REPAIRS TO PCC FLOORING, TILES AND PLUMBING WORK INSIDE DRDL/ASL BUILDINGS UNDER AGE B/R-I, HYDERABAD

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding /backing coat and removing rubbish off the MoD premises, complete all as directed.

Demolition of cement concrete of any description not otherwise specifically provided for as in floor/foundation etc.,removing debris outside MoD land complete all as directed.

M&L brick work with sub class 'B' bricks (with old size bricks) straight or curved on plan exc 6.00m mean radius, built in CM (1:6) including demolition of existing masonary complete all as specified and directed by Engineer-in-Charge.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick built in CM 1:4 including demolition of existing masonry complete all as specified and directed by Engineer-in-Charge.

M&L for walling of random rubble masonary Secunderabad type, well bedded, bonded and solidly hearted built in CM (1:4), including demolition of existing masonary complete all as specified and directed by Engineer-in-Charge.

All as per Srl Item No.05 but except stone

M&L PCC 1:4:8 type D2 using 40mm graded stone agg as in flooring, foundation and mass filling, complete all as specified and directed by Engineer-in-Charge.

M&L PCC 1:2:4 type B-0 (using 12.5 mm grade stone agg)concrete 25 mm thick as floor even and fair to receive top layer complete all as specified and directed

M&L PCC (1:2:4) type B-1 using 20mm graded stone aggregate, 100mm thick finished even & smooth w/out using extra cement, complete all as specified and directed by Engineer-in-Charge.

M&L Non skid coloured ceramic tiles 7 mm thick area of each tiles exc 0.06 sqm but n.exc 0.11 sqm as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15mm thick in CM 1:4 screed bed to complete all as specified and as directed.

M&L Non skid coloured ceramic tiles 7 mm thick area of each tiles exc 0.11 sqm but n.exc 0.18 sqm as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick in CM 1:4 screed bed complete all as specified and as directed.

M & L for vitrified ceramic tiles light shade 09-10mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge

M & L for vitrified ceramic tiles dark shade 09-10mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge

M & L for coloured glazed ceramic tiles of size 350x250x7mm /450 x 300 x 7 mm thick on vertical surfaces such as skirting/dado, jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including CM 1:4 15mm thick rendering / backup complete all as specified and as directed.

M & L for 18 to 20 mm thick granite (of any type) machine cut in floor/platform/tread, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match shade of granite stone including grinding and polishing over and including 15mm thick in CM 1:4 screed bed complete all as specified and as directed.

M&L for 18 to 20 mm thick granite (of any type) machine cut in skirting/dado/riser, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match shade of granite stone including grinding and polishing over and including 15mm thick in CM 1:4 screed bed complete all as specified and as directed.

M & L Rounding to edges of granite stone slabs one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed

M&L for 100 mm thick Cement Concrete (1:3:6) Type C2 (40mm Graded Stone Aggregate) as in Plinth protection , etc., finishing the cement concrete surface even and smooth without using extra cement, including Use and Waste of necessary Form Work, complete all as specified and directed by Engineer-in-Charge.

M&L for coloured chequered cement concrete tiles 30mm thick,of any shape and size not less than 0.09 sqm in each tiles, set and jointed, pointed in neat cement slurry in floors with grey cement and pigment over 15mm thick screed in cement mortar (1:4) including dismantiling of existing tiles complete all as directed.

M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, including taken down exisitng cement plaster complete all as specified and directed by Engineer-in-Charge.

M&L Rendering 15mm thick in CM 1:6 on brick or concrete surfaces finished even and smooth without using extra cement including taking down exisitng cement plaster complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous china white wash down water closet pan, pedestal pattern including fixing bolts, 'P' or 'S' trap, plastic water closet seat and cover with recessed bottom with MS CP hinging device (excluding flushing cistern and flush pipe) complete all as all as directed by Engineer-in-Charge.

S&F in repairs vitreous china Orissa pattern 'squatting pan', white of size 580x440mm with integral foot rest (excluding flushing cistern and flush pipes) but with its cement concrete bedding and ‘P’ or ‘S’ trap, including PVC pipe up to finished floor level to connect flush pipe, making good all the disturbed surfaces to match the adjoining complete all as directed by Engineer-in-Charge.

S&F in repairs vitreous china Urinal half stall type, white complete all as all as directed by Engineer-in-Charge.

S & F in repairs WHB vitreous china, 'Flat back or angle back type', white including cutting for & pinning in ends of brackets or existing stand including PVC waste pipe and fitting 32mm complete all as directed by Engineer-in-Charge.

S&F in repairs WHB vitreous china glazed, size 550x440mm, Oval type coloured including cutting for & pinning in ends of brackets or existing stand including CP waste pipe and fitting 32mm complete all as specified and directed by Engr-in charge

S&F in repairs 12 mm thick toughen glass as in urinal partition including frosted film on glass fixing with stainless steel clamps minimum 02 No's complete all as directed. Make:- Catpart No. JSE-CHR-110UC 450X of Jaguar or equivalent in Cera, Parryware.

S & F in repairs PVC valve less, symphonic action type, flushing cistern 10 ltr capacity, low level, white, with inlet ball valve float and handle along with suitable flush pipe/bend including brackets, complete all as directed by Engineer-in-Charge.

S & F in repairs towel ring of 220x250x70mmCP fixed with and including CP brass screws and wooden/plastic cleats complete all as directed by Engineer-in-Charge.

S&F in repairs Stainless steel Toilet paper holder with flat recessed type stainless steel complete all as specified and directed."

S & F in repairs PVC connection pipe 15mm dia, 600mm long with PTMT check nuts and washer on both ends complete all as directed by Engineer-in-Charge.

S & F in repairs grating doom 100mm dia of CP complete all as directed by Engineer-in-Charge complete all as specified and as directed.

S&F in repairs 32mm waste coupling of cast copper alloy chromium plated (half or full threaded), complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 40 mm waste coupling of cast copper alloy chromium plated (half or full threaded), complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 15 mm, Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure with or without lettered ‘Hot’ or ‘Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as directed by Engineer –in-Charge.

S&F in repairs 15m dia pillar taps SWAN NECK type copper alloy with capstan head chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as directed by Engr- in - charge.

S & F in repairs bib cock, cast copper alloy, chromium plated for size 15mm dia with crutch or butterfly handle, screwed down for iron pipe complete all as directed by Engineer-in-Charge.

S & F in repairs stop cock 15mm dia cast copper alloy, screwed down high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions, complete all as directed by Engineer-in-Charge.

S&F in repairs Gun Metal, globe or gate valves 25 mm bore, with iron wheel head screwed both ends for iron pipe

S&F in repairs 15 mm angle valve of cast copper alloy chromium plated, high pressure screwed for iron pipe

S & F in repairs two way bib cock, cast copper alloy, chromium plated for size 15mm dia with crutch or butter handle, screwed down for iron pipe complete all as directed by Engineer-in-Charge.

S&F in repairs Urinal spreader high pressure of cast copper alloy chromium Plated screwed for iron pipe

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. and all fittings to fix screwed down for iron pipe complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S & F in repairs PVC cabinet designer mirror 400x500mm with mirror complete all as specified and directed by Engineer in Charge. Make: Catpart No. 554 of Prayag or equivalent approved by GE.

S&F in repairs fancy type cold and hot wall mixer brass chromium plated 3 in 1 single lever wall mixer with hand shower) with bend pipe and including all accessories complete as directed by Engineer-in-Charge.

Supply and fix 16 mm dia CPVC pipes 11 SDR & plain CPVC 11 SDR fittings, fixed on wall concealed or exposed /ceiling or laying in floors including taking up or down steel tubing all as specified and as directed by Engineer-in-Charge. Make : Prayag/Astral/Finolex/Prince

Supply and fix in repairs 20 mm dia SDR 11 CPVC pipes & plain CPVC SDR 11 fittings, fixed on wall concealed or exposed /ceiling or laying in floors including taking up or down steel tubing all as specified and as directed by Engineer-in-Charge. Make : Prayag/Astral/Finolex/Prince

S & F 15mm bore Tubes, `medium grade' galvanized, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down steel tubing all as specified and as directed by Engineer-in-Charge.

S & F 20mm bore Tubes, `medium grade' galvanized, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down steel tubing all as specified and as directed by Engineer-in-Charge.

S&F in repairs 40mm dia GI medium grade pipe as in spouts 45cm long including making holes in RCC and making good in cement mortar 1:1/PCC 1:2:4 complete all as directed by Engr-in-charge.

S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) tripple layered 500 ltr capacity ISI mark, hoisted and fixed in position all as specified in SSR Part I including taking down old unserviceable water tank complete all as specified and as directed by Engineer-in-Charge.

S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) triple layered 1000 ltr capacity ISI mark, hoisted and fixed in position all as specified in SSR Part I including taking down old unserviceable water tank complete all as specified and as directed by Engineer-in-Charge.

S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) triple layered 2000 ltr capacity ISI mark,, hoisted and fixed in position all as specified in SSR Part I including taking down old unserviceable water tank complete all as specified and as directed by Engineer-in-Charge.

S & F in repair ball valves, PTMT epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed of 25 mm bore complete all as directed by Engineer-in-Charge.

S & F in repairs PVC (SWR) pipes 160mm bore, single socketed in any length with rubber ring joints fixed to wall or laid in floors complete all as directed by Engineer -in-Charge.

S & F in repairs PVC (SWR) bends (any radius) suitable for 160 mm bore pipe complete all as directed by Engineer -in-Charge.

M&L for preparation of old distempered surfaces of walls by washing, rubbing down etc and apply one coat of distemper oil emulsion and all as specified and as directed by Engr-in Charge.

M&L for preparation of old surfaces of walls by washing, rubbing down and stopping and applying one coat of weather proof antifungal exterior paint complete all as directed.

M&L for preparation of new plastered surfaces and applying two coats of weather proof antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm thick each layer to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed . Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH (BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC(DULUX)

M&L for preparation of Newly plastered surfaces of walls/ ceiling, washing with water and applying two coats of Distemper paint as per manufacturers instructions over a coat of primer over two coats of putty 1.5mm thick each layer each to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed by Eng-in-charge. Make:- TRACTOR EMULSION of ASIAN PAINTS /JOHNSON & NICHOLSON (JOHNSOLIN)/ BERGER PAINT Note:- (i) The putty surface shall be finished even smooth and dent free before application of primer, stage passing shall be taken for each building at every stage. ii) Paint work should be carried out by Authorised applicator with brand waranty.

Anjana corporation

Venkat Sai Enterprises

SRI SAI ENTERPRISES

SUN LIGHT HOUSE

Mourya Enterprises

ELEVATORS MAINTENANCE ENGINEER WORKS

S Anjan Reddy

M/s ANUSHA ENTERPRISES