CONSTRUCTION OF A WUZU KHANA NEAR JAMIA MASJID AT GUNGOO BLOCK PULWAMA

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:

P/laying of precast PCC rings for soakage pit.

P/laying of precast Top lid

Providing and laying of stone soling hand packed including all carriages and lifts

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:4.4.5 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :6.1.5 Cement mortar 1:6 ( 1 cement : 6 coarse sand) Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 5.1.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level 5.22.1 Mild steel and medium tensile steel bars

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in￾charge.22.2.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. shutter

CEMENT PLASTER (IN COARSE SAND) 12mm Cement plaster of mix: 13.4.1 1 : 4 ( 1 cement : 4 coarse sand)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Centering and shuttering including strutting, propping etc. and removal of form work for:4.6.1 Foundations, footings, bases for columns

Centering and shuttering including strutting, propping etc. and removal of form for:5.9.3 Suspended floors, roofs, landings, balconies and access platforms.

Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with: 11.33.5 Black zebra

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) .11.29.1 Light shade using white cement 11.29.2 Medium shade using 50% white cement and 50% ordinary cement.11.29.3 Dark shade using ordinary cement. 11.29.4 Ordinary cement without any pigment.

carriage of all materials by mechnical transport

carriage of bricks by mechnical transport

Providing and fixing of 50 liters Gesyers of approved band like Racold, Kohler,jaquare etc including all assessories like angle value etc complete job

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.

Providing and fixing of PVC pipes of approved make ( B Grade pipe of reputed make phnolex made) 100 mm dia

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in￾charge.19.2.1 Internal work-exposed on wall with clamps at 1.00 meter spacing 19.2.1.5 PN-16 pipe , 40mm OD(SDR-7.4) 50mm

32 mm connections of water tank

Providing an dfixing of ball Value with CI wheel of approved brand and quality

Providing and fixing 15 mm nominal bore cp brass bib cock of approved qualitycnforming to IS: 8931

Proiing and ixing of floor trap 75 mm

Dowlel &5 mm

Towel Rod

Soap dish holder

Providing and fixing 15 mm nominal bore cp brass valve for basin mixer and geyser points of approved make conforming to IS:89

Provision for signboard and photographs and other unforseen items.