Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.4 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹31.3 L+₹35,811 (1.16%)Rejected-Finance N A | NA | NA | 121004 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹33.8 L+₹2.8 L (9.19%)Rejected-Finance BLDG 9 FLAT 130 MIRA CO OP HOUSING SOCIETY LTD SALISBURY PARK GULTEKDI PUNE 411037 | PUNE | PUNE | MAHARASHTRA | 411037 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹33.9 L+₹3.0 L (9.53%)Rejected-Finance 54 10 SHANTI NAGAR NEAR SHINDE CHATRI WANAVADI PUNE 411040 | PUNE | MAHARASHTRA | 411040 | L4 | Rejected-Finance Not Lowest |
Tender Value
₹38.5 L
EMD Value
₹77,100
Closing Date
23 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH PUNE
Garrison Engineer North General Cariappa Marg Camp Pune 411001
GE (N) P/TOKEN- 52 OF 2023-2024ADDL/ALTRN OF INTEGRAGED OPERATIONAL ROOM BLDG NO P-13 AND P-4 AT SCLU IN THE AREA OF AGE B/R EAST UNDER GE(NORTH) PUNE
2023_MES_611158_1
GE (N) P/TOKEN- 52 OF 2023-2024
Open Tender
Civil Works
Item Rate
240 days
GE NORTH PUNE
Refer tender documents.
8 documents required · 8 mandatory
₹500
GE NORTH PUNE
₹77,100
Yes
12 Dec 2023
28 Jul 2023
30 Aug 2023
28 Jul 2023
23 Aug 2023
11 Aug 2023
29 Jul 2023 - 4 Aug 2023
Amount
Excavation in trenches n. exc 1.5 m wide & n.exc 1.5 m in depth and getting out in Hard dense soil complete all as per specified and as directed.
Removing excavated material exc 500 m and n exc 1.5 Km and depositing where directed at a level n exc 1.5m above the starting point complete all as per specified and as directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as per specified and as directed.
M&L for providing cement concrete type D2 1:4:8 (40mm graded aggregate) as in foundation filling mass concrete etc complete all as per specified and as directed.
S&F mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirlly for hooping for column, hooping ends and binding with and including mild steel wire not less than 0.9 mm dia or securing with clips complete all as per specified and as directed.
S&F mild steel TMT steel bar 8mm dia cut to length bent to shape required including cranking bending as in stirrups, binding with and including mild steel wire not less than 0.9 mm dia or securing with clips complete all as per specified and as directed.
M&L for form work to sides of concrete foundations, footings, plinth beams and similar work rough finished surfaces of concrete complete all as per specified and as directed.
M&L for form work to sides of pillars, columns and like rough finished surfaces of concrete complete all as per specified and as directed.
M&L for form work to sides and soffits of chajjas and similar work with rough finished surfaces of concrete complete all as per specified and as directed.
M&L for rough finished surfaces of concrete form work to sides and soffits of floor beam roof beam beam haunchins, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams, etc
M&L for RCC M-25 Design Mix (using 20mm graded stone aggregate) as in foundation, footing, plinth beams and bases of columns etc complete all as per specified and as directed.
M&L for RCC M-25 Design Mix (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as per specified and as directed.
M&L for RCC M-25 Design Mix (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.50 span complete all as per specified and as directed.
M&L for RCC M-25 Design Mix (using 20mm graded stone aggregate) as in chajjas and the like complete all as per specified and as directed.
M&L moorum filling in floors or pavings laid in layers complete all as per specified and as directed.
M&L sand filling under floor or in foundation including watering and consolidation complete all as per specified and as directed.
M&L for hardcore of gauge exc, 63mm , deposited spread and levelled in layrs n exc 15cm thick, watered and rammed to a true surface complete all as per specified and as directed.
M&L 75mm thick PCC 1:4:8 type D2 as in sub base complete all as per specified and as directed.
M&L coloured vitrified double charge tiles 10mm thick (square/rectangular) area of each tile exc 0.36sqm but not exc 0.72 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 20mm thick screed bed or bedding layer in CM 1:6 surfacecomplete all as per specified and as directed. Make : Kajaria/NITCO/Johnson.
M&L coloured vitrified double charge tiles 10mm thick (square/rectangular) area of each tile exc 0.36sqm but not exc 0.72 sqm as in dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 20mm thick screed bed or bedding layer in CM 1:6 and complete all as per specified and as directed. Make : Kajaria/NITCO/Johnson.
M&L for coloured ,Glazed ceramic tiles in vertical wall surfaces 600 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or color cement to match, laid of 10 mm thick plaster in CM (1:4), complete all as per specified and as directed.
M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floor etc set and jointed in neat cement slurry and pinted in white or coloured cement to match the tiles including 20mm thick screed bed or bedding layer in CM 1:6 complete all as per specified and as directed.
M&L old size brick fly ash bricks straight or curbed on exc 6M mean radius built in CM 1:6 complete all as per specified and as directed.
M&L brick work with fly ash bricks straight or curved on plan any radius in half brick thick wall built in cement morter 1:4 complete all as per specified and as directed.
M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement , with two coats of exterior emulsion paint with primer on new surface complete all as per specified and as directed. Note :Rate for form work if reqd to be incl in the rate quaoted by the contractor.
M&L for preparing of wall surfaces and make surface free from loose particles oil stains etc. and surface ideally prewetted, applying white cementitious wall care fine putty average thickness 1.5mm complete all as specified and as directed by Engineer-in-Charge.
Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, on wall and applying two coat of lustre paint with primer complete all as specified and as directed
Demolition of brick work /stone bolder built in cement mortar complete all as per specified and as directed.
S&F mild steel compound girders and stanchions, lattice girders aerial masts, staging for water tank and the like including caps bases, splices etc built up from two or more beam or channel sections or angle with plates, including all lattice bars, stiffeners, gusset plate grade Fe-410-W(Gde-E-250) quality- A complete all as specified and as directed
S&F MS plates for door, channels, square cut oer notched (ordinary and counter sunk) forming holes without any attachment complete all as per specified and as directed.
S&F 1.0 mm thick plain black mild steel sheeting, in ridge, hips, valley gutter, drip and straight flashing (Length and girth as fixed) with grade of zinc coating complete all as per specified and as directed.
Preparation of newly steel surface of any description with two coats of synthetic enamel paint over a coat of red oxide primer, girth exceeding 10 cm in width or width complete all as per specified and as directed.
M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in bed block/coping etc complete all as per specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour, having tensile strength of 550 Mpa as in roof covering/ cladding to wall, having manglore tile pattern impressions fixed with self tapping screws complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour, having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F GI tubing 25mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as per specified and as directed.
S&F GI tubing 15mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as per specified and as directed.
S&F GI tubing 20mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as per specified and as directed.
M&L 75mm thick PCC 1:3:6 type C2 as in plinth protection, floor, hard standing finished even and smooth with out using extra cement complete all as per specified and as directed.
Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC (1:2:4) type B-1, smooth finished and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed.
S/F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as per specified and as directed.
S/F repair for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall complete all as per specified and as directed.
M&L for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints or fixed in trenches or in floors complete all as per specified and as directed.
M&L for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches and fixed in floors complete all as per specified and as directed.
S&F 110mm bore PVC (SWR) bends any radius complete all as per specified and as directed.
S&F 75mm bore PVC (SWR) bends any radius complete all as per specified and as directed.
S&F PVC (SWR) junction (double ‘T’) of size 110mm bore complete all as per specified and as directed.
S&F PVC (SWR) junction (double ‘T’) of size 75mm bore complete all as per specified and as directed.
S&F PVC (SWR) vent cowl of size 75mm bore complete all as per specified and as directed.
M&L for 150mm bore dia RCC pipe class NP2 laid and jointed in cement mortar with collars and tested complete all as per specified and as directed.
M&L for PCC 1:4:8 type D2 as in concrete bed to drain pipes of 150mm bore including packing under and haunching against the sides of pipe after they are laid complete all as per specified and as directed.
M&L for aluminium anodized louvered ventilator of standard aluminium section with adjustable louvers of aluminium with frosted glass and fly proofing complete all as per specified and as directed.
Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia complete all as per specified and as directed.
M&L for 12.5 mm thick Gypsum board (moisture resistant) seamless as in the ceiling/Lining fixed with counter sunk screws on and including GI channels frame work of standard section as per manufacture’s instructions, fixed @ 1.2 m in one direction and 45 cm in center to center in other direction with necessary fixing arrangement at their junction point at desired heights below roof slab and including two coats of plastic emulsion paint over a coat of primer on exposed surfaces. (the frame work shall be fixed with the help of GI suspenders of suitable size with the help of sash fasteners and along wall, making good disturbed surfaces, smoothening the gypsum board, POP lining at joints as required complete all as specified and directed. Make: Gyproc-Saint Gobain of equivalent of Armstrong, Diaken, New Age (ACE) as approved by GE
S&F Brass Chromium plated towel ring complete all as per specified and as directed. Make: Jaquar Cat part No:AQN-7721 or of equivalent make as per Appx 'A' as approved by GE
S&F 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4, complete all as per specified and as directed.
S&F 100mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4, complete all as per specified and as directed.
S&F white counter top Basin (self-rimming) size 520mm x 460mm x 160 mm fixed in position including , waste pipe etc complete Make: Italian collection Semi recessed, Cat Part No –ENIGMA-91012 or of equivalent make as per Appx 'A' as approved by GE.
S&F Pillar taps with extension body quarter turn suitable for 15mm bore pipe fancy type brass CP screwed for iron pipe or brass ferrule complete all as per specified and as directed. Make: Jaquar Cat part No: FUS-29021N or of equivalent make as per Appx 'A' as approved by GE.
Supply and fix in repairs vitreous china wash down floor mounted coupled water closet with PP soft close seat cover, hinges, fixing accessories and accessories set, size 410x720x800mm, S trap 250mm, flushing cistern with cistern fittings complete all as specified and as directed. Make :- Jaquar Cat No. VGS-WHT-81751 S (Bowl) and VGS-WHT-81201 (Cistern) or of equivalent make as per Appx 'A' as approved by GE
S & F brass Chromium plated soap dish , fixed to wall with CP brass screws, complete all as per specified and as directed. Make: Jaquar Cat part No:AQN-7731 or of equivalent make as per Appx 'A' as approved by GE
Supply and fix in repair for corner glass shelf of size 200mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed.
Supply and fix for glass shelf 450mm X 150mm X 8 mm thick with chromium plated railing fixed with and including chromium plated brackets complete all as specified and as directed.
S&F Toilet paper holder of stainless steel, complete all as per specified and as directed. Make: Jaquar Cat part No: AKP-35721P or equivalent as approved by the GE.
S&F two way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrulecomplete all as per specified and as directed. Make Jaquar Cat Part No -ORP-10041PM or of equivalent make as per Appx 'A' as approved by GE.
S&F angle stop valve with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as per specified and as directed. Make: Jaquar Cat Part No FUS- 29053 FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.
S&F rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyethylene material which is duly stabilized with anti-oxident Plastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball (Minimum weight 210gms) and 20 mm bore brass stop cock, high pressure with crutch or butterfly handle etc complete including dismantling existing water tank complete all as per specified and as directed.
S&F in repairs bib taps suitable for 15mm bore pipe long body fancy type brass CP with, Capstan head screwed down screwed for iron pipe or brass ferrule complete fixed in repair andcomplete all as per specified and as directed. Cat Part No FUS-29037 of Jaquar FUSION SERIES, or equivalent as approved by the GE.
M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like, in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite set and jointed in cement slurry and pointed in coloured cement to match, laid over and including 10mm thick cement backing coat in cement mortar (1:3) complete all as specified and as directed.
M&L for machine cut 20mm to 25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing and making good to disturbed surface complete all as specified and directed
S&F in repair Towel Rack 600mm long with lower hangers Stainless steel Jaquar Cat part No AQN-7781
M&L for Eaves/ weather boarding with 20mm thick fibre cement board (non asbestos) and fixed with self drilling and tapping screws of CSK head and joints finished with jointing compound and fiber tape as per manufacturer's recommendation complete of approved arch pattern any size and shape including two coat of synthetic enamal paint over one coat of suitable primer complete all as specified and as directed. Make: V-Board (Visaka Industries Ltd)/ Everest/ Charminar/ Ramco
S&F for powder coated aluminium single leaf, two panels, openable door ,half glazed on top using 5.5mm thick tinted glass panes fixed with PVC rubber bidding and glazing clips and bottom both side prelaminated particle board 12mm thick fixed with glazing clips,alongwith supplying and fixing aluminium body hydraulically regulated door closer, designation No 2 universal type, suitable for sheet width 701 to 850mm of weight between 36 to 80 kg ,door lock, handle, hanged on aluminium door floor spring, pivots etc etc using aluminium sections etc. complete all as specified and as directed. Note :- Catalogue numbers of Jindal or equivalent company. (i) Top-19528 (ii) Middle-19575 (iii) Bottom-19530 (iv) Vertical-19526 (v) Glazed clips section No. 19381 and 19352 (vi) 1'' interlock (20939) (vii)1'' handle(20602) .
S&F stanles steel rod of metalic 20mm dia complete with MS bracket golden colour rings and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified as directed by Engineer-in-Charge
Dismantling of single layer of manglore pattern tiles in roofing including ridge tiles complete all as per specified and as directed.
Dismantling battens of tiles of any size and description spaced exc 15 cm including tiling fillets complete all as per specified and as directed.
Dismantling or corrugated steel sheeting, any gauge thickness, including naintal or similar pattern roof covering complete all as per specified and as directed.
Dismantling timber scantling 40sqcm and over in section in any position, in framed work complete all as per specified and as directed.
M&L for treating the bottom and sides of excn at the rate of 5 ltrs of emulsion per sqm of surface area complete all as specifed and directed.
M&L for treating the soil along with external perimeter of bldg at the rate of 2.25 ltr/sqm of surface area complete all as per specified and as directed.
S&F pre-laminated (Printed) PVC rigid foam sheet of any shade wall paneling of 5mm thick stuck with adhesive on inner frame work of 35mm wide strips of 5mm thick rigid foam sheet. The strips should have a groove of 6mm width and 2mm depth for sinking the head of screw used to fix the strips to the wall and should be placed vertically at equal intervals of 600mm C/C. The PVC strips to be fixed to the wall using 65mm long MS screws though the groove in the strip by using PVC faster complete all as specified and directed.
Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit including all accessories after chasing in brick / stone masonry walls etc, Metal flush box of suitable module, with earth dolly, covered with modular white cover plate & frame for modular switches, sockets, regulators including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly all as specified and as directed for the following
One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed
One ceiling fan point controlled by one, one way switch 6 Amps and regulator
One bell point controlled by one, one way switch 6 Amps complete all as specified and as directed
One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed
One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed
One two way light point controlled by two nos. two way 6A switches complete all as specified and as directed
One light point controlled by controlled by one, one way switch 6 Amps with additional two light points on the same switch circuit complete all as specified and as directed
- Ditto- all as per 84 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 5 pin socket outlet plug point, 6 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly all as specified and as directed
- Ditto- all as per 84 here-in before but using 4.0 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for 6/16 Amps power point including necessary running of 4.0 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly all as specified and as directed
Supply and fixing Modular Switch - 6 Amps, Single pole one way, one module complete all as specified and as directed.
Supply and fixing Modular Switch - 6 Amps, Single pole two way, one module complete all as specified and as directed.
Supply and fixing Modular Bell push - 6 Amps, Single pole one way, one module complete all as specified and as directed.
Supply and fixing Modular Switch - 16 Amps, Single pole one way, one module complete all as specified and as directed.
S & F Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified and as directed.
S & F Modular socket outlet multipurpose 16 Amps, 6 pin-shuttered type, 2 module, complete all as specified and as directed.
Supply and fixing, Ding Dong bell suitable for operation on AC. 230 volts, single pole complete all as specified and as directed.
Supply and fixing modular fan step regulator, 120W - 2 module suitable for ( 48" & 56" fans) supply complete all as specified and as directed.
S & F Ceiling rose, 3 phase / PVC / polycarbonate, complete all as specified and as directed
S & F Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed
Supply only Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/ CFL direct fit lamp, in B-22 cap complete all as specified and as directed
Supply and fixing LED lights fitting 1x22 Watt, 220V, AC decorative box type with driver, holder including LED tube light and mounting PVC rectangular block connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to connector, making good disturbed surfaces complete all as specified and as directed. Make Jaquar cat No LGLZPCX022XW or equivalent in Bajaj/ Hallonix/ Havells
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to connector, making good disturbed surfaces complete all as specified and as directed. Make Jaquar cat No -LGLZ01X010XW or equivalent in Bajaj/ Hallonix/ Havells
Supply and fixing Multicolour changable, recess-mounted, white powder-coated CRCA housing with full mounted acrylic di user (2ft x 2ft) , 36 watt, 220 V AC recessed type complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. Make Jaquar cat No LULT01S036XM
Supply and fixing round shape15 watt 220 volts AC recessed type COB-based, round tiltable LED downlight with multiple beam angles (36 ) complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make- Jaquar Cat No LETS36R015XW
S & F LED light fitting 1x9W / 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.complete all as specified and as directed.
Supply and fixing LED 10 W focus light, Surface mounted, powder coated, die cast aluminium and anodized aluminium reector with clear diffuser, fully adjustable complete with all accessories prewired all as specified and directed. Make- Jaquar Cat No LFCL01R010XW or equivalent
Supply and fixing LED 20 W LED track-mounted, moveable base, round focus light, fully adjustable. Beam Angle 40 . Aluminium Housing (Including Driver Casing) complete with all accessories prewired all as specified and directed. Make- Jaquar Cat No LTRLW1R020XW or equivalent
Supply and fixing decorative wall Lamp Opal Glass fitting 7 Watt with Chrome Finish including Lamp: E-27 7W x 1 complete with all accessories prewired all as specified and directed. Make- Jaquar Cat No KCH-CHR-MB160275541A or equivalent
Supply and fixing LED surface-mounted square panel with aluminium die cast housing 18 Watt fitting including lamp complete with all accessories prewired all as specified and directed. Make- Jaquar Cat No LNRO02S018SW or equivalent
Supply and fixing decorative ceiling Black Outside Inside Orange, Metal & Wood Pendant fitting including Lamp: E-27 9W x 1 complete with all accessories prewired all as specified and directed. Make- Jaquar Cat No JNL-BLK-SL1000 or equivalent
Supply and fix for energy saving new generation environmental friendly long life versatile pressure die aluminium IP-66 for security light fitting luminaire of capacity 30 watt with high power LEDs as light source and electronic driver , necessary mounting arrangements and provision of 1.0 Sqmm 3 core copper conductor cable multistranded from ceiling rose to light fitting including 1.5 metres long GI pipe medium grade bracket of suitable size & shape to light fitting mounting dia, secured and fixed with clamps made out of MS flat iron of size 25mm x 5mm, nuts, bolts etc , as approved, complete all as specified and as directed. Make- Jaquar Cat No LPCRSRT30WXW or equivalent
Supply and fix exhaust fan, AC single Phase, working on input voltage 140-285 , of size 250m sweep, 1200 RPM, Power 20 W with BLDC Motor, blades, frame and louvers provision of 3 core 1.5 sq. mm copper conductor PVC insulated & PVC sheeted flexible wire from ceiling rose/connector to fan including making connections complete all as specified & as directed . Make- Atomberg (EFFICIO)
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, complete all as specified & as directed
M & L for PVC connection pipe (copper) chromium plated 8 mm dia both end threaded incl brass coupling bolt cone washer complete , length of pipe is not less than 450 mm suitable for Hot/ cold water system complete as all specified and directed.
S & F Distribution Board - VTPN 4 Way, 415 volts, 50 Hz, suitable for Flush Mounting and surface Mounting & provision for MCCB as incomer and SP / TP MCB's as outgoing, with 250 A Copper Busbar for each phase, 2 Neutral bar, 2 Earthbar and Cable ties for Cable management, Fully insulated busbar & shrouded Neutral bars IP 43 - #IK 09 with metal door including necessary cement work and electrical connections complete all as specified and as directed.
S & F Distribution Board sheet metal enclosure TPN 4 Way, 415 volts, 50 Hz, suitable for Flush Mounting and surface Mounting & provision for FP MCB / Isolator / RCCB / RCBO as incomer and SP/TP MCB's as outgoing , With 100 A Copper Busbar for each phase, With 2 Neutral bar, 2 Earthbar and Cable ties for cable management, Fully insulated busbar & shrouded Neutral bars IP 43 - #IK 09 with metal door including necessary cement work and electrical connections complete all as specified and as directed.
Supply and fixing Hospitality funtions 15 A key card FOB switch monobloc with new plate - 2M White complete all as specified and as directed. Make- Legrand Cat 6732 37 or equivalent
Supply and fixing MCCB 4 Pole, 100 Amps , Breaking Capacity Ics=100% of Icu, at 415V AC 50Hz. 18 (kA) complete all as specified and as directed.
Supply and fixing amp rating 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN 40 To 100 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning
Taking down carefully existing unserviceable main switch /cutout /DBs of any type, capacity and description and removing materials from site and making good disturbed surfaces of walls, floors as per the existing finishes all as specified and as directed.
Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.
S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 6.0 Sqmm and one single core 6.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed PVC conduit and conduit accessories heavy duty ISI marked complete all as specified and as directed. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).
S & F submain wiring with four single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 10.0 Sqmm and one single core 10.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed PVC conduit and conduit accessories heavy duty ISI marked complete all as specified and as directed. Note ( Four runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length). .
M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried vertically directly in ground (Earth pit not less than 2.25mtr deep below normal ground level and top edge of the plate not less than 1.5 mtr below ground level), connected to and including galvanized steel eathing lead wire 4 mm dia by means of bolts nuts check nuts and washers etc GI pipe 15mm dia medium grade for protection of GI strip both to be provided to the extent of 7.5 meters, all as shown on electrical plate No 3 of MES SSR-2009 Part-I, other end connected to main switch board (inside the bldg) GI protection pipe buried in ground, laid under floors/ plinths or fixed on walls oe concealed in walls etc with provision of mixture of charcoal dust and common salt packed upto minimum 150 mm all around the earth plate , including PCC (1:2:4) type B-1 earth pit with MS angle iron frame , cast iron cover with locking arrangement, with GI 200 dia medium grade pipe and MS funnel with wire mesh for watering arrangement including necessary excavation and earth work in any type of strata and testing on completion. Note:- GI wire 4.0 mm dia and GI pipe 20 mm bore medium grade for encasing GI wire 4.0 mm dia beyond 7.50 M length per earthing if so required at site shall be measured and paid for seperately under relevant items.
Taking down fan, cealing cable end, dismantling blades and removing fan and blades to store from site complete all as specified and as directed.
Supply and fixing ceiling fans working on single phase input voltage 140-285 , Sweep- 1200 mm, Power 28 W, 350 RPM , with 230 Air delivery CMM (m3 /min), complete with compact BLDC Motor, blades, down rods, electronic regulator, with remote and all accessories, including making connections with provision of flexible wire 23 /0.0076 three core copper conductor from ceiling rose/connector to fan complete all as specified & as directed. Make- Atomberg (Effico) 5 Star rated
Supply and fixing Energy Efficient BLDC Motor, wall mounted fan , Power-32 W consumption on high speed, Input voltage 90-245 V-AC single phase, Speed: 1350 RPM ,50 Hz , 400 mm sweep, 3 blade, and making connections complete all as specified & as directed. Make- Atomberg (EFFICIO +)
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.
N B ENTERPRISES
Vijay Construction and Company
M/s.BAJRANG CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .