ATTENDING DAY TO DAY COMPLAINTS, REPAIRS TO TILING, REPAIRS TO GI/CI FITTINGS, REPLACEMENT OF BATHROOM FITTINGS, REPAIR/REPLACEMENT TO WOODEN DOORS, GLASS AND PERIODICAL SERVICES AT MANEKSHAW CENTRE AND KHYBER LINE UNDER GE (SOUTH) DELHI CANTT-10

Amount

M&L for preparation of old painted surface with one coats of plastic emulsion paint over a coat of primer and application of filling material/putty where ever required complete to match the existing shade of colour complet all as specified and as directed.

S&F in repairs stainless steel pipe railing of 100mm dia, grade SS 304 including fixing and grouting with RCC wall and complet all as specified and as directed.

Providing and fixing in repairs aluminium composite panels cladding of approved make having total thickness of 4 mm (Top coil -0.5mm, non Toxic PE-Core-3 mm and back Coil -0.50 mm) with 25 micron PVdF Coating on top coil and polyester/epoxy coating on back coil (4-7 Microns) on aluminium substructure fixed with 19 mm x 12 mm x 1.6 mm aluminium cleat & 10 x 100 mm SS Wooden screw with PVC plug on faced horizontal/ vertical surfaces of rectangular/circular columns, suspended ceiling Cills, jambs, canopy with including neccessary aluminium frame, scafolding etc and making 12 mm to 20 mm wide grooves and applying non staining and non streaking sealant of Dow corning (789 or 991 HP) and backing rods and approved shade by Engr-in-Charge and complet all as specified and as directed. Only exposed surface shall be measured and paid for ACP Material shall be for exterior application & of shade as approved by Garrision Engineer. Note:-The work is to be carried and upto 18mtr height of building and rate quoted by the tenderer are deemed to be included for scaffolding and work upto a height of 18 mtrs)

M&L for prepration of old treated surface of any description and applying one coat of texture paint by using roller/ paint spray machine as per manufacturer instructions including necessary scaffolding as required for upto 12 mtrs hight complet all as specified and as directed. Note : Four leg scaffolding shall be used to carry out texture paint and no Jhoola system shall be admitted at site.

Atteding complaint for Petty repair to leaking bib cock, pillar cock, stop cock, angle valve, gate valve any size, brass spindle, waste pipe, shower rose, float valve, concealed stop cock, PVC connection of any description by changing of jumper washer, spindle for bib cock, pillar cock, concealed stop cock etc or putting M seal cleaning of air lock in the pipe for ensuring proper water Supply Repair to leaking flushing cistern low/high level, incl adjustment in the internal fiiting replacement of syphon, washer/jumper, flush handle, lever etc as required, Petty repair for rectification of air lock in GI pipe and making the water Supply available upto water taps incl attending the complaints of no water Supply.repair to PVC bend, pipe etc. complet all as specified and as directed. Note:-Rates are deemed to be included for T&P and material like washer, M Seal, etc. required for petty repairs and taking down and fixing of small fittings here-in-after for the items catered as "Supply only"

Notes:- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. 2. Contractor shall Provide adequate plumber with all necessary T&P on all working days from 08:30 AM to 5:00 PM at Manekshaw Centre Delhi Cantt. 3. A recovery of Rs. 500/- per person shall be recovered from the contractor for non-deploying of plumber on any working days. 4. The contractor will ensure that the team of Plumber with necessary tools bag shall always remain present at complaint cell to attend the complaints. 5. All the complaint slip, register & other connected documents will be provided and maintained by the contractor without any extra cost. 6. Proper record (date wise) of complaints received & rectified by the contractor and attendance register of tradesman shall be maintained and shall be produced for the verification at the time of payment of each RAR/Bill

Supply only hand shower Chromium plated (health faucet) with 1 m long flexible tube with wall hook with NRV (back flow Preventer) complete all as specified and as directed.

Supply only CP brass bottle trap 32 mm dia including jointing to waste fitting and waste pipe complete all as specified and as directed.

Supply only cast copper alloy CP angle valve etc for 15 mm bore pipe (ISI marked) complete all as specified and as directed.

Supply only 32 to 40 mm bore PVC waste pipe for WHB & sink 60 cm long with union complete all as specified and as directed.

Supply only SS paper holder as per sample kept in GE's office.

Supply only 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complet all as specified and as directed.

Supply only 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complet all as specified and as directed.

Supply only GI socket 15 mm ISI mark.

Supply only Elbow GI 15mm dia.

Supply only Elbow Reducer GI 15x20mm dia.

Supply only Nipple GI running 15mm x 75mm long ISI marked.

Supply only Tank nipple 15/20 mm.

Supply only Union G.I 20 mm dia, ISI Marked.

Supply only GI plug 15mm.

Supply only Socket reducer 15x20 mm dia, ISI Marked.

Supply only Sprindal (face) full turn/ half turn of any number.

M&L for cleaning of all blockages of Nahni traps/ floor traps/ bottle traps, blockages of WC's, Rain water pipes, Rain water spouts at roof level, 100mm dia CI pipes upto 1st manhole/GT in shafts, vertical CI soil/ waste pipe stacks, CI Tee/ door bends etc & cleaning of drain pipes 150mm to 250mm internal dia by rodding and manholes upto 3.0 metre in depth and removal of sludge/silt/liquid mud sand (in foul conditions) etc, out of MOD premises (at the location notified by the local Municipal Corporation/ Cantt board), and maintain internal & external sewage system in functional state at all the time with manual/pressure cleaning pump and flexible rods and other necessary equipments (as per rules of public health), including digging required nos of pits for depositing sludge and furture capping the pit with the 25cm thick layer of soil complet all as specified and as directed.

Notes:- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. 2. Contractor shall Provide One safaiwala with all necessary T&P on all working days from 08:30 AM to 5:00 PM at Manekshaw Centre Delhi Cantt. 3. A recovery of Rs. 500/- per person shall be recovered from the contractor for non-deploying of Safaiwala on any working days. 4. The contractor will ensure that Safaiwala with necessary tools bag shall always remain present at complaint cell to attend the complaints. 5. All the complaint slip, register & other connected documents will be provided and maintained by the contractor without any extra cost. 6. Proper record (date wise) of complaints received & rectified by the contractor and attendance register of tradesman shall be maintained and shall be produced for the verification at the time of payment of each RAR/Bill

Attending complaint for repair to easing of any type of Doors/Window/Cup Board shutters and chowkhats, dressing table, pelmets, plate rack incl Aluminum doors by tightening of hinges / handles / aldrop bolt / tower bolt / knobs, hasp and staple etc of any size / any number of panels for easy closing / opening or changing the position of hinges, adjustments of tower bolts, sliding bolts, looking mirror, curtain rod etc complete including taking down joinery and refixing in the same place (The quoted rate by the tenderer are deemed to be included for small material like, screws, nails, bits, fevicol etc and fixing of items here-in-after which are catered as "Supply only")

Notes:- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. 2. Contractor shall Provide One Carpenter with all necessary T&P on all working days from 08:30 AM to 5:00 PM at Manekshaw Centre and Khyber Line Complaint Cell. 3. A recovery of Rs. 500/- per person shall be recovered from the contractor for non-deploying of Carpenter on any working days. 4. The contractor will ensure that the team of Carpenter with necessary tools bag shall always remain present at complaint cell to attend the complaints. 5. All the complaint slip, register & other connected documents will be provided and maintained by the contractor without any extra cost. 6. Proper record (date wise) of complaints received & rectified by the contractor and attendance register of tradesman shall be maintained and shall be produced for the verification at the time of payment of each RAR/Bill. 7. The rate quoted by the tenderer are also included for taking down of unsv items and fixing of new items.

Supply only Galvanised steel wire cloth. 0.63 mm nominal dia of wire and average width of aperture 1.40mm complet all as specified and as directed.

Supply only 200 mm long stainless steel tower bolts fixed to wooden door shutters with SS screw complete all as specified and as directed.

Supply only 150 mm long stainless steel tower bolts fixed to wooden door shutters with SS screw complete all as specified and as directed.

Supply only 300 mm long sliding door bolts stainless steel fixed to wooden door shutters with SS nut bolts etc. complete all as specified and as directed.

Supply only Stainless steel foot door stopper with double rubber fixed to wooden doors with SS screws complete all as specified and as directed.

Supply only glass door angle lock with corner patch lock with strike plate SS 304 cover of 1.5 mm thick complete all as specified and as directed. Make : Godrej/Kenz/Dorset.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complet all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement laid over and including 15mm thick screed bed in CM 1:6 to match complete all as specified and as directed.

M&L for Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement laid over and including 15mm thick screed bed in CM 1:6 to match complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement laid over and including 10mm thick cement plaster in CM 1:4 as backing to match complet all as specified and as directed.

M&L for SS railing buffing with sand paper with mechanincal means including cleaning of surface with soap and a clean sponge /brush, preparation of surface to make the railing to its original finish complet all as specified and as directed.

M&L for SS spider fitting with sand paper with mechanincal means including cleaning of surface with soap and a clen sponge /brush, preparation of surface to make the railing to its original finish complet all as specified and as directed.

Cleaning of rain water sumps of size n exc 2.00m X2.00m X1.50m by taking out the sludge mud/slits etc and removing to outside of MoD premises (at the location notified by the local Municipal corporation/Cant board) complet all as specified and as directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc. complet all as specified and as directed.

M&L for 15mm thick cement mortar plaster on external faces of brick or concrete surfaces in CM 1:4, finished even and fair without using extra cement complet all as specified and as directed.

M&L for preparation of new plastered surfaces of walls applying two coats of cement base paint over a coat of alkali resistant primer complete to match the existing shade of colour complet all as specified and as directed.

M&L for preparation of old plastered surfaces of walls and applying a coats of cement base paint over a coat of alkali resistant primer complete to match the existing shade of colour complet all as specified and as directed.

S&F in repairs strip of 5mm thick, 300mm wide with APP sheet including sealing with screws and side with water proof/leak prrof joints of crumple joints near door on floor for traffic movements complet all as specified and as directed.

M&L prepration of old treated steel surface of any description and applying one coat of Ducco paint by using paint spray machine including necessary scaffolding as required for upto 12 mtrs hight complet all as specified and as directed.

S&F in repairs Steel rolling shutters of 1.25mm thick, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple but gear operated type with bevel gear box and crank handle and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complet all as specified and as directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complet all as specified and as directed.

M&L for 20 mm thick granite pre-polished (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 20mm thick screeed bed in CM 1:6 complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick laid over including 20mm thick 1:6 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complet all as specified and as directed.

Supplying and installing in repair, openable double swing double leaf doors in required sizes in structural glazing system using 10 mm thick toughened clear glass including providing & fixing necessary imported stainles steel frame finished hardware fitting patch fittings, 2 Nos 450 mm size back to back S.S handles per shutter, Heavy duty floor springs for external applications, locking arrangements, keys etc. complet all as specified and as directed.

M&L for removing glass panels doors exc 1.50 to 4 Sqm and repair the damaged parts like top, bottom patch, floor spring, handles, locks etc and place it to its original location complet all as specified and as directed.

S&F Plain, solid, straight chowkats and frames in second class hard wood, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complet all as specified and as directed.

Taking down Chowkhats incluidng frame n.exc 1.5 Sqm and refixing shutter on new chowkhats in same opening after necessary repairs to make functional and fixing of builders hardware in shutter like SS handle, tower bolt, mortice lock, hinges, door stopper etc. complet all as specified and as directed.

Taking down Chowkhats including frames exc 1.5 Sqm but n.exc 4 Sqm and refixing shutter in new chowkhats in same opening after necessary repairs to make functional fixing of builders hardware in shutter like SS handle, tower bolt, mortice lock, hinges, door stopper etc. complet all as specified and as directed.

M&L for newly untreated wood surfaces with a coat of zinc chrome primer, two coats of synthetic enamel paint on wooden surfaces of any description not other wise described over 10cm with or girth complet all as specified and as directed.

S&F in repairs 35mm thick laminated flush door,including all fittings ie SS hinges, SS handles 200 mm long -02 Nos, SS tower bolts of 200 mm long, sliding door bolt of 300 mm long with fixing nut & bolts, 1.0mm thick both side laminate with shade No.D.No.10566 W V Woodlander or 10073 Wave Cango /D No.49913 Seda Espana/10596 Venza Scandinavian Vertical Oak/ DNO 10544 Canadian walnut (New) (BWR grade ISI mark) complet all as specified and as directed. Make:- Marino

M&L for :- (a) Removal of old wooden shutter and taking down of all builders hardware like SS hinges 150mm-03 Nos, SS handles 200 mm long -02 Nos, SS tower bolts of 200 mm long - 02 Nos, sliding door bolt of 300 mm long-01, mortice lock 60mm dia with Key-01, hydraulic door closer -01 Nos with fixing nut & bolts, including 1.0mm thick both side laminate (b) Fixing of both side laminate with shade as per sample approval and refixing of all fittings like SS hinges 150mm -03 Nos, SS handles 200 mm long-02 Nos, SS tower bolts of 200 mm long-02 Nos, sliding door bolt of 300 mm long-01, mortice lock 60mm dia with Key-01, hydraulic door closer -01 Nos with fixing nut & bolts, including 1.0mm thick both side laminate making good to shutter if any or complet all as specified and as directed. Make :- Century ply/Green ply

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching out or drilling out old glazing pin/clips complete all as specified and as directed.

S&F Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane of 5.50mm thickness complet all as specified and as directed.

Dismantling of glass mosaic tiles from water body including cement mortar bedding (but not backing), removing and rubbish off the premises complet all as specified and as directed.

Supply only glass mosaic tile, random mix, piece size20x20mm, 4mm thick and sheet size 327x327mm,joint gap 1.92mm,make-italia/bisajja/cube mosaic complet all as specified and as directed.

Fixing and grouting of glass mosaic tile, random mix, piece size20x20mm, 4mm thick and sheet of size 327x327mm, joint gap 1.92mm by adhesive (cement polymer base) complet all as specified and as directed. Make:- MYK LATICRETE/KARKOL/BALENDURA/SIKA

Taking up or down 15mm bore GI tubing and connections including cleaning for refixing with all fittings or removal to store.

All as per Srl item No.59 above, but 20 mm bore GI tubing.

S&F 15mm bore GI tubing medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complet all as specified and as directed.

All as per Srl item No.61 above, but 20 mm bore GI tubing

S&F in repairs sensor type Urinals integrated EFS of Make 'Parryware' all as specified and as directed.

S&F in repairs of existing size glass door top patch with Pivet & fin (R) and (L) complete all as specified and as directed. Make:- Ozone /Kenz/Dorset. Note:- Sample is kept in GE's office.

S&F in repairs only glass door bottom patch complete all as specified and as directed. Make:- Ozone /Kenz/Dorset. Note:- Sample is kept in GE's office.

S&F in repairs 450 mm long stain less steel 'H' type handles fixed to wooden/ glass doors with necessary nut bolts etc. complete all as specified and as directed.

S&F in replairs 125 mm long stainless steel hinges ball bearing type fixed to wooden shutters with SS screws complete all as specified and as directed.

S&F in repairs of existing size cylindrical lock without key with S.S. finish complete all as specified and as directed. Make:- Dorset/Ozone/Kenz. Note:- Sample is kept in GE's office.

S&F in repairs of existing shape & size only cylindrical lock with key with SS finish of Make 'Dorset' one side key & one side knob complete all as specified and as directed. Note:- Sample is kept in GE's office.

S&F in repairs of existing shape and size Zara mortise handle with lock & cylinder 60 mm key & key in SS finish complete all as specified and as directed. Make:- Dorset/Ozone/Kenz. Note:- Sample is kept in GE's office.

M&L for removal of existing treatment by wire brushing, cleaning with water, & filling with putty to make the surface even and smooth and applying a coats of pink primer and two coats synthetic enamel paint including prepartaion of surface. Colour scheme to be approved by GE complete all as specified and as directed. .

M&L for complete removal of old stone surface by wire brushing, cleaning with water and applying a coats of primer and two coats of floor paint including prepartaion of surface. Colour scheme to be approved by GE complete all as specified and as directed. .

M&L for Painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint, white or golden yellow etc. with adequote nos of coats complete all as specified and as directed. .

S&F in repairs strong duracell ultra AAA battery complete all as specified and as directed. .

Dismantling water tanks of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and as directed. .

All as per Srl item No.75 above, but exceeding 500 litres but and not exceeding 1000 litres.

S&F 500 ltr capacity tripple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed. .

All as per Srl item No.77 above, but 1000 litres capacity.

Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender

Chaudhary Constructions

M/S Parmod Johar

M/S SONU ENTERPRISES