Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹18.5 LAccepted-AOC 11A LAXMI VIHAR BANDHAN PALACE WALI GALI MODIPURAM MEERUT UTTAR PRADESH 250110 | MEERUT | UTTAR PRADESH | 250110 | 1 | Accepted-AOC LOWEST | |
| 2 | 2₹19.9 L+₹95,872.40 (5.07%)Rejected-Finance | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹20.0 L+₹1.1 L (5.64%)Rejected-Finance | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹21.6 L+₹2.7 L (14.3%)Rejected-Finance SHIV BHAWAN GROUND FLOOR MAGADH COLONY ROAD NO 3 SHERGHATI ROAD GAYA BIHAR PIN 823001 | GAYA | GAYA | BIHAR | 823001 | 4 | Rejected-Finance NOT LOWEST | |
| 5 | 5₹22.2 L+₹3.4 L (17.7%)Rejected-Finance WZ 484 M S BLOCK HARI NAGAR NEW DELHI 110064 | NEW DELHI | NEW DELHI | DELHI | 110064 | 5 | Rejected-Finance NOT LOWEST |
Tender Value
₹24.3 L
EMD Value
₹48,600
Closing Date
18 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE GAYA
Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar, PIN-823005
SPL REPAIR TO BLDG NO T-22 OF MIL VET HOSP CL-III AT MIL STN GAYA
2022_MES_570982_1
8066/GE/E8
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GAYA
₹48,600
Yes
20 Mar 2023
23 Dec 2022
20 Jan 2023
23 Dec 2022
18 Jan 2023
4 Jan 2023
Amount
Dismantling of asbestos cement corrugated sheets as in roof coverings complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified & directed by Engr-in-charge
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour as in roof covering/Valley/Gutter/Ridges, fixed with self tapping screws complete.
Dismentling of ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and directed by Engr-In-Charge
S & F of 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system duly suspended with 2 mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof complete all as specified.
M & L for anodised aluminium snap grid frame work for false ceiling all as specified and as directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc
S&F cut to length and welded medium GI pipe 50 mm thick as specified and directed by Engr -in -charge
M & L for 15 mm thick rendering in CM 1:4 over fair faces of brick work or concrete surfaces of wall and finished surfaces fair and even without using extra cement complete.
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M & L Brick work using sub class old size bricks straight or curved on plan to any radius of half brick thick built in cement mortar 1:4 complete all as specified and directed.
M&L Brick work using sub class old bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and directed by Engr-in-charge
M&L 100 mm thick cement concrete type B-1(1:2:4) using 20 mm graded stone aggregate as in spike rooling to surfaces floor complete all as specified and directed by Engr- In- Charge.
M&L Plain Cement concrete type B-1(1:2:4) using 20 mm graded stone aggregate as in surface channels and drains complete including necessary form works all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.
Dismantling floor,hearth or wall tiling including cement mortar bedding and rubbish iff premish
M &L Glazed ceramic tiles in vertical surface 450X 300(7-8mm) thickset and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 on fair face of brick work or concrete surfaces as backing for tiles.all as specified and directed by EIC
M &L Non - skid Ceramic tiles 7-8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm( size 400X 400 mm ), in floors etc.over 20mm screed bed of CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified ad as directed
M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors over 15 mm screed bed of CM(1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match
S&F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing including distance pieces, cleats etc etc Fe 410 W (Gde E - 250 quality).
M & L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, framed guard bars; barred iron doors and similar work conforming to Fe.290.Gde-E-165
M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces
M & L for preparation of new plastered surfaces and applying two coat of acrylic distemper on walls complete all as specified and as directed.
M & L two coat of cement base paint white or tinted on walls or fascia of roof or chajjas on new or old decorated prepared plastered/painted surfaces of bldg complete all specified & directed.
S&F in Galvanised mild steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.18mm and fixed with beeding/Staples directed by Engr- in- charge.
S & F in repairs CPVC pipes 25 mm outer dia SDR 11 & Plain CPVC SDR 11 includig all fittings on walls/ceiling or laying in floors including necessary cutting/chasing of walls and floors complete.
Supplying and laying of CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 including all fittings laying in floors and wall complete all as specified and directed by Engr in charge.
M&L of mild steel TMT Bars 10 mm dia and over cut to length bent to shape required inculding cranking bending spirally for hooping for columns, hooking ends binding with and including mild steel wire (annealed) not less than 0.9 mm dia securing with clips complete as all spfd and directed by Engr-in-charge
M&L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete as all spfd directed by Engr-in-charge
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out
Returning filling including spreading levelling watering and well ramming not exc.25 cm thick soft or loose soil and getting out complete as all spfd and directed.
Removal of excavated soil upto distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above from starting point
S & F of Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete.
S & F of 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets.
S & F as in repair of white soft closing seat cover for pedestal pattern water closet including fixing bolts complete. (Make : Jaguar/Hindware)
S&F brass chromium plated health faucet 15 mm with flexible tube (1.5 m long) of stainless steel provided rubber hose and wall hook etc complete as in repair all as specified. (Make : Jaguar/Hindware)
S&F rotational moulded polythene water storage tank 1000l capacity (cylindrical verticals with closed top ) hoisted and fixed in position all as specified and directed
S & F of 6mm thick looking mirror of 1st quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete.(Saint Gobain/ModiFloat)
S&F in repair 15 mm dia bore bib taps, brass chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.
S&F in repair 15 mm dia two way bib taps, brass fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions.
S&F in repair 15 mm dia stop/angle valves, cast copper alloy, CP fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe.
S & F of Male Brass Threaded Adaptor (MTA/ MBTA) or Feale Brass Threaded Adaptor (FTA/ FBTA) complete.
S & F of PVC connections 15mm size with PTMT nuts of length 600mm
S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and connecting with manholes or disposal place.
S & F 110mm dia bore PVC (SWR) bends with access door all as specified and as directed.
S & F 110mm bore PVC (SWR) vent cowl with rubber ring joints, fixed to pipes all as specified.
S & F of PVC (SWR) junction single, (Single T) 110 mm bore equal or unequal with acess door complete.
M & L for 15- 18 mm Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
S & F Vitreuos china wash hand basin size 560x450mm oval shape incl brackets or fixed to walls with anchor fasteners all cutting for and pinning in end of brackets or erecting stand, and inclusive of fixing and supply and waste pipe and CP waste coupling 32 mm dia complete fixed. (Make-Parryware/Hindware/Jaquar)
Supply & fix in repair brass chromium plated pillar tap swan neck long body fancy type for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete.
Taking down chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each
M&L for pressed steel door frame size 105 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc. complete, all as specified.
M&L for pressed steel door frame size 165 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified.
M&L for providing PCC 1:3:6, type C-0 (using 12.50 mm graded stone aggregate) as in filling of pressed steel door frame and holdfasts including necessary formwork etc.
S & F 2nd class hard wood 40mm Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated
S&F for 35mm thick second class hardwood glazed and skelton door shutters (Three panels) open rebated and prepared to receive glass / gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sash bars size of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) complete.
M&L a coat of synthetic enamel paint over new /old wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces complete.
M&L Aluminium anodised barrel tower bolts of extruded section 100mm long
M&L Aluminium anodised barrel tower bolts of extruded section 200mm long
M&L Butt hinges extruded al alloy with galvanised MS hinge pin anodised 100mm long
M&L Aluminium anodised handle extruded fabricated type 100mm long
S&F for Aluminium alloy, anodised,sliding door bolt 200mm with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc complete as all spfd and directed by Engr-in-charge
M&L RCC 1:2:4 Type B-1 (20mm graded aggregate) slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete as all spfd and directed by Engr-in-charge
S&F powder coated aluminium frame /shutters for windows, ventilators sliding/openable etc including joining cleat for fixing, locking arrangement, rubber beading, screws, handles, hinges, tower bolts etc. complete all as specified. Make: JINDAL/HINDALCO/ INDALCO. Note :- (i) Glazing and wire mesh shall be measured and paid separetely forsupply only as the labour element included in this item.(ii) Item shall be paid as per weight of aluminium section.(iii) the rete quoted shall be inclusive of the cost of neoprene beading, glazingpin. screws and powder coated fittings such as hinges, handles, locking arrangement etc as required, which shall not be measured for arriving the weight. (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing
Excavating in post holes (or similar holes) in hard/dense soil each not exc. 0.5 cum, getting out. returning, filling in and ramming earth or broken rubble mixed with earth around. in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exc. 50 m and making good surface
M & L Cement concrete type C-2 (1:3:6) 40 mm graded aggregate) as in foundations, filling and mass concret.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete.
S&F mild steel work in post & struts in fencing including cutting tips to shape as directed. drilling holes. notching for wire etc. including flat iron fillets for securing wire mesh etc including all necessary drilling bolting or riveting of and similar work conforming Fe-290 Gde E-165.
M&L for Preparation of new Steel surface and applying two coats of synthetic enamel paint over a coat of red oxide over 10 cm width or girth.
S & F Miid steel bolts, purpose made, with: hexagonal or 'Square head one end and screwed the other. or screwed both ends: each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long (Diameter of neck in n exc 12mm) complete all as specified and as directed.
M&L 75mm thick cement concrete type C-2 ,PCC (1;3:6) (40mm graded stone stone aggregate )as in path as directed by engineer in charge
M & L 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying checkered tiles all as specified and directed by Engr-in-charge.
M&L For rubber moulded Chequered cement concrete tiles any size, any colour set, jointed and pointed in neat cement slurry in floors with gray cement and all as specified
S&F of GI pipe to be used as pillars in shed of dia 50mm .
S&F of GI pipe to be used as pillars in shed of dia 80mm .
Taking down carefully aluminium point wiring (light, fan, socket or power) complete, including fittings and fixtures such as switches, ceiling roses, light fittings, regulators, sockets etc., removing materials to store or keeping in safe custody for re-use at site or offering credit and making good disturbed surfaces of walls, floors, etc., complete all as specified and directed.
M & L for point wiring complete with PVC insulated unsheathed electric FRLS cable 1100V grade single core multistranded copper conductor cable conforming to IS:694 of size 1.5 Sqmm two single core drawn through in and including PVC conduit pipe not less then 20mm dia medium grade ISI Marked complete conduit accessories in concealed wiring system with one run of PVC insulated copper conductor cable 1.5 Sqmm single core green colour earth wire and connecting to earth dolly incl colour coding of cable shall be for phase, neutral and earth wire as specified in MES SSR Part-I 1991 with provn of sunken galvanised not less than 1.12 mm thick MS sheet pressed terminal boxes concealed on wall, with 3 mm thick laminated sheet top cover ISI marked. Make: Hylum/Anchor for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/ floor complete area in same specification as per existing all as specified and directed. Make of Wire : Havells/ Finolex/ Plaza
(a) One light/fan/bell point controlled by one switch.
(b) One 3 pin socket outlet 5 Amps independent board.
(c) One 3 pin socket outlet 5 Amps on the same board with other switch.
All as per item No. 2 here-in-before but one socket outlet point 15 Amps independent with cables of size 2.5 sq mm multistranded, PVC insulated unseathed FR copper conductor cable, and 1.5 sq mm PVC insulated unsheathed copper conductor cable as earth continuity conductor connected to common earth dolly all are in separate PVC conduit med grade not less than 20mm dia ISI marked ivory colour, incl. provn of sunken galvanised not less than 1.12 mm thick MS sheet pressed terminal boxes of suitable size & 3 mm thick laminated hylum sheet top cover of required size all as specified and directed.
Supply and fix switch piano flush button single pole one way 5 amp complete.
Supply and fix ceiling rose surface bakelite 65x50mm 2 to 3 terminal complete
Supply and fix socket outlet 2-in-1 , 5 pin, 6 Amps flush type complete
Supply and fix switch socket combination 2-in-1, 5 pin, 6 Amps flush type complete
Supply and fix stepped type electronic fan regulator flush type complete.
Supply and fix switch socket combination 2-in-1, 3 pin, 6 and 16 amp flush type universal complete.
S & F sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. Make: Havells/ L&T/Legrand Note: MCB's are measured and paid in separate items and same make.
Supply and fix sheet metal enclosure distribution board SPN, 8 ways 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete.
Supply and fix MCB isolator TPN, 415 volts, 63 Amps complete all as specified and directed.
Supply and fix MCB single pole and neutral, 240 volts, 40 to 60 Amps all as specified and directed.
Supply and fix MCB single pole, 240 volts, up to 40 Amps all as specified and directed.
S & F building security light fitting 1x 35/36 W LED new generation energy saving & environmental friendly long life LED street/bldg security light made up of pressure die cast aluminium housing with mid power LED as lighting source and PC cover having top opening including driver compartment driver with IP66 protection and impact resistance of IK07 including with suitable for 32mm dia medium grade GI bracket not exc 1.5 mtr length made to shape & fixing on pole/wall with 2 nos of MS clamp including necessary connection from LT OH line/buildings Make:- Havells/ Crompton/Bajaj.
S & F for LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.
Supply and fixing LED lights fitting 1x18/20 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
M & L earthing with galvanized steel earthing plate electrode 60 cm x 60 cm 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep being ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connecting to a galvanised earth lead wire 4 mm dia by means of bolts, nut check nut and washers protected with and including 15 mm dia light grade GI pipe, necessary excavation and earth work, charcoal and common salt filling, watering arrangement with 20 mm GI pipe light grade including PCC pit with pre cast RCC (1:2:4) cover, GI funnel with test point, testing and commissioning all as specified and directed.
M & L for sub main wiring complete with two runs of 6 sqmm single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls / roofs / floors etc., with one run of 4 Sqmm single core multistranded copper conductor as earth continuity conductor, all as specified including dismantling unserviceable sub main wiring and accessories. Note:- One run of conduit two run of 6 sqmm copper condictor & one run of 4 sqmm copper conductor is measured as one unit.
Taking down carefully ceiling/wall fan 1200/400 mm sweep from the exisiting position complete with blades from brackets etc and servicing the same properly by cleaning, greasing, oiling, replacing the unserviceable minor spare parts etc if any, and reassembling and refixing in the same position painting same with one coat of synthetic enamel paint of existing colour using brush and rewriting of MES No complete all as directed.
S & F for exhaust fan heavy duty single phase 300 mm sweep, 1400 RPM, 240 Volts, AC with and including louvers, mounting rings, MS rag bolt, washers etc and connecting from ceiling rose/connector with and including suitable size flexible copper conductor PVC insulated sheathed chord and duly making holes complete all as specified and directed at site.
Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm x 4 Core passing through DWC HDPE / in trench including necessary connection with lugs and cable gland etc complete all as specified and directed.
Excavation in trenches n.exc 1.5 mtr wide and 1.5 mtr in depth in hard/dense soil for taking up/ laying of cable and getting out complete all as specified and directed.
Returning, filling in excavated soil including spreading, leveling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed.
Removing surplus soil to a distance n.exc 50 mtr and making good the disturbed surfaces complete all as specified and directed.
Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site.
Supply and laying for brick of common burnt clay, sub class 'B' old size laid flat and dry on cables as in cable protection in trenches over cables perpendicular to direction of cables abutting each other complete all as specified and directed.
M/s Vikram Singh
M/S MAGADH CONSULTANT
M/S NIRBHAY KUMAR SINGH
MS HARI MOHAN GUPTA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .