Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance H NO 1 7 1 79 1 ROAD NO 7 REDDY ENCLAVE TEMPLE ALWAL SECUNDERABAD 500 010 | HYDERABAD | TELANGANA | 500010 | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance H NO 1 16 70 SAI NAGAR COLONY ALWAL SECUNDERABAD 500015 | HYDERABAD | TELANGANA | 500015 | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹4 L
EMD Value
₹80,000
Closing Date
14 Feb 2024, 6:00 pmClosed
CWE (ARMY) SECUNDERABAD
Commander Works Engineers Mudfort, MES Office Complex Secunderabad-500 003
REPAIR REPLACEMENT OF ROOF SHEET TOILETS SANITARY FITTINGS FLOORING PLASTERING ETC IN NML OML AREA UNDER AGE BR(S) NO I UNDER GE (S) SECBAD
2024_MES_638086_1
82109
Open Tender
Civil Works
Item Rate
180 days
Secunderabad
As per NIT
7 documents required · 7 mandatory
₹500
GE (South) Secunderabad
₹80,000
Yes
27 Feb 2024
18 Jan 2024
21 Feb 2024
18 Jan 2024
14 Feb 2024
31 Jan 2024
Amount
Dismantling of Asbestos cement (corrugated, semicorrugated and Transulent sheet etc) sheets in roof covering incl ridges complete all as specified and directed.
Dismantling timber scantling 40 sq cm and over in any position complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
M&L Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as on roof covering/ridges fixed with self tapping screws complete all as specified and as directed.
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Grade Fe 410 -W (Gde E- 250) quality A complete all as specified and as directed
Demolition of cement concrete (un-reinforced ) in ground floors and pavings not exceeding 15cm thick(below or above ground level ) complete all as specified and as directed
Dismantling floor hearth wall tiling including cement mortar bedding (but not backing) including rubbish off the premises complete all as specified and as directed.
M&L for 25 mm thick plain cement concrete 1:2:4 type B-0 (12.50 mm graded aggregate ) as in floors complete all as specified and as directed.
M&L for 75mm thick plain cement concrete in (1:3:6) type C2 (using 40 mm graded aggregate) as in plinth protection finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.
M&L for Non - skid Ceramic jointfree tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.
M&L for Non - skid Ceramic joint free coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting/dados etc. over 10mm thick rendering in CM (1:4) on walls such as backing of tiles complete all as specified and as directed.
M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.
M&L for Glazed ceramic coloured tiles of size 450x300x6 to 7 mm thick wall tiles set and jointed in neat cement slurry and pointed in white/coloured cement to match with the colour of tile over 10 mm thick plaster in CM 1:4 as in skirting / dados etc, complete all as specified and as directed.
Demolition of cement concrete (un-reinforced ) Roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work complete all as specified and as directed..
M&L for plain cement concrete 1:5:10 type E-2 (using 40 mm graded aggregates) as in floor filling complete all as specified and as directed.
Rendering 15mm thick in CM 1:3 using water proofing compound as per manufacture instruction, finished even and smooth with out using extra cement as in sunken floor complete all as specified and as directed. Note: WPC will be measured and paid separately
M&L for priming on plastered surfaces with bituminous primer and applying heavy treatment for severe conditions using glass fibre base bitumen felt, grade 2 in 100 mm overlaps both longitudinally and transversely by torch bonding as in sunken floor ( bottom and vertical surfaces ) complete all as specified and as directed
Supply only water proofing compound complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each including steel windows etc complete all as specified and directed.
M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions complete all as specified and directed.
M&L for Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out of M.S tube for top & bottom rails. M.S Srame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing complete all as specified and directed.
S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin type C-21 anodised and fixed complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified and directed.
S&F in repairs vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity,flush pipe of polythylene of low or high density or PVC 32 mm dia , PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repairs Vitreous china wash hand basin white flat back size 550x400mm including brackets, CP pillar cock (fancy type )of 15mm bore, CP waste fittings 32mm, incl waste pipe complete all as specified and as directed.
S&F in repairs Vitreous china orrisa pan squatting pattern 580 X 440mm with integral foot rests including P or S trap, PVC low level flushing cistern 10 ltrs capacity complete all as specified and directed.
S&F in repairs PVC low level flushing cistern 10 ltrs capacity white , with inlet ball valve , float and handle including brackets , Flush pipe of polythylene of low or high density or PVC 32 mm dia , PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repairs 125 mm dia brass chromium plated shower rose with swivel joints complete all as specified and as directed.
S&F in Repairs Pillar taps fancy type , cp brass chromium plated screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly–nuts, screwed for 15 mm bore iron pipe complete all as specified and as directed.
S&F in Repairs fancy type bib taps,cp brass chromium plated with capstan head, screwed down, screwed for 15 mm bore iron pipe complete all as specified and as directed.
S&F in repairs stop valves, cp brass, chromium plated, fancy type with capstan head screwed down, high pressure, screwed both ends for 15 mm bore iron pipe or for unions complete all as specified and as directed.
S & F in repair 15 mm dia stop valves cp brass chromium plated with long shank (concealed), screwed both ends for iron pipe complete all as specified and as directed.
S&F in repairs angular stop valve cp brass chromium plated screwed for 15 mm bore iron pipe complete all as specified and as directed.
S&F in repairs Tubular Towel rail 20mm dia, D type, 60cm long between flanges of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and as directed.
S&F in repairs 20mm dia CP decorative type draphery curtain rods with brackets of approved pattern and quality complete all as specified and as directed.
Demolition and breaking up drain AC pipes/PVC pipe set in cement mortar of any size complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed , in any length with rubber ring joints, fixed to walls bore of the pipe 110mm complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed , in any length with rubber ring joints, fixed to walls bore of the pipe 75mm complete all as specified and as directed.
S&F PVC (SWR) bends 110mm complete all as specified and as directed.
S&F PVC (SWR) bends 75mm complete all as specified and as directed.
S&F in repairs Plastic water closet seat, black or white closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and as directed.
M&L for complete removal of existing treatment (using removal machine) including preparing surfaces of wall and applying two coats of weather proof exterior emulsion paint (APEX ULTIMA or equivalent of Berger/Nerolac) over two coat putty over a coat of primer upto two storeys of building height including filiing all crack with approved crack filler complete all as specified and as directed. (Note : Two coat of APPEX will be applied through by Mechanically spray gun method)
M&L complete removal of existing treatment on wall surfaces and applying two coats of oil bound distemper over and including wall care putty 3mm thick and a coat of alkali resistant primer complete all as specified and directed.
M&L Preparation of plastered or unplastered old decorated surfaces of walls and applying one coat of white wash complete all as specified and directed.
Supply and laying of CPVC pipes 16mm outer dia SDR 11 & plain CPVC SDR 11 fittings in walls and trenches including taking down steel tubing complete all as spd and directed
Supply and laying of CPVC pipes 20mm dia SDR 11 & plain CPVC SDR 11 fittings in walls and trenches complete all as spd and directed
G SATISH REDDY AND CO
abhilasha constructions
R G NAIDU CIVIL CONTRACTOR AND BUILDERS
Palla Thrinatharao
M/S C MALLIAH & SONS
harshraj and co
R MURUGARASU
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .