1

Supply and fixing of danger board fabricated from 10 gauge M.S. sheet as per I.E. Rules as per SIDC Sch. No. 27.1

Supply and erection of steel tubular pole 410-SP-71, 13 M. long, 333 Kg. complete with 1/6th of overall length of pole in cement concrete with 30 cm dia cement plinth all round the pole and 30 cm above ground level. The foundation of underground will be of cement concrete in the ratio of 1:3:6 alround the pole. The brick ballast used will be of 1.25 cm (1.2 inch x 1 inch) size with stone pad 30 cm x 30 cm x 7.5 cm at the base, includes all materials complete as per SIDC Sch. No. NS 336

Supply & erection of Double pole structure consisting of 410-SP-71, 13 Mtr. Long S.T. pole including fittings and mounting. T & P, men & material for proper completion of work as per SIDC Sch. No. NS 337

Supply and erection of strut on consisting of 410-SP-71, 13 mtr. Long 333 Kg. complete with 1/6th of overall length of pole in cement concrete with 30 cm dia cement plinth all round the pole and 30 cm above ground level. The foundation of underground will be of cement concrete in the ratio of 1:3:6 alround the pole. The brick ballast used will be of 1.25 cm (1.2 inch x 1 inch) size with stone pad 30 cm x 30 cm x 7.5 cm at the base, includes all materials complete as per SIDC Sch. No. NS 339

Supply and laying of 300 sqmm 3 core standard aluminium conductor XLPE (cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 798 (Part II with latest amendments) 33 KV grade at a depth of 1000 mm below ground level in DWC pipe. The armouring of cable shall be properly connected with earth conductor by clamps etc. The Cable shall be approved make of MVVNL as per analysed rate. (Havell's, Polycab, Gloster,Grandlay, KEI make)

Supply and fixing of 150 mm dia GI pipe B Class for climbing up the cable from ground to over head line including all accessories material labour and T & P required for proper completion of work as per specification complete as per SIDC Sch. No. NS 341

Supply and fixing of 33 KV ordinary pole fitting make out of 125 x 65 x 6 mm MS channel (13.1 Kg/M) including pin insulator T & P, men & material for proper completion of work as per SIDC Sch. No. NS 341

Supply and fixing of Heat Shrinkable jointing kit suitable for 300 sq.mm 3 core 33 KV HT cable outdoor type including all materials, labour and T & P required for proper completion of work as per analysed rate. (Raychem, Birla 3 M make)

Supply and fixing of 33 KV pin with insulator or cross arms fixed on ST pole including all nuts, bolts, washers, T & P, men & material for proper completion of work as per SIDC Sch. No. NS 345

P/L MS steel pipe 200 mm dia (by trenchless method) made out of steel plate as per IS 2062 grade Fe-100 6mm thick made as per IS 3589 installation of pipe by boaring method the pipe will be laid at depth of 3 M as per direction of Engineer in charge as per

Providing, laying and fixing 160 mm dia DWC pipe in ground level complete with jointing with including trenching 120 cm deep and refilling etc.

Sully & fixing of 33 KV Disc fitting complete as per SIDC Sch. No. 4 A (7)

Supply and fixing of straight through joint of 33 KV suitable for 300 sq.mm 3 core XLPE (Raychem/Mahindra/Desion make) as per direction of site in charge.

Supply and fixing of cable route marker sanctioned ride Job No. ED-1(81) dt; 11.01.2021

Providing and fixing of precast reinforced cement concrete 1:1:5:3 (1 cement:1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) Kilometer stone as per standard design including finishing smooth in 1:3 cement mortar (1 cement:3 fine sand) but excluding the cost of earth work concrete in foundation painting and lettering etc. which shall be paid for separately 35x93.5x10 cm size.

Finishing with epoxy paint (two coat or more coat) at all location prepared and applied as per manufactures specifications including appropriate priming coat, preparation of surface etc. complete on concrete work.

Lettering with black Japan paint of approved brand and manufacturer.

Please Enable Macros to View BoQ information