WBPWD/EE/KNHED/NIQ-73/2nd Call/23-24

Amount

Supply & delivery & Commissioning suitable size floor cum wall mounted compartmentallize of cubical type LT Distribution board 2 mm thick CRC sheet with suitable size angle and base channel. The panel should be consist of t of side cable alley with top and bottom cable entry with gland plate made of 3 mm CRC sheet and Main switch and allied accessories.

Incoming Arrengement: 415V, 415A TPN SFU with HRC fuse link 3 nos- 1 nos (make L&T/ABB/Schneider) & 415V, 415A 4P Change over -1 no (make L&TL&T/ABB/Schneider) Bus bar section- 4 nos 600A( 4 x 2x(5 x 40mm)) cu bar incl 4 colours heat shrinkabe sleeve installation on FRP insulator. Out going Arrangement : 415V, 125A TPN SFU with HRC fuse link-6 nos. . (make L&T/ABB/Schneider) Panel accessories: 415/5A CT-3 nos (make AE/Kappa) Digital VAF meter, 1 nos ,6A SPMCB-3 nos (L&T) Indicating lamp-3 nos Paint : paint will be powder coated by approved paint.

Supply & delivery & Commissioning suitable size floorcum wall mounted compartmentallize of cubical type LT Distribution board 2 mm thick CRC sheet with suitable size angle and base channel. The panel should be consist of side cable alley with top and bottom cable entry with gland plate made of 3 mm CRC sheet and Main switch and allied accessories: Incoming Arrengement: 415V, 250A TPN SFU with HRC fuse link-3 nos -1 no (make L&T/ABB/Schneider) & 415V, 250A 4P Change over -1 no (make L&T/ABB/Schneider)

Bus bar section- 4 nos 400A ( 4 x 5 x 50mm) cu bar incl 4 colours heat shrinkabe sleeve installation on FRP insulator. Out going Arrangement : 415V, 63A TPN SFU with HRC fuse link-6 nos. (make L&T/ABB/Schneider) Panel accessories: 250/5A CT-3 nos (make AE/Kappa) Digital VAF meter, 1 nos ,6A SPMCB-3 nos (L&T) Indicating lamp-3 nos Paint : paint will be powder coated by approved paint.

For Install New LT panel Dismantling & Disconnecting different type Incoming & Outgoing cable (9 nos) and then connection temporary to cotinue uninturrupted power supply .

Supply & Laying only 4Cx50sqmm Al Ar XLPE cable on surface by saddling with 2 nos 10SWG GI wire. (Make- Polycab/Gloster/Havells)

Supply & Laying only 4Cx70sqmm Al Ar XLPE cable on surface by saddling with 2 nos 10SWG GI wire. (Make- Polycab/Gloster/Havells)

Supply & Laying only 4Cx25sqmm Al Ar XLPE cable on surface by saddling with 2 nos 10SWG GI wire.(Make- Polycab/Gloster/Havells)

Supply & Laying only 4Cx95sqmm Al Ar XLPE cable on surface by saddling with 2 nos 10SWG GI wire.(Make- Polycab/Gloster/Havells)

Supply & Laying only 4Cx120sqmm Al Ar XLPE cable on surface by saddling in wall with 2 nos 10SWG GI wire.(Make- Polycab/Gloster/Havells)

Supply & Laying only 4Cx150sqmm Al Ar XLPE cable on surface by saddling in wall with 2 nos 10SWG GI wire. (Make- Polycab/Gloster/Havells)

Supply & Laying only 4Cx185sqmm Al Ar XLPE cable on surface by saddling in wall with 2 nos 10SWG GI wire. (Make- Polycab/Gloster/Havells)

S & Drawing 50sqmm Single core unarmoured cu cable through PVC flexible pipe. (Make-Polycab/Gloster/Havells)

Supply and fixing 4 nos 415V, 315A CU bus bar chamber (4x40x5 mm) consisting of 500x150 mm sheet metal box

Supply and fixing 3'x1.5' wooden borad with S&F MCB din rail channel including supply and fixing 415V,100A FP MCB -3 nos

Dismantling the existing LT Distribution Panel part by part and shifting the section store by loader.

Dismantling the existing net guard cover of LT Distribution Panel by cutting tools /welding machine and shifting the section store and reinstalling the same with proper arrengement.

Supply & delivery & Commissioning suitable size floorcum wall mounted compartmentallize of cubical type LT Distribution board 2 mm thick CRC sheet with suitable size angle and base channel. The panel should be consist of Three phase Energy Meter-1 nos (L&T/landis gyer) with Panel accessories: 250/5A CT-3 nos (make AE/Kappa) Digital VAF meter, 1 nos ,6A SPMCB-3 nos (L&T) Indicating lamp-3 nos Paint : paint will be powder coated by approved paint.

S & F Double door 8 way VTPN MCCBDB with IP 42/43 protection, 160A, 25kA4P MCCB as Incomer & 8 nos 63A TPMCB with making necessary connection. With S&F 2 nos cable entry box (Make-legrand/L & T/ABB)

S & F Double door 8 way VTPN MCBDB with IP 42/43 protection, 125A, 25kA4P MCCB as Incomer & 4 nos 63A TPMCB & 4 nos 40A TPMCB with making necessary connection. With S&F 2 nos cable entry box (Make-legrand/L & T/ABB)

Withdrawing different type (4Cx 185-35m,4Cx70-40m & 4Cx35sqmm 15m from inside wall.

Relaying only 4Cx35sqmm, 4Cx70sqmm, 4Cx185sqmm XLPE cable on surface by sadding with 2 nos 10SWG GI wire.

Withdrawing different type (4Cx 50-20m,4Cx25-40m sqmm from inside wall.

Relaying only 4Cx50sqmm, 4Cx25sqmm XLPE cable on surface by sadding with 2 nos 10SWG GI wire.

Withdrawing different type (9 nos.4Cx 35-9x10m, 2 nos.4Cx120-2x14m from inside wall.

Laying only 4Cx35sqmm XLPE cable on surface by sadding with 2 nos 10SWG GI wire.

Cost of straight through jointing of cable of different size by compound jointing (Heat shrink) kits incl. S & F Ferrule, tapes & jointing materials. 4Cx35sqmm

4Cx70sqmm

S & F compression type gland & finishing the ends by crimping arrangement of the following XLPE A/Ar cable. 4C x 25sqmm

4C x 35sqmm

4C x 50sqmm

4C x 70sqmm

4C x 95sqmm

4C x 120sqmm

4C x 150sqmm

4C x 185sqmm

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (make-Finolex/Havells/Gloster/Polycab) in 32mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required i) 4 x 16 sqmm + 2 x 10sqmm

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (make-Finolex/Havells/Gloster/Polycab) in 40mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required i) 4 x 25 sqmm + 2 x 16sqmm

S & errection of special type net guard of giving deep fabrication to suitable MS angle, flat and section 1"x1" 10SWG welded mech IRC netting suitable for fixing on wall covering the existing LT pnel, should be sterdly and electrically welded in a measurement of front side of the board should be cover by 2 nos. door palla made of 25x25 flat (column& vertical) and 35x35x5mm angle left & right side of the inverter & battery will be covered by 1"x1" 10SWG IRC net & also raisedon same combination be covered by 10SWG IRC net with help of reqd angle & flat to cover up fabrication will be complete in a compact position finally the protection should be paited moisture proof red oxide priemer & approved paint with carrying charges.

Rate should be Quoted inclusive of all taxes, cess & duities

MAHESWAR ELECTRICAL INDUSTRIES

BIKASH ENTERPRISE

M/s Singh Electrical Works