SPECIAL REPAIRS TO TOILET BATH URINAL AND SUNKEN PORTION TO BLDGS NO P 341 KHA COY UNDER GE NORTH BANGALORE

Amount

Demolition of brick work /stone masonry/PCC block masonry built in cement mortar of any description all as specified and directed.

Demolition of cement concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed

Dismantling of Stone set paving of any description or thickness in floors, aprons etc (Laid bedded and pointed in any cement mortar) incl removing off the premises etc complete all as specified and as directed

Taking down cement plaster of any description hacking for key or raking out joint on old brick work / stone / concrete surface etc complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc (Disturbed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc (Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified and as directed

Taking down steel tubing & connections including cleaning for refixing serviceable pipe and removal balance pipe of 20 mm dia bore complete all as specified and as directed

All as per item No 9 above but for 25 mm dia bore

Dismantling of cast iron or reinforced concrete drain / PVC soil waste pipe up to 150mm dia incl fittings, jointed in cement mortar and taking out of trenches if reqired etc complete all as specified and directed

Dismantling water tanks exc 500ltr but not exc 1000 ltr and removing etc complete all as specified and as directed

All as per item no 12 above but exc 1000 ltr & not exc 2000 ltr capacity

M&L for 25 mm thick Cement concrete type B-0,1:2:4 (12.5mm graded stone aggregate) as in levelling course of flooing etc complete all as specified and as directed

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

M&L for 18 to 20mm thick granite Granite stone slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit including grinding the edges half round and polishing including etc complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat of dado / skirting etc complete all as specified and as directed

M&L Glazed ceramic coloured tiles 300X450X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and and as directed

M&L for 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded stone aggregate as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade "A" complete all as specified and directed.

M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed

M&L Pre-cast Cement concrete C 1 block masonry Type 1:3:6 using (20 mm graded stone aggregates) with solid blocks, exc 10 cm in width and setting in CM 1:6 all as specified and directed.

M&L for rendering for ceiling 5 mm thick in CM 1:3 on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:4) on other than fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

M&L for rendering 10 mm thick in CM (1:3) on fair faces of brick work or concrete surface mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

M&L for removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.60kg / Sqm reinforced with non woven polyster / HMHDPE matt black finished over compatible primer/bonding bitumen @ 0.40 Litr / Sqm and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturers instructions and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm complete all as specified and directed incl taking down existing roof treatment of any types incl HP clay tiles etc along with cement plastering etc complete all as specified and directed.

M&L providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs / Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed

Supply only liquid water proofing compound

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified etc. complete shall as specified and as directed

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed

S & F for solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed.

S&F 150 mm long Aluminium anodised tower bolt of extruded section etc complete all as specified and as directed

S&F 100 mm thick stainless steel butt hinges, heavy weight, and fixed etc complete all as specified and as directed

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed '

M&L for Providing precast cement concrete Type B-1 1:2:4 (20 mm graded stone aggregates) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:6 including necessary form work etc complete. Note :- Reinforcement steel will be measured and paid separately.

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed

S & F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified.

All as per item No 42 above, but 25 mm dia of bore pipe

M & L rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 2000 ltrs complete all as specified and directed

All as per item 44 above, but 1000 ltr capacity

S & F 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed [Minimum weight for 20 mm – 210 gms] .

S & F in repairs 25 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

M&L for providing and laying water proofing treatment to sunken portion of WCs, bathroom and kitchen etc by applying cement slurry mixed with two component Elastomeric Acrylic based polymer modified cementitious composite compound coating of make as approved in TI 5/2003 including demolition and removal the same from site of existing treatment of any type. The following procedures to be adopted during the execution of work :-(i) Demolition of existing treatment of any type including cleaning and removal of debris from site. (ii) First layer of slurry of cement @ 0.488 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 kg/sqm. The layer will be allowed to air cure for 4 hours. (iii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with with Acrylic based polymer modified cementitious composite compound @ 0.126 kg/sqm. The layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (iv) 20mm thick screed in cement mortar 1:3 mixed with liquid water proofing compound as per manufacturers instructions above the treated area. (v) Ponding the treated portion atleast 48 hours. if any leakage/seepage observed the entire procedures will be repeated without any extra cost. (vi) Provide 40mm dia light grade GI spout at the lowest point with 30cm projection beyond the out face of the wall. (vii) Sunken portion shall be filled with lean concrete 1:5:10 type E-2(using 40mm graded stone aggregate).

S&F in repairs vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, 32 mm bore waste stainless steel coupling and LDPE pipe 600 mm long complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat , black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete of cera model cat pt no. 2008 incl plastic EWC seat cover, coloured closed pattern with flat bottom and cover of cera model cat pt 2308 and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed

S&F in repairs viterous china squatting pan orrisa pattern of size 580X440 mm white with integral foot rest 'P' trap including connecting to trap incl S trap or P trap and flush pipe anti-symphonage pipe etc complete all as specified and as directed

S&F in repairs Viterous China urinals, bowl type (back or corner wall type), complete fixed in repairs including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.

S&F in repair PVC flushing cistern with flush out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, etc complete all as specified and as directed

S&F in repair 15mm dia Pillar tap PTMT fancy type any long body colour screwed, for iron pipe etc complete all as specified and as directed

S&F in repair 15 mm bore dia Bib tap fancy type long body standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 120gms)

S&F in repairs 125 mm dia bore Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms)

S&F in repair 15mm dia stop cock / angle / Concealed cock PTMT fancy type any colour screwed, for iron pipe and fixed etc complete all as specified and as directed

S & F PVC connection 15 mm size with PTMT nuts of length 450 mm, all as specified and as directed.

S&F PVC urinal waste pipe 32mm dia 800mm long, complete all as specified and directed

S&F in repairs 75 mm dia bore PVC (SWR) multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed

S&F in repairs for Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed.

S&F in repairs soap dish holder with glass etc complete all as specified and as directed (Make Cat no BA-25G of Prayag of equlavent make of Cera)

S&F in repairs Hand shower (Health faucet) (ABS Body) with 8 mm dia, 1.20 mtr long flexible tube & wall hook etc complete all as specified and as directed Prayag of equlavent make of Hindware)

S&F in repairs SS Grab bar Towel rail 600 mm long incl fixing arrangement etc complete all as specified and as directed (Make Cat no GM-04 of Prayag of equlavent make of Hindware)

S&F 110mm PVC, SWR pipes, single socketed in any length with rubber ring joint laid in trenches or in floor complete all as specified and directed

All as per item No 66 above but fixed with wall complete all as specified and directed

S&F 75mm PVC, SWR pipes, single socketed in any length with rubber ring joint laid in trenches or in floor complete all as specified and directed

All as per item No 68 above but fixed with wall complete all as specified and directed

S&F PVC bends (any radius) of 110mm dia with access door etc complete all as specified and as directed

S&F 110 mm dia PVC Branch Pieces double (double Y) equal or unequal of 110mm dia etc complete all as specified and as directed

S&F 110 m dia PVC (SWR) junction single, (Single T) equal or unequal etc complete all as specified and as directed

S&F PVC vent cowls of 110mm dia etc complete all as specified and as directed

S&F PVC bends (any radius) of 75mm dia with access door etc complete all as specified and as directed

S&F 75mm dia PVC Branch Pieces double (double Y) equal or unequal of 110mm dia etc complete all as specified and as directed

S&F PVC (SWR) junction single, (Single T) equal or unequal etc complete all as specified and as directed

M&L for preparing new plastered surface of ceiling and applying three coat of white wash etc complete all as specified and as directed

M&L for preparing Old Plastered surface of ceiling and applying two coat of white wash etc complete all as specified and as directed

M&L for preparing new plastered surface of wall and applying three coat of white wash etc complete all as specified and as directed

M&L for preparing Old Plastered surface of wall and applying two coat of white wash etc complete all as specified and as directed

M&L for preparing newely plastered surface of wall and applying two coat of Weather proof Paint (Apex Ultima) over a coat of weather proof primer etc complete all as specified and as directed

M&L for preparing Old plastered surface of wall and applying applying two coat of Weather proof Paint (Apex Ultima) etc complete all as specified and as directed

M&L for Preparation of Old Steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

Removing building materials (Debries) to a distance of exc 1.0 Km but not exc 1.50Km including loading, unloading and stacking at the destination etc complete all as specified and as directed

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc incl painting with same colour of the back ground complete all as specified and as directed by Engineer-in-Charge.

Point wiring complete with 1.5 Sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit incl accessories concealed type run on walls/ ceiling incl MS terminal boxes fabricated with 1.6 mm thick MS sheet surface mounted/ concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. (a) One light / fan point controlled by one switch

As per item No 86 above but for One 3 pin socket out let 5 Amps on independent board

As per item No 86 above but for One 3 pin socket out let 5 A on same board

Point wiring complete with 2.5 Sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit incl accessories concealed run on walls/ ceiling incl MS terminal boxes fabricated with 1.6 mm thick MS sheet surface mounted/ concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. Note for Item No 2 & 3 :- (i) The earth wire for the points in the same circuit can be looped from point to point (ii) Earth wire shall be taken inside the conduit (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring. (v) Cost of cutting chases for conduits and making good to walls, in case of recessed or concealed conduit wiring will be included in point wiring.

S&F LED batten suitable for indoor applications 20 Watts, 4 feet with extruded aluminium housing & integrated LED channel complete with all accessories including taking out old fittings all as specified and directed. Make: Bajaj, Cat No. BCLAB 20 WH LED P or equivalent Makes & model in Havells/Phillips/CG

S&F switch piano flush type single pole one way 5amps

S&F of Switch socket combination 2 in 1 , 5 Amps flush type all as specified and as directed

S&F of switch socket combination 2 in 1, 3 pin 5 and 15 Amps flush type universal all as specified and as directed

S&F in replacement of MCB SPN 240 volts 32/40 Amps complete all as specified and as directed

S&F in replacement of MCB single pole 240 volts 10/16/20/32 Amps complete all as specified and as directed

S&F in replacement of MCB DB SPN 8 way double door type 240 volts with 200 Amps rated busbar as specified and as directed.

S&F in replacement of MCB DB SPN 4 way double door type 240 volts with 200 Amps rated busbar as specified and as directed.

S&F in replacement of ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed

Removing of old existing and provision of new sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 6 Sqmm along with 6 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run along with suitable size of PVC casing caping all as specified and as directed

Removing of old existing and provision of new sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 4 Sqmm along with 4 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run along with suitable size of PVC casing caping all as specified and as directed

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe wire mesh and lugs, incl test point complete all as specified and as directed.

Supply and fixing 30 W LED bldg security light fitting with pressure die cast housing along with prismatic polycarbonate difuser with IP 66 protection including taking out old fittings. Make:- Bajaj, Cat No.:- ENXT P 30L WH SY PC SD or Equivalent Makes & model

S&F GI Bracket made out of GI tubing medium grade 25 mm bore , approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm , nuts, bolts, washers etc and including before fixing applying two coats of aluminum paint over a coat of red oxide primer including removing the old existing GI bracket from bldg complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. all as specified and directed.

S&F in replacement of Single pole & neutral enclosure 20 Amps & 240 V with two pin and earth plug and socket complete with one single pole MCB 20 Amps.

Suresh painters

Sangam Construction

Eeguchi Constructions

M/s STAR ELECTRICALS

M/S SIRI BUILDERS

ABHISHEK CONSTRUCTIONS

J PUSHPALATHA ENGINEER AND CONTRACTOR

PRIYADARSHINI CONSTRUCTIONS

Bidder Name

PRIYADARSHINI CONSTRUCTIONS