Malikpur CW

Amount

Distribution System

Providing, Stringing out PVC pipes as per ISI-4985 (ISI marked with prior approval of Engineer in charge) casting along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing, including excavation & specials complete as per specifications for less than 3 mtr street width. Complete in all respect (MANUAL)

PVC pipe 63mm o/d

PVC pipe 90mm o/d

Providing, Stringing out PVC pipes as per ISI-4985 (ISI marked with prior approval of Engineer in charge )casting along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing, including excavation & specials complete as per specifications for for more than 3 mtr street width Complete in all respects (Mechanical Means)

PVC pipe 63mm o/d

PVC pipe 90mm o/d

Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Pipe (S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage, cost of rubber ring.

D.I. Pipe as per IS 8329 DI-K9

D.I pipe 150mm i/d

Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects.

D.I. specials upto 300mm i/d

Dismantling of mettalic road with bitumainous course 50mm to 75 mm thick CC 1:8:16 and making good the same to its original condition. Complete in all respect as per instructions / directions issued by EIC ( only 25% of total metalled portion presumed to be taken in the estimate)

PVC pipe 63mm o/d

PVC pipe 90 mm o/d

DI pipe 150 mm I/d

Dismantling of cement concrete 80mm thick cement concrete 1:2:4 over 100mm thick C.C. 1:8:16 and making good the same to its original condition complete in all respects

PVC pipe 63mm o/d

Taking out existing CC interlocking paver blocks from footpath/ central verge/pavement, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in- Charge and refixing of Interlocking Tile 80 mm thick factory made cement concrete interlocking Paving blocks of M- 40 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. Complete as per directions of engineer-in- Charge. ( refer. Anaylsis)

PVC pipe 63mm o/d

PVC pipe 90mm o/d

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge)

Providing, Fixing & jointing Cast Iron Surface box for Sluice Valve, Air Valve, Fire hydrant etc. including all carriages complete 8No. with Each 3kg I.e (8 x 3 =24 kg)

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department With each

Size 0.6m x 0.6m

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department. Complete job Size 0.9m x 0.9m

Making Connection with existing pipe line with proposed upvc pipe line.Complete job with clamps, sockets etc.

Rising Main

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications including excavation.

110mm o/d pipe of 10kg/sqcm

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge)

Providing, Fixing & jointing Cast Iron Surface box for Sluice Valve, Air Valve, Fire hydrant etc. including all carriages complete @ 3Kg each

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department (size 0.9m x 0.9m)

Repair of OHSR

Replastering inside the OHSR container inlcluding cement rendering, fixing wire mesh jalli, water proofing compound etc.Complete job

12.5 mm thick cement plaster 1:3 including Cement rendering on plaster 1mm thick. Complete job

Providing and fixing Chicken wire mesh inside the container.Comlete job.

Extra for providing and mixing water proofing material (Liquid or powder) in cement plaster work as per manufacturer guideline and to the entire satisfaction of Engineer-in-charge.

Extra for scaffolding around OHSR Height

Repair of expansion joint complete job 100 mm i/d

House hold connections

Providing household connection, laying, jointing, fixing, testing MDPE pipe (as approved by Engineer in charge), including cost of excavation, refilling, the trench, CI bib cock as per IS : 210 with stainless steel spindle, 15 mm o/d MDPE pipe 2.50 meter (length on average basis) 15mm o/d GI pipe 2.00 mtr, 3” i/d uPVC clamp, GM ferrule ISI marked, connection of 15 mm i/d ferrule medium, specials such as tees, bends, sockets, elbows, nipples (100mm & 150 mm), union couplings, GI hooks etc. and gun metal peet valve (heavy pattern) with hand wheels on MDPE/GI pipe line laid in the ground or inside the buildings, cutting, threading, making holes in wall and testing in trenches in the ground. All material should be approved make (to be approved of Engineer in charge). Complete job in all respect including cost of carriage.

Providing and fixing water meter on house connections

Providing New house connections

Providing house connections on replaced pipe line

Provision of washer in existing and proposed water connections as per standard design.

Prov. Installing, testing & commissioning one No. Electronically actuated, Diaphragm Operated, Metering System, Chemical Dosing Chlorinator ,suitable for delivering 0.5 to 6 Litres of Bleaching Powder Solution/Sodium Hypo solution per hour under maximum delivery pressure up to 7 Kg.cm2, and suction lift not less than 1.5 m, as per DWSS. standard specifications.

Repair of Pump Chamber

Minor repair of existing Pump Chamber having replacement of broken doors , windows, glass panes, electrical works , paint and polish works etc as per following details :-

Applying Pink Primer or-aluminium priming coat including preparation of surface With special quality paint

Painting two coats excluding priming coat with ready mixed paint in all shades on new wood work With special quality paint

Finishing wall with exterior decorative cement based paint such as snowcem robbiacem etc. on new work in two coats to give even shade. Complete job to the entire satisfaction of Executive Engineer

Provision of new door for pump chamber made out of Hollock wood against damaged door of pump chamber including Hinges, Screws, Chocks Cleats, Stops and Cords etc. complete fixed in position (double Leaf) @ Paneled glazed or glazed and paneled. 40 mm thick

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of Paris and chalk mitti including finishing the surface to the required finish Inside pump Chamber. Complete job to the entire satisfaction of Executive Engineer

Distempering with dry distemper of approved manufacture two coats over one priming coat to give an even shade. Complete job to the entire satisfaction of Executive Engineer

Supplying & fixing glass panes 4mm thick including special metal sash putty of approved make.

Provision for 1 no IHHL toilet along with pump chamber as per standard design and drawing. Complete job to the entire satisfaction of Executive Engineer

Pumping Machinery

Providing, installing, testing and commissioning of 1 no. 17.50 BHP Electrically driven pumping set of reputed make , capable of deleviring 329 lpm against a head of 114 mt Complete in all respects

Supplying lowering of 100 mm dia GI pipe as per IS 1239 including sockets . Complete in all respects

Providing and fixing of submerssible of 4 mm ² core cable , complete in all respect

Providing installing, testing and commissioning of 1 no. control panel with closed transition star delta with enclosure consisting of electrical appliances such as contactor, furses, MCCB's over load relays , isolator switches wiring and connnections. Complete in all respect .

Provision for automated Water Controller

Providing and installing 100mm dia delivery main (From Tube well to Duck Foot bend including cost of C.I/D.F Pipes, D/F Sluice valves, D/F NRV & Specials as C.I Bends, Tail Piece Tees etc.. inside the pump chamber as per standard design complete in all respects

Construction of V- Notch Houdi (Size 1.80 x 0.90 m) including cost of v – notch as per standard design & drawings of Public health Department

Credit for old Pumping Machinery

Credit for old column pipe

Credit for old existing submerssible cable

Credit for old SV, &DF pipe etc

Development works at water works

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects.

Extra for Carriage of Fine & Course aggregate i.e. Sand & Bajri from query to water works site beyond 5 km (Qty as worked out for the components to be constructed.

Providing & fixing angle iron pickets with angle 40mm x40mm x 6mm including cost of concrete block & painting complete in all respects.

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm .

Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing D-3.

Repair of brick masonry corner pillar

Repair of masonry gate pillar & MS Steel Gate size 1.22mtr x 1.37 mtr complete in all respects

Construction of Cement Concrete, Foot Path with masonry toe wall & earth filling inside water works .

Painting of MS Sign Board .

Repair of toe wall around the water works site (0.45 mtr depth)

Enviornmental details

Turfing of lawns with fine grass including ploughing dressing including/breaking of clods, removal of rubbish, dressing and supplying of doob grass roots at 10 cm, apart including supplying & spreadingof manure @ 0.60 cum per 100 sqm. ( 1 no water work sites)

Planting permanent hedges including digging of trenches 60 cm. wide and 30cm. Deep, refiling the excavated earth mixed with manure supplied @ 4.65 cum per 100m & supplying & Planting hedge Plants at 30cm. Apart.

Supplying and planting permanent trees including digging of earth pits size 75 cmx75cmx75cm deep, refilling the excavated earth with manure supplied @ 0.113 cum each and watering supplying through tractor tanker.

Planting permanent shrubs inclding digging of pits on earth size 0.60mx0.60m deep, refilling the excavated earth mixed with manure supplied @ 0.056 cum each and watering supply through the tractor tanker.

Extra for Carriage of Fine & Course aggregate i.e. Sand & Bajri from query to water works site beyond 5 km (Qty as worked out for the components to be constructed. (45-5=40 km.) (470.79-182.40)

Sand & BAJRI