Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.9 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹33.9 L+₹83,855.05 (2.54%)Rejected-AOC 254 MG ROAD LAMBA LANE JUNGLIGHAT PORT BLAIR SOUTH ANDAMAN ANDAMAN AND NICOBAR ISLANDS 744103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹34.1 L+₹1.0 L (3.17%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹34.1 L+₹1.1 L (3.23%)Rejected-AOC MB 58 JUNGLIGHAT KATHIR MARKETING SERVICE MB 58 JUNGLIGHAT NEAR TCI OFFICE SOUTH ANDAMAN ANDAMAN NICOBAR 744103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L4 | Rejected-AOC Rejected | |
| 5 | L5₹36.7 L+₹3.6 L (11.0%)Rejected-AOC MES WORKS SITE CARNICOBAR ANDAMAN NICOBAR ISLAND | CARNICOBAR | NICOBAR | ANDAMAN AND NICOBAR ISLANDS | 744301 | L5 | Rejected-AOC Rejected |
Tender Value
₹32 L
EMD Value
₹64,000
Closing Date
25 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) Campbell Bay
GE (I) Campbell Bay, Army Land, Great Nicobar-744302
PROVISION OF WASHROOMS FOR WATCH TOWERS AND RAIN WATER HARVESTING TANK FOR OTM BUILDING AT INS KARDIP, KAMORTA
2022_MES_529780_2
8811/E8
Open Tender
Civil Works
Item Rate
180 days
GE (I) Campbell Bay
Please refer Tender Documents
8 documents required · 8 mandatory
₹500
Yes
GE (I) Campbell Bay
₹64,000
28 Nov 2022
11 Jul 2022
27 Jul 2022
12 Jul 2022
25 Jul 2022
19 Jul 2022
Amount
Suface Excavation not exceeding 30cm and average of 15cm in any type of soil. complete all as specified and as directed.
Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in any type of soil complete all as specified and as directed.
Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in soft / loose soil complete all as specified and as directed.
Excavation over areas, n.exc 1.5 deep and getting out in soft/loose soil complete all as specified and as directed
Excavation over areas,exc 1.5M deep and n exc 3 M and getting out in soft/loose soil complete all as specified and as directed
M & L hardcore of broken stone or boulders of gauge n.exc.63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface,complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in hard and dense soil all as specified and as directed
Removing excavated materials (soil) not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.
M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete including necessary form work complete all as specified and as directed.
M&L PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in bed to drain pipes including packing under haunching against the sides of pipes after laid and tested for CI pipes of 100 mm bore, complete all as specified and as directed.
M&L PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete including necessary form work complete all as specified and as directed.
M&L PCC 1:2:4 type B-1 (using 20mm graded Stone Aggregate) 25mm thick as in sub base Flooring, etc., finished Concrete Surfaces Even and rough, complete all as specified and as directed.
M&L PCC 1:2:4 type B-1 (using 20mm graded Stone Aggregate) as in coping, surface channels, benchings,etc. of manholes finished fair and even , complete all as specified and as directed.
M&L for precast man hole covers with plain faces using RCC 1:2:4 type B-1 (using 20mm graded Stone Aggregate) and set in CM 1:4 including necessary form work , complete all as specified and as directed.
M&L for 150 mm dia CI pipe (sand cast ) in any length with or without ear laid in trenches and jointed in CM1:1 , complete all as specified and as directed.
M & L providing 75mm thick plain cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) finishing even and rough to receive top layer complete all as specified and as directed.
M & L providing 75mm thick plain cement concrete 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection complete all as specified and as directed.
M&L non-skid ceramic tiles coloured of size 300x300x7 to 8 mm thick tiles conforming to IS- 13712, grade B-II-(a) set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including screed bed layer 15mm thick in cement mortar 1:6 as in floors, finished even and rough complete all as specified
S&F glazed ceramic coloured tiles of size 300x200x7mm thick in vertical surfaces such as skirting/dados conforming to IS-13712 grade B-III set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed layer 15 mm thick in cement mortar 1:4 finished even and rough for receiving tiles complete all as specified.
M & L reinforced cement concrete M-30 (Design Mix Concrete) using 20mm graded aggregate in foundations, including rafts, footings, plinth beams, bases for columns, etc. basement slabs, under ramed piles and mass concrete including necessory form work complete all as specified and as directed.
M & L reinforced cement concrete M-30 (Design Mix Concrete) using 20mm graded stone aggregate in walls, retaining walls, basement wall and the like, any thickness above top of footings, including atached pillaster and buttresses including necessary form work complete all as specified and as directed.
M & L reinforced cement concrete slabs M-30 (Design Mix Concrete using 20mm graded aggregate) supported on walls, beams and columns in floors,roofs,landings,balconies,canopies,deck slabs and in selves complete all as specified and as directed.
M & L Formwork to faces of walls, vertical or to batter curved surface for fai finished surface, complete all as specified and as directed.
Formwork to soffits of supended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)
M&L TMT bars 10mm dia and over, as reinforcement. cut to length, bent to shape required including crancking bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified.
M&L TMT bars 6 to 8mm dia . cut to length, bent to shape required including crancking bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified.
S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St-240 including painted one shop coat of zinc chromate prime paint including preparation of surfaces complete all as specified and as directed.
S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.
S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.
Material and Labour for Pre-cast cement concrete block masonry 1:3:6 type C1 using 20 mm graded aggregate with solid blocks, exc. 10 cm in width and setting in cement mortar1:6, complete all as specified and directed
Material and Labour for Pre-cast cement concrete solid building blocks or slabs 10 cm thick ( with plain or interlocking joints )and setting in cement mortar1:4, complete all as specified and directed
M & L rendering 15mm thick on fair faces of brick wall or concrete surfaces in cement mortar (1:4) finished fair and even without using extra cement complete all as specified and directed.
M & L rendering 15mm thick on fair faces of brick wall or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed.
M & L rendering 10mm thick on fair faces of brick wall or concrete surfaces in cement mortar (1:6) finished fair and even without using extra cement complete all as specified and directed.
Extra for forming fair finished channel or drain 30 cm inner girth in cement concrete using extra cement including forms,moulds,stopped ends etc.mortar (1:6) finished fair and even without using extra cement complete all as specified and directed.
Material and Labour for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.
S&F 75mm bore PVC (SWR) pipe single socketed in any length fixed to wall with ruibber ring joint complete all as specified.
Material and Labour for cohesive force and centrifugal force plastro rain water harvesting filter of 110mm size with maximum capacity of 225lpm and having an 75 mm/hr intensity of rain with operating pressure< 2 ft head,Inlet:110 mm,Outlet:75 mm,,Drain Outlet:90 MM, Filter Element :SS-304 Screen,Mesh Size: 250 Microns.
Supplying,laying or fixing in replacement of GI water tubing of 50 mm dia, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, ceiling, and laid on floors complete all as specified andcomplete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing of GI water tubing of 15 mm dia, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, ceiling, and laid on floors complete all as specified andcomplete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing of GI water tubing of 20 mm dia, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, ceiling, and laid on floors complete all as specified andcomplete all as specified and as directed by the Engineer-in-Charge.
S&F framed brackets of angles or tees with web and flanges cut to shape,drilled and countersunk for screw, including bending and welding angles,as necessary ,gusset plates ,riveting ,etc n.exc 10kg each brackets ,conforming to Fe 290 Gde E-165 complete all as directed
M&L two coat of oil bound distemper over a coat of cement primer including prepration of new wall surfaces complete all as specified and as directed
M&L for mild steel flat iron bent to shape, holes drilled etc complete as wind ties etc includig one coat of red oxide primer complete all as specified and as directed.
S & F vitreous china, water closet pedestal pattern (white) excluding fixing flush pipe for flushing cistern and fixing of flushing cistern complete all as specified and as directed. Note : Flushing cistern and flush pipe shall be measured under relevent items.
Supply only 10 Ltrs (PVC) white, valve less, syphonic action type, dual type fluhsing cistern, low level with inlet ball valve, float and top push button type, complete all as directed.
S & F vitreous china,white, wash hand basin, angle back size 600x480mm conforming to IS-2556 (Part-4) including MS brackets including cutting for and pinning in, but excluding waste pipe, waste fittings etc complete all as specified and as directed.
S&F vitreous china urinals, half stall type, white (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe etc complete all as specified and as directed.(Exclusive of fixing supply pipe to flushing cistern trap and waste pipe)
S & F Flush pipe of polyethylene of low or high or PVC 32mm dia, for loe level level flushing cistern etc complete all as specified and as directed.
S & F 15 mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and as directed.
S&F15 mm dia brass chromium plated pillar tap, with capstan head, screwed down pressure with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, screwed for iron pipe complete all as specified and as directed.
S&F Towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) complete all as specified and as directed
S&F waste fittings 32mm bore, brass chromium plated conforming to IS-2963 for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange and bed deal in red lead cement and other end complete all as specified and as directed
S&F 32mm dia bore waste couplings of PTMT (Half or full threaded) minmum weight of 45 gms complete all as specified and directed.
S&F for shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300 gms) complete all as specified and as directed
S&F plastic water closet seat back , closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and as directed.
S&F PVC connections 15 mm size with brass check nut with washers and length of connection is 450 mm complete all as specified.
S & F swivel shower rose 125mm of brass chromium plated with long head for fixing with 15mm dia steel pipe complete all as specified and as directed.
S&F grating doom 100mm dia of PTMT approved quality (minimum weight 25 gms) complete all as specified.
S & F PVC (SWR) gully trap 125/110mm square or round mouthed type 'S' setting and jointing with solvent cement complete all as specified.
S&F 30mm thick (style) factory made solid panel PVC door shutter consisting of frame made out of MS tubes for top & bottom rails & MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail & panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per complete all as specified.
S&F solid core PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification complete all as specified.
S&F for MS Work such as rungs, handles to manholes,etc. complete all as soecified and as directed.
Supply only integral water proofing compound, ISI marked complete all as specified.
Material and labour for point wiring with 1.5 sqmm PVC insulated, unsheathed FRLS multistrand copper conductor cable 1100 volts grade drawn into and including non metallic rigid PVC conduit medium grade not less than 20mm dia ISI marked ivory colour/ caping casing as per site requirement with all conduit fittings and fixing accessories including PVC boxes for mounting switches, sockets, fan regulators etc incl 1.5 sqmm FRLS multistrand copper conductor cable as continuous earth wire complete for One light point controlled by one switch
Supply and fix switch piano, flush type single pole, one way 5 Amp
Supply and fix ceiling rose PVC/ polycarbonate insulated body with three terminals
Supply and fix surface mounting 20 W LED tube light fitting nominal system lumen output of 2000 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a colour temperature of 6500K and CRI>83. pre wired connection up to tube light fitting with connecting up with copper 2 core flexible cord of minimum size 1.0 sqmm and white in colour. The luminaire shall meet IP 20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W (including driver) complete all as specified and as directed. Make : Phillips/Bajaj/Wipro/CG
S&F exhaust fans including louvers AC single phase 240 volts of size 300 mm sweep and minimum 1350 RPM including flexible wire 3 core 1.5 sqmm from exhaust fan to ceiling rose all as specified and as directed
Supply and fix sheet metal enclosure for DB's single pole and neutral, double door 240V, 4 way with 200 Amps rated bus bar. Make- Legrand/L&T/Havells
Supply and fix MCB SP 6 to 32 Amps 10 KA. "C" Series Make Legrand/L&T/Havells
Supply and fix MCB DP 40 Amps 10 KA. "C" Series Make Legrand/L&T/Havells
Kakolil Trade Agencies
M/s S U Enterprises
Kathir Marketing Services
ASHOK BISWAS
MGP Enterprises
T.THIYAGARAJAN
bansal construction
NAVJEEVAN ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .