REPAIR / REPLACEMENT OF PIPE LINE, PUMP SET, SLUIVE VALVE, OH TANK AT AATS AND WATER FILTER PLANT , PUMP SETS , MOTORS OF SWIMMING POOL AND DIVING TANK AND CONNECTED WORKS UNDER AGE E/M OF GE(EAST) AGRA

Amount

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr deep in soft/loose soil and getting out for taking down/laying Pipe lines of any description and in any position including forming sides and bottom surface to required level/ gradients complete all as specified and directed.

Returning, filling in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing of surplus soil to a distance not exceeding 50 M and depositing where directed at a level not exceeding 1.5M above the starting point complete all as specified and directed.

Supply & fixing in repair, 80mm bore galvanized iron water tubing medium grade, jointing and testing in trenches/floor/wall,including provision of all necessary steel fittings/ accessories complete all as specified and directed. Make TATA/ Jindal/Praksh

Supply & fixing in repair, 40mm bore galvanized iron water tubing medium grade, jointing and testing in trenches/floor/wall,including provision of all necessary steel fittings/ accessories complete all as specified and directed Make TATA/ Jindal/Praksh

Supply & fixing in repair, 25mm bore galvanized iron water tubing medium grade, jointing and testing in trenches/floor/wall,including provision of all necessary steel fittings/ accessories complete all as specified and directed Make TATA/ Jindal/Praksh

Supply & fixing in repair, 20mm bore galvanized iron water tubing medium grade, jointing and testing in trenches/floor/wall,including provision of all necessary steel fittings/ accessories complete all as specified and directed Make TATA/ Jindal/Praksh

Supplying ,laying, jointing & testing in trenches in repair DI pipe (K7) 100 mm bore with spigot and socketed ends centrifugally cast (spun cast) and including of rubber tyton joints complete all as specified and directed by Engineer-in-Charge for the following size:- Note :-(i) Earth work and CI specials/fittings of the pipes shall be measured and paid for separately under appropriate item of Schedule `A' (ii) Joints of the pipes shall be included in the item quated rates measured and paid for separately under appropriate item of Schedule `A'.

Supply & fixing in repair 300 mm bore , cast iron sluice valve of class PN-1 conforming to IS-14846 of 2000 both ends flanged with iron wheel head and stainless steel spindle, long body type,jointing and testing, ISI Marked, of approved quality complete all as specified and directed.

Supply & fixing in repair 200 mm bore , cast iron sluice valve of class PN-1 conforming to IS-14846 of 2000 both ends flanged with iron wheel head and stainless steel spindle, long body type,jointing and testing, ISI Marked, of approved quality complete all as specified and directed.

Supply & fixing in repair 150 mm bore , cast iron sluice valve of class PN-1 conforming to IS-14846 of 2000 both ends flanged with iron wheel head and stainless steel spindle, long body type,jointing and testing, ISI Marked, of approved quality complete all as specified and directed.

Supply & fixing in repair 100 mm bore , cast iron sluice valve of class PN-1 conforming to IS-14846 of 2000 both ends flanged with iron wheel head and stainless steel spindle, long body type,jointing and testing, ISI Marked, of approved quality complete all as specified and directed.

Supply & fixing in repair 80 mm bore , cast iron sluice valve of class PN-1 conforming to IS-14846 of 2000 both ends flanged with iron wheel head and stainless steel spindle, long body type,jointing and testing, ISI Marked, of approved quality complete all as specified and directed.

Supply& fixing in repair ISI Marked, of approved quality, cast iron non return valve 100 mm bore, both ends flanged jointed and tested complete all as specified and directed.

Supply & fixing in repair 40 mm bore gun metal globe/gate valve with iron wheel head, both ends screwed for iron pipe , jointing and testing ISI Marked approved quality complete all as specified and directed.

Supply & fixing in repair 25 mm bore gun metal globe/gate valve with iron wheel head, both ends screwed for iron pipe , jointing and testing ISI Marked approved quality complete all as specified and directed.

Supply & fixing in repair 20 mm bore gun metal globe/gate valve with iron wheel head, both ends screwed for iron pipe , jointing and testing ISI Marked approved quality complete all as specified and directed.

Material and labour for run lead joints including cutting properly for 200 mm bore CI pipes/fittings etc complete all as specified and directed.

Material and labour for run lead joints including cutting properly for 100 mm bore CI pipes/fittings etc complete all as specified and directed.

Material and labour for run lead joints including cutting properly for 80 mm bore CI pipes/fittings etc complete all as specified and directed.

Material and labour for "D" joint made out of CI collar and rubber ring for 100 mm bore of CI/GI pipes complete all as specified and directed.

Material and labour for "D" joint made out of CI collar and rubber ring for 80 mm bore of CI/GI pipes complete all as specified and directed.

Material and labour for "D" joint made out of CI collar and rubber ring for 50 mm bore of CI/GI pipes complete all as specified and directed.

Disconnecting the existing non functional submersible pump set from panel board, dismantling existing CI bend from non return valve, removing and lifting out submersible pump set of any description and capacity & in any position, along with existing column pipe 80/50mm dia and existing submersible cable of any size from the bore well 150mm bore (approximately 40 mtr depth of pump set from GL) complete all as specified and directed. NOTE: 1. Contractor shall take proper precautions while lifting out and removing pump set from bore well so as to avoid any damage to column pipe and submersible cable. All necessary T&P and equipments required for lifting out pump set etc shall be arranged by the contractor at his own cost.

Lowering down of the submersible pump set after repair of any description and any capacity & in any position, in bore well alongwith column pipe 80/50mm dia and submersible cable of any size (approximately 40 mtr depth of pump set from GL) complete all as specified and directed by Engineer-in-Charge including making necessary electric connections & testing the pump set after lowering. NOTE: 1. Contractor shall take proper precautions while lowering pump set in bore well so as to avoid any damage to column pipe and submersible cable. All necessary T&P and equipments required for lifting out pump set etc shall be arranged by the contractor at his own cost. 2. Rates quoted by the contractor for the above item includes the cost of assembling & connecting pump set to column pipes & assembling, jointing and fixing column pipes/pump sets/submersible cable and making necessary connections and including reconnecting water supply system. The required materials like column pipes/ /submersible cable/pump sets etc (new/old retrieved materials) shall be provided by the department to contractor for fixing and lowering in bore wells)

Dismantling of defective submerceble pumping set capcity 7.5 HP from pump house including transpotation to civil workshop for repairing,overhauling of pumping set including dismantling into parts, and replacement of unservicable thrust bearings of existing size / make , Bush , gland packing ,gaskets, seal, wornout nuts and bolts including repair and lathing to shaft ,greasing and rewinding to electric motor with copper wire of existing size and reassembling, testing complete all as specified and directed.

Dismantling of defective cetrifugal pump set of 20 HP from pump house including transpotation to civil workshop for repairing,overhauling of pumping set including dismantling into parts, and replacement of unservicable ball bearings of existing size / make , Bush , gland packing ,gaskets, Tyre coupling/ coupling seal, air realse valve ,wornout nuts and bolts including repair and lathing to shaft ,greasing and reassembling, testing complete all as specified and directed.

Dismantling/taking out defective electric motor of capacity 20 HP from pump house including transpotation to civil workshop for rewinding with super enamelled copper winding wire of existing size including dismantling into parts, and replacement of unservicable ball bearings of existing size / make , wornout nuts and bolts including repair and lathing to shaft ,greasing and reassembling, testing complete all as specified and directed.

Draining out water from OHT by operating wash out valve ,Cleaning of over head tank (staging from 6 meter to 18 Meter) (inside) by scraping with the help of hard brushes and physical cleaning of over head tank (reservoir) by descaling / brooming silt and other deposit in side (bottom of dome). collecting and taking them out with help of manual labour and depositing not exceeding 50mtr all as directed. Cleaning of inner surface of OHT by applying the bleaching powder solution (1:10) and left it for 1/2 hour for making surface algee/ bacteria free .clean the surface with water and drying it quick with the help of electric air blower. Applying two coat of thick quick drying lime wash on entire surface (inner) top and bottom including writting date of cleaning with white paint on back painted surface two places and painting of inner steel ladder of tank completeall as specified and directed.

M&L for repair to leakage of DI/CI 100 bore water mains including disposal of water from trench by manualy or mechanically, excavation and earth work in any type of soil, burning out old lead, cleaning joints and filling with and including fresh pig lead and cocking to make joint leak proof compete all as specified and directed. Note : If new lead joint provided shall be paid seperately under above relevent items.

M&L for repair to leakage of GI 100 bore water mains including disposal of water from trench by manualy or mechanically excavation and earth work in any type of soil, replacement of minor fitting such as sockets, union, threading, screwing etcto make joint leak proof compete all as specified and directed.

M&L for repair to leakage of GI 80 bore water mains including disposal of water from trench by manualy or mechanically excavation and earth work in any type of soil, replacement of minor fitting such as sockets, union, threading, screwing etcto make joint leak proof compete all as specified and directed.

M&L for repair to leakage of GI 50/40/25 mm bore water mains including disposal of water from trench by manualy or mechanically excavation and earth work in any type of soil, replacement of minor fitting such as sockets, union, threading, screwing etcto make joint leak proof compete all as specified and directed.

Supply and fixing in replacement of starter suitable for 5 HP pumping set Make Havells Cat Pt NoIHSDOAK1LA(Three phase DOL ) or equivalent complete all as specified and directed.

Supply and fixing in replacement of starter suitable for 7.5 HP pumping set Make Havells Cat Pt NoIHSDOAK1LA(Three phase DOL ) or equivalent complete all as specified and directed.

Supply and fixing in replacement of starter suitable for 20 HP pumping set Make Havells Cat Pt NoIHSDOAK1LA(Three phase ASD ) or equivalent complete all as specified and directed.

Supply & fix in replacement to Single phase preventer type VSP complete all as specified and directed. Make- MINILEC / AE/Bentex

Supply and fix submersible cable PVC insulated copper conductor of size 6 Sqmm 3 core 11 Volts grade complete all as specified and directed.

Supply including mixing Calcium hypo chloride Granular in sealed container of 45 Kg as per requirement on daily basis.

M & L for PCC 1:2:4 Type B-1( Using 40 mm graded stone aggregate) as in coping etc complete all as specified and directed.

Supplying and fixing in repair MCCB 630 Amps with sheet metal enclosure, MCCB ,4 Pole, 50Hz , Icu= 25 KA at 415 volts, with thermal magnetic release & Ics=100% Icu with adjustable over load setting (minimum 80% to 100%) complete all as specified and directed. Make of MCCB - ABB, Siemens, L&T, Legrand, Schneider

Supplying and fixing in repair MCCB 400 Amps with sheet metal enclosure, MCCB ,4 Pole, 50Hz , Icu= 25 KA at 415 volts, with thermal magnetic release & Ics=100% Icu with adjustable over load setting (minimum 80% to 100%) complete all as specified and directed. Make of MCCB - ABB, Siemens, L&T, Legrand, Schneider

Supplying and fixing in repair MCCB 160 Amps with sheet metal enclosure, MCCB ,4 Pole, 50Hz , Icu= 25 KA at 415 volts, with thermal magnetic release & Ics=100% Icu with adjustable over load setting (minimum 80% to 100%) complete all as specified and directed. Make of MCCB - ABB, Siemens, L&T, Legrand, Schneider

Supplying and fixing in repair MCCB 100 Amps with sheet metal enclosure, MCCB ,4 Pole, 50Hz , Icu= 25 KA at 415 volts, with thermal magnetic release & Ics=100% Icu with adjustable over load setting (minimum 80% to 100%) complete all as specified and directed. Make of MCCB - ABB, Siemens, L&T, Legrand, Schneider

Material and labour for checking and finding out pin point location of fault in HT underground cable 11 KV with the help of fault locating mobile machine complete all as specified and directed. Notes : (i) All T&P and other acceseries required for checking and finding of fault in cable shall be provided by theContractor (ii) Charges/rent of the fault locating mobile machine, operator, engineer, electricians etc shall be deemed to included rate quoted by Contractor. (iii) Checking and finding fault upto 03 places of same route of the cable will be considered as one Job

-Ditto- all as per item No 45 here-in- before but for LT underground cable 1.1 KV.

Supply and fix cable jointing kit suitable for 11000 Volts grade HT cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 70 to 95 sqmm. Make : 3M / M-seal/ Denson/Reychem

Ditto all as per item No 45 here-in-before but indoor termination type

Ditto all as per item No 45 here-in-before but straight through type

Supply and fix cable jointing kit suitable for 1100 Volts grade LT cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 70 to 95 sqmm. Make : 3M / M-seal/ Denson/Reychem

Supply and fix cable jointing kit suitable for 1100 Volts grade LT cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 2/3.5/4 core XLPE armoured aluminium conductor cable of size 70 to 95 sqmm. Make : 3M / M-seal/ Denson/Reychem

Trimming/cutting/chopping of tree branches all around LT/HT over conductor upto two meter and removing excavated material n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr complete all as specified and directed.

M&L for cleaning and preparation of of old painted exposed surfaces all existing steel tubular poles 9 mtr long upto finial taper plug including cross arm, clamp, bracket etc and applying one coat of aluminium paint all around the exposed steel surface with and including one coats of paint in 30 cm wide bands/ strips around the poles alternatively with black & white synthetic enamel paint up to height of 1.5 m from top of PCC coping of the pole and including writing pole No. in 8 cm height letter with black enameled paint in a circle of 20 cm dia with base of synthetic enamelled paint (colour approved by GE) on pole at above top most band compete all as specified and directed.

Releasing tension of existing OH line, of ACSR/copper conductor or GI earth wire of any size/type on existing OH line restretching properly and fixing on existing insulators on OH cross arms of poles including disconnection service connection street light fitting etc and reconnecting the same after restretching complete all as specified and directed (each conductor will be measured seperately)

S & F in repairs of sheet metal enclosure Busbar chamber 400 Amp , 4 way complete all as specified and directed Make : Legrand / Schneider/ ABB

S & F in repairs of sheet metal enclosure Busbar chamber 250 Amp , 4 way complete all as specified and directed Make : Legrand / Schneider/ ABB

Dewatering and cleanig of swimming pool ( Size of pool 50 mtr x 24 mtr x upto 18 ft depth ), balancing chamber, under ground drainage and inside overflow drainge of indide of swimming pool and removing all silt and other foreign materials including cleaning the tiles with suitable chemicals and keeping the tiles in wet condition and removing rubbish from the site complete all as specified and directed. Note :- All material such as chemical, brush, T & P shall be provided by the contractor and rates are included in quoted rates.

Dewatering and cleaning of diving tank ( appx size 3.0 mtr dia x 15.00 mtr deep ) , Trial tank and balancing chamber (UG sump) under ground drainage and inside overflow drainge and removing all silt and other foreign materials including cleaning the complete tiles with suitable chemicals and keeping the tiles in wet condition and removing rubbish from the site complete all as specified and directed. Note :- All material such as chemical, brush, T & P shall be provided by the contractor and rates are included in quoted rates.

Supply and make it ready for mixing day to day basis or as required for the following chemicals

Clorine die oxide powder ( CLO2 ) in 5 KG sealed packtank. Make- Type SCS-10K of M/S Bharti Water Pvt Ltd.

Calcium hypo chloride based in granuals form ( chlorine percentage not less than 65 % to 70 % in 45 Kg PVC bucket ). Make- M/S sree Royalseema, Hi-Strength Hypo Ltd ( Brand Puri Chlor ) or equivalant as approved by GE.

Ferric Alum

Soda ash

Copper sulphate

Dismantling/taking out defective pump from swimming pool including transpotation to civil workshop for repairing,overhauling of pumping set including dismantling into parts, and replacement of unservicable ball bearings of existing size / make , Bush , gland packing ,gaskets, air realse valve ,wornout nuts and bolts including repair and lathing to shaft ,greasing and reassembling, testing complete. ( Note : Certain spares parts of 20 HP motor only shall be paid under item No 5.

Horizontal type centrifugal pump of capacity 20 HP, three phase

Pump of capacity 5 HP, three phase

Pump of capacity 3 HP, three phase

Supply only following spare parts for Pump 20 HP capacity of Make: Kirlosker :- (Note :(i) Fixing & testing element of following item is deemed to be included under Sch `A’ item No 4 above. (ii) Quantity of under mentioned items is tentative and contractor shall have no claim on account of variation of qtys or non execution of any of the item )

MS Shaft

Roller / ball bearing

Bronze Impeller

Bush with seal

Dismantling/taking out defective electric motor from swimming pool including transpotation to civil workshop for rewinding with super enamelled copper winding wire of existing size including dismantling into parts, and replacement of unservicable ball bearings of existing size / make , wornout nuts and bolts including repair and lathing to shaft ,greasing and reassembling, testing complete

Electric Motor of capacity 20 HP, three phase

Electric Motor of capacity 5 HP, three phase

Electric Motor of capacity 3 HP, three phase

Dismantling/taking out defective submerceble pumping set capcity 10 HP from swimming pool including transportation to civil workshop for repairing,overhauling of pumping set including dismantling into parts, and replacement of unservicable thrust bearings of existing size / make , Bush , gland packing ,gaskets, seal, wornout nuts and bolts including repair and lathing to shaft ,greasing and rewinding to electric motor with copper wire of existing size and reassembling, testing complete all as specified and directed.

Supply and install in repair Centrifugal Pump ( 20 HP ) unit having bronze impellers ( Model DSM 150 ) of capacity 180 CUM per hour and 16 mtr head to match with existing pattern of Kirlosker including replacement of coupling assy complete all as specified and directed . Make - Kislosker/KSB/CG

Supply in repair chlorine gas cylender 100 Kg capacity with 100 kg chlorine gas of working pressure 2.1 Mpa with ISI marked gun metal gate valve with test certificate complete as specified and directed. Make of CylinderKansal Industries Gas/ Ubique International or equevalant as approved by GE

M&L in repair pipe Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed with all fittings and fixing material complete of make - Ashirwad/Supreme or equevalant as approved laid in trench/wall of size the following sizes :-

100 mm dia

80 mm dia

Supply and fixing in replacement CI butterfly valve PN 1.6, ISI Marked with SS-304 Disc flanged o IS-13095 including jointing material such as nuts, bolts, washers and rubber sheet etc complete all as specified and directed. Make - Upadhyay/Zoloto/Venus of size the following sizes :-

100 mm dia

80 mm dia

S& fix in repair gland packing / rubber gasket packing any type/size/shape from pumps/sluice valves/flanged etc from swimming pool/diving tank to make it serviceable complete all as specified and directed.

S& fix in repair Tyre coupling for pump set including nuts, bolts, washers etc complete to match with existing size/pattern complete all as directed for the followings:-

5 HP pumping set,

20 HP pumping set,

S& fix in repair new in repair generation, energy saving and environmental friendly long life LED street light fitting made up of pressure die-cast aluminium housing with high power LEDs as lightighting source and lens embedded,electronic driver type 60 watt LED 6000K, IP 66 complete all as specified and directed. Make Philips Cat BRP409 LED 060 CW HE NR PC S1 PSU GR or equivalent of Havells/Holonix

S& fix in repair new generation, energy saving and environmental friendly long life LED street light fitting made up of pressure die-cast aluminium housing with high power LEDs as lightighting source and lens embedded,electronic driver type 74 watt LED 6000K, IP 66 complete all as specified and directed. Make Philips Cat BRP410 LED 091 CW HE MR PC S2 PSU GR orequivalent of Havells/Holonix

S& fix in repair new generation, energy saving and environmental friendly long life LED flood light fitting made up of pressure die-cast aluminium housing with high power LEDs as lightighting source and lens embedded,electronic driver type 82 watt LED 6000K, IP 66 of make Philips Cat BVP192LED82 CW HO NB FG GR PSUorequivalent of Havells/Holonix

S& fix in repair timer switch astronomical 3 pole 08 Kw including enclosuremade ofrust proof electric shock proof, termide proof and FRR Grade SMC junction box confirming to IP 54 for street light based on lux level of natural light icluding fixing arrangements with MS flate iron clamps 50x6 mm with suitable size nuts, bolts and washers compete all as specified and directed. Make of switch: Indo Asian/ Havells/ L&T

Removing of old paint by removers scrubing from filter plant unit complete including pumping sets, pipes, fittings, sluice valves and pump foundation etc for painting and M &L for painting with one coat of superior quality synthetic paint with approved colours on exposed surface of plant etc and writing letters or figures (Block, Roman, Italic or Indian) n exc. 30 cm high and drawing stops, commas, short lines, dashes, hyphens, brackets etc. with synthetic enamel paint [SM/MES No., Capacity, Location etc.],

Horizontal Pressure Filter Plant complete at swimming pool

Pressure filter Plant at diving tank

S & F cast/ductile iron fittings such as bends (any type, radious and angle) tapes any type (straight, bend, increasing, decreasing or double, socket etc) Tee pieces, single branch, Y junction, double branch, cross (all socket or socket and spigot) collar, caps and plugs etc suitable for pipe line upto 300 mm bore complete all as specified and directed.

Supply and fixing in replacement MS spindle with check nut and water control sheet to match the existing sluice valve including jointing material such as nuts, bolts, washers and rubber sheet etc complete all as specified and directed. for the following sizes :-

300 mm dia

200/250 mm dia

M & L in repair rubber joint including suitable size nuts, bolts and washers for 200 mm bore flanged cast iron pipes and fittings complete all as specified and directed.

M/s S.M. Construction