Prefabricated PUF Soil Testing Training Hall with allied Electromechanical works at Govt Seed Multiplication Farm Kawa Udhampur

Amount

Earthwork in excavation by manual means over area for levelling purpose including disposal of excavated earth up to 1m from cutting edge and should be disposed in near-by all kind of soil. Total = 668.5 ft³ = 18.92 Cum Area to be excavated keeping in view the earthquake resistance for which an MS mesh (10 mm) is to be provided in the base foundation of the plinth.

Providing and laying of cement concrete (1:5:10) using 40mm nominal size Nallah stone. Total = 140.75 ft³ = 3.98 Cum

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size Total = 477 ft³ = 13.5 Cum

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level 10mm bar of length Plinth Tie beam 8mm bar of length for Rings of Tie beam 16mm Column Foundation 10mm bar for foundations mesh Total = 280 Kg

Centering and shuttering including strutting, propping etc. and removal of form work for: 4.6.1 Foundations, footings, bases for columns Area = 33.44 Sqm

12 mm cement plaster to plinth wall of mix 1:3 (1 cement: 3 fine sand) Area = 7.103 Sqm

CCement concrete flooring and foundation as per the site requirement 1:2:4 (1 cement: 2 sand: 4 graded stone finished with a floating coat of neat cement including cement slurry but excluding the cost of noising of steps Complete 50 mm thick 20 mm size stone aggregate. Floor area = 46.45 Sqm

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead up to 50m and lift up to 1.5m. Total = 0.63 Cum

Steel work welded in built up section/framed work including cutting, hosting, applying a priming coat using structural steel. In gratings, frames, guard bard, ladders, railings etc. trusses including primer and enamel paint including nut bolts, kingpost, struts etc. Column RHS Hollow Pipe Section Rectangular Sections of size For Truss and side rails MS Square Plates (09Nos) of size (1’ x 1’ x 22mm) 40 MS Anchor Bolts of size 20mm x 750mm Total Weight = 1395.55Kg

Supply and installation at site of Prefabricated PUF (Poly-Urethane Foam) Panels of size 60 mm thick Fire proof Panels for walls (PPGI finish on both sides) and 70 /100 mm thick Colour Coated Corrugated PPGI sheet for Roof to make a closed structure on the outer frame including doors and windows (made out of Powdered coated aluminium of gauge not more than 12 mm) as per drawings approved by Engineer in charge. Prefabricated Sandwich PUF panels with Cam toggle type fasteners fitted and self-locking PVC gaskets fitted on all sides of wall and ceiling/roof including rivets, Silicones, Anchor fastener, self-drilling screw and all other allied accessories required for the installation/erection of PUF panels. Wall to wall cam locking system. Internal/External flashing to be provided. Job includes Cladding on all walls including sunshade on all windows and outer doors. Qty = 99.12 Sqm

Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Floor area = 46.45 Sqm

False Ceiling Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminium primer on both sides & edges, including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodized aluminium (with 15 micron anodic coating) T- sections 35 x 15 x1.5 mm size main runners, cross runners 23.5 x 19 x 1.5 mm fixed to main runners placed 600 mm centre to centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia. M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of primer and paint as per Direction of Engineer Incharge. Roof area = 46.45 Sqm

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single Socketed pipes 110 mm dia Length of pipe = 25' = 7.62 mtr

Providing and fitting of sanitary items in bathrooms 01 nos and make it fully functional by P/F 1 nos. English Seat with all accessories, 1 nos. urinal pot with all accessories, 1 nos. wash basin of size not less than 18" with all accessories, looking mirrors of appropriate size, Towel rods 1nos., 1 nos Soap holder, P/F of Bibcocks and all other accessories. Providing and laying of 150 mm PVC pipe of reputed make for sewage from bathroom to Soakage Pit of Standard Size and 75 mm PVC pipe for urinal and wash basin. Providing and laying of PVC pipe of size 50 mm for water supply system to all the bathroom from source to the bathroom along with all allied fitting and accessories. It also includes construction of main holes, PVC cover at the top of the main/check hole, fitting of gas pipe along with connections with the bathroom to make bathroom fully functional with all other allied accessories. The job also includes P/F of 1000 Ltr. P.V.C water storage tank fitted on structural steel stand along with all allied accessories and connections. Creation of Soakage Pit is also inclusive in the job. The job also includes the laying of GI/CPVC pipes ½ inch for water connection to the facilitation centre from the main water supply line approx. 40 mtr in lenth. P/F of 15 litres water gysers – 01 NosThe job is inclusive of all material cost, labour cost and taxes

Providing and fixing 0.50 mm pre-profiled colour coated corrugated sheets (CGI) to laid over frame work of trusses columns, purlins and side rails using hot dipped zinc coated self-drilling hexagonal washers, fastener etc. Roof area= 55.18 Sqm

Providing & fixing aluminum work for doors, windows, ventilators & partitions with extruded built up standard tubular sections/appropriate Z sections & other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. size including necessary filling up of gaps at junctions i.e. at top, bottom & sides with reqd. EPDM rubber/neoprene gasket felt etc. Al sections be smooth, rust free, straight, mitred & joined mechanically wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P. brass/stainless steel screws, all complete as per architectural drawings & the directions of Engineer-in-Charge (glazing, paneling & dash fasteners be paid separately.) Powder coated aluminum (min thickness of powder coated 50 microns) with 3 Track window (1mx1.2m)–05Nos., Door of size (1mx2.1m)–01 Nos, Door of size (0.76mx2.1m)–01 No., and Ventilators of size (0.3mx0.3m)–01 Nos. Qty. = 70 Kg

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) Qty = 1.42 Sqm

Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S Flat 15x3 mm and nuts and bolts complete. Galvanized M.S wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides. Qty. = 1.42 Sqm

Complete electrification along with accessories which includes copper wire 1mm/1.5mm/2.5mm, PVC batten, PVC box 12 modular+sheet-01No each, PVC box +8 modular+sheet-03No each, PVC box +3modular+sheet-05No each, Providing and fitting of 06 nos. 20 watt LED Panel of size 600x600mm - 2 no. ceiling fans - 4 no. exhaust fan 12" dia with lovers - 4 no. 20W 4' Led Tube light including Providing and fitting of 100W LED Flood Light. Job also includes Providing of laying of main service line Al 10 sq. mm from main pole to MCB box, 63A change over It also includes providing of 2.5 sq.mm pvc wire, 4mm pvc wire, switches, socket, conduit,, MCB and other allied items. Earthing at site by earth excavation of size 3'x3'x6' and insertion of earthing rod along with filling of earth and coal+salt mixture in layers, connecting of earthing rod to the MCB box by p/f of copper wire 10mm-20 mtrs along with nuts and bolts and covering the pit with P.C.C. (1:3:6) and main hole 9"x9"-01 no.. as per LMR

Job charges for priming and painting of the complete structure with two coats of superior quality steel primer and two coats of superior quality steel paint. Job includes the cost of material, labour charges and all taxes.

M/s TARSEM LAL (BID ID -2274854)

M/S ISHAN ELECTRICAL and MECH. ENGG. WORKS (BID ID -2273736)