ADDN ALTN CUM SPECIAL REPAIR OF CERTAIN OFFRS JCOs AND ORS AND DEFENCE CIVILIAN MD ACCN AT LUCKNOW STATION UNDER GE EAST AND GE WEST LUCKNOW

Amount

M&L for Brick work with fly ash brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and as directed. (a) 61.10 Cum for GE(East) Area (b) 115.00 Cum for GE(West) Area

Description all as per item No 01 here-in-before but except bricks (bricks recovered from demolition to be used) complete all as specified and directed. (a) 40 Cum for GE(East) Area (b) Nil Cum for GE(West) Area

M & L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius complete all as specified and directed. (a) 629.00 Sqm for GE(East) Area (b) 43 Sqm for GE(West) Area

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc. by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc. by skilled labour complete all as specified and directed. (a) 7260 Sqm for GE(East) Area (b) 16500 Sqm for GE(West) Area

Material & labour for preparation of old plastered/new surfaces of finished walls and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. Note- Primer and emulsion to be carried out through air less spray machine with Mechanical means The work for periodical services shall include the following and the rates quoted by the bidder shall include the same. (aa) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorized applicator through manufacturer of the materials like Exterior emulsion paint, putty etc. after approval by the GE. (ab) The contractor shall upload with the documents under cover-I "Memorandum of Understanding"(MoU)with at least one of the manufacturers mentioned in the contract, failing which the bid shall be liable to be rejected. (a) 14845 Sqm for GE(East) Area (b) 13950 Sqm for GE(West) Area

M & L for preparation of new/old plastered surfaces of wall and applying two coat Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified & directed. (a) 19860.00 Sqm for GE(East) Area (b) 21000 Sqm for GE(West) Area

M&L for new plastered on ceiling surface and applying three coat of white wash complete all as specified and directed. (a)2000 Sqm for GE(East) Area (b) 2500 Sqm for GE(West) Area

M & L for complete removal of existing treatment on ceiling surface and preparation of old plastered ceiling surface and applying two coats of white wash complete all as specified and directed. (a) 3500 Sqm for GE(East) Area (b) 4000 Sqm for GE(West) Area

M&L for new plastered surface on wall and applying three coat of white wash complete all as specified and directed. (a) NIl Sqm for GE(East) Area (b) 300 Sqm for GE(West) Area

M&L for rendering/plaster by using ready-mix mixture of thickness 12 mm to 15 mm on newly prepared surface and plastering the wall surface with white cement based polymer modified self curing mortar, complete all as specified and directed. (a) 2075 Sqm for GE(East) Area (b) 650 Sqm for GE(West) Area

Repair to plaster by using ready-mix mixture of thickness 12 mm to 15 mm and taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, complete all as specified and directed. (a) 17000 Sqm for GE(East) Area (b) 17300 Sqm for GE(West) Area

Repair to plaster by using readymix mixture of thickness 5 mm to 7 mm in ceiling including taking down cement or cement lime plaster, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, complete all as specified and directed. (a) 2000 Sqm for GE(East) Area (b) 2500 Sqm for GE(West) Area

Demolition of sunken slab floor or WC and Bath including WC trap etc. including taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab in following . (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with WP chemical Cement + of Nerolac Perma/STP/Asian Confirm to IS 2645 - 9103 as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface imperfections. (c) Fixing 40mm dia PVC Pipe 450mm long bottom of the sunken and wrapping of bath seal tape on the pipes inserted through walls to floor are and seal it (Perma Butyl tape product of Nerolac Perma/ STP/Asian and grouting around the inserted pipes by porable grout as directed by Engr-in-Charge. (d) Make angle fillets by mixing sand cement and Nerolac Perma Hypercrete/STP/Asian on all corners. (e) Brushing two coats with high performance cementitious elastomeric two components water proofing coating of Nerolac Perma Super 2K/STP/Asian of thickness 1mm in two coats, Above treatment shall be giving upto height 15cm from bottom slab and allow it dry completely. Above material shall be confirm to below properties- 1. Bulk Density - 1.73g/cc, 2. Elongation - 100% as per ASTM D412 (Min) 3.Hydrostatic Pressure - 4bars as per ASTM D 7088, 4. Adhesion to concrete- Greater than 1.5N/mm2, 5. Crack Bridging ability as per AS/NZS 4548.5 Min 1mm. 6. DFT - 1mm in two coats. Seperation Layer- Providing & Laying 120 gsm non woven geo textile membrane over waterproofing coating to protect the coating prior the screed. (f) Providing PCC 1:2:4 type B-1 using 20mm graded stone aggregate mixed with intergral waterproofing compound Cement + of Nerolac Perma as per manufacturer instructions in sunken slab for making slope to wrap hole. (g) Fill the sanitary gaps with Nerolac PermaSIKA/Asian sealing compounds complete. (a) 386 Sqm for GE(East) Area (b) 600 Sqm for GE(West) Area

M&L for PCC 1:7:12 type F-2 using 40mm graded crushed stone aggregate in sunken slab complete all as specified and directed . (a) 138.60 Cum for GE(East) Area (b) 202 Cum for GE(West) Area

Dismantling brick tiles or terracing tiles, single layer of roofs including mud pushaka etc roughening surfaces of old concrete by picking, sweeping/Brushing clean and washing down with water to remove dust and apply neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed. (a) 2325 Sqm for GE(East) Area (b) 6000 Sqm for GE(West) Area

M&L PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof kerbs /padding /benching or mud stops, and platform for mounting service tanks, rounded, chamfered on edges including necessary use and waste of from work etc complete all as specified and directed. (a) 185 Cum for GE(East) Area (b) 225 Cum for GE(West) Area

M&L for screed bed 10mm thick in CM 1:3 on concrete surfaces/ roof/ parapet wall using WPC as per manufacturer instruction finished fair & even without using extra cement complete all as specified and directed. (a) 4735 Sqm for GE(East) Area (b) 4650 Sqm for GE(West) Area

Taking down chowkhat frame with shutter (without taking out shutter from the frame) n exc 1.50 Sqm and removing from sites complete all as specified and directed. (a) 732 Nos for GE(East) Area (b) 1080 Nos for GE(West) Area

Taking down chawkhat frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm but n. exc 4 sqm each and removing from site complete all as specified and directed. (a) 836 Nos for GE(East) Area (b) 1300 Nos for GE(West) Area

Taking down shutter of any description exceeding 2.00 Sqm each and re-fixing in the same opening after repair complete all as specified and directed. (a) 38 Nos for GE(East) Area (b) 30 Nos for GE(West) Area

Taking down shutter of any description exceeding 1.00 Sqm each and not exceeding 2.00 sqm each and re-fixing in the same opening after repair complete all as specified and directed. (a) Nil Nos for GE(East) Area (b) 30 Nos for GE(West) Area

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm uprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge, complete all as specified and directed. Note :-For WPC frames, minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension on plus side shall be accepted but no extra payment on this account shall be made. The work for WPC frames shall include the following and the rates quoted by the bidder shall include the same- (aa) The work pertaining to WPC frames shall be executed by the contractor as per MoU from author-ised applicator through manufacturer of the materials like WPC board, SS screws etc after approval by the GE. (ab) The contractor shall upload with the documents under cover-I "Memorandum of Understand-ing"(MoU)with at least one of the manufacturers mentioned in the contract, failing which the bid shall be liable to be rejected. (a) 1570 RM for GE(East) Area (b) 1500 RM for GE(West) Area

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm uprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge, complete all as specified and directed. Note:-For WPC frames, minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension on plus side shall be accepted but no extra payment on this account shall be made. The work for WPC frames shall include the following and the rates quoted by the bidder shall include the same- (aa) The work pertaining to WPC frames shall be executed by the contractor as per MoU from author-ised applicator through manufacturer of the materials like WPC board, SS screws etc after approval by the GE. (ab) The contractor shall upload with the documents under cover-I "Memorandum of Understand-ing"(MoU)with at least one of the manufacturers mentioned in the contract, failing which the bid shall be liable to be rejected. (a) 149 RM for GE(East) Area (b) NIL for GE(West) Area

M&L for factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw with-drawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modu-lus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of be-ing termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, and 4 no. stainless steel butt hinges all as per direction of Engineer-In- Charge. Note:- The work for WPC frames shall include the following and the rates quoted by the bidder shall include the same- (aa) The work pertaining to WPC frames shall be executed by the contractor as per MoU from author-ised applicator through manufacturer of the materials like WPC board, SS screws etc after approval by the GE. (ab) The contractor shall upload with the documents under cover-I "Memorandum of Understand-ing"(MoU)with at least one of the manufacturers mentioned in the contract, failing which the bid shall be liable to be rejected. (a) 671 Sqm for GE(East) Area (b) 604 Sqm for GE(West) Area

Supply and fixing 30 mm thick factory made wire mesh solid WPC prelim door shutter with lamination consisting of Density 650 Kg/Cum manufactured by an ISO -9001-2015 certified company, door to be paneled with SS mosquito mesh and XPM aluminium mesh for additional strength and safety purpose (confirming as per IS:4020). The door should be water proof termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. MS powder coated butt hinges size 100mm x25mmx2 mm and 32 mm long steel screws drilled suitable to pass through both the walls of the MS tube. Other hardware’s should be fixed with 19x6mm size stainless steel screw and 2 mm thick edge moulding tape or 90 degree edge bend finish etc complete as per direction of Engineer-In- Charge, manufacturers specification & drawings complete all as specified & directed . Note:-The work for WPC shutter shall include the following and the rates quoted by the bidder shall include the same- (aa) The work pertaining to WPC shutter shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like WPC shutter, SS screws etc after approval by the GE. (ab) The contractor shall upload with the documents under cover-I "Memorandum of Understand-ing"(MoU)with at least one of the manufacturers mentioned in the contract, failing which the bid shall be liable to be rejected. (a) 35 Sqm for GE(East) Area (b) NIL Sqm for GE(West) Area

S&F powder coating anodized aluminium glazed ventilator ,Half fixed type and half fixed glass louevers with aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, including dismantling complete all as specified. (a) 250 Sqm for GE(East) Area (b) 160 Sqm for GE(West) Area

S&F pressed steel frame for door with one or more rebate size 105X60mm including necessary fixing lugs, lock striking plates, hinges, hold fast etc including filling cement concrete1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) filling and compaction in frame complete all as specified & directed by Engr-in-Charge. (a) 2109.20 RM for GE(East) Area (b) 2200 RM for GE(West) Area

S&F pressed steel frame for door with one or more rebates size 125x60mm including necessary fixing lugs, lock striking plates, hinges, hold fast etc. including filling cement concrete1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) filling and compaction in framecomplete all as specified and directed. (a) 1744.80 RM for GE(East) Area (b) 1700 RM for GE(West) Area

S&F 0.9 mm thick surface finishes with designer decorative laminates type 1 with colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all specified and directed by Engr-in-Charge. (a) 2730 Sqm for GE(East) Area (b) 3400 Sqm for GE(West) Area

S&F for 35 mm thick factory made flush shutters, solid core construction, with block board core & plywood face panels, commercial type exterior grade incl laminated at both sides with 5mm thick wooden beading all around the door, complete all as specfied and directed . (a) 1365 Sqm for GE(East) Area (b) 1700 Sqm for GE(West) Area

S & F for 35mm thick factory made glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (b) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed. (a) 701.65 Sqmfor GE(East) Area (b) 700 Sqm for GE(West) Area

S&F SS 304 grade profile T beading 1 mm thick colour golden/metallic fixed on flush door shutter including necessary fixing arrangement complete all as specified and directed. (a) 940 RM for GE(East) Area (b) NIL for GE(West) Area

S&F in repair 'E' board everest make 600x600x4mm thick white prelaminated sett embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be power coated white. The frame work shall comprise of main runner made from 0.33 mm thick GS sheet and of size 24x32x300mm and spaced at 1200mm centers securely fixed to be structural soffts by approved hangers at 1200 mm maximum centrers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug level and justers and screws etc. The last hanger at the end of each main runner shall not be grater than 450mm from adjacent wall, Flush fitting of 1200mm long cross tee (with double stiching) to be interlocked between main runners at 600mm center to from 1200x600mm modules cross tee longer than 600mm to be supported independtly. 600x600mm dodules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee, perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction. (a) 100 Sqm for GE(East) Area (b) NIl for GE(West) Area

Dismantling iron mild steel work of any description not otherwise provided for etc. complete all as specified & directed. (a) 5.25 Qtl for GE(East) Area (b) Nil for GE(West) Area

M&L for 4 mm thick plain sheet glass ordinary quality in repair including glazing with putty area n.exc 0.5 sqm in each pane complete all as specified and directed. (a) 50 Sqm for GE(East) Area (b) Nil for GE(West) Area

S&F in repair Mat finish double bowl sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink .(Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed. (a) 8 Nos for GE(East) Area (b) Nil Nos for GE(West) Area

S&F in repair Mat finish sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink .(Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed. (a) 134 Nos for GE(East) Area (b) 178 for GE(West) Area

Disconnecting existing tanks of capacity 500 litre to 1000 litre from water supply connections, setting aside (or lowering if required) for repairs, cleaning, etc. and re-hoisting if required reconnecting and re-fixing in position etc, complete all as specified and directed. (a) 13 Nos for GE(East) Area (b) Nil for GE(West) Area

M&L for Framed work such as grills, gratings, etc.. with ends of bars, shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. (a) 6050 Kg for GE(East) Area (b) 5200 Kg for GE(West) Area

M&L for welded steel wire fabric supplied and fixed complete to wood or steel member not exceeding 4 kg as specified and directed. complete all as specified and directed. (a) Nil Kg for GE(East) Area (b) 3200 Kg for GE(West) Area

M&L for providing, cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. (a) 10 Cum for GE(East) Area (b) 8 Cum for GE(West) Area

S&F in repair 25mm dia stainless steel curtain rod, superior quality (weight not less than 300 g/RM) with end brackets and end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and directed. (a) 1690 RM for GE(East) Area (b) 2050 RM for GE(West) Area

S & F stainless steel Kitchen plate rack of overall minimum size 750 mm x 900 mm and 250 mm deep, with parti-tions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete all as specified and directed. (a) 08 Nos for GE(East) Area (b) NIL Nos for GE(West) Area

S & F stainless steel Kitchen plate rack of overall minimum size 750 mm x 600 mm and 250 mm deep, with parti-tions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete all as specified and directed. (a) 142 Nos for GE(East) Area (b) 178 Nos for GE(West) Area

S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed. (a) 513 Nos for GE(East) Area (b) 712 Nos for GE(West) Area

S&F in repair vitreous china Wash hand basin with pedestal white, flat back type of size 550x400mm including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10X7.5X15cm, 32mm dia PVC waste pipe and 32mm bore chromium plated brass waste coupling with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.(excluding tap, waste chain & plug) complete all as specified and directed. (a) 142 Nos for GE(East) Area (b) 178 Nos for GE(West) Area

S&F for Vitreous china (Counter type) WHB White of size 445x445x130 mm with waste coupling waste pipe of 32mm dia complete all as specified and directed. (a) 16 Nos for GE(East) Area (b) Nil Nos for GE(West) Area

S&F in repair Vitreous China squatting pan, 'Orissa pattern', size 580x440mm, white, with integral foot rests including PVC 'P' or 'S' trap, excluding flushing cistern and flush pipe, including connection to trap and flushing pipe etc. and making good to floor complete all as specified and directed. (a) 120 Nos for GE(East) Area (b) 178 Nos for GE(West) Area

S&F in repair coupled Vitreous China WC (ET) wall/floor mounted with dual flushing cistern including all necessary fitting such as flush pipe waste pipe fixed as in repair of approved shade and make complete all as specified and directed. (a) 16 Nos for GE(East) Area (b) NIl Nos for GE(West) Area

S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white including fixing bolts, seat cover and flush pipe 'P' and 'S' trap, including connection to trap and flushing pipe , antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor complete all as specified and directed. (a) 22 Nos for GE(East) Area (b) Nil Nos for GE(West) Area

M&F for vitrified Ceramic tiles dark shade 8-9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm , in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete as specified and directed by Engr-in-Charge. (a) 4746 Sqm for GE(East) Area (b) NIl for GE(West) Area

M&F for vitrified Ceramic tiles dark shade 8 to 9 mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 as specified and directed by Engr-in-Charge. (a) 780 Sqm for GE(East) Area (b) 6410 Sqm for GE(West) Area

M&L for premium quality joint free non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and dismantling of existing tiles complete all as specified and directed. (a) 1450 Sqm for GE(East) Area (b) NIl for GE(West) Area

M&L for premium quality joint free non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and dismantling of existing tiles complete all as specified and directed. (a) Nil Sqm for GE(East) Area (b) 1250 Sqm for GE(West) Area

M&L for joint free glazed coloured GLOSSY tiles, superior quality of size 300 x 450 x 7mm thick/300 x 600 x 7mm thick, in vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 and dismantling of existing tiles complete all as specified and directed. (a) 5780 Sqm for GE(East) Area (b) 4100 Sqm for GE(West) Area

M&L Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed in CM 1:4 including moulding (rounding edges), dismantling of existing stone slabs etc complete all as directed. (a) 446 Sqm for GE(East) Area (b) 350 Sqm for GE(West) Area

M&L for Marble Udaipur Green/Bhaisiana Zebra 18 to 20 mm thick (table rubbed and premirror polished) in single piece with grooves at the edges in steps (treads/risers) and like set and jointed in neat cement slurry including pointing in epoxy grout to match marble shade, laid over and including 15 mm thick screed bed in CM 1:4 including roughning of existing stone incl rounding edges and double grooves(in every step) complete all as specified and directed. (a) 1500 Sqm for GE(East) Area (b) 1300 Sqm for GE(West) Area

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed. (a) 2116.06 Sqm for GE(East) Area (b) 950 Sqm for GE(West) Area

S&F in repair two(double) legged floor door stopper of aluminum body & tougues with hard drawer steel spring fixed in floor of 140mm complete all as specified and directed. (a) 438 Nos for GE(East) Area (b) 712 Nos for GE(West) Area

S & F factory made WPC single extruded 100% lead free ISO certified board of 18mm thick both side pre laminated shutter for KITCHEN cupboard, Room Cupboard and bathroom cupboard. The laminated shutter should be .12-.14 micron pre laminated side with laminated color and other side same laminated color of density not less than 650 kg / cum manufactured by an ISO 9001:2015 certified company. All the edges shall be covered with 2 mm thick edge moulding tape or 90 degree edge bend finish. The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed. The work for WPC kitchen cabinets shall include the following and the rates quoted by the bidder shall include the same- (aa) The work pertaining to WPC cupboards shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like WPC board, SS screws etc after approval by the GE. (ab) The contractor shall upload with the documents under cover-I "Memorandum of Understanding"(MoU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be liable to be rejected. (a) 983.70 Sqm for GE(East) Area (b) 1200 Sqm for GE(West) Area

S & F 100 mm size , stainless steel matte finish Handle fixed with screws for kitchen cabinet & below platform complete all as specified and directed. (a) 2000 Nos for GE(East) Area (b) 890 Nos for GE(West) Area

S & F Stainless Steel handle matte finish fabricated type 150mm long complete all as specified and directed. (a) 1800 Nos for GE(East) Area (b) 1800 Nos for GE(West) Area

S & F Continuous (piano) hinges of size of flap 30mm mild steel, bright finish or elecrogalvanised fixed with screw to timber frame work complete all as specified and directed. (a) 1400 RM for GE(East) Area (b) 1600 RM for GE(West) Area

S & F 100mm size Stainless steel matte finish hasp and staple, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. (a) 463 Nos for GE(East) Area (b) 1200 Nos for GE(West) Area

S & F Magnet Ball catches with 8mm dia steel ball, and brass body and striking plate for cup board / cabinet shutters complete all as specified and directed (a) 2100 Nos for GE(East) Area (b) 2600 Nos for GE(West) Area

S & F 200mm long Stainless steel matte finish ,barrel tower bolts of extruded section complete all as specified and directed. (a) 1963 Nos for GE(East) Area (b) 1020 Nos for GE(West) Area

S&F 150 mm long Stainless steel matte finish ,barrel tower bolts of extruded section and fixed complete all as specified and directed. (a) 35 Nos for GE(East) Area (b) 1245 Nos for GE(West) Area

S & F Stainless steel Butt hinges "medium weight" steel 100mm size complete all as specified and directed. (a) 1015 Nos for GE(East) Area (b) 3402 Nos for GE(West) Area

S&F 250 mm Stainless steel ,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. (a) 642 Nos for GE(East) Area (b) 1200 Nos for GE(West) Area

S & F for mortise door lock with handle set 175 mm long 6 lever locking mechanism complete all as specified and directed. (a) 72 Nos for GE(East) Area (b) NIl for GE(West) Area

Drilling through holes in granite stone for inserting pipes etc not exc. 25 mm dia complete all as specified and directed. (a) 142 Nos for GE(East) Area (b) 178 for GE(West) Area

S & F in repair 10 ltrs capacity PVC valve less symphonic double action type flushing cistern, low level white with inlet ball valve, float and handle including brackets complete all as specified and directed. (a) 158 Nos for GE(East) Area (b) 178 Nos for GE(West) Area

S&F in repair chromium plated box type toilet paper holder fancy complete all as specified and directed. (a) 38 Nos for GE(East) Area (b) Nil Nos for GE(West) Area

S & F in repair for CP bib taps 15mm fancy type long body Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified. (a) 886 Nos for GE(East) Area (b) 1100 Nos for GE(West) Area

S & F in repairs 15mm bore, fancy type shower rose, 200x200 mm size chromium plated complete all as specified and directed. (a) 158 Nos for GE(East) Area (b) 178 Nos for GE(West) Area

S & F in repairs brass CP wall mixer for mixing hot & cold water with provision for over head shower with arm and long bend pipe and wall flanged screwed down for iron pipe of 15 mm bore size complete all as specified and directed. (a) 38 Nos for GE(East) Area (b) 178 Nos for GE(West) Area

S & F in repairs brass CP central hole Basin mixer fixed to pipe of 15 mm bore size complete all as specified and directed. (a) 38 Nos for GE(East) Area (b) NIl Nos for GE(West) Area

S & F in repairs brass CP kitchen sink mixer for mixing hot & cold water with provision for over head shower with arm and long bend pipe and wall flanged screwed down for iron pipe of 15 mm bore size complete all as specified and directed. (a) 30 Nos for GE(East) Area (b) Nil Nos for GE(West) Area

S&F in repair Pillar taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe including all accessories complete all as specified and directed. (a) 120 Nos for GE(East) Area (b) 178 Nos for GE(West) Area

S & F in repair half/quarter turn Angle valve cast copper alloy with capstan head chromium plated screwed down high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete as specified. (a) 684 Nos for GE(East) Area (b) 890 Nos for GE(West) Area

S & F in repair Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. (a) 189 Nos for GE(East) Area (b) 178 Nos for GE(West) Area

S & F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 15mm bore complete all as specified and directed. (a) 30 Nos for GE(East) Area (b) NIl Nos for GE(West) Area

S&F concealed stop cock cast copper alloy (ISI marked) fancy type, Cr plated with long shank and cup (concealed type) screwed down high pressure with Capstan head screwed both ends for iron pipe 15 mm bore dia complete all as specified and directed. (a) 213 Nos for GE(East) Area (b) NIl Nos for GE(West) Area

S&F in repair 32 mm dia of discharge pipe bottle trap of PTMT having minimum water seal of 25 mm .(Minimum weight 32 mm -260 gms/40 mm-270 gms) etc. all as specified and directed. (a) 22 Nos for GE(East) Area (b) Nil Nos for GE(West) Area

S&F long body 15mm bore two-way bib tap, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed. (a)22 Nos for GE(East) Area (b) Nil Nos for GE(West) Area

S & F in repairs Tubular Towel Rail 20mm dia. 'D' type, 600mm long of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats complete all as specified and directed. (a) 158 Nos for GE(East) Area (b) 178 Nos for GE(West) Area

S&F CP Towel ring 200mm dia superior quality fixed all as approved complete all as specified and directed. (a) 16 Nos for GE(East) Area (b) NIl Nos for GE(West) Area

S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 550 mm long complete all as specified and directed. (a) 150 Nos for GE(East) Area (b) 178 Nos for GE(West) Area

S & F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets complete all as specified and directed. (a) 150 Nos for GE(East) Area (b) 178 Nos for GE(West) Area

S & F in repair hand shower ( health faucet) with 1mtr flexible tube with wall hook bracket etc complete set of superior quality complete all as specified and directed. (a) 30 Nos for GE(East) Area (b) NIl Nos for GE(West) Area

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long ,including demolition of cement concrete (unreinforced) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified and directed. (a) 2395 Sqm for GE(East) Area (b) 1150 Sqm for GE(West) Area

M & L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base etc. including demolition of Cement concrete (unreinforced) in ground floor and paving n exc 15cm thickness and below or above ground level complete all as specified and directed. (a) 468 Sqm for GE(East) Area (b) 60 Sqm for GE(West) Area

M & L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in with grey cement & no pigments over Screed bed or bedding layer of mortar 15 mm thick in Cement mortar 1: 4 for laying floor finishes complete all as specified and directed. (a) 1150 Sqm for GE(East) Area (b) Nil for GE(West) Area

M&L for 60 mm coloured machine pressed rubber moulded precast concrete interlocking paver block including any shape and size having 6-8 mm white cement top layer with epoxy coating in colour (Red/yellow) M-35 Grade grey cement and pigment including dismantling of existing floor tiles complete all as specified and directed. (a) 940 Sqm for GE(East) Area (b) NIl for GE(West) Area

M & L PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) including dismantling as in coping incl necessary form work finished even & smooth with using pigment in cement Cement concrete (unreinforced) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified and directed. (a)19 Cum for GE(East) Area (b) 02 Cum for GE(West) Area

Demolition of cement concrete (reinforced) such as beam, roof, beams, shelves, manhole cover chajjas and similar suspended work complete all as specified and directed. (a) 57 Cum for GE(East) Area (b) 05 Cum for GE(West) Area

S&F 300 mm long MS ordinary pattern door spring "plate type" including roller and roller plate complete all specified and directed. (a) 279 Nos for GE(East) Area (b) 356 Nos for GE(West) Area

M&L RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in RCC lintel, shelves, RCC Parapets and the like including necessary form work complete all as specified and directed. (a) 37 Cum for GE(East) Area (b) 04 Cum for GE(West) Area

Repairing of RCC projections, chajjas, roofs, facia etc. by necessary preparation, scrapping, cutting, chiseling, dusting and cleaning exposed reinforcement, surfaces of damaged loose RCC and providing cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate including necessary form work and reinforced with chicken wire mesh and rendering in cement mortar 1:3 using coarse sand in patches area not exceeding 5 sqm each and thickness of RCC member not exceeding 70mm including applying two coats of finishes as provided to the existing surfaces to match with the existing surfaces in at any height complete all as specified and directed. (a) 578 Sqm for GE(East) Area (b) 198 Sqm for GE(West) Area

Taking down steel tubing of 15 mm dia (nominal bore) and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. (a) 2820 RM for GE(East) Area (b) 4200 RM for GE(West) Area

Supplying and laying of CPVC pipes of external dia 16 mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. (a) 2820 RM for GE(East) Area (b) 4200 RM for GE(West) Area

Taking down steel tubing of 20 mm dia (nominal bore) and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. (a) 2040 RM for GE(East) Area (b) 1800 RM for GE(West) Area

Supplying and laying of CPVC pipes of external dia 20 mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. (a) 2040 RM for GE(East) Area (b) 1800 RM for GE(West) Area

Supply and fixing of brass Tee, elbow, reducer, coupling and all other fittings of size 15 mm suitable for CPVC pipes complete all specified and directed. (a) 1300 Nos for GE(East) Area (b) 1400 Nos for GE(West) Area

Supply and fixing of brass Tee, elbow, reducer, coupling etc of size 20 mm suitable for CPVC pipes complete all specified and directed. (a) 1400 Nos for GE(East) Area (b) 100 Nos for GE(West) Area

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. (a) 1620 RM for GE(East) Area (b) 5100 RM for GE(West) Area

Cutting of existing 20 mm bore Steel Tubing for alteration or addition (each cut measured) in position without taking down complete all as specified and directed. (a) Nil No for GE(East) Area (b) 10 Nos for GE(West) Area

Taking down steel tubing and connection including cleaning for re-fixing 15mm old steel tubing and connections in new or old positions (walls, ceiling, floor etc) including fittings (new or old serviceable) required complete all as specified and directed. (a) 75 RM for GE(East) Area (b) 135 RM for GE(West) Area

Taking down steel tubing and connection including cleaning for re-fixing 20mm old steel tubing and connections in new or old positions (walls, ceiling, floor etc) including fittings (new or old serviceable) required complete all as specified and directed. (a) 50 RM for GE(East) Area (b) 135 RM for GE(West) Area

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of internal dia 100mm bore complete all as specified and directed. (a) 550 RM for GE(East) Area (b) (550+ 500) RM for GE(West) Area

S & F CI Hubless Pipes 100 mm bore single socketed in any length with shield coupling SS(304) with EPDM rubber gasket , fixed on walls complete all as specified and directed. (a) 880 RM for GE(East) Area (b) 1100 RM for GE(West) Area

S & F CI Hubless Pipes 100 mm bore single socketed in any length with shield coupling SS(304) with EPDM rubber gasket , laid in trenches or in floors complete all as specified and directed. (a) 100 RM for GE(East) Area (b) 300 RM for GE(West) Area

S & F CI Hubless Pipes 75 mm bore single socketed in any length with rubber ring joints , fixed on walls with shield coupling SS(304) with EPDM rubber gasket complete all as specified and directed. (a) 165 RM for GE(East) Area (b) 650 RM for GE(West) Area

S & F CI Hubless Pipes 75 mm bore single socketed in any length with rubber ring joints , laid in trenches or in floors with shield coupling ss(304) with EPDM rubber gasket complete all as specified and directed. (a) 535 RM for GE(East) Area (b) 600 RM for GE(West) Area

S & F CI Hubless bends with or without access door, Tee, reducer, socket, WC connector etc any radius 100mm size with shield coupling ss(304) with EPDM rubber gasket complete all as specified and directed . (a) 405 Nos for GE(East) Area (b) 800 Nos for GE(West) Area

S & F CI Hubless bends with or without access door, Tee, reducer, socket, WC connector etc any radius 75 mm size with shield coupling SS (304) with EPDM rubber gasket complete all as specified and directed. (a) 345 Nos for GE(East) Area (b) 400 Nos for GE(West) Area

M&L PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed. a) 71 Nos for GE(East) Area (b) 89 Nos for GE(West) Area

S & F in repair 75 mm dia Cast iron floor trap, with CP grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregate) complete all as specified and directed. (a) 450 Nos for GE(East) Area (b) 534 Nos for GE(West) Area

S&F 100 mm Cast Iron cowl, complete all as specified and directed. a) 52 Nos for GE(East) Area (b) 89 Nos for GE(West) Area

M&L for forming construction joints 30 mm deep X 10 mm wide filled with sealing compound grade ‘A’ complete all as specified and as directed. (a) 25 Ten RM for GE(East) Area (b) Nil for GE(West) Area

S&F 40mm bore PVC low density (LDPE) pipe of pressure 6kg/Cm2 fixed to wall or laid in floor, complete all as specified and directed. (a)100 RM for GE(East) Area (b) NIl for GE(West) Area

M & L for 100mm size stainless steel fancy type handle, complete all as specified and directed. (a) 750 Nos for GE(East) Area (b) Nil Nos for GE(West) Area

S&F 300mm long Stainless steel six peg hanger chromium plated as approved by Engr-in-charge complete all as specified and directed. (a) 142 Nos for GE(East) Area (b) 178 Nos for GE(West) Area

S&F for stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed. (a) 495 Sqm for GE(East) Area (b) 560 Sqm for GE(West) Area

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed. (a) 1400 Sqm for GE(East) Area (b) 1600 Sqm for GE(West) Area

M&L for preparation of new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide primer complete all as specified and directed. (a) 960 Sqm for GE(East) Area (b) 900 Sqm for GE(West) Area

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and directed. (a) 50 Sqm for GE(East) Area (b) 50 Sqm for GE(West) Area

M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and directed. (a) 152 Sqm for GE(East) Area (b) 25 Sqm for GE(West) Area

M&L for cement concrete (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in surface channels, drains, coping and benching including necessary formwork wherever required complete all as specified and directed. Note :- Forming fair finished channel for drain using extra cement shall be measured and paid for separately. (a) 15 Cum for GE(East) Area (b) Nil for GE(West) Area

Dismantling of stone slabs and tiles laid in dry of any description or thickness in floors, aprons etc. complete all as specified and directed. (a) 99.50 Sqm for GE(East) Area (b)Nil for GE(West) Area

M&L for precast RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in Chhajjas, cover slab, shelves and similar articles set in CM 1:6 complete all as specified and directed. Note:- Reinforcement shall be measured & paid separately (a) 20 Cum for GE(East) Area (b) Nil for GE(West) Area

M&L for TMT bars 06 to 08 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. (a) 550 Kg for GE(East) Area (b) Nil Kg for GE(West) Area

M&L for Form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work n.exc 200mm thick complete all as specified and directed. (a) 240 Sqm for GE(East) Area (b) Nil for GE(West) Area

M&L plain cement concrete cast in situ 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in copings ,hold fast, back filling of pressed steel frame and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work complete all as specified and directed. (a)34 Cum for GE(East) Area (b) Nil for GE(West) Area

S&F in repair 1.00 MM thick Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred as in garage gates and ventilators chhaja's complete all as specified and directed. (a) 20 Sqm for GE(East) Area (b) Nil for GE(West) Area

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. of Fe-410-W(GdeE-250) quality B to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. (a)400 Kg for GE(East) Area (b) Nil for GE(West) Area

S&F in repair Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including Dismantling plain or corrugated steel sheeting, any gauge, thickness in roof coverings and removal of rubbish off the premises and old unserviceable sheet taken as credit complete all as specified and directed by Engr-in-Charge. (a) 50 Sqm for GE(East) Area (b) Nil for GE(West) Area

S&F MS Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle of Fe 410-w (Gde E 250) quality A complete all as specified and as directed. (a) 500 Kg for GE(East) Area (b) Nil Kg for GE(West) Area

Providing & fixing series windows fabricated from roll formed sections made of galvanised Steel colour coated/Powder coated (Base steel as per IS 513 "D" quality. Galvanized as per IS 277 with zinc of 120 gm/Sqm) with total coated thickness of 0.60 mmcomplete all as specified and directed with following specification. (a) Paint specification:- Coated Section should be with primer coat of epoxy primer of 5-7 microns thick, finish painted with polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns thick or powder coated with pure Polyester Powder up to 50-60 microns thick. (b) Dimension of section :- Section of frame should be of 98 mmx50 mm, section of Mullion should be of 46mmx70mm, section of shutter frame should be of 46mmx46mm, section for fixed glass bead should be of 18mmx25mm and section for fly mesh shutter frame should be of 20mmx40mm. (c) Fixing details:- Frame and mesh shutter sections should be cut to length and mitre joined with corner bracket made of CRCA electroplated. Mullion section should be joined with Frame/Million using Nylon Mullion Cap Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter between Frame and glazed shutter and both sides of fixed glass, Spoon Profile should be used around Fly mesh to fix Mesh in Mesh Shutter. (d) Accessories:-Each Glazed/gauged shutter should be provided with MS powder coated friction Hinges-1 set. High grade Aluminium powder coated Handle-1 No. Each mesh shutter should be provided with SS pivot hinges-1 Set, Handle shall be provided in each shutter. Window frame should be fixed to brick/concrete masonary by using Nylon self expanding caps and driving MS electroplated 80 mm long screws into the caps through frames. (e) Glass :- Glass shutter & fixed glass portions should be provided with glass of 4 mm plain float glass. (f) Mesh:- Mesh Shutter should be provided with a stainless steel 32 gauge fly mesh of 304 grades with 144 holes per square inch. (g) Grill :- Windows should be provided with grill made of 10mm sq MS bars welded to at 150mm centre to centre with 6mmx12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screw. (a) 740 Sqm for GE(East) Area (b) 1014 Sqm for GE(West) Area

Supply and fixing in repair stainless steel wardrobe trolley of any shape and size with side sliding roller clip over stainless steel channel on both side fixed with steel size 33x20x8 inches with sliding rails complete all as specified and as directed. (a) 32 Nos for GE(East) Area (b) Nil Nos for GE(West) Area

Supply and fixing in repair stainless steel modular type basket of size 20x16x8 inches with side sliding roller clip over stainless steel channel on both side fixed complete all as specified and as directed. (a) 32 Nos for GE(East) Area (b) Nil Nos for GE(West) Area

S&F Modular kitchen with following items:- (a) S&F for base unit boxes 580 mm depth of sides top and bottom made 18 mm HDMR boards laminated on both sides with 0.70, mica on internal sides and 1 mm mm decorative mica on outer visible side. Make :- (Qty as per site requirement or as directed by Engineer-in-Charge) (b) All as per item no (a) above but 300 mm depth for above platform hanging boxes. (Qty as per site requirement or as directed by Engineer-in-Charge) (c) S&F innotech Gallery Drawers 84 mm height of depth 500mm with 12mm laminated HDMR base and back panels :- (4 Nos.) (d) All as per item no (c) above but for Drawers 164 mm height :- (10 Nos) (e) S&F soft close hinges :- (29 Sets) (f) S&F stainless steel dish rack or GTPT of size 700 to 800 mm width as required at site. (1 No) (g) S&F PVC cutlery tray :-(01 No) (h) S&F pump 10 Kg gas pump uplift for shutters (05 Nos) (i) S&F stainless steel Bin holder : 01 No (j) S&F stainless steel detergent holder: 01 No (k) S&F Rubber coated plate attachment fitment: 01 No (l) S&F Rubber coated Saucer attachment fitment: 01 No (m) S&F pantry fittings 600mm pantry with 6+6shelves attachment:- 01 No (n) S&F factory made 18 mm thick HDMR cabinet shutters laminated on front side with 1mm decorative laminated and 0.70mm liner on back side all the edges shall be covered with 2mm thick edge bonding tape and 90 degree edge bent finish including all necessary fittings complete all as specified and directed. :- 11 SQM (o) All as per item No (m) above but with cutting for glass as in glass shutter :- 0.50 SQM (p) S&F bottle pullout 2 self of size 200 mm :- 01 No (q) S&F 150 mm decorative handles :-12 Nos (r) S&F 200 mm decorative handles :-12 Nos (s) S&F G Profile mat finish aluminium powder coated black handle for shutter :- 17 Nos (i) 08 Nos for GE(East) Area (ii) Nil Nos for GE(West) Area

M & L for applying minimum 1mm thick wall care water proofing putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed. (a) 19860 Sqm for GE(East) Area (b) 34950 Sqm for GE(West) Area

Supply & fixing Factory made uPVC white colour three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi- chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (a) 180 Sqm for GE(East) Area (b) Nil for GE(West) Area Note :- (a) Glass or wire mesh shall be paid separately. (b) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

AREA DRAINAGE M&L for Plain cement concrete (1:3:6) type C-2, using 40 mm graded crushed stone aggregate as in for surface channels, bed of drains including forms/moulds etc, complete all as specified and directed. (a) 18 Cum for GE(East) Area (b) Nil for GE(West) Area

SEWAGE DISPOSAL Excavating in trenches exc 1.5m wide and n.exc 3 m in depth, for foundations, laying of pipes & cable etc and not exceeding 10 square meter on plan for manholes etc and not exceeding 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. (a) 15 Cum for GE(East) Area (b) 200 Cum for GE(West) Area

S&F 150 mm bore Reinforced concrete pipes, class NP2, laid in trenches and jointed with collars in cement and sand mortar 1:1 Including demolition and breaking up unserviceable drain pipes (Salt glazed ware, AC or Reinforced concrete), set in cement mortar, including laying of 100 mm thick Concrete bed of cement concrete type C-2 (1:3:6) to drain pipes of 150 mm bore including packing under, and hunching against the sides of pipes after they are laid and tested complete all as specified and directed. (Note :- Excavation & earth work shall be measured separately ) (a) 130 RM for GE(East) Area (b) Nil for GE(West) Area

Demolition of cement concrete un reinforced in ground floor and paving not exc 15cm thick (below or above ground level) complete all as specified and directed. (a) 12 Cum for GE(East) Area (b) Nil Cum for GE(West) Area

M&L for PCC 1:2:4 Type B-2, using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. (a) 4 Cum for GE(East) Area (b) Nil Cum for GE(West) Area

M&L for cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) in filling foundation and mass concrete, complete all as specified and directed. (a) 8 Cum for GE(East) Area (b) Nil Cum for GE(West) Area

M&L PCC 1:4:8, type D-2, (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete including demolition of concrete in ground floors and paving’s not exc 15 cm thickness (below or above ground level) complete all specified and directed . (a) Nil Cum for GE(East) Area (b) 5.00 Cum for GE(West) Area

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required of 100/150/200 mm dia pipe complete all as specified and directed. (a) 10 Nos for GE(East) Area (b) 250 Nos for GE(West) Area

Removing excavated material (soils) to a distance exc 250 m but not exceeding 500 m and depositing where directed at a level not exc 1.50 m above the starting point complete all as specified and directed. (a) NIL Cum for GE(East) Area (b) 200 Cum for GE(West) Area

Demolition/breaking of drain pipes of 150 mm size (salt glazed ware, AC or reinforced concrete) set in cement mortar and taking out off trenches and removing the debris from the site complete all as specified and directed. (a) Nil RM for GE(East) Area (b) 1800 RM for GE(West) Area

S&F in repair CI Spun pipe 100mm bore epoxy coated inside and outside and single socketed in any length with or without ears with cement joints fixed to wall with clamps or laid in trenches or in floors complete all as specified and directed. (a) Nil RM for GE(East) Area (b) 500 RM for GE(West) Area

S&F SFMC DWC (Double wall corrugated) 150 mm dia pipes manufactured as per IS-16098 (part-2) having internal surface smooth and external corrugated surface of SN 4 stiffness laid and jointed all as per specified and directed. (a) Nil RM for GE(East) Area (b) 1800 RM for GE(West) Area

M&L concrete bed to drain pipes of size 100 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) complete all as specified and directed. (a) Nil RM for GE(East) Area (b) 500 RM for GE(West) Area

M&L concrete bed to drain pipes of size 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) complete all as specified and directed. (a) Nil RM for GE(East) Area (b) 1800 RM for GE(West) Area

M&L for Providing factory made cover full floor medium duty weight Square/rectangular(size 450mm x 900mm) thickness not less than 75mm set in CM 1:6, as in cover slabs (for manhole, drains etc) with plain fair faces, complete all as specified and directed. (a) Nil Nos for GE(East) Area (b)100 Nos for GE(West) Area

M&L for 15mm thick rendering of brick wall or concrete surface in CM 1:4 finished even & smooth without using extra cement including taking down of cement or cement lime plaster on walls complete all as specified and directed. (a) Nil Sqm for GE(East) Area (b) 460 Sqm for GE(West) Area

M&L plain cement concrete1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in benching, copings etc, including necessary form work complete all as specified and directed. (a) Nil Cum for GE(East) Area (b)09 Cum for GE(West) Area

Demolition of old unserviceable septic tank filling with earth and provision of Septic tank, exc in ordinary soil, foundation in PCC(1:2:4), brick work in CM 1:4, RCC slab cover M-25 including RCC precast manhole cover having 6 mm plate embedded all around/fibre reinforced cover with angle iron frame vent shaft and sludge chambers etc, complete for 100 users and make it fully functional complete as per Drg No TD-217 and all specified and directed. (a) Nil Nos for GE(East) Area (b) 04 Nos for GE(West) Area

Demolition of old unserviceable soak well and provision of Soak well, exc in ordinary soil, foundation in PCC(1:3:6), wells of honey combed soil and solid in M-25 concrete, including intercepting chamber, screen chamber brick work in CM, RCC cover slab in M-25/RR masonry/filling with brick bats complete of size 2.40 M dia X 4.50 M deep complete as per Drg No TD-576 and all specified and directed. (a) Nil Nos for GE(East) Area (b)04 Nos for GE(West) Area

ROAD & PATH Surface excavating not exc 30 cm deep and averaging 15 cm deep and getting out soft / loose soil complete all as specified and directed. (a) 1080 Sqm for GE(East) Area (b) Nil Sqm for GE(West) Area

M&L 75 mm thick Cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in sub base of flooring complete all as specified and directed. (a) 1080 Sqm for GE(East) Area (b) Nil Sqm for GE(West) Area

M&L for interlocking precast colored cement concrete glazing finished pavement blocks 60 mm thick M-35 grade con-forming to IS 1237 laid dry hand packed tightly over and including 50 mm thick layer of sand to the true levelled surface concrete tiles pattern shall be as directed complete all a specified & directed. (a) 1080 Sqm for GE(East) Area (b) Nil Sqm for GE(West) Area

COMMON ITEMS Excavating in trenches not exc 1.5m wide and n.exc 1.5 m in depth, for foundations, laying of pipes & cable etc and not exceeding 10 square meter on plan for manholes etc and not exceeding 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. (a) 160 Cum for GE(East) Area (b) 1200 Cum for GE(West) Area

Returning filling in with approved excavated soil in-cluding spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed. (a) 80 Cum for GE(East) Area (b) 1200 Cum for GE(West) Area

Removing excavated material (soils) to a distance n.exc 50 m and depositing where directed at a level not exc 1.50 m above the starting point complete all as specified and directed. (a) 257 Cum for GE(East) Area (b) NIL Cum for GE(West) Area

Material and labour for precast manhole cover slabs in RCC 1:2:4, type B-1, using 20 mm graded crushed stone aggregate and set in CM 1:4 complete all as specified and directed by the Engineer-in-Charge. Note: Reinforcement will be measured and paid for seperately) (a) 7 Cum for GE(East) Area (b) Nil Cum for GE(West) Area

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. (a) 6300 Kg for GE(East) Area (b) 950 Kg for GE(West) Area

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. (a) 172.44 Cum for GE(East) Area (b) 104.95 Cum for GE(West) Area

M&L for Brick work with fly ash brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:4 complete all as specified and as directed. (a) 79 Cum for GE(East) Area (b) Nil Cum for GE(West) Area

M&L for 15mm thick rendering of brick wall or concrete surface in CM 1:4 finished even & smooth without using extra cement complete all as specified and directed. (a) 304 Sqm for GE(East) Area (b) Nil Sqm for GE(West) Area

M&L Hardcore of gauge n exc. 63 mm, stone boulder deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. (a) 162 Cum for GE(East) Area (b) 2 Cum for GE(West) Area

M&L sand cushion under interlocking paver blocks & sand cushioning to UG cables (8 cm deep before laying of cable and 15cm deep over the cable) including watering and consolidation complete all as specified and as directed. (a) 74 Cum for GE(East) Area (b) NIl Cum for GE(West) Area

M & L for Plain Cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. (a) 5.08 Cum for GE(East) Area (b) Nil Cum for GE(West) Area

Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed. (a) 257 Cum for GE(East) Area (b) 240 Cum for GE(West) Area

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitered/ stopped ends etc complete all as specified and directed. (NOTE: Inner girth shall be measured) (a)360 RM for GE(East) Area (b) Nil RM for GE(West) Area

INTERNAL ELECTRIC SUPPLY Taking down old copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, etc.removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls floors etc complete all as specified and directed. (a) 5929 Point for GE(East) Area (b) 6648 Point for GE(West) Area

Taking down DBs any type and size including MCBs/MCCBs removing materials to store for keeping in safe custody or taking credit and making good the disturbed surfaces of walls, floors, etc complete all as specified and directed by Engr-in-charge. (a) 480 Nos for GE(East) Area (b) 222 Nos for GE(West) Area

M&L for point wiring complete for One light/Fan/Exhaust Fan point controlled by one switch with PVC insulated and unsheathed FRLSH cable 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 20 mm dia PVC conduit medium grade concealed in wall and medium grade PVC conduit not less than 20 mm in roof / floor slab and ceiling, pressed GI concealed terminal boxes not less than 1.6 mm thick of required size and FRLSH cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed. Note :- In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost (a) 3902 Point for GE(East) Area (b) 4046 Point for GE(West) Area

Description all as per Serial item No. 187 here in before but One bell / buzzer point controlled by one bell push button on the same board with other switches or independent with cable size 1.5 sqmm complete all as specified and directed. (a) 150 Point for GE(East) Area (b) 178 Point for GE(West) Area

Description all as per Serial item No. 187 here in before but one light point controlled by two, two way 06 Amp switch with cable size 1.5 sqmm complete all as specified and directed. (a) 93 Point for GE(East) Area (b) 176 Point for GE(West) Area

Description all as per Serial item No. 187 here in before but One 3 Pin, 6 Amp socket outlet point on an independent board with cable size 2.5 sqmm complete all as specified and directed. (a) 608 Point for GE(East) Area (b) 768 Point for GE(West) Area

Description all as per Serial item No. 187 here in before One 3 Pin, 6 Amp socket outlet point on same board with other switches with cable size 2.5 sqmm.complete all as specified and directed. (a) 592 Point for GE(East) Area (b) 712 Point for GE(West) Area

Description all as per Serial item No. 187 here in before but One 3 pin, 16 Amp socket outlet point on an independent board with cable size 2.5 sqmm complete all as specified and directed. (a) 584 Point for GE(East) Area (b) 768 Point for GE(West) Area

M&L for switch modular type single pole one way 1 module 6 amps 240 volts complete all as specified and directed. (a) 4402 Nos for GE(East) Area (b) 5526Nos for GE(West) Area

M&L for bell push modular type 1 module one way 6 amps 240 volts complete all as specified and directed. (a) 150 Nos for GE(East) Area (b) 178 Nos for GE(West) Area

M&L for switch modular type one way 1 module 16 amps 240 volts complete all as specified and directed. (a) 584 Nos for GE(East) Area (b) 768 Nos for GE(West) Area

M&L for socket 6 amps modular type 2/3 pin combined 2 module, 230 volts complete all as specified and directed. (a) 1200 Nos for GE(East) Area (b) 1480 Nos for GE(West) Area

M&L for socket modular type, 2/3 pin, 6 and 16 amps combined 2 module, 230 volts complete all as specified and directed. (a) 584 Nos for GE(East) Area (b) 768 Nos for GE(West) Area

M&L for step type fan regulator, 120W, 1/2 module (Modular) suitable for BLDC Fans complete all as specified and directed by Engr-in-charge. (a) 442 Nos for GE(East) Area (b) 590 Nos for GE(West) Area

M&L for switch modular type two way 1 module 6 amps 240 volts complete all as specified and directed. (a) 186 Nos for GE(East) Area (b) 352 Nos for GE(West) Area

M&L for white cover plate with frame modular type of 03 module complete all as specified and directed. (a) 1668 Nos for GE(East) Area (b) 2000 Nos for GE(West) Area

M&L for white cover plate with frame modular type of 04 module complete all as specified and directed. (a) 220 Nos for GE(East) Area (b) 60 Nos for GE(West) Area

M&L for white cover plate with frame modular type of 06 module complete all as specified and directed. (a) 298 Nos for GE(East) Area (b) 180 Nos for GE(West) Area

M&L for white cover plate with frame modular type of 08 module complete all as specified and directed. (a) 174 Nos for GE(East) Area (b) 90 Nos for GE(West) Area

M&L for white cover plate with frame modular type of 12 module complete all as specified and directed. (a) Nil Nos for GE(East) Area (b) 430 Nos for GE(West) Area

S&F modular type blanking plates, one module complete all as specified and directed. (a) 50 Nos for GE(East) Area (b) 68 Nos for GE(West) Area

M&L for bell electric heavy duty Ding Dong type 230 volts single pole complete all as specified and directed. (a) 150 Nos for GE(East) Area (b) 178 Nos for GE(West) Area

M&L for ceiling rose surface bakelite 3 terminals complete all as specified and directed. (a) 1718 Nos for GE(East) Area (b) 2210 Nos for GE(West) Area

S & F angle type Lamp holder insulated body with back plate for batten fittings complete all as specified and directed. (a) 450 Nos for GE(East) Area (b) 534 Nos for GE(West) Area

Supply only LED bulb 9 Watt complete all as specified and directed. (a) 450 Nos for GE(East) Area (b) 534 Nos for GE(West) Area

Supply & fixing bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 10 W LED, 6000K , 120 lumens/watt including inbuilt electronic driver complete all as specified and directed by Engr-in-charge. (a) 260 Nos for GE(East) Area (b) 178 Nos for GE(West) Area

S&F LED tube light fittings 1200 mm, 20 W higher energy saving decorative ultra slim square profile LED lighting fixture with extruded aluminium housing environment friendly, energy efficient and all necessary fixing arrangement complete all as specified and directed. (a) 1167 Nos for GE(East) Area (b) Nil Nos for GE(West) Area

Supply and fixing 45 Watt pressure die-cast aluminium housing street light with system lumen of 6300 lm and system efficiency of 140 lm/w, IP-66, IK-10 single piece die cast including spigot, dia 48-76 mm, LED life time (L70B50) 75000 burning Hrs with integrated optical cover. Street light sould have standalone lighting control system with auto ON/OFF based on DUSK/DAWN timings, preset time setting with monthly variations (Jan to Dec), in built real time clock for switching includes dimming profile for energy saving, drift not exceeding max 2 minutes/year, clock retention upto 5 years, auto switching off secondary power for module , dimmable driver based on PWM control, dim to off with high/low voltage cut off with 440 Volts protection for 8 Hrs complete luminiarie including driver and astro module, surge protection as per IEC 61000-4-5 complete all as specified and directed. (a) 76 Nos for GE(East) Area (b) Nil Nos for GE(West) Area

Supply and fixing sheet metal enclosure MCB distribution board, double door with IP-43 IK-09 protection with metal door single phase & neutral 240 volts 12 way with 125 Amp rated bus bar, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. (a) 150 Nos for GE(East) Area (b) 178 Nos for GE(West) Area

M&L for MCB single pole 240 volts 5 to 32 amps B curve with rupturing capacity 10 KA using thimbles of required size complete all as specified and directed. (a) 1500 Nos for GE(East) Area (b) 1780 Nos for GE(West) Area

M&L for MCB single pole & neutral 240 volts 32 amps, C curve with rupturing capacity 10 KA using thimbles of required size complete all as specified and directed. (a) 150 Nos for GE(East) Area (b) 178 Nos for GE(West) Area

S&F of exhaust fan, Metal body, AC single phase, 230 Volt heavy duty of size 300 mm sweep 1400 RPM including suitable louvers and making connection with twisted copper flexible wire 23/0.076mm and Cutting, opening circular/Rectangular in shape hole on wall for fixing of exhaust fan of size 300 mm sweep including plastering and making good the disturbed surface surrounding complete all as specified and directed by Engr-in-charge. (a) 142 Nos for GE(East) Area (b) 178 Nos for GE(West) Area

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten (2 feet) 10 W, 6500 K, 230V, 120 lumens/watt, with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed by Engr-in-charge. (a) 166 Nos for GE(East) Area (b) 178 Nos for GE(West) Area

S&F in repair Decorative type wall light fixture made up of Metal base synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish )B-22/E27 base) with 1 No 9 Watt LED bulb, 230 Volts,6000K complete all required electrical connecting arrangement complete all as specified and directed. (a) 442 Nos for GE(East) Area (b) 534 Nos for GE(West) Area

Supply and fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6500 K,120 lumens/watt, 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed by Engr-in-charge. (a) Nil Nos for GE(East) Area (b) 1456 Nos for GE(West) Area

Supply & fixing in repair LED Building security light 25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 1.0 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts complete all as specified and directed by Engr-in-charge. (a) Nil Nos for GE(East) Area (b) 220 Nos for GE(West) Area

Taking down carefully ceiling fan of any sweep complete with all accessories, dismantling blades and deposit in safe custody of AGE E/M Yard-I & AGE E/M (W) for BER procedure complete all as specified & directed. (a) 442 Nos for GE(East) Area (b) 590 Nos for GE(West) Area

Supply & fixing Exhaust fans, plastic body, AC, single phase, 230/240 V of size 250 mm sweep with louver including provision of flexible three core cable from ceiling rose to terminal for making connection, fitting on wall, including Cutting, opening circular/Rectangular in shape hole on wall for fixing of exhaust fan of size 250 mm sweep including plastering and making good the disturbed surface surrounding and all necessary fixing accessories complete all as specified and as directed by Engr-in-charge. (a) 150 Nos for GE(East) Area (b) 178 Nos for GE(West) Area

Supply and fixing digital storage water heater (Geyser) square/oval type of capacity 25 Litrs, 230 Volts made of ultra thick super cold rolled steel plates, feroglass dry powder coating technology inner tank and heating element heavy duty mag-nesium anode rod with steel core to protect enamelled tank from rust and corrosion 2 KW Capacity, 230 Volt, 1 Phase AC, 50 Hz, BEE 5 Star, Energy saving high density PUF insulation, glass coated heating performance and resistance to oxidation and carbonation at high tempratures rated complete with all accessories such as safety valve, thermostat, NRV, connection piece and writing MES no. in black synthetic enamel paint/engraving tool etc complete all as specified & directed. (a) 110 Nos for GE(East) Area (b) 40 Nos for GE(West) Area

M&L Taking down water heater (Geyser) 25/50 ltr capacity or any type and deposit AGE E/M Yard, Re-fixing water heater (Geyser) 25/50 ltr capacity or any type after complete of civil work including 4 Nos full threaded fastener of size 100x10 mm with, 2/4 No washer, 600 mm length PVC connection hot series each 2 Nos & suitable plug top of 16 Amp capacity complete all as specified and directed by Engr-in-charge. (a) 40 Nos for GE(East) Area (b) 138 Nos for GE(West) Area

Supply & fixing 1200 mm sweep ceiling fan copper wound with remote operated, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.00, Air delivery minimum 210 CMM, 350 RPM (tolerance as per IS : 3742019), THD less than 10%, suitable for remote operated speed control unit for speed control and all remaining accessories including safety pin, nut bolts, washers, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete all as specified. (a) 442 Nos for GE(East) Area (b) 590 Nos for GE(West) Area Note :- (a) Make, Model & Colour of fan as approved by GE. (b) Writing MES No. in black synthetic enamel paint by the contractor. (c) T & P will be provided by the contractor for reaching any height of the ceiling.

Supply and fixing wall mounting fan 300mm sweep , 1400 RPM with approved/white colour air delivery 65 m3 /min single phase 220volt 50Hz with contrl pull cord for fan on/off and oscillation on/off complete mounting accessories,b;ade ,guard set,guard ring and including PVC insulated three core 23/0.0076 copper cable and suitable size of flexible conduit from celling rose to fan motor and writing MES No. in black synthetic enamel paint/engraving tools etc complete all as specified and directed. (a) 8 Nos for GE(East) Area (b) NIl Nos for GE(West) Area

S&F Modular AC BOX Power unit with Socket Plug top and MCBs with Single pole and neutral enclosure with a two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed by Engr-in-charge. (a) 308 Nos for GE(East) Area (b) 356 Nos for GE(West) Area

S & F in replacement of sheet metal enclosure distribution board, triple pole and neutral (VTPN) AC 440 Volts, 04 way with 200 Amp rated copper bus bar and metal door with IP-54 & IK 09 protection along with cable end box for above DB and flush to wall including cutting chases to wall for fixing DB and making good the disturbed wall surface complete all as specified and directed with comprising of the followings:- (a) MCCB 125 Amp, 04 Pole AC 415 Volts of 16 KA breaking capacity complete -01 No (b) MCB SP AC 240 Volts of 6 to 32 Amp ‘C’ curve, 10 KA breaking Capacity-12 Nos (a) 22 Nos for GE(East) Area (b) Nil Nos for GE(West) Area

Taking down electric metre and re-fixing on new board after rewiring in replacement of unserviceable items complete all as specified and directed. (a) 142 Nos for GE(East) Area (b) 178 Nos for GE(West) Area

M&L in replacement of earthing complete with galvanized earth plate electrode 600 x 600 x 6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level) with top edge of the plate not less than 1.50 M below normal ground level , con-nected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTE:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor complete all as specified and directed. (a) 62 Nos for GE(East) Area (b) 88 Nos for GE(West) Area

Supply and laying light grade GI pipe of dia 50 mm laid in trenches, wall, and floors for cable protection complete all as specified and directed by Engr-in-charge. (a) Nil RM for GE(East) Area (b) 100 RM for GE(West) Area

Supply, laying and testing cable XLPE insulated, screened, PVC bedded galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 4 Core complete all as specified and directed by Engr-in-charge by Engr-in-charge. (a) Nil RM for GE(East) Area (b) 420 RMfor GE(West) Area

Supply & Laying sub class `B’ bricks old sizes over the HT/LT cable laid flat for protection of cable complete all as specified and directed by Engr-in-charge. (a) Nil Nos for GE(East) Area (b) 3000 Nos for GE(West) Area

Pooja Singla Builders And Engineers Pvt Ltd (BID ID -3393654)

LUMOS INFRA PVT LTD (BID ID -3393902)

GANGA INFRABUILD PVT LTD (BID ID -3389616)

NSC Projects Pvt. Ltd. (BID ID -3393878)

VERMA BROTHERS (BID ID -3394010)

M/s Highway Construction (BID ID -3389778)

M/s Matadeen Ramchandra Agarwal (BID ID -3392450)