SPL REPAIR TO SEWAGE LINE AND MANHOLE AT E/M INSTALLATIONS AND OTHER SANCTIONED WORKS OF AGE B/R-I AREA UNDER GE PANAGARH (3RD CALL)

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil ,complete all as specified and directed.

All as per item No 1.00 mentioned here-in-above but depth exc 1.5m but n.exc 3m complete all as specified and directed.

Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil ,complete all as specified and directed.

Returning, filling in incl spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft /loose soil complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50 Metres and depositing where directed at a level n. exc. 1.5 M above the starting point complete all as specified and directed.

Removing excavated soils to a distance exc. 250m but n.exc 500m and depositing where directed at a level n. exc. 1.5 M above the starting point complete all as specified and directed.

M&L for hardcore broken stone or boulders hardcore of gauge exc 63mm but n.exc 100mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rolled /rammed to a true surface, complete all as specified and as directed.

M&L for moorum filling/red bajri filling in floor or paving laid in laying n exc 15 cm thick spread levelled and rammed including watering complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above ground level, complete all as specified and directed.

Materials and Labour for plain cement concrete (1:4:8) type D-2 using 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed.

Materials and Labour for 75 mm thick plain cement concrete (1:3:6) type C2 (using 40 mm graded stone aggregates) as in plinth protection, including finishing surface even and smooth without using extra cement, complete all as specified and directed.

Materials and Labour for 100 mm thick plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in sub base in floor/paving/ hardstanding, complete all as specified and directed.

Materials and Labour for 75 mm thick plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in sub base in floor/paving/hardstanding ,complete all as specified and directed.

M & L for 40mm thick cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in floor ,sub floors ,finishing smooth & even without using extra cement , complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L for fly ash brick straight or curved on plan exc 6 mtr mean redious built in cement mortar (1:6 ) complete all as specified and directed.

M & L for brick work using old size bricks (EXCEPT BRICKS) straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar (1:6) ,complete all as specified and directed.

M&L for brickwork with fly ash bricks in one brick thick honey-comb walling, built in cement mortar (1:6), complete all as specified and directed.

M&L for fly ash bricks straight or curved on plan to any radius in half bricks thick walls, built in cement mortar (1:6) complete all as specified and directed.

M & L for rendering 15mm thick plaster in cement mortar(1:4) on fair faces of concrete or brick work external in two layers (10mm thick 1st layer + 5mm thick finishing layer) mixed with water proofing compound as per manufacturer’s instructions on top layer finish even & smooth without using extra cementr complete all as specified and directed. Note: WPC will be measured and paid separately under relevant item.

Materials and Labour for rendering 15 mm thick, cement plaster, in cement mortar (1:6) on fair face of brickwork in walls and finishing surface even and smooth without using extra cement, complete all as specified and directed.

Materials and Labour for rendering 5 mm thick cement plaster in cement mortar (1:3) on ceiling surfaces and finish the surface fair and even and smooth without using extra cement, complete all as specified and directed.

Supply only liquid water proofing compound, complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying three coats white wash complete all as specified and directed.

M&L for preparation new plastered surfaces and applying three coats of white washing on ceiling complete all as specified and directed.

M&L for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance and including a coat of white wall care putty complete all as specified and as directed.

Demolition of reinforced cement concrete as in cover slabs of manhole or septic tank, soak pit and walls, basement walls and in foundation ,complete all as specified and directed .

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (using 20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1 (1:2:4) (using 20mm graded stone aggregate) in columns, pillars, piers, etc complete all as specified and directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (using 20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and directed.

Use and waste of formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for rough finished surface, not exceeding 200m thick (Horizontal or sloping), complete all as specified and directed.

Use and waste for formwork to sides and soffits of floor or roof beams, beam haunchings, girder,bressummers, lintels, cantilevers, shelves including supports, overhangs etc, complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide fair finishes surfaces complete all as specified and directed.

Supply and fix mild steel TMT bars 10 mm dia. and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips , complete all as specified and directed

Supply and fix mild steel TMT bars 6 to 8mm dia, cut to length bent to shape required including cranking, bending spirally for hoping for columns, hocking, ends and binding with and incl MS wire (appealed) not less than 0.9 mm dia, complete all as specified and directed.

M&L for providing RCC precast cement concrete type B-0 (1:2:4) (using 12.5mm graded stone aggregate) as in cover slab for man hole and similar article with plain face set in cement mortar (1:4) complete all as specified and directed.

M&L for loose filling with brocken bricks aggregates of gauge 80 to 150 mm in soakage pits, soakage wells ,complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:4) inside and outside brick wall of manhole /septic tank /concrete surfaces even and smooth with out using extra cement, complete all as specified and directed.

M&L for plain cement concrete type B0,1:2:4 (using 12.5mm graded stone aggregate) as in benching, bed block, coping of manhole ,complete all as specified and directed.

S&F SFRC ( Steel Fibre Reinforced Concrete) Manhole Cover with frame,shape round/square,(40 to 50 kg approx) set at the top of the manhole at site complete as per manufacturer instruction and as directed by Engr-in-charge.

Demolition and breaking up of drain pipe (SGSW/PVC/RCC etc) set in cement mortar of internal dia of pipe 150 mm incl. concrete bed and removal of debris to low lying area of distance not exceeding 100m , complete all as specified and directed.

Demolition and breaking up of drain pipe (SGSW/PVC/RCC etc) set in cement mortar of internal dia of pipe 200 mm incl. concrete bed and removal of debris to low lying area of distance not exceeding 100m , complete all as specified and directed.

M&L for concrete bed for drain pipes in PCC (1:3:6) Type C2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid & tested for 150mm bore of pipe complete all as specified and directed.

M&L for concrete bed for drain pipes in PCC (1:3:6) Type C2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid & tested for 200mm bore of pipe complete all as specified and directed.

M&L for concrete bed for drain pipes in PCC (1:4:8) Type D2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid & tested for 150mm bore of pipe complete all as specified and directed.

Supplying and laying of Supreme Eco drain Hi-tech pipe dranage sewer system pipe bearing 160 mm dia minimum 4mm thick including jointing with couplar ,bend tee as per site requerement complete laid in trenches or floors, complete all as specified and directed. (Note:-Necessary PCC haunching/benching/ packing shall be measured and paid seprately.)

M&L reinforced concrete drain pipes, class NP2, 150mm internal dia laid in trenches on concrete bed and jointed complete all as specified and directed. Note:- Excavation earth work concrete bed and haunching shall be measured and paid separately.

M&L reinforced concrete drain pipes, class NP2, 200mm internal dia laid in trenches on concrete bed and jointed complete all as specified and directed. Note:- Excavation earth work concrete bed and haunching shall be measured and paid separately.

Cleaning of existing manhole of any size of depth of manhole exc 3.00 but not exc 4.50 m by bailing out water/sewage by mechnical pump including mouth of sewage line and removing the deposited residual sludge/debries to a distance not exc. 50 mtr and buried in the ground, complete all as specified and directed.

M&L for cleaning of septic tank/soakage pit of any size, type and any depth and removing the sludge/solid content from the septic tank/soakage pit by using honey sucker mechanical method including flushing with fresh water and make the septic tank/soakage pit fully functional to the entire satisfaction of Engineer-in-Charge also to remove the sludge/solid contents out of defence land including covering with a layer of earth and respositioning of the RCC/CI cover slab, complete all as specified and directed. Note :- Net measurements for sludge only be paid. Rate is inclusive of dewatering.

Taking down rain water pipe of any size including all fittings and removal off the site complete all as specified and directed.

S&F for PVC (SWR) pipes of 110 mm dia single socketed in any length with rubber ring joints fixed to walls, including with clamps etc, complete and jointed complete all as specified and directed.

M&L for non-skid ceramic, straight cut/joint free, 7 to 8 mm thick colored tiles, area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, in floors etc. over and including 15 mm thick cement mortar (1:6) screed, set and jointed with grey cement slurry & pointed with grout of matching shade, , complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE.

M&L for glazed cermic tiles 300x200x7 mm thick in vertical surfaces such as skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M & L for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thick M-35 grade with grey cement and pigment complete all as specified and directed. Note: Design, shade and pattern of fixing of paver block shall be as directed and approved by GE.

M & L for pre-cast cement concrete solid block kerb stone exc 10cm in width ,pcc 1:3:6 type C-1(using 20mm grades s set in cement mortar (1:6) of any shape and size as approved by GE ,incl.necessary excavation and earth work ,returning filling and removal of surplus soil from site ,kerb stone shall be fixed in true line and level or in curves for edging of road side path including embedding pcc pre-cast blocks in ground to any depths as required and tamping soil around pcc blocks , complete all as specified and directed.

M&L for 100mm sand cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

M&L for 75mm sand cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F CI bends 100mm dia , diminishing pieces or tapers (larger bore measured) , complete all as specified and directed.

S&F CI bends 75mm dia , diminishing pieces or tapers (larger bore measured) , complete all as specified and directed.

S&F cast iron cowls for 75mm pipe ,complete all as specified and directed.

Supply and laying of 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings in trenches complete all as specified and as directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm , complete all as specified and as directed.

Supply and Fix cast iron floor trap 75 mm dia with grating including jointing to waste pipe in run lead complete and making good the disturbed surface to match the existing surface,complete all as specified and directed.

Supply and Fix vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440mm, white, with integral foot rests and with ‘P’ or ‘S” trap, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including provision of lime concrete bedding and make good the disturbed surface, complete all as specified and directed.

S&F 15mm brass chromium plated shower rose with without swivel joints, 125mm size including fixing to steel pipe or union,complete all as specified and directed.

Supply and Fix PVC valve less, syphonic action type, 10 Litres capacity flushing cistern, low level, white, with inlet, ball valve, float and handle, including brackets, flush pipe, complete all as specified and directed.

S&F 125mm dia grating doom with wsate hole of PTMT (Minimum weight 40gms) fixed in cement mortar (1:3), complete all as specified and as directed.

Supply flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern ,complete all as specified and directed.

Supply and Fix stop/angle valves cast copper alloy, fancy type, chromium plated,screwed down, high pressure with crutch or butterfly handle, screwed both ends for steel pipe of for unions, 15 mm bore, complete all as specified and directed.

S&F 15 mm bore pillar taps, cast copper alloy, withcapstan heads,chromium plated (fancy type) ,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed,fancy type suitable for 15 mm bore pipe, complete all as specified and as directed.

S&F 15 mm bib tap, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs wash basins, vitreous china, white, flat back, size 550 mm X 400 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm single side prelam PVC sheet with edges painted to match with prelam sheet, reinforced with MS square tube, fixed in opening, complete all as specified and directed.

Supply and fix factory made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

Supply and fix steel ventilator with top hung shutter (minimum wt. of steel section should be 1.42 kg/M) including box type hinges, steel peg stay, complete with glazing bars, dovetailed or welded, including taking down existing unserviceable one including making good disturbed surfaces as per existing specfication complete all as specified and directed.

Materials and Labour for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Grade E-165 complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel and iron surface not exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.

S&F aluminium, anodized barrel tower bolts of extruded section and fixed, 150 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified.

S&F aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified.

S&F stainless steel butt hinges, medium weight, and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified.

S&F Aluminium alloy , anodised sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet cast of extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of size 250 mm long and dia of rod not less than 16 mm,ISI marked complete all as specified and directed.

Supply and fix 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed.

Supply and fix stainless steel wire cloth, 0.36mm nominal dia. of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Material and labour for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

Supply and fix switch piano flush type, single pole , 6 Amps, one way complete all as specified.

Supply and fix ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

Supply & fix lamp holder, PVC/polycarbonate type with back plate straight or anfular suitable for batten fittings, complete all as specified.and directed.

Supply & fixing metallic exhaust ventilation fan of sweep 300 mm sweep, 240volt AC complete with louver and all asssesories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing connected with rwin core twisted flexible copper conductor (23/0.0076) of size complete all as specified and directed. Note:- Cost of cutting and making hole for fixing exhaust fan shall be deemed to included in quoated rates.

Supply and fix 20 W ultra slim tube light fittings and fixture with extruded polycarbonate complete with all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete complete all as specified and directed.

Supply and fix led bulb 7 watt , 240 volts , complete all as specified and directed.

Supply and fix 9 W led mirror light fitting wall mounted batten 2ft , extruded polycarbonate, environmental friendly , heat sink provided for efficent heat dissipation and integrated electronic driver for 9 watt , 6000k ,including complete with all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete complete all as specified and directed.

Supply and fixing Bldg security light fittings 25 watts, minimumm system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified.and directed.

Supply and fix epoxy powder coated sheet metal enclosure for DBs, double door, single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact, complete all as specified and directed.

Supply and fix MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. Note :-Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating.

Supply and fix MCB SPN 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. Note :-Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating.

Supply, laying / fixing / connecting, testing and commissioning of LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts cross sectional area 16Sqmm x 2 core in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) , complete all as specified and as directed Note : (i) Earth work in excavation, sand cushioning, cable cover, cable protection, GI pipe shall be measured and paid separately under relevant item. (ii) Cable Route Indicator made of metal of height 300mm above GL duly written ''LT CABLE'' to be fixed on every 30 mtr distance with pcc (1:3:6), 150 mm below the GL ,cost of indicator and pcc to be considered in this item rate.

Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and directed. (Note : Punned thickness shall be measured). Note :- Punned thickness 18 cm shall only be considered for payment.

Supply and lay in trenches fly ash bricks, for cable protection complete all as specified and directed.

Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate 3 of SSR Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.

M&L for 25 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection i including fitting like socket /Union/Tee/Reducer Nipple etc complete required will be supplied by Contractor, rate for the same is included in the item rate quoted ,complete all as specified and directed.

M&L for 40 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection i including fitting like socket /Union/Tee/Reducer Nipple etc complete required will be supplied by Contractor, rate for the same is included in the item rate quoted ,complete all as specified and directed.

M&L for 25 mm bore gunmetal globe or gate valves , yoke type , full opening with iron wheel head ,screwed both ends heavey duty, cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as specified and directed.

Supply & fixing 500 litres capacity rotational moulded polyethylene water storage tanks multi layer (cylindrical vertical with closed top with tripal layer) conforming to IS-12701-96 complete including provision of all inlet, outlet, overflow and drain pipe fittings complete all as specified and directed.

M&L for 25 mm bore ball brass valves high pressure with polyethylene float and fly nut complete , screwed for iron pipe or brass ferrule , complete all as specified and directed.

BABY ENGINEERING ELECTRICAL MECHANICAL STORES

M/S BHATTACHARJEE ENTERPRISE

M/S Ali Trading Co

ANIMA ENTERPRISE