Tender document for Proposed interior work of Girls Hostel building for PG students

Public Seating Chair. - 3 Seater Supply and installation of an SEAT/BACK SHELL: It is made from SS202 perforations.The Side Bar is made of cold rolled M.S.sheet 0.12 ± 0.013 cm thickness. The Shell is assembled on the Cross Beam with help of M8 Bolts. SIZE : 1740mmL X 660mm D X 770mm H

Centre Table With MS Understructure with Toughened Glass top, 1200 x 750 x 450H 12mm thick toughened glass top with MS powder coated understructure (25x25 tube section). Free from burrs & sharp edges

Executive's Table @ 1500Lx600Dx750HT Providing, assembling, transporting & placing/fixing of Office table as per below specifications- Table Top shall be made of 25mm thick pre-laminated particle board of Interior grade with both side laminate approved shade confirming to IS-12823:1990, edge banded with matching 2mm thick PVC lipping. Modesty Panel-Made of 18 mm thick pre laminated particle board Interior Grade with 0.8 mm thick BSL laminate board Confirming to IS- 12823:1990 with 2 mm thick PVC edge banding in approved shade. Modesty shall have T- profile Aluminium (6DTPROALU) Strip as design element for elegant look. Gable End-Made of 25mm thick pre-laminated particle board of Interior grade and approved shade confirming to IS-12823:1990, edge banded with matching 2 mm thick PVC lipping. Metal leveller shall be provided at the bottom of under structure to adjust the uneven floor level up to 5-10 mm. Pedestal-The pedestal unit size of 400 (w) X 450(d) X 710 (ht)mm. The pedestal units shall be made out of 18 mm thick Interior Grade prelaminated MDF board for Body shell, Drawer Facia and Back of Storage in approved shade confirming to IS-14587:1993, Edge banded with matching 2 mm thick PVC lipping. The Pedestal construction is BOX-BOX-FILE type. The pedestal Unit should be provided with Two Nos of drawer 140mm to 150 mm height and remaining space should be made third drawer, all the drawer should be slide with s drawer double telescopic channel. Pedestal shall have centralized locking system etc. complete.

Providing & Arrangemnt of High Back Chair - Providing, assembling, transporting & placing in position High Back Executive revolving office chair with the specification -Chair shall have mesh in back and High-quality PU foam cushion in the Seat upholstered with high quality of Leatherette. Chair shall have adjustable arm rest with adjustment up to 60 mm. Arm shall made of Polypropylene and Chair shall have PU Pad armrest with 3-Dimensional Movement (Up-Down, Left and Right). Chair shall have adjustable lumber support to adjust the back for extra comfort. The lumbar support consists of polypropylene pad with moulded polyurethane foam & covered with Leatherette. Lumbar pad has an adjustment of 30 mm in height with adjustable tilting mechanism is designed with the following features.360-degree revolving type. Chair shall have Advance Bio synchro mechanism with 1 position locking facility at difference level. Seat shall made of 12mm thick hot-pressed ply covered with high density moulded foam with the density of 45-50Kg/Cu M with the thickness of 50 mm and seat shall be upholstered with High Quality of Leatherette and back shall come with high quality of Mesh. Chair shall have headrest covered with Leatherette with pivot adjustment. The size of seat and back are, back size-480Wmmx660Hmm and Seat size470Wmmx490Dmm.Chair shall have BIFMA Level3 gas lift and height adjustment up to 120 mm. Chair shall have twin wheel castor star base of PCD Ø 700. Casters Ø50mm made of Nylon and should be 5nos castor. Overall Dimension - 700 W x 730 D x 1190/1310HT mm.

Supply and installation of a Mid Back Visitor Chair having cushioned seat and Mesh back upholstered with good quality fabric of approved color. The seat shall be made of moulded foam with integrated lumber support having contoured shape at seat back for better comfort. The seat shall be made up of 12 ±0.1mm. thick hot-pressed plywood upholstered with moulded foam and fabric. The seat back frame shall be made of SS202 pipe having dimensions of 16mm dia with thickness of 1.6mm. The frame shall be upholstered with nylon mesh and thereafter further upholstered with fabric upholstery for better comfort. The HR polyurethane foam shall be moulded with density= 42±2 kg/m3. The chair shall have fixed PP armrest. The seat inner shall be provided with 12mm thick bentwood ply for fixing of mechanism. Seat upholstery shall have thickness of 340 GSM, 100 % polyester. Seat bottom shall be provided with non woven fabric having thickness of 100GSM. The chair shall be provided with cantelever C-frame type understructure made of 16mm dia MSERW tube having thickness of 1.6mm. The chair understructure shall be epoxy powder coated with minimum thickness of 50-80 microns. Overall Dimensions: 600L X 580D X 940H mm

Supply and installation of a Mid Back Chair having cushioned seat and back upholstered with good quality fabric of approved color. The seat shall be made of moulded foam with integrated lumber support having contoured shape at seat back for better comfort. The seat shall be made up of 12 ±0.1mm. thick hot-pressed plywood upholstered with moulded foam and fabric. Back made of Nylon Mesh. The HR polyurethane foam shall be moulded with density= 42±2 kg/m3. The chair shall have BIFMA compliant Class 3 gas lift for seat height adjustment with an adjustment stroke of 100mm. The chair shall be provided with Centre Tilt mechnism with upright position locking, 360 degree revolution, Tilt tension adjustment, Nylon Castors along with Nylon Star Base. The twin wheel castors shall be injection moulded in Black Nylon. The chair shall have PP fixed armrest. Overall Dimensions - 595mm(W) x 620mm(D) x 1020mm(H)

Supply and installation of a Full Height Office Storage which shall have the overall size of 900W x 450D x 1950H. The storage shall have complete knockdown construction wherein the body, shelf and doors shall be made of high quality CRCA (Cold Rolled Close Annealed) sheet. The body, shelf and door of the almirah shall have minimum thickness of 0.8mm with reinforced supports. The storage shall be provided with 4nos of adjustable shelf. The complete structure shall be epoxy polyster powder coated with minimum thichness of 50microns. The storage shall be provided with lock housing made of ABS with three point locking position with master key combination. Lock shall be made of ABS, Zinc Alloy core, steel cam with key angle rotation of 180 degree, lever rotation of 90 degree. The storage shall have seamless handle for efficient and safe operation with single tone color finish across storage for elegant look. The door shall move on nylon bush and milled pin regarless of it's own weight with smooth and quite operation. The storage shall have minimum net weight of 66kg and shall be provided with plinth height of 7-20mm. The storage shall be provided with skirting of 60mm height. It shall provided with Plinth Screw arrangement to adjust the base on floor.Cupboard having mirror pasted on Door,Drawer and locker unit inside the cupboard. All material used for manufacturing of almirah shall be of reputed make such as SAIL, TATA Steel, JSW, etc.

Study table with single drawer: Providing and fixing Study table of SIZE -900mm L x 600mm W x 750H Table top made up with 18mm PLPB, undertrucure will be made up with 25.4x25.4 x1.2 mm thk. Table is With single drawer,Storage drawer material is 0.6 and 0.8 mm CRCA knockdown cunstruction With 10 tank powder coating processed,with plastics handle.

Supply and Installation of Single Bed with size=1950 L x 900W x 720H mm, Bed without headrest height will be 450mm, vertical leg 50 x 25 x 1.2 mm thk . And sq. tube 25 x 1.2 mm thk, Horizontal beam -50 x 25x 1.6 mm thk, horizontal support membar -19 x 9 x1.2 mm thk, Matress plank - 12mm thick prima quality echorecyle plastic board, Bed is with head bord, Made up with the material of 18 mm PLPB bed is without legboard . Construction for bed is Knock-down construction

Providing & fixing 8 Seater Dining Table: Top shall be of Stainless Steel brushed with PLB insert for Durability . Easy to maintain hygiene . The Understructure shall be made of 50.8 mm x 50.8 mm 1.2 mm thick powder coated ERW tubes at base which are welded and fixed to the Top with screws . Tubular stiffeners that are provided between the two vertical frames . The tubes shall be closed with plastic caps . Level adjustment shall be provided to take care of unevenness in floor including Foldeble Stool etc. complete.