Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.4 LAccepted-AOC | ₹49.4 L | L1 | Accepted-AOC BEING LOWEST BIDDER |
| 2 | L2₹49.7 L+₹22,075 (0.45%)Rejected-AOC KOHLI NO 17509 GALI KHADDAR BHANDAR WALI BHI WALA ROAD BATHINDA PB 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | ₹49.7 L+₹22,075 (0.45%) | L2 | Rejected-AOC OTHER THAN LOWEST BIDDER |
| Sl No | Description | Qty | Unit | M/s BHUPINDRA ENGINEERING WORKS L2 | BISHNOI BUILDERS L1 |
|---|---|---|---|---|---|
| .10Notes:- (i) 100 percent nonperishable items of the work shall be deposited by the L1 bidder within 30 days after placing of work order. (ii) The critical path network shall be submitted by L1 bidder immediately after the acceptance of tender and approved by GE. (iii) The bidders must ensure to visit the site, check relevant documents and makes of materials required to be incorporated under the subject from concern Engineer-in-Charge. (iv) The unserviceable material obtained under the schedule of credit shall be handed over to the contractor by the Engineer-in-Charge on a proper gate pass. (v) In case of non-availability of any make mentioned under list of Makes, the L1 Bidder shall obtain non-availability / non-manufacturing certificate from the concern OEM / authorised dealers and submitted to Accepting Officer, the L1 bidder may be incorporated Group-I category makes as approved by HQ CE SWC Jaipur and HQ CE BTZ in the works after prior approval of Accepting Officer. (vi) L1 Bidder shall produce E-way bill alongwith test certificate from OEM / manufacturer for costly items / major items of amount above Rs 50,000/- along with RAR’s and Final Bill. (vii) L1 Bidder shall be maintained an album containing Photos of all the material brought at site and each stage wise work progress and kept at site. Same shall be deposited in Engineer-in-Charge office after completion of work. (viii) The cost of all the above provisions shall be deemed to be included in the quoted rate of bidder, nothing extra shall be paid to the bidder.viii) The cost of all the above provisions shall be deemed to be included in the quoted rate of bidder, nothing extra shall be paid to the bidder. (ix) If a bidder observes any item in the BOQ that appears to be "Freakishly Low" or technically not required for execution at the site, the bidder must submit written comments to the Accepting Officer during the pre-tender stage or at least 07 days before the Bid Submission Start Date. (x) Any act by the contractor that is found to be against the interest of the Department,or commits misconduct or any complaint received through proper channels and supported by verifiable proof (e.g., fraudulent vouchers, negligence in execution, or attempt to cause undue benefit), shall be treated as a willful default.Such defaults shall render the contractor liable for an Adverse Remark ("NO") in the Quarterly Work Load Return (WLR), barring the firm and its related/sister concerns from participating in further tenders. | |||||
| 1.00 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set in tile adhesive confirming to IS-15477-2019 type 1 and thickness as per manufacturer instruction of approved make including dimantling of existing floor tiles/finishes and rubbish off premises complete all as specified and as directed by Engineer-In-Charge. Note:-1. Joints of tiles shall be filled with appropriate white cement base grouting compound to match the colour of tiles complete quoted rates deemd to be included it nothing extra shall be paid on this account. 3. 15 mm thickScreed bed deemed to be included in quoted rates. | 35 | Square metre | 1,100 ₹38,500 | 970 ₹33,950 Lowest |
| 2.00 | M&L for glazed ceramic tiles (coloured) 600mm x 300mm x 7mm thick on vertical surfaces such as dado, skirting etc., set in tile adhesive confirming to IS-15477-2019 type 2 and thickness as per manufacturer instruction of approved make including dismantling existing wall tile/ fineshes and rubbish off premises complete all as specified and as directed by Engineer-In-Charge Note:-1. Joints of tiles shall be filled with appropriate white cement base grouting compound to match the colour of tiles complete quoted rates deemd to be included it nothing extra shall be paid on this account. 2.Corners of floor and wall tiles in bathroom area shall be filled with white Silicon Gel quoted rates deemd to be included it and nothing extra shall be paid on this account 3. 10 mm thick rendering on brick wall other than fair faces deemed to be included in quoted rates. | 80 | Square metre | 1,100 ₹88,000 | 1,000 ₹80,000 Lowest |
| 3.00 | S&F Vitrified Ceramic tiles 8-9mm thick (square/rectangular) double charged , area of each tiles n exc. 0.36Sqm, in floors and as in skirting of 0.10m height etc laid with minimum 3 mm spacer filled with Epoxy Resin of make :- Atul,BASF,Aditya birla,3M ,,set with Type -1 cement base adhesive As Per IS-15477-2019. complete as specified by Manufacturer complete. all as specified and as directed By Engineer-In-Charge. | 180 | Sqm | 1,000 ₹1,80,000 Lowest | 1,077 ₹1,93,860 |
| 4.00 | M&L for glazed Vitrified tiles (coloured) 600mmx1200mm 8-9 mm thick on vertical surfaces , set in tile adhesive confirming to IS-15477-2019 type 2 and thickness as per manufacturer instruction of approved make including dismantling existing wall tile/ fineshes and rubbish off premises complete all as specified and directed.
Note:-1. Joints of tiles shall be filled with appropriate white cement base grouting compound to match the colour of tiles complete quoted rates deemd to be included it nothing extra shall be paid on this account.
3. Tiles shall be fixed with minium 3 mm spacers filled with epopxy resin colour as approved by engineer-In Charge of Make:- Atul/BASF/AdityaBirla/3M. | 600 | Sqm | 1,120 ₹6,72,000 Lowest | 1,247 ₹7,48,200 |
| 5.00 | S&F as in repair of 20 mm nominal bore dia CPVC pipes SDR 11 & Plain/Brass fittings(Elbow,Tee,MTA,FTA,Union) CPVC SDR 11 fittingsof Make:- Astral/Aashirwad/Tata wondra on walls/ceiling or laying in floors including plug at opening or points for fiting and fixtures and powder coated clamps for fixing in walls complete all as all fittings and fixed and taking down of existing 15 mm bore pipe of any descripttion complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-charge. | 200 | Running Metre | 300 ₹60,000 | 210 ₹42,000 Lowest |
| 6.00 | S&F as in repair of 25 mm nominal bore dia and laying of CPVC pipes SDR 11 & Plain/Brass(Elbow,Tee,MTA,FTA,Union,Tank Adapter,) CPVC SDR 11 fittings of MAKE:-Finolex/Ashirwad/Prince or equivalent technocommercial as mentioned in Appx A here in after on walls/ceiling or laying in floors including plug at opening or points for fiting and fixtures and powder coated clamps for fixing in walls complete all as all fittings and fixed and taking down of existing 20 mm bore pipe of any descripttion complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-charge. | 350 | Running Metre | 270 ₹94,500 | 237 ₹82,950 Lowest |
| 7.00 | S&F as in repair for special fittings ball valve for connecting of CPVC tubing outer dia 20/25 mm as specified and directed by Engineer -in-charge. | 40 | Each | 70 ₹2,800 Lowest | 90 ₹3,600 |
| 8.00 | Disconnecting & taking down the existing unserviceable water tank and Supply and fixing of 500 Litre capacity 4 layer antimicrobial tank hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I and as directed. Note :- Quoted Rates deemed to be inclusive of fixing 20mm PTMT Float valve ISI Marked complete all as specified and as directed.
Note Contractor will submiot manufacturer warranty Certificate with Batch No. and Date Of Purchasing. and contractor will mark Date Of Fixing and CA No. on Tank with Synthetic Enamel Paint in words not less than 6" in Height nothing extra shall be paid on this account.
MAKE: Sintex Pure /Polycon /Ganga or equivalent technocommercial as mentioned in Appx 'A' herein after. | 10 | Each | 5,000 ₹50,000 | 4,300 ₹43,000 Lowest |
| 9.00 | Disconnecting & taking down the existing unserviceable water tank and Supply and fixing of 1000 Litre capacity 4 layer antimicrobial tank hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I and as directed. Note :- Quoted Rates deemed to be inclusive of fixing 20mm PTMT Float valve ISI Marked complete all as specified and as directed
Note :- Contractor will submiot manufacturer warranty Certificate with Batch No. and Date Of Purchasing. and contractor will mark Date Of Fixing and CA No. on Tank with Synthetic Enamel Paint in words not less than 6" in Height nothing extra shall be paid on this account.
MAKE: Sintex Pure /Polycon /Ganga or equivalent technocommercial as mentioned in Appx 'A' herein after. | 3 | Each | 10,000 ₹30,000 | 7,700 ₹23,100 Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
30 Jul 2026, 6:00 pmClosed
GE (A) SURATGARH
GE (A) SURATGARH MIL STATION
COMPREHENSIVE MAINTENANCE OF OFFRS MD ACCN BLDG NO 24/4,6/2,2/1,37/2,37/4,36/3, P-27/2 IN KHETRAPAL ENCLAVE AND OTHER AREA OF AGE B/R-II UNDER GE(A) SURATGARH AT SURATGARH MIL STN
2026_MES_773303_1
GE(A)/SOG-TOKEN-21/2026-27
Open Tender
Civil Works
Item Rate
120 days
IN THE AOR OF GE (A) SURATGARH
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE(A) SURATGARH
₹90,000
Yes
21 Sept 2026
19 Jun 2026
1 Aug 2026
19 Jun 2026
30 Jul 2026
16 Jul 2026
19 Jun 2026 - 2 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set in tile adhesive confirming to IS-15477-2019 type 1 and thickness as per manufacturer instruction of approved make including dimantling of existing floor tiles/finishes and rubbish off premises complete all as specified and as directed by Engineer-In-Charge. Note:-1. Joints of tiles shall be filled with appropriate white cement base grouting compound to match the colour of tiles complete quoted rates deemd to be included it nothing extra shall be paid on this account. 3. 15 mm thickScreed bed deemed to be included in quoted rates. | 35 | Square metre | - | - |
| 2 | M&L for glazed ceramic tiles (coloured) 600mm x 300mm x 7mm thick on vertical surfaces such as dado, skirting etc., set in tile adhesive confirming to IS-15477-2019 type 2 and thickness as per manufacturer instruction of approved make including dismantling existing wall tile/ fineshes and rubbish off premises complete all as specified and as directed by Engineer-In-Charge Note:-1. Joints of tiles shall be filled with appropriate white cement base grouting compound to match the colour of tiles complete quoted rates deemd to be included it nothing extra shall be paid on this account. 2.Corners of floor and wall tiles in bathroom area shall be filled with white Silicon Gel quoted rates deemd to be included it and nothing extra shall be paid on this account 3. 10 mm thick rendering on brick wall other than fair faces deemed to be included in quoted rates. | 80 | Square metre | - | - |
| 3 | S&F Vitrified Ceramic tiles 8-9mm thick (square/rectangular) double charged , area of each tiles n exc. 0.36Sqm, in floors and as in skirting of 0.10m height etc laid with minimum 3 mm spacer filled with Epoxy Resin of make :- Atul,BASF,Aditya birla,3M ,,set with Type -1 cement base adhesive As Per IS-15477-2019. complete as specified by Manufacturer complete. all as specified and as directed By Engineer-In-Charge. | 180 | Sqm | - | - |
| 4 | M&L for glazed Vitrified tiles (coloured) 600mmx1200mm 8-9 mm thick on vertical surfaces , set in tile adhesive confirming to IS-15477-2019 type 2 and thickness as per manufacturer instruction of approved make including dismantling existing wall tile/ fineshes and rubbish off premises complete all as specified and directed.
Note:-1. Joints of tiles shall be filled with appropriate white cement base grouting compound to match the colour of tiles complete quoted rates deemd to be included it nothing extra shall be paid on this account.
3. Tiles shall be fixed with minium 3 mm spacers filled with epopxy resin colour as approved by engineer-In Charge of Make:- Atul/BASF/AdityaBirla/3M. | 600 | Sqm | - | - |
| 5 | S&F as in repair of 20 mm nominal bore dia CPVC pipes SDR 11 & Plain/Brass fittings(Elbow,Tee,MTA,FTA,Union) CPVC SDR 11 fittingsof Make:- Astral/Aashirwad/Tata wondra on walls/ceiling or laying in floors including plug at opening or points for fiting and fixtures and powder coated clamps for fixing in walls complete all as all fittings and fixed and taking down of existing 15 mm bore pipe of any descripttion complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-charge. | 200 | Running Metre | - | - |
| 6 | S&F as in repair of 25 mm nominal bore dia and laying of CPVC pipes SDR 11 & Plain/Brass(Elbow,Tee,MTA,FTA,Union,Tank Adapter,) CPVC SDR 11 fittings of MAKE:-Finolex/Ashirwad/Prince or equivalent technocommercial as mentioned in Appx A here in after on walls/ceiling or laying in floors including plug at opening or points for fiting and fixtures and powder coated clamps for fixing in walls complete all as all fittings and fixed and taking down of existing 20 mm bore pipe of any descripttion complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-charge. | 350 | Running Metre | - | - |
| 7 | S&F as in repair for special fittings ball valve for connecting of CPVC tubing outer dia 20/25 mm as specified and directed by Engineer -in-charge. | 40 | Each | - | - |
| 8 | Disconnecting & taking down the existing unserviceable water tank and Supply and fixing of 500 Litre capacity 4 layer antimicrobial tank hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I and as directed. Note :- Quoted Rates deemed to be inclusive of fixing 20mm PTMT Float valve ISI Marked complete all as specified and as directed.
Note Contractor will submiot manufacturer warranty Certificate with Batch No. and Date Of Purchasing. and contractor will mark Date Of Fixing and CA No. on Tank with Synthetic Enamel Paint in words not less than 6" in Height nothing extra shall be paid on this account.
MAKE: Sintex Pure /Polycon /Ganga or equivalent technocommercial as mentioned in Appx 'A' herein after. | 10 | Each | - | - |
| 9 | Disconnecting & taking down the existing unserviceable water tank and Supply and fixing of 1000 Litre capacity 4 layer antimicrobial tank hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I and as directed. Note :- Quoted Rates deemed to be inclusive of fixing 20mm PTMT Float valve ISI Marked complete all as specified and as directed
Note :- Contractor will submiot manufacturer warranty Certificate with Batch No. and Date Of Purchasing. and contractor will mark Date Of Fixing and CA No. on Tank with Synthetic Enamel Paint in words not less than 6" in Height nothing extra shall be paid on this account.
MAKE: Sintex Pure /Polycon /Ganga or equivalent technocommercial as mentioned in Appx 'A' herein after. | 3 | Each | - | - |
| 10 | Disconnecting & taking down the existing unserviceable water tank and Supply and fixing 700 Litre capacity 4 layer antimicrobial tank hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I and as directed.
Note :- Quoted Rates deemed to be inclusive of fixing 20mm PTMT Float valve ISI Marked complete all as specified and as directed.
Note Contractor will submiot manufacturer warranty Certificate with Batch No. and Date Of Purchasing. and contractor will mark Date Of Fixing and CA No. on Tank with Synthetic Enamel Paint in words not less than 6" in Height nothing extra shall be paid on this account.
of MAKE: Sintex Pure /Polycon /Ganga or equivalent technocommercial as mentioned in Appx 'A' herein after. | 3 | Each | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.43 MB
BOQ_865923.xls
BOQ • 0.49 MB
T21.pdf
Tender Documents • 1.39 MB
Token21.pdf
PDF • 0.07 MB
Cori1.pdf
PDF • 0.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .