SPECIAL REPAIRS TO QTR NO P-5/4 AT JALIPA MIL STN UNDER GE (A) BARMER

Amount

Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises complete all as specified and as directed.

M&L 15 mm thick, plastering in CM 1:4 on stone masonry surfaces ( external wall surfces) finished fair and even with out using extra cement including mixing with water proofing compound ( WPC) as per manufacturer instructions complete all as specified and as directed. Note :- WPC will be measured and paid separately as supply only.

M&L 15 mm thick, plastering in CM1:6 on stone masonry surfaces ( internal wall surfces) finished even and smooth with out using extra cement complete all as specified and as directed.

M&L plastering 5 mm thick in CM 1:3 on concrete surfaces of ceiling , finished even and smooth without using extra cement complete all as specified and as directed.

Preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

Preparation of old painted external surfaces of walls and applying one coat of cement base paint complete all as specified and as directed.

Preparation of new plastered or unplastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified and as directed.

Preparation of old white washed surfaces and applying two coats of white wash on ceiling surfaces complete all as specified and as directed.

Preparing new plastered or unplastered surfaces and applying with wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper over one coat of primer on walls complete all as specified and as directed.

Complete removal of existing treatment of any description on walls and applying with wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper over one coat of primer on walls complete all as specified and as directed.

Taking down Shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed.

Taking down Shutters of any description and refixing the shutters in the same opening of any description exceeding 1.00 Sq.m and not exceeding 2.00 Sq.m each after easing and adjusting complete all as specified and as directed.

Factory made solid with particle board core PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded pre lam PVC sheet on the front face & 2mm prelam PVC Sheet on back face including fixing in frame at site as per specification & drawing as shown in SSR part II complete all as specified and as directed.

S&F 35 mm thick second class hard wood factory made plain, framed, panelled shutters, with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Taking down chowkats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed .

Pressed steel frames of size 165X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate,etc., complete all as specified and as directed.

Pressed steel frames of size 105X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate,etc., complete all as specified and as directed.

M & L for two coats of synthetic enamel paint over one coat of red Oxide zinc chrome primer on new steel surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

Taking down chowkats or frames (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified and as directed.

M&L 35mm thick factory made 2nd class HW glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and as directed.

S&F in repairs galvanised mild steel wire cloth, 0.40 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or GI wire staples complete all as specified and as directed.

S&F galvanised mild steel wire cloth, 0.40 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or GI wire staples complete all as specified and as directed.

S & F in repairs 200 mm long, brass ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed.

Preparation of new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed .

Preparation of old painted wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed .

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications complete all as directed .

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed.

S&F 150mm size aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm size aluminium anodised handles, caste type, complete all as specified and as directed.

S&F 100mm size butt hinges extruded aluminium alloy, with mild steel hinge pin, anodised type B-21 complete all as specified and as directed.

S&F 250 mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed .

Taking down steel windows and ventilators ( glazed / fly proof) of any description complete all as specified and as directed.

S&F Factory made steel ventilators with top hung shutters including box type hinges, steel peg stay complete all as specified and as directed.

S& F in repairs MS powder coated curtain rod of 28mm dia, including 8 nos PVC rings per running meter of curtain rod complete all as specified and directed.

S& F in repairs stainless steel brackets for 28 dia CP stainless steel for curtain rod complete all as specified and directed.

M&L plastering 15 mm thick in CM 1:3 on surfaces of chajja and facia down ward / up ward face etc., as in isolated widths or in widths not forming part of general plastring such as bands, sunk panels, cornices, skirtings, drip moulds and other similar work including cutting edges, all mitres and stopped ends and necessary scaffolding as required , complete all as specified and as directed.

Pre-cast cement concrete block masonry using PCC, 1:3:6, type C-1 solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6, straight or curved on plan exceeding 6 m mean radius including demolition of block walling complete all as specified and as directed.

Granite slab 18 to 20mm thick machine cut, factory polished, Jet Black colour, as in steps, jambs, pillars, window cills, cooking platform, and like bedded and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the shade of granite stone including half rounding granite slab edges over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

Dismantling of cast iron pipes of 100mm internal dia including fittings, jointed in cement mortar complete all as specified and as directed.

Dismantling of cast iron pipes of 75mm internal dia including fittings, jointed in cement mortar complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 100mm bore, in any length with or without ears, jointed with cement sand mortar, fixed to walls with and including MS clamps complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 75mm bore, in any length with or without ears, jointed with cement sand mortar, fixed to walls with and including MS clamps complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 100mm bore, in any length with or without ears, jointed with cement sand mortar, laid in trenches or in floors complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 75mm bore, in any length with or without ears, jointed with cement sand mortar, laid in trenches or in floors complete all as specified and as directed.

S & F cast iron vent cowls suitable for 100mm dia pipes complete all as specified and as directed.

S & F cast iron branch pieces with ovall access door, single [equal or unequal] ordinary or inverted [spigot and socketed type] or with parallel branches suitable for 100mm dia pipes complete all as specified and as directed.

S & F cast iron branch pieces with ovall access door, single [equal or unequal] ordinary or inverted [spigot and socketed type] or with parallel branches suitable for 75mm dia pipes complete all as specified and as directed.

S & F cast iron bends with ovall access door [any radius], diminishing pieces or tapers [larger bore measured] of 100mm bore, for cast Iron soil / waste / vent pipes complete all as specified and as directed.

S & F cast iron bends with ovall access door [any radius], diminishing pieces or tapers [larger bore measured] of 75mm bore, for cast Iron soil / waste / vent pipes complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and as directed.

Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and as directed.

S&F GI tubing (ISI marked) 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floorscomplete all as specified and as directed.

S&F GI tubing (ISI marked) 25mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floorscomplete all as specified and as directed.

Re fixing / Re laying old 15mm bore GI tubing and connections in new or old position including provision of new GI fittings ( as ordered) and fixed complete to walls and ceiling or laid in floors complete all as specified and directed .

Re fixing / Re laying old 25mm bore GI tubing and connections in new or old position including provision of new GI fittings ( as ordered) and fixed complete to walls and ceiling or laid in floors complete all as specified and directed .

S&F 500 ltrs capacity rotational moulded polythene water storage tanks white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including ball valves for 20mm bore pipe, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (minimum weight 210 gms) and taking down old tank complete all as specified and as directed.

S&F in repair stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for 25 mm bore iron pipe or for unions complete all as specified and as directed.

S&F in repair, fancy type, chromium plated, bib tap, long body cast copper alloy with spindle,half turn with screwed down, screwed for 15 mm bore iron pipe complete all as specified and as directed.

S & F in repairs vitreous china ware wash hand basin, white, flat back of size 550 mm X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 450mm long including pillar tap, cast copper alloy, chromium plated, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

S&F in repair CP, fancy type, stop valves / angle cock, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for 15 mm bore iron pipe or for unions complete all as specified and as directed.

S & F in repairs white vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm with integral foot rests andPVC 'P' or 'S' trap including provision of cement concrete bedding 1:5:10 type E2 complete all as specified and as directed.

S&F in repairs 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and as directed.

S&F in repairs, PVC connections 450mm long, 15mm size with brass fly and washers on both ends complete all as specified and as directed.

S & F in repairs stainless steel kitchen sink with drainage board, made of stainless steel 1 mm thick, with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, over all size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

S & F in repairs stainless steel plate rack of size 780mm X 900mm X 250mm of approved pattern made out of stainless steel sheet 18 gauge with round 8mm dia rods complete all as specified and directed.

S & F in repairs, brass chromium plated shower rose of size 125mm with or with out swivel joints fixing to steel pipes complete all as specified and as directed.

S & F in repairs 75mm bore cast iron nahani trap with grating including jointing to waste pipe, fixed in cement concrete type B1, 1:2:4 complete all as specified and as directed.

Demolition of wall tiling of any description including cement mortar bedding / backing coat and removing rubbish to out side MD Land complete all as specified and as directed.

PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregat,25mm thick in sub base of flooring complete all as specified and as directed.

M & L coloured glazed ceramic tiles of size 450mmx350mmx7mm/ 450mm x 300mm x 7mm thick on vertical surface of wall over and including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white cement / coloured cement to match the tiles complete all as specified and as directed.

M&L non skid ceramic tiles, coloured, of size exceeding 0.06 Sq.m and not exceeding 0.11 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

M&L non skid ceramic tiles, coloured, of size exceeding 0.18 Sq.m and not exceeding 0.38 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including 15mm thick backing coat in CM 1:6 complete all as specified and as directed.

M&L non skid ceramic tiles, coloured, of size exceeding 0.18 Sq.m and not exceeding 0.38 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in skirtings/dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including backing coat of 10 mm thick in cement mortar 1:4 complete all as specified and as directed.

S & F in repairs sheet glass shelf aasembly consisting of 5.5mm thick sheet glass shelf 120 mm wide with chromium plated bracket guard and railing of 600 mm long complete all as specified and as directed.

Machine cut kota stone slab flooring using 20 to 25mm thick slabs, laid and jointed with grey cement slurry mixed with a admixture of pigment to match shade of slab including rubbing and polishing to smooth mirror finish all to required sizes, the size and design / pattern of slabs shall be as directed, including diagonals, inlays, borders, margins in two or more shades of slabs including rounding to edges of kota stone screed bed or bedding layer of mortar 15 mm thick in cement Mortar 1:6 complete all as specified and as directed.

All as per Sl item No.77.00 above but as in riser of steps, skirting, dado etc, including 10mm thick backing coat of in cement mortar 1:4 complete all as specified and as directed.

Preparation of surfaces of roof slab by brushing with wire brushes to remove loose / dirt materials and sweeping with brooms or gunny bags or mechanical device etc., and applying neat cement slurry with 3.0 KG of cement per Sq.m area with mixing of liquid water proofing compound as per manufacturer instructions complete all as specified and as directed. Note :- WPC will be measured and paid separately as supply only.

Plain cement concrete, 1:2:4 type B0 using 12.5mm graded stone aggreage, 40mm thick with mixing liquid water proofing compound as per manufacturer instructions, as in levelling courses of roof / chajja / kerbs,rounded or chamfered on edges including necessary form work complete all as specified and directed. Note :- WPC will be measured and paid separately as supply only.

Supply only liquid water proofing compound

Screed 10 mm thick in CM 1:3 on roof for laying of water proofing treatment mixing with water proofing compound as per manufacturer instructions complete all as specified and directed. Note :- WPC will be measured and paid separately as supply only.

Plain cement concrete, 1:2:4 type B0 using 12.5mm graded stone aggreage, as in coved fillets of radius 75mm provided at junction of roof and parapet / vertical surfaces, padding concrete to achieve slope as required , platform for water tank on roof slab etc., including necessary form work complete all as specified and directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including rough finished surfaces complete all as specified and directed.

Use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide includingrough finished surfaces complete all as specified and directed.

Erection and removal of structural steel such as Joist, channel or Tee section fixed independently for supporting members of existing structure during the repair complete all as specified and directed. NOTE:- (i)This item is required to support the existing RCC roof members during executed repair work. (ii) Retrived steel materials will be property of the contractor.

Dismantling portions of reinforced cement concrete / chipping of un sound concrete to a depth / thickness 25mm to 100m ,averaging 62.5mm as in roofs , floors, beams, columns, stair cases, landings, chajjas, parapets etc., and similar suspended work ( other than ground floors) and removing rubbish to out side MD land complete all as specified and as directed.

Preparation of surfaces of RCC column, beam, chajja, roof drops, soffit of slab by removing existing cement plaster, hacking out the surface of RCC work for key to a depth of 15mm by gentle chipping manually to make surface rough and thoroughly clened with air and water jet complete all as specified and directed.

Preparation of exposed surfaces of rusted steel reinforcement with metal wire brush, cleaning the rusted surfaces free from loose rust and application of rust remover cum passivator painted with brush on rusted reinforcement @ 0.20 kg per sqm of surfaces of existing reinforcement and removing rust with flex after 24 hrs of application of rust remover with wire brush, sand paper and throughly washed with water through pressure jet and allowing it dry to complete all as specified and directed. Note :- Area of cleaned reinforcement steel shall be measured for the purpose of payment.

Preparation of surfaces of steel reinforcement by cleaning throughly and applying zinc - rust agent as per manufacturer method of application to rebar corrosion protection system to reinforcement @ 3.75 kg per sqm surface of steel reinforcement in two coats complete all as specified and directed.

M&L for augmentation of RCC by using Dr. Miracle system of M/s AAYKA polymers or equivalent of M/s FOSROC / Dr. Fixit, by pressure grouting @1 to 2 kg per sqm complete all as specified and directed.

M&L for providing AQUAVENTS of M/s AAYKA polymers or equivalent of M/s FOSROC / Dr. Fixit by moisture release system in roofs complete all as specified and directed.

M&L for providing AQUAVENTS of M/s AAYKA polymers or equivalent of M/s FOSROC / Dr. Fixit by moisture release system in walls complete all as specified and directed.

M&L for polymer modified polymer coat with MRP glass membrane on roof surface by using AQUAPROOF 102 of M/s AAYKA polymers @ 4 kg per sqm complete all as specified and as directed.

M&L for ESKOO heat reflective cum water proofing system @2 kg per sqm of M/s AAYKA polymers or equivalent of M/s FOSROC / Dr. Fixit complete all as specified and as directed.

M&L for micro cement concrete of M/s AAYKA polymers or equivalent of M/s FOSROC / Dr. Fixit , pre packed single component, chloride free , sulphate free, non shrink, free flow, self compacting / ready to use after mixing of required quantity of water as per manufacturer instructions is required to achieve high strength, dual shrinkage, compensated, micro complete repair with compressive strength of 40 Mpa at 28 days complete all as specified and as directed.

S&F 12mm TS dowel pins/ staple/ shear pins M/s AAYKA polymers or equivalent of M/s FOSROC / Dr. Fixit including drilling holes in concrete and epoxy for grouting the pins complete all as specified and as directed .

S&F 6mm TS dowel pins/ staple/ shear pins M/s AAYKA polymers or equivalent of M/s FOSROC / Dr. Fixit including drilling holes in concrete and epoxy for grouting the pins complete all as specified and as directed .

M&L for cement concrete parking tiles of 30cmx30cmx10 mm thick, set, jointed and pointed in white cement and pigment match to colour, laid over and including screed bed or bedding layer of 20mm thick in CM 1:6 complete all as specified and as directed. Make :- Johnson ( Endura) or equivalent make as approved by GE.

Demolition of reinforced cement concrete such as roof, floor slab, beams, stair case, landing, chajjas and similar suspended work and removing rubbish to out side MD land complete all as specified and as directed.

RCC 1:1½:3 type A1 by using 20mm graded stone aggregate as in slabs supported on walls, beams and colunms in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

RCC 1:1½:3 type A1 by using 20mm graded stone aggregate as in colunms, pillars, piers, posts and struts including necessary form work complete all as specified and directed.

RCC 1:1½:3 type A1 by using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span including necessary form work complete all as specified and directed.

S & F rolled mild steel sections of grade Fe - 410 - S as in main and cross beams, hip and jack rafters, purlins where connected to common rafters, fixed with angle cleats etc complete all as specified and as directed.

TMT steel bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

TMT steel bars of 5mm to 10mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

Cutting openings through brick walls built in cement mortar for doors, windows and other openings or enlarging existing openings or converting window in to door openings etc or cutting out defective masonry for underpinning including providing, fixing and removing, shoring, cleaning and stacking bricks and removing surplus to store and rubbish to out side MD land complete all as specified and as directed.

Forming jambs etc to openings with including cutting, toothing and properly bonding in to old work including facing and pointing [if necessary] to match existing work, complete built in Cement Mortar 1:4 complete all as specified and directed.

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc . removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed.

Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including heavy duty drawn through and including in 20mm dia PVC rigid conduit with all accessories complete concealed in wall/roof/floor etc, ISI marked with modular metal flush box of suitable size for mounting of modular switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light / fan / bell point controlled by one, one way switch complete all as specified and directed .

All as per Serial Item No. 110 above but one 3/5 pin socket outlet 5 Amps on independent board complete all as specified and as directed.

All as per Serial Item No.110 above but for one 3/5 pin socket outlet 5 Amps on the same board with other switches complete all as specified and as directed.

All as per Serial Item No. 110 above but for one light point controlled by two Nos. of, two way switches complete all as specified and as directed.

All as per serial Item No.110 above but for 15 Amps 5/6 pin socket point on independent board with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire complete all as specified and directed .

Ceiling rose, 3 phase / PVC / Polycarbonate, isolated bodycomplete all as specified and as directed.

Modular switch single pole 1way, 6 Amps 1 Module complete all as specified and directed.

Modular switch single pole 1way, 16 Amps 1 Module complete all as specified and directed.

Modular switch single pole 2way, 6 Amps 1 Module complete all as specified and directed.

Modular bell push, flush type, 5 Amps, 230 Volts complete all as specified and as directed.

Modular socket, 6 amps 2/3 pins combined 2 module complete all as specified and directed.

Modular socket, 6/16 amps 2/3 pins combined 2 module complete all as specified and directed.

Modular fan regulator, step type 120 watts, 2 module complete all as specified and directed.

Modular white cover plate with frame suitable for 1 Module complete all as specified and as directed.

Modular white cover plate with frame suitable for 3 Module complete all as specified and as directed.

Modular white cover plate with frame suitable for 4 Module complete all as specified and as directed.

Modular white cover plate with frame suitable for 6 Module complete all as specified and as directed.

Modular white cover plate with frame suitable for 8 Module complete all as specified and as directed.

S& F integrated LED channel tube light fitting, 1X20W, 230V, energy efficient box type, integral, sleek polycarbonate with white acrylic cover epoxy powder coated with fluorscent tube light 1X20W complete with all accesories internally pre wired and connectiong up with twin core twisted flexible copper conductor of suitable size complete all as specified and as directed. Make :- Cat part No. DMLN1LT8-16 of make CG or Techno commercially equivalent model in make of Philips / Havells / Bajaj

S&F LED light fitting 1X10W bulk head luminaries, with lamp holders with all accesories internally and connectiong up with twin core twisted flexible copper conductor of suitable size complete all as specified and as directed. Make : Havells Cat Part No. LHEOAOP7UZ6W010 or techno commercially equivalent model of make Bajaj/Philips/CG

S&F lamp Holder, insulated body with back plate, 230 Volts for batten fittings complete all as specified and as directed.

Taking down existing old panel for electronic meter from the existing position including preparation of surfaces and painting with synthetic enamel paint as per existing marking Qtr Nos and replacement of old damaged sheet for recording meters/ glass repairs to damaged portion and refixing in its position with suitable frame with nut and bolts complete all as specified and as directed.

S&F bell, ding dong / multi music type, AC, 230 volts, single pole complete all as specified and as directed.

Supply, installation and testing of tamper proof electronic energy meter, single phase, two wire, 240 volts, AC,10-40 amp rating with LCD disply and suitable to measure , KWH, volts,ampere,KW, PF with special features like TOD,tamper logging, optical communication port and disply in absence of power, ISI marked, accuracy as per IS-13779, polycarbonate body totally enclosed in and including transparent body cover hinged type, sealing the meter terminal and connection complete all as specified and directed

M&L submain wiring with two runs of 4 sqmm with one run of 4 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through in and including heavy duty non metallic PVC rigid conduit of 25mm dia with accessories fixed on wall / ceiling and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 4 sqmm and one run of PVC conduit shall be measured as one length for the purpose of measurement.

M&L submain wiring with two runs of 6 sqmm with one run of 6 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through in and including heavy duty non metallic PVC rigid conduit of 25mm dia with accessories fixed on wall / ceiling and connected to common earth dolly complete all as specified and directed. Note :- Three runs of 6 sqmm and one run of PVC conduit shall be measured as one length for the purpose of measurement.

S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 8 way, 240V for fixing MCB's complete all as specified and as directed.

S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,TPN 4 way, 415V for fixing MCB's complete all as specified and as directed.

S&F single pole and neutral enclosure with two pin and earth and socket modular type with one MCB SP 20 Amps complete all as specified and as directed.

S&F MCB TPN ‘C’ Curve 10KA, 63 amps, 415V complete all as specified and directed .

S&F MCB SPN ‘C’ Curve 10KA, 40 amps complete all as specified and directed .

S&F MCB SP ‘C’ Curve 10KA, 6 to 32 amps complete all as specified and directed .

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel including dismentling of existing earth pit etc complete all as specified and as directed. NOTE :(i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-( ii) Item includes the cost of GI pipe up to 7.5m for protection of earth wire. Any variation in length beyond 7.50 m shall be measured separately.(iii) Item includes cost of lead wire up to 7.5 m Any variation in length beyond 7.50 m shall be measured separately.(iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

S&F earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required for galvanized earth lead wire 4 mm dia complete all as specified and directed.

Taking down ceiling fan ,any size and sweep from its position ,dismantling for servicing including removal of bearing, bushes, condenser, connector, flexible cord, split pin etc if required removing old grease and refill fresh, lubricating bushes along with new washers, replacing of burnt winding, ball bearing, oiling and making is serviceable after rectifying all defects in all respect including spray painting of ceiling fan, fan blades, down rod, canopy etc with a coat of synthetic enamel paint of approved colour and quality and marking MES No. etc with black paint and depositing to E/M store yard complete all as specified and as directed .

S&F 1200mm sweep ceiling fan minimum three star rating with 4step regulator complete all as specified and as directed.

S&F, Exhaust fan of 300 mm sweep with louvers complete with bracket frame and making necessary electric connection complete all as specified and as directed .

M.D. CONSTRUCTION CO.

Kusum Traders

vinayandsons