CERTAIN SANCTIONED SPECIAL REPAIR WORKS OF B/R AND E/M NATURE AT DAMANA UNDER GE JAMMU

Amount

B/R Portion: - Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

Material and labour brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed.

Taking down cement plaster of any description on brick walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, etc complete removal of debris outside MOD land (including all necessary scaffolding, lifting arrangement upto 12 mtr height for external surfaces) complete all as specified and as directed.

Material and labour rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6), surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour rendering 5mm thick on fair faces of concrete surface of ceiling in cement mortar (1:3), surface finished even and smooth surface without using extra cement complete all as specified and as directed.

Material and labour preparing of new plastered surface of wall and applying 1mm thick wall care putty and applying two coats of distemper oil bound over primer coat complete all as specified and as directed by Engineer-in-Charge.

Material and labour preparing of new plastered surface of ceiling and applying two coats of distemper oil bound over primer coat complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and complete removal of debris outside MOD land complete all as specified and as directed.

Material and labour for glass fibre reinforced modified cementitious coating system before the final coat of Latex Shield 2K (or equivalent) in sunken treatment. Base coat : Berger HS Latex Plus (or equivalent), Consumption base coat : 0.3 Kg/Sqm, Reinforcement : Glass fiber, Second and Third Coat : Latex shield 2K (or equivalent), Consumption top coat : 3 Kg/Sqm, System requirements : density : 2.00 Kg/ltr, Compressive strength : 0.5 N/Sqmm. (i) Wall penetration through the RCC slab must be sealed using Berger HS Repir (or equivalent). (ii) Intersection of base slab with wall must be provided with a 50mm fillet using Berger HS Latex plus (or equivalent) modified mortar with a bonding coat of Berger HS Latex plus (or equivalent) modified cement slurry upto 1.5 mtr. (iii) All depressions, unevenness, surface honeycombing shall be repaired using Berger HS Latex plus (or equivalent) modified polymer mortar with a bonding coat of Berger HS latex plus (or equivalent) modified cement slurry, including cleaning of RCC surface to remove dust, loose particles, etc with compressed air or any other suitable technique depending on site conditions, grinding any sharp edges etc complete all as specified and as directed.

Material and labour plain cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete, RCC sunken portion as base layer for receiving top layer complete all as specified and as directed by Engineer-in-Charge.

Dismantling floors, hearth or wall tilling including cement mortar bedding (but not backing) removing unserviceable materials outside MOD area and rubbish off the premises complete all as specified and as directed.

Material and labour plain cement concrete (1:2:4) type B-0 (using 12.50mm graded crushed stone aggregate) 25mm thick as in sub base for floor tiles complete all as specified and as directed.

Material and labour non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile not exceeding 0.18 Sqm, in floors etc. fixed with approved tile adhesive and provided with 4mm spacer, spacer gaps to be filled with approved epoxy grout complete all as specified and as directed by Engineer-in-Charge.

Material and labour glazed ceramic tiles 300 x 450 x 7mm thick on vertical surface such as in skirting, dado etc. fixed with approved tile adhesive and provided with 4mm spacer, spacer gaps to be filled with approved epoxy grout complete all as specified and as directed by Engineer-in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MOD land complete all as specified and as directed.

Material and labour granite (of any type) 16-20mm thick (tabled rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in colour cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar (1:6) edges of slab to be rounded from all sides (including cutting, wastage and polishing) complete all as specified and as directed.

Dismantling PVC water tank/ Demolition of RCC water storage tanks of capacity exceeding 500 but not exceeding 1000 litres and removing from site complete all as specified and as directed.

Supply and fixing rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part - I including dismantling of existing water tank, including 20mm ball valves, 20mm tank nipple complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs 25mm outer dia CPVC gate valves complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 15mm complete all as specified and as directed.

Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 20mm complete all as specified and as directed.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and as directed.

Supplying and laying of 25mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and as directed.

Supply and fixing in repairs vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) including PVC seat cover white closed pattern with recessed bottom and connection to drain or outgoing pipe and flushing pipe complete all as specified and as directed.

Supply and fixing in repair vitreous china squatting pan 'Orrisa' pattern size 580 x 440 mm white with integral foot rest, 'P' or 'S' trap and lime concrete bedding complete making good disturbed ground complete all as specified and as directed.

Supply and fixing in repairs 10 litres capacity PVC low level flushing cistern including 32mm dia PVC flush pipe, fixing in position with PVC connection pipe of 15mm x 450mm long etc complete all as specified and as directed.

Supply and fixing in repairs vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including 32mm bore PTMT waste coupling, PVC connection pipe of 15mm x 450mm long and 32mm PVC waste pipe complete all as specified and as directed.

Supply and fixing in repairs vitreous china wash hand basin, oval shape counter top, any coloured including 32mm bore PTMT waste coupling, PVC connection pipe of 15mm x 450mm long and 32mm PVC waste pipe complete all as specified and as directed. Makes: - Cera Cat Part No : S2030102 or equivalent in makes as specified in Group - 1 of Appx 'F'.

Supply and fixing in repairs 15mm bore chromium plated cast copper alloy bib taps fancy type with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in reparis health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect all as specified and as directed.

Supply and fixing in repairs 15mm bore chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs 15mm bore stop valves, fancy type, chromium plated with long shank and cup (concealed type), screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fixing in repairs 15mm dia angle/ stop cock of chromium plated, glossy finish complete all as specified and as directed.

Supply and fixing in repairs brass chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe of 15mm bore complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs tubular towel rail 20mm dia 'D' type 60cm long between flanges chromium plated complete all as specified and as directed.

Supply and fixing in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls or floor etc complete all as specified and as directed.

Supply and fixing in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls or floor complete all as specified and as directed.

Material and labour in repairs PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete all as specified and as directed.

Supply and fixing in repairs PVC (SWR) bends/ Tee/ 'Y' 110mm dia any radius with access door complete all as specified and as directed.

Supply and fixing in repairs PVC (SWR) bends/ Tee/ 'Y' 75 mm dia any radius with access door complete all as specified and as directed.

Supply and fixing in repairs PVC (SWR) vent cowl 110mm bore complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt) and removing from site complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and not exceeding 4 Sqm each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt) and removing from site complete all as specified and as directed by Engineer-in-Charge.

Material and labour factory made pressed steel frames of size 105 x 60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate etc. complete including bottom of each chowkhat to be welded with 02 no's 25 x 25 x 3mm angle iron projecting 10cm on either side including PCC (1:3:6) type C-0 in back filling of chowkhats and two coats of synthetic enamel paint over one shop coat of zinc chromate primer on all exposed surface complete and one coat of tar on the ends of steel surface in contact with bricks/ concrete surface. Colour/ shade will be approved by Engineer-in-Charge complete all as specified and as directed.

Supply and fixing pre-painted (factory painted) box type mild steel windows/ Ventilator (factory made) outer frame made out ERW tube 'P' section 65 x 45 x 25 mm and shutter of ERW tube 'P' section 50mm x 35mm x 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter fixed with galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm including necessary GI wire staples etc on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes complete all as specified and shown on drawings No CEPZTD-324/07 Sh 1/3 to 3/3 all as directed. Notes: - The quoted rates shall also include: - (i) Two coats of synthetic enamel paint over one shop coat of zinc chromate primer on all exposed surface complete and one coat of tar on the ends of steel surface in contact with bricks/ concrete surface. Colour/ shade will be approved by Engineer-in-Charge. (ii) 4 no's MS steel lugs made of 20 x 5 mm iron flat 200 mm long. (iii) 10 mm Sq Bar grill/ guard bar design as per drawing. (iv) PCC block for embedding lugs complete. (v) Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete. (vi) 3mm thick pin head glass sheet quality and glazing with oil putty including glazing pins or spring clips.

Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows and other frames/ chowkhat of size 45 x 70 mm (+ 5 mm) comprising of virgin PVC polymer of 'K' value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), minimum compressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class 'A' category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with mild steel hold fast/ lugs/ stainless steel dash fasteners of required dia and length complete all as specified and all as per directions of Engineer-in-Charge.

Supply and fixing 28 to 30mm thick (stile) factory made solid PVC moulded door shutter with wood free EPS, with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supply and fixing in frame at site as per specifications and drawing shown in SSR complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or metal frame including punching or drillilng out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and as directed.

Supply and fixing 3mm figured glass pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Supply and fixing butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised 100 mm long complete all as specified and as directed.

Supply and fixing aluminium anodised bow handle fabricated type extruded section of 150mm long complete all as specified and as directed.

Supply and fixing aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed.

Supply and fixing aluminium anodised sliding door bolts of 300mm long with hasp and staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

Material and labour for preparation of old painted surface of steel of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed.

E/M Portion: - Taking down old unserviceable copper/ aluminium point wiring concealed/ batten (light, fan, socket or power) complete, including fixtures and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/ iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

Taking down carefully unserviceable distribution boards of any type/ size with MCB's and disconnecting and making good disturbed surfaces complete all as specified and as directed.

Material and labour in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sqmm for phase and neutral and one run of 6.0 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/ neutral and one run of cable for earth will be measured and paid as one unit length including taking down old wiring complete all as specified and as directed. Note: - Wiring shall be done in proper colour coding.

Material and labour in replacement for complete point wiring with 1.5 Sqmm two single core multistranded copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 Sqmm copper conductor flexible FRLS insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall, plastering after concealing conduit, including modular galvanised flush boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc and including making good the disturbed surface as per existing complete all as specified and as directed by Engineer-in-Charge for the following: -

Description all as per Ser item No 59.00 here-in-before but for multi 5 pin 5 amp socket outlet on same board ISI marked complete all as specified and as directed.

Description all as per Ser item No 59.00 here-in-before but for multi 5 pin socket outlet 5 amp socket on independent board ISI marked complete all as specified and as directed.

Description all as per Ser item No 59.00 here-in-before but for multi 6 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 Sqmm copper conductor multistranded cable PVC insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 20/25 mm dia and unsheathed copper conductor multistranded cable 2.5 Sqmm as earth wire FRLS PVC insulated in green color complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement modular socket, 6A - 5 pin combined 2 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing in replacement modular switch 1 module 6A, 1 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing in replacement ceiling rose, 3 Pin/ PVC/ polycarbonate isolated body ISI marked complete all as specified and as directed.

Supply and fixing in replacement modular switch 1 way 16A, 1 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing in replacement modular socket 6A/16A - 6 pin combined 2 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing in replacement LED lights fitting 1 x 20W, 220V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.9, 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing in replacement LED lights fitting 1 x 10W, 220V, AC decorative box type complete with LED tube rod 10 watts driver, holder and power factor >0.9, 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Material and labour for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Supply and fixing in replacement SPN 40 to 63 Amp rating 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 6 to 32 Amp complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing electric water heater, storage type steel body with stainless steel, polymer coated inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and as directed.

Material and labour for fixing of 4 No's rawl plug of suitable size (4" - 6") nuts and bolts for hanging of geysers on wall complete all as specified and as directed.

Supply and fixing PVC connection of size 15 mm dia with PTMT nuts of length 450 mm long (hot series braided, threaded and cold series) complete all as specified and as directed by Engineer-in-Charge.

Supply, fixing and testing pressure feed gaseous vaccum type chlorinator (Chlorination through gas feeding plant) conforming to IS 10553 Part - 4 with heavy duty PVC injector, NRV, gauges, having capacity 1000 gm/hr including taking down of old unserviceable chlorination/ dozing plant and deposit to MES store complete all as specified and as directed.

Supply and fixing new chlorine cylinder capacity 100 Kg filled with chlorine gas fitted with valves and valve guard complete all as specified and as directed.

Supply, fixing and testing multi stage monobloc pump with motor set three phase, 3 HP, 5 stage suction 38mm, delivery 32mm, speed 2850 RPM, 50 Hz, stainless steel impeller aluminium body complete all as specified and as directed.

Supply and fixing chlorine cylinder emergency kit made of heavy duty MS plate with chemical grade powder coated, including cylinder valve hood assembly, cylinder valve cap with silver coated valve, yoke and chain assembly for bosy wall leak, gaskets, silver coated valves complete all as specified and as directed.

Supply and fixing chlorine test kit with coloured ample complete with all testing fitments and OT solution in Rexene finished box complete all as specified and as directed.

Supply and fixing automatic star delta starter 415 Volts, upto 10 HP for chlorination pump and motor including of wall mounted stainless steel box, 16 Sqmm Cu cable 4 line approx 5 RM each line and cu thimbles to connect with starter and motor, including taking down of old unserviceable starters from wall and deposit to MES store complete all as specified and as directed.

Supply and laying in replacement of pipe galvanized, "Medium class", including fittings 20mm dia complete all as specified and as directed.

Supply and fixing in replacement of PPR Gate valves (Brass insert) of 20mm bore complete all as specified and as directed.

Supply and laying in replacement PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 4 Sqmm, 4 core, 1100 Volts grade complete all as specified and as directed.

SHARMA CONSTRUCTION COMPANY (BID ID -3402489)

M/s Koul & Sons (BID ID -3410523)

M/S VERMA ENTERPRISES (BID ID -3410225)