SAI/NSRCL/LKO/INFRA/NIT-LKO ELCT/2025-26/ CN-115937

Servicing Commissioning & Testing of existing 500 KVA Transformer

Servicing Commissioning & Testing of existing 500 KVA Transformer

Filtration & Dehydration of existing 500 KVA Transformer Oil

Supply Of TRF OIL of existing 500 KVA Transformer Oil

Supply of Silica gel with Britcher including hiring of Filtration Machine

Service & repairing of following diesel generator through OEM authorised agencies with all requisite materials like engine oil,coolant,oil filter,fuel filter,fuel pipe,hose pipe, relay-contactor etc all complete with freight & labour charge as per direction of EIC.

125 KVA DG-Make Kirloskar

Repairing of existing street lights with OEM parts & accessories of following watt including renewing of frame,glass, drivers,clamps accessories whatever necessery all complete as per instruction of EIC

SITC of LED street light 60W(make: surya)(without pole)

SITC of LT panel contactor including accessories & labour charges all complete as per direction of EIC.

SITC submeter 50Amp single phase all complete as per direction of EIC.

SITC of contactor in existing LT panel including accessories & labour charges all complete as per direction of EIC.

Repairing of existing flood lights OEM parts & accessories ranging from 250V,200V,150V including renewing of frame,glass, accessories whatever necessery all complete as per instruction of EIC

Servicing & testing through OEM agency of following HT & LT system with all requisite materials all complete with freight & labour charge as per direction of EIC. RMU(make- L&T), VCB-I & II(make ABB, 800 Amp) 02 Nos CSS(make L&T) 02 nos LT Panel(make L&T) 01 Nos OLTC TFR (make CG) 01 Nos AMF panel ( make-NA) 03 Nos Capacitor bank panal (01 Nos 150 KVAR & 2 Nos 300 KVAR) Earthing- 35 Nos

Structural steel work riveted, bolted or welded in built up sections, trussesand framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Flashings/ Aprons.( Upto 600 mm)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand) sqm