Renovation of IEI and EEI to Ice Plant under Fisheries Department at Nimbutala

Amount

Wiring for light/fan point/exhaust fan point/call bell point with 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit with piano type switch, phenolic laminated sheet, suitable size M.S box and earthing the point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable etc. as required.

Group - C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

5/6 A switch

3 pin 5/6 A socket outlet

Supplying and fixing metal box of 150 mm X 75 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 way , Double door

8 way , Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator

4 way (4 + 12), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required

Supplying of Surface mounted LED Batten Luminaires with Lamp type 20W LED 6000K, Make;- Havells, E-LITE LED PRIDE PLUS or its equivalent as approved by Engineer - in - Charge.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying of Surface mounted 10W LED bulkhead fitting back lit luminaire, Make;- Havells, HEXA 10W-IP66 , Cat No. HEXAFT10WLED857SSYMBOPC or its equivalent as approved by Engineer - in - Charge.

Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying & fixing of 10W LED lamps with light output of 1425 lumen Make:- Havells or its equivalent .

Supplying and installation of 50W LED high bay Energy saving, environment friendly & robust IP65 protected LED midbay with PDC housing suitable for ceiling(surface/suspended) mount with hanging chain i/c G.I clamp connections, testing and commissioning Make :- Havells, Model : ILIOSBAY PLUS HIGHBAY, Lamp type 50W LED ,Item description ILIOSBAYPLUSHBP50WLED857SP90DTOPC or its equivalent as approved by Engineer- In - Charge .

Supplying & fixing of LED 45 W Street Light made up of pressure die cast aluminium housing with high power LEDs and lens embedded PC cover hjaving top opening having IP66 protection on existing pole Make: Havells, Model ENDURA SUNDOWN, Cat No. ENDURASUNDOWNSL45WLED765PASYBOPC or its equivalent as approved by Engineer - in Charge i/c connections etc. as required.

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required

Supplying of 5 star, 26W (BLDC Type) energy saving A.C Ceiling fan (1200mm sweep) for operation of 230V, with all accessories etc as required. Make:-Havells. Model : Efficiencia Neo (BLDC 26W) or Equivalent as approved by EIC.

Installation, testing and commisioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper condutor, single core cable etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying of Exhaust Fan 250mm Sweep (Non Mettalic Type) with all accessories etc as required.Make:-Havells ,Ventil Air-DX White or its Equivalent as approved by EIC

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Upto 450 mm sweep

Supplying & Installation of Exhaust Fan 600mm Sweep operation on single phase 230V with all accessories etc as required.Make:-Havells ,Model: Turbo Force SP or Equivalent as approved by EIC

Supplying of Pedestal Air Ciculator Fan 750mm Sweep operation on single phase 230V with all accessories etc as required.Make:-Havells ,Model: Turbo Force or Equivalent as approved by EIC

Fabrication and Supplying of Street Light Pole made out of 65mm dia "B" Class ISI marked GI Pipe of 6 mtrs long with earth stud and coupled with 32mm dia, 1 mtr long 'B' class ISI marked (single Arm) i/c bending the pipe with required shape and fixed at the top of the pole with necessary reducer/coupler , 300mm x 300mm x 6mm thick MS Base Plate welded at the bottom of the pole, fixing of SMC box of Size 200 x 140 x 95mm, 4 way connector & 6Amps MCB with clamping arrangement for SMC Box i/c painting with one coat of mettalic primer and two coats of synthetic enamel paint as required as per direction of Engineer - in - Charge.

Fabrication and Supplying of Street Light Pole made out of 65mm dia "B" Class ISI marked GI Pipe of 6 mtrs long with earth stud and coupled with 2 Nos. 32mm dia, 1 mtr long 'B' class ISI marked (Double Arm) i/c bending the pipe with required shape and fixed at the top of the pole with necessary reducer/coupler , 300mm x 300mm x 6mm thick MS Base Plate welded at the bottom of the pole, fixing of SMC box of Size 200 x 140 x 95mm, 4 way connector & 6Amps MCB with clamping arrangement for SMC Box i/c painting with one coat of mettalic primer and two coats of synthetic enamel paint as required as per direction of Engineer - in - Charge.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required

Above 4.5 metre and upto 6.5 metre

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required

Supplying of following sizes of XLPE insulated Heavy duty armoured Aluminium conductor UG cable of 1.1 KV grade conforming to IS:7098 (Part-I) and IS No. 1554 (Part-I)) 1988 as applicable Make: CCI/Gloster/Havells/Polycab/Finolex

10 Sqmm x 2 core

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required.

50 mm dia (OD-50 mm & ID-38 mm nominal

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required

Upto 35 sq. mm

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

Supplying, installation, testing and commissioning of ASHLOK make SEE brand safe earthing electrode type-39, 80mm dia, length 2 mtrs (short time current -52.6 kA rms for 1 sec, peak-125.6 KA) with back fill compound including providing masonary enclosure with cover plate having locking arrangement etc. as required.

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required

Providing and fixing 4.00mm dia copper wire on surface or recess for loop earthing as required.

Suppying & fixing of 100A TNP Busbar(Size : 40mm x 6mm -400mm length - 4 Nos), 01 No. 4pole - 415V 100A fixed thermal & fixed magnetic 25 KA breaking capacity MCCB , 03 Nos. 4 pole - 415V 63A fixed thermal & fixed magnetic 16 KA breaking capacity MCCB & 4 Nos. 100A porcelain fuse unit with base in the existing LT panel box ,inter earthing, inter connections and painting with 2 coats of finishing paints etc. as required.

Supplying, Installation, Testing and Commissioning of 01 No. 3 HP (2.2KW) 3- phase, 415 Volts, Kirloskar make Monoblock Pump model KDS 318++ or equivalent having discharge 80mm x 65mm suction and delivery , head - 18 Mtr and discharge 7.5 ltr/sec i/c providing and fixing 3HP (2.24 KW) DOL starter similar to Havells cat No.IHDOAH1*i/c connections etc. ed as per direction of Engineer- in - Charge.

DAYAL HALDER

RAVI RAJ ELECTRICALS