SUPPLY OF SOFAS AND CHAIRS FOR INTERIOR WORK OF TECHTOWER, SHAHEED NAGAR.

Amount

Description

SOFA & CHAIR

High Back Leatherette(MD,CHAIRMAN,CGM ). Supply fixing of High Back Leatherette ,AWSM Mechanism Aluminium edestal for Revolving Chair & seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with leather/leatherette/fabric and moulded polyurethane foam. The back shall be designed with contoured shape for extra comfort and made up of combination of 12mm (7 layers) & 4mm (3 layers) thick hot pressed plywood and 37mm thick, 32 Density U foam. Size of back shall be (W)-55.0cm, (H)-70.5 .0cm & size of seat shall be (W)-51.0cm x (D)-49.0cm. PU foam should be used in making seat which shall be moulded with density 55 +/- 5 kg/m ³ and hardness load 15-20 kgf for 50% compression.The armrests should made of black integral skin polyurethane with 50-70 shore 'A' Hardness and reinforced with M.S insert. . The armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of HR steel.The mechanism of chair shall have following features:360 degree revolving type, Seat/Back tilt ratio of 1:2, Synchronized tilt, Back tilt with 4 position locking and Side tilt tension adjustment knob should be operated while taking back support for better adjustment of comfort. The chair shall be provided with pneumatic height adjustment which shall have stroke of 12 cm. The pedestal shall be made of die-cast polished aluminium or nylon . It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black polypropylene or nylon . Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from ground - min 115.5 to max 127.5 cm. Seat height - min 43.0cm to max 55 cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards

Mid Back Leatherette. (DGM,GM ,AGM,PRIVATE SECERATRY)Supply fixing of Define Mid Back Leatherette & seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with leather/leatherette/fabric and moulded polyurethane foam. The back shall be designed with contoured shape for extra comfort and made up of combination of 12mm (7 layers) & 4mm (3 layers) thick hot pressed plywood and 37mm thick, 32 Density U foam. Size of back shall be (W)-55.0cm, (H)-54.5 cm & size of seat shall be (W)-51.0cm x (D)-49.0cm. PU foam should be used in making seat which shall be moulded with density 55 +/- 5 kg/m ³ and hardness load 15-20 kgf for 50% compression.The armrests should made of black integral skin polyurethane with 50-70 shore 'A' Hardness and reinforced with M.S insert. . The armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of HR steel.The mechanism of chair shall have following features:360 degree revolving type, Seat/Back tilt ratio of 1:2, Synchronized tilt, Back tilt with 4 position locking and Side tilt tension adjustment knob should be operated while taking back support for better adjustment of comfort. The chair shall be provided with pneumatic height adjustment which shall have stroke of 12 cm. The pedestal shall be made of die-cast polished aluminium or nylon . It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black polypropylene or nylon . Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from ground - min 97.5 to max 109.5 cm. Seat height - min 43.0cm to max 55 cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards

Mid Back.(WORK STATION,) Supply fixing of Thait it Mid Back .& cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly.Lumber support made up of injection moulded in black P.P and upholstered with PU foam. Lumber support size 16 cm (W) x 9 cm (H) at fixed position Size of back shall be (W)-55cm, (H)-58.0cm & size of seat shall be (W)-50 cm x (D)-44.0cm. Armrest has option of height adjustment . The arm top is made of soft moulded PU .The mechanism of chair shall have following features:360 degree revolving type, Synchro mechanism, Tilt tension adjustment, multi position tilt limiter with Back-safety return feature. The chair shall be provided with pneumatic height adjustment which shall have stroke of 95 +/- 5 mm. The pedestal shall be made of nylon. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in PP . Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from ground - min 102.5 to max 111.5 cm. Seat height - min 44.5 cm to max 53.5 cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards.

Mid Back.(BOARD ROOM,CONFERENCE) Supply fixing of Thait it Mid Back .& cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly.Lumber support made up of injection moulded in black P.P and upholstered with PU foam. Lumber support size 16 cm (W) x 9 cm (H) at fixed position Size of back shall be (W)-55cm, (H)-58.0cm & size of seat shall be (W)-50 cm x (D)-44.0cm. Armrest has option of height adjustment . The arm top is made of soft moulded PU .The mechanism of chair shall have following features:360 degree revolving type, Synchro mechanism, Tilt tension adjustment, multi position tilt limiter with Back-safety return feature. The chair shall be provided with pneumatic height adjustment which shall have stroke of 95 +/- 5 mm. The pedestal shall be made of nylon. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in PP . Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from ground - min 102.5 to max 111.5 cm. Seat height - min 44.5 cm to max 53.5 cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards.

3 Seater Leatherette. Supply fixing of 3 Seater Leatherette & seat , armrest & backrest assembly shall consists of a Pine understructure with plywood frame consisting layers of foam with wadding. The complete assembly shall be covered with Leatherette upholstery .The size of seat shall be: 55.0cm. (W) X 55.0cm. (D) X 22.0cm. (T) Approx. The size of back shall be: 55.0cm(W) X 35.0cm. (H) X 22.0cm. (T) Approx. Elastic Webbing is used to give a soft contour to the seat . It consists of a fabricated inner-frame hardboard assembly with layers of foam. The hardness of the P.U. foam= 16-20 Kgs. on Hampden m/c for 25% compression of the foam. The rectangular leg is made of wood and 4 tier packing is used to minimize damage & reduce wastage. Overall Dimensions of Chair shall be Seat Width - 54.5 cm, Height - 82 cm, Total width - 91 cm, Total length - 204 cm. Dimensions tolerance / variations shall be within +/- 1 cm.

1 Seater Leatherette. Supply fixing of 1 Seater Leatherette & seat , armrest & backrest assembly shall consists of a Pine understructure with plywood frame consisting layers of foam with wadding. The complete assembly shall be covered with Leatherette upholstery . The size of seat shall be: 55.0cm. (W) X 55.0cm. (D) X 22.0cm. (T) Approx. The size of back shall be: 55.0cm(W) X 35.0cm. (H) X 22.0cm. (T) Approx. Elastic Webbing is used to give a soft contour to the seat . It consists of a fabricated inner-frame hardboard assembly with layers of foam. The hardness of the P.U. foam= 16-20 Kgs. on Hampden m/c for 25% compression of the foam. The rectangular leg is made of wood and 4 tier packing is used to minimize damage & reduce wastage. Overall Dimensions of Chair shall be Seat Width - 54.5 cm, Height - 82 cm, Total width - 91 cm, Total length - 99 cm. Dimensions tolerance / variations shall be within +/- 1 cm.

Crystal Furnitech Private Limited

DADHEECH FURNITURE PRIVATE LIMITED