Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.5 LAccepted-AOC UTARLAI KAWAS BARMER RAJASTHAN 344 001 | BARMER | RAJASTHAN | 344001 | L1 | Accepted-AOC AOC | |
| 2 | L2₹32.9 L+₹3.4 L (11.5%)Rejected-Finance 205 IIND PHASE INDUSTRIAL AREA BARMER 344001 | BARMER | BARMER | RAJASTHAN | 344001 | L2 | Rejected-Finance Other Lowest | |
| 3 | L3₹32.9 L+₹3.5 L (11.8%)Rejected-Finance 4 KHEME KA KUA PAL ROAD JODHPUR RAJASTHAN 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L3 | Rejected-Finance Other Lowest |
Tender Value
₹34.0 L
EMD Value
₹68,000
Closing Date
4 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Utarlai
GE (AF) Utarlai PB NO. 11 Barmer (Raj) 344001
PROVN OF TWO STORES AT OPS LOCATION AT AF STN UTARLAI
2022_MES_565578_1
8336/E8
Open Tender
Civil Works
Item Rate
180 days
Utarlai
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) Utarlai
₹68,000
Yes
22 Feb 2023
26 Nov 2022
11 Jan 2023
27 Nov 2022
4 Jan 2023
10 Dec 2022
Amount
Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed.
Excavation in trenches n exc 1.50 m wide and n exc 1.5 m in depth for foundation etc in hard dense soil and getting out complete all as specified and directed.
Excavation in trenches n exc 1.50 m wide and exc 1.5 m but n. exc. in depth for foundation etc in soft disintegrated rock and getting out complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removing Excavated material(soil) exc 500 m but n. exc 1500 m and where directed
Removing Excavated material(rocks) exc 500 m but n. exc 1500 m and where directed
M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete etc.complete all as specified and directed.
M&L for broken stone hard core of gauge n.exc 63mm deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for morrum/red bajri filling under floors or pavings,laid in layers n exc 15 cm thick each , spread,levelled and rammed including watering complete all as specified and directed.
M&L for 100 mm thick PCC (1:4:8) type D-2 using (40 mm graded stone aggregate) as in sub base complete all as specified and directed.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9 mm diameter complete all as specified and directed.
Ditto as per item No 11 but for 6 to 8 mm diameter in slab complete all as specified and directed.
Ditto as per item No 11 but for 5mm dia and over upto and including 10 mm diameter in stirrups, spacers and binders complete all as specified and directed.
Form work to sides of concrete foundations, footings, bases of columns and raft beams, side and soffits of foundation and plinth beams of rough finished surfaces of concrete complete all as specified and directed.
Formwork to sides of pillars, posts, struts, piers,columns, and stanchions Rough finished surfaces of concrete Square, rectangular or polygonal complete all as specified and directed.
Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat complete all as specified and directed.
Form work to soffits of suspended slabs, such as roof slab, floor slabs, landing and similar work, n.exc 200 mm thick complete all as specified and directed.
M&L for design mix RCC M-25 (using 20 mm graded stone aggregate) as in footing, foundation and plinth beams etc. complete all as specified and directed.
M&L for design mix RCC M-25 (using 20 mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for design mix RCC M-25 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressumers, lintels, over 1.50 m span etc complete all as specified and directed.
M&L for design mix RCC M-25 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors and roof ,roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed.
M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6 complete all as specified and directed.
M&L for precast cement concrete concrete solid block masonry in walls with solid blocks of PCC 1:3:6 type C1 using 20 mm graded stone aggregate, building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in cement mortar 1:4 complete all as specified and directed.
M&L for Anti termit treatment for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.
M&L for Anti termit treatment for Treating of backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface. (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.
M&L for Anti termit treatment for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.
M&L for Anti termit treatment for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.
M&L for Anti termit treatment for Treating the soil with external perimeter of building at the rate of 2.25 litre complete all as specified and directed.
M&L rendering 10 mm thick, in CM (1:6) on fair faces of block masonary or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.
M&L rendering 5 mm thick, in CM (1:3) on concrete surfaces in ceiling, finished even and smooth without using extra cement complete all as specified and directed.
M&L rendering 15 mm thick in two layer i.e. first layer 10mm thick in CM 1:6 and second layer 5mm thick in CM 1:4 on surface other than fair finish of brickwork/concrete/PCC block masonry wall or on stone masonry wall using liquid water proofing compound @ 3% by wt of cement mixed with in second/finish coat and finished even and smooth without using extra cement complete all as specified and directed. (Note : WPC will be measured & paid seperately)
Supply only liquid water proofing compound ISI marked.
M&L for Preparation of newly plastered surfaces of walls and applying two coats of oil bond distumper over a coat of primer complete all as specified and directed.
M&L for Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer etc complete all as specified and directed.
M&L for 75mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection finished even and fair without using extra cement complete all as specified and directed.
M&L for 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in sub base finished even and fair without using extra cement complete all as specified and directed.
M&L for20-25mm thick mirror polished machine cut Kota stone slab in flooring/shelves/window cill etc over & including 20mm thick cement screed bed or bedding layer in CM (1:6) complete all as specified and directed.
M&L for 15-20mm thick machine cut Kota stone as in skirting/ dado and pillar set over and incl 10mm thick rendering in cement mortar 1:4 and set and jointed with grey cement slurry mixed with pigments to match the shade including rubbing and polishing complete all as specified and directed.
M&L for framed work as in doors or gates angle or other covering door etc to be prepared for handing or sliding with including either hooks and hinges or steel hanging door fittings (exclusive of steel or other covering, running rails and guides) and hanging also fastening and fixing, conforming to FE-290 Gde E-165 complete all as specified and directed.
S&F steel window with Side hung shutter including box type frictional hinges with steel handles and steel peg stays complete with glazing bars dovetailed or welded complete all as specified and directed.
Ditto all as per Item No 41 above but without glazing bars.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S & F sheet glass 3.00 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square n.exc. 0.5 sqm in each pane complete all as specified and directed.
M&L for preparation of new steel surface of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
S&F frame work such as grills,grating etc,with ends of bars shouldered &/or riveted or forged into spikes,framed guard bars, barred iron door ladder,frame balusters,walk ways, railing,frame work or water tanks & Similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F factory made 1st class glazed and skelton door shutter made out of stiles & rails of 35mm thick 1st class hard wood, klin seasoned and chemically pressure treated & open reabted and prepared to receive glass/gauge etc (without sash bars), edges of framing plain,chamfered of rounded, fitted with and mitred beads for securing glass etc compelte, the SIze of members of shutter shall be as per IS-1003 complete all as specified and directed. (The shutter shall be fitted to the chowkhats as directed by Engr-in-Charge.)
S&F 35mm thick 2nd class hard wood factory made plain, framed,panelled shutter (two panel) with lock rail & panel of 9mm BWP commercial ply seasoned & chemically pressure treated/12mm veneered, particle board with commercial veneering on both faces. The Size of rail & steel as per IS : 1003 (Part I) kiln seasoned & chemically pressure treated complete all as specified and directed.
M&L for preparation of newly wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint (of approved shade) over a coat of pink primer complete all as specified and directed.
S&F mild steel butt hinges medium weight cold rolled of SIze 100mm, ISI marked complete all as specified and directed.
S&F MS sliding door bolt with hasp and staples type, 300mm long stove enamelled black with bright bolt not less than 12mm dia with and incl minimum of 06 bolts and nuts, 4 on plate and 2 on staple plate and fixed complete all as specified and directed.
S&F aluminuim handles fabricated type anodized of size 150 mm complete all as specifie and directed
S & F aluminium, anodised, barrel tower bolt of extruded section and fixed, 200mm long complete all as specified and directed.
S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,with vulcanised rubber piece.fixed in floor complete all as specified and directed.
M & L for rendering 10 mm thick in cement mortar 1:6 with liquid WPC @ 3 % by weight of cement on roof surface complete all as specified and directed. (NOTE : Liquid Water Proofing Compound shall be measured and paid separetely.)
M & L for APP modified membrane of 3mm thickness as roof treatment on top of roof (weighing 3 Kgs/persqm) with non-woven polyster reinforcement /mat (centre core) with thermal insulation with white mineral finish on upper side of membrane laid by torch application method with overlap 100 on length and 100 mm on the width as per manufacture's instructions over a coat of approved cold applied butuminous oil based primer (IS-3384) @ 250gm/sqm complete all as specified and directed by engineer-in-charge.
Excavation over area n.exc 1.50m deep and getting out including dressing of sides and bottom as in soft/loose soil complete all as specified and directed.
Excavation in trenches n exc 1.5 m wide & n exc 1.5 m depth; for foundation etc and getting out in soft/loose soil complete all as specified and directed.
M&L for rolling and consolidation formation surface of road in cutting using power roller of capacity exc. 8 tonne and n.exc. 12 tonne incl. filling in depression which occur during the process of the rolling complete all as specified and directed.
M&L pavement quality cement concrete work in pavement/hardstanding of flexural strength 40kg per sqm in field using 400kg of cement per cum thickness of concrete 25cm or less complete all as specified and directed.
M&L forming construction joints 10mm wide and 30mm deep and filled with sealing compound Grade 'B' complete all as specified and directed.
M&L forming contraction (dummy) joints 65mm deep and 10mm wide and filled with sealing compound Grade 'B' complete all as specified and directed.
M&L for providing and laying factory made kerb stone of M-25 grade, at or near ground level in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness, M-40 Grade with grey cement and pigment including 25mm thick sand cushioning complete all as specified and directed.
M&L for Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded FRLS flexible copper conductor cable in and incl rigid PVC conduit medium grade concealed with pressed mild steel terminal boxes duly painted with a coat of red oxide primer fixed flushed to the wall with 3mm thick plastic laminated sheet cover of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire to common earth dolly, including cutting chases in brick/block/stone masonry wall, replastering and making good to match the existing specifications complete all as specified and directed by Engr-in-charge. Note: a) Unit rate includes for cutting chases for conduits and sunken boxes and making good to wall, floors etc
S & F Socket out let flush type 5 pin suitable for 5 Amp plug top 230 V complete all as specified and directed.
3 S & F Switch Piano flush type 5 amp single Pole one way 230 V complete all as specified and directed.
S&F LED tube light fitting 1x20w,230v, including LED cylindrical poly-carbonate tube rod (4 feet) with in built driver with metal heat sink, double sided connection including 4 feet box type batten fitting fixtures, complete with all accessories internally pre-wired and including connecting up with two core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Crompton Cat Pt No. LT8-20-865-(2) (tube), DMLN1LT8-16 (batten) or equivalent in philips/Orient/Havells Note: The above item will consists of two items i.e (i) LED glass tube rod 20W (ii) Box type batten
S&F sheet metal enclosure MCB DB SPN 4 way with 200 amps rated bus bar 240 volts double door with magnetic locking system complete all as specified and directed.
S&F MCB, B curve, single pole, 240 volts, 6 Amps to 32 Amp breaking capacity 10KA complete all as specified and directed.
S&F MCB, B Curve, SPN, 240 Volts, 32 Amps breaking capacity 10 KA complete all as specified and directed.
Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
M&L for Earthing complete with galvanised steel earth plate electrode 60x60cm x 6mm thick, buried directly in ground (earth pit not Set less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.
M& L for bracket for streer light fitting made out of 40 mm bore pipe light grade Gl tube bent to shape required, fixed with and including MS flat iron clamps, bolts,nuts, washers duly painting the bracket with two coats of aluminium paint over a coat of zinc chrome primer complete all as specified and directed.
Supply install and testing outdoor wheather proof bus bar chamber of size 120 cm x 40 cm x40 cm made out of 18 SWG MS sheet having one side openable hinged door shutter with locking arrangement mounted on 40 x 40x 6 mm angle iron frame with legs welded and 04 Nos aluminium bus bar of 200 Amp rating complete erected on ground with necessary PCC 1:3:6 type C2 foundation complete bus bar chmber painted with two coats of approved enamel paints over one coat of primer red oxide including making cable connection with necessary gland, lugs/thimbles all as specified and directed by Engineer-In-Charge.
Supply, laying and testing 16.0sqmm 2 core XLPE cable insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor complete all as specified and directed.
Supply, laying and testing 16.0sqmm 4 core XLPE cable insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor complete all as specified and directed.
M&L for providing dry dibba sand in trenches as sand cushoining to U/G cable including punning down of sand in layers complete all as specified and directed.
M & L for 40 to 50 mm thick rough dressed Jodhpur type stone slab cover, 25 to 30 cm wide and 40 to 50 cm in length laid dry abutting each other or under ground protection complete all as specified and directed.
National Rewinding Works
M.D. CONSTRUCTION CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .