Construction of Working Womens Hostel building Thozhi with development works at Coimbatore Medical College Campus, Vilankurichi in Coimbatore District.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

1.6 : Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

7.2 : Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 : S&F of Magnetic door catches

30 : Ellispattern

31 : Weathering course

37.1 : White washing 3 coats (slaked)

39 : S & F of M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

47 : S & F Alu Towel rail 75 cm long

50.3: Supply and planting avenue trees

50.4 : Providing Tree guard

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

c. 20 mm dia

52.1 : Supplying and fixing of 20mm dia "B" Class GI pipe for Hot water line (Fully Concealed in walls)

Electrical arrangements 69 : 16 Amp. Power plug

72 : Box type Fibre Fan hook

74 : Charges for fixing of "Fan"

76 : 8 SWG wire

78 : Earthing Station IS3043 (Type I)

86 : Anti termite treatment

ANNEXURE-I 2.1.1 : Supplying and filling with Gravel

2.1.3 : Filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

3.3.1 : P.C.C. 1:8:16 using 20 mm broken brick jelly (using crushed stone sand)

3.8.1 : P.C.C. 1:4:8 using 40 mm HBGS Jelly (using crushed stone sand)

6.2.1.1 : Brick work in C.M. 1:5 (F& B) with Admixture using Fly ash bricks of size 230x110x70mm in Foundation and Basement

8.3.1.1 : Standardised concrete Mix M30 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b. In Ground floor

c. In First floor

d. In Second floor

e. In Third floor

f. In Fourth floor

g. In Fifth floor

9.2.1.1: Brick work in Cement Mortar 1:6 (One of cement and six of Crushed stone sand) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e) In Fourth Floor.

f) In Fifth Floor.

10.2.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a. In Foundation and Basement

b.In Stilt / Ground Floor

c. In First Floor

d. In Second Floor

e. In Third Floor

f) In Fourth Floor.

18.1 : Formwork using M.S.Sheet a.For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,

b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

c.For Square and rectangular columns and small quantities

d. For Vertical wall

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

21.5.5.1: Supplying and fixing of solid core flush door shutter of thickness 35mm a) Door size 1000mm x 2100mm (Single Leaf)

23.1.1 : TW styles & rails with 9mm thick BWR single leaf shutters with brass screws c. 1000 x 2100 mm

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) including plasticizer

29.2.1.1 : Providing Rajasthan Kota Stone of size 2' x 2' of 20mm thick with machine cut edges in C.M 1:3 (using crushed stone sand)

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

32.1.1: Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx23cmx20mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound at 2%

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) including plasticizer

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) including plasticizer

35.1.1 : Plastering in CM 1:3, 12mm with WPC (using crushed stone sand) including plasticizer

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand) using plasticizer

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand) b. 75 mm wide

c. 50 mm wide

38.7 : Plastic Emulsion PAINT including primer for inner walls

38.7.1 : Plastic Exterior Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1: Rain water harvesting using defunct borewell and providing perforated cover slab (M30) a). Providing pit

b) Augering 30cm dia

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.2.1 : Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150mm (using crushed stone sand)

50.5.1 : Supplying. Fabricating and erection of M.S Scheme Name board (using crushed stone sand)

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

53.5.2 : Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.4.1 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - Other than G.F.(using crushed stone sand)

57.1.2 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4: Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

60.1 : PVC Nahani trap (4way/2way)

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.

66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

90.1: Providing additional strutting to centering of plain surface For every 1m Height a) 3m to 4m Height

b) 4m to 5m Height

98.3.2 : TW Double leaves panelled door shutter (with brass fittings) a. 1800 x 2100mm (double leaf)

112.1 : S&F of 225 mm dia sweep AC exhaust fan

344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm

379.5.1 : S&F of Granite tile of size 2'x1', 10mm thick for Kitchen arrangements (jet black) (using crushed stone sand) a.In Ground floor

ANNEXURE - II A1: Supplying and fixing of SFRC manhole Cover with frame of size 600mm x 600mm with locking arrangements including of all cost etc., all complete and as directed by the departmental officers.

A2: Supply and Laying of Granite wall cladding (Satharlic Grey, Paradise and similar varieties) ) of 10mm thick in C.M 1:2 (using crushed stone sand) Including Cost of Materials, Labour charges etc., all complete and as directed by the departmental officers. (The colour and Quality should be got approved from the Executive Engineer before use)

A3: Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothly with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing

A4: Supplying and fixing of LED blubs suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9 watts LED bulb

A5: b) 12 watts LED bulb for bulk head fittings

A6: Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing

A7: Supply and fixing of LED Bulk head fitting for 12W LED Bulb

A8: Supplying and fixing of 30W LED Street light with necessary fittings (Superior variety) Charges for fixing 30W LED lamp street light fittings

A9: Supplying and fixing of 25W LED Street light with necessary fittings (Superior variety) Charges for fixing 25W LED lamp street light fittings

A10: Providng one coat of Wallputty for new plastered surface

A11: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free.

A12: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free.

A13: Supply & laying flooring tiles for colour stain free nano polish Tiles 600 x 600 x 8mm with 1st Quality homogeneous Full body tiles for flooring and other similar works in cement mortar 1:3 (one of cement and three of CS sand) 20mm thick including fixing in position, cutting the tiles to the required size wherever necessary pointing the joints with grout (Tile joint filler), curing, finishing etc.,

A14: Supply and delivery, fixing of 0.47mm Galvanium sheet roof of approved quality with necessary J bolts with bitemen and GI washers including cost of Erection, Fasteners, Transportation charges and all other labour charges etc., all complete and as diected by the departmental officers.

A15: Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations

A16: Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing.

A17: S & F of 15mm dia CP Two way tap bib cock with health faucet approved quality with ISI mark including cost of labour charge and etc., all complete and as directed by the departmental officers.

A18: Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.( Modular) (Open wiring) a. Light point with ceiling rose

A19: Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (open wiring)

A20: Run off 2 Wires of 6 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Open wiring)

A21: Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm - 2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges - 3 Nos.,

A22: Supply and fixing of 7 segment 6 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only etc., all complete and as directed by the departmental officers.

A23: Supply and fixing of 65mm dia GI pipe (Class 'B') of 4 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom and with concreting and construction on masonary pedestal with MS box of 30cm x 20cm x 10cm with angle iron frame work with door with lock and key arrangements and with supply and fixing of 30 W LED street light fitting with bulb and fixing of 1 No. 70W SV lamp and with supply and fixing of 16A fuse unit, (500V), 5A SP switch inside the MS box and painting with suitable colour etc., all complete and as directed by the departmental officers.

A24: Supply and fixing of Brass chromium plated soap tray of size 150mm x 100mm

A25: Supplying, delivery and fixing of 83mm tk rubber moulded hydraulic pressed paver block including conveyance charges, laying of 83mm thick paver block

Lift: A26: Design, Supply, Delivery, Installation, Testing, and Commissioning of Passenger Lift (Brand: Johnson / Kone / OTIS or equivalent) of capacity 13 Persons with 3 Floors / 4 Stops / STAINLESS STEEL (1.5 mm) Car Cabin as per the following specifications Three phase EB power supply should be get from the TNEB for installation and testing etc for completion of work.

Genset A27: Supply, erection, testing and commissioning of 125 KVA Diesel Generator set with Auto Main Failure (AMF) panel of approved makes like (Kirloskar / equivalent) as per the new CPCB norms complete with all accessories like engine, alternator, batteries with leads, control panel, base frame, antivibration mounts, residential silencer, 290 litres fuel tank, intake and exhaust piping, fuel oil motor operated pump, other miscellaneous accessories for the total set including test trial run at load for 8 hours.

A28: Supply and Insulation for the residential silencer (supply of residential silencer is included under item for DG Sets)

A29: Supply and installation of M.S. cable adopter box (made of 14 SWG sheet steel) with suitable copper bus extension link from alternator. The adopter box shall have tinned copper bus bar of suitable size for phases and neutral with suitable holes for cable termination Necessary rubber gaskets between alternator and cable box shall be provided to avoid vibration between adopter box and alternator.

A30: Supply and installation of MS exhaust pipe of suitable thickness with 100mm dia upto 5m from the silencer complete with necessary supports, brackets etc. The supports shall have at intervals of not more than 2.5m.

A31: Supply and insulation of exhaust pipe thermal insulation lagging with mineral wool as per IS 3677 / 1973 reinforced with chicken mesh and cladded with aluminium sheet of 26 SWG and 50mm thick with 64 Kg/Cu. Mtr. Density.

A32: Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe to prevent rain water entry to exhaust pipe with provision of drain plug in the system.

A33: Preparation of necessary drawings for approval by Chief Electrical Inspector to Government / CEA, obtain approval for the same, arrange for the inspection by the Electrical Inspectorate / CEA Officials and obtain safety certificate from them for commissioning the DG set

Air Condition unit: AIR-CONDITIONER with Copper Coil A34: Supplying and Delivery of AC unit 2.0 Ton 3 Star inverter split Air Conditioner with all accessories etc.,all complete and as directed by the departmental officers.

A35: Supply and installation of 4 KVA capacity Automatic Voltage Stabilizer with time delay relay etc.,all complete and as directed by the departmental officers.

A36: Supply and laying of 5/8" and 3/8" copper pipe (Extra beyond 3 metres supplied with AC unit) etc.,all complete and as directed by the departmental officers.

A37: Supply and fixing of MS stand for fixing outdoor unit etc., all complete and as directed by the departmental officers.

Public Address System: A38: Supplying delivery and fixing of PA mixer Amplifier 120 watts including cost of all materials & labour charges etc., all complete and as directed by the departmental officers. (The brand should be got approved from the Executive Engineer before supply made)

A39: Supplying delivery and fixing of 15 watts wall mounting Wall Speaker including cost of all materials & labour charges etc., all complete and as directed by the departmental officers. (The brand should be got approved from the Executive Engineer before supply made)

A40: Supplying delivery and fixing fixing of Cordless Mic UHF including cost of all materials & labour charges etc., all complete and as directed by the departmental officers. (The brand should be got approved from the Executive Engineer before supply made)

A41: Supplying delivery and fixing of Chairman unit including cost of all materials & labour charges etc., all complete and as directed by the departmental officers. (The brand should be got approved from the Executive Engineer before supply made)

A42: Supplying delivery and fixing of Conference controller including cost of all materials & labour charges etc., all complete and as directed by the departmental officers. (The brand should be got approved from the Executive Engineer before supply made)

A43: Supplying delivery and fixing of 8 Pin Conference Mic Socket with Modular Box and Front Plate including cost of all materials & labour charges etc., all complete and as directed by the departmental officers. (The brand should be got approved from the Executive Engineer before supply made)

A44: Supplying delivery and fixing of 2 Core 1.5 sq.mm Shielded Copper Speaker Wire including cost of all materials & labour charges etc., all complete and as directed by the departmental officers. (The brand should be got approved from the Executive Engineer before supply made)

A45: Supplying delivery and fixing 10’ x 8’ Motorized Screen including cost of all materials & labour charges etc., all complete and as directed by the departmental officers. (The brand should be got approved from the Executive Engineer before supply made)

A46: Supplying delivery and fixing 20 Metre HDMI Cable including cost of all materials & labour charges etc., all complete and as directed by the departmental officers. (The brand should be got approved from the Executive Engineer before supply made)

SRP CONSTRUCTION COMPANY (BID ID -1254860)

N SAKTHIVEL AND CO (BID ID -1256397)

T Azhakesan (BID ID -1256754)

SRI EZHUMALAIYANCONSTRUCTION (BID ID -1256898)

chendur construction company (BID ID -1256215)

DMW Infrastructure India Private Limited (BID ID -1256342)

M/s. LJK Constructions (BID ID -1256129)