SPECIAL REPAIR TO ROOF TREATMENT OF SHOPPING COMPLEX BLDG NO P118 AND AS AND AS TO KITCHEN JOINERIES TO A7 A8 A9 A10 AND A11 AT SAILORS MARRIED ACCOMMODATION INS RAJALI ARAKKONAM

Amount

Taking up or down 25 or 32 mm steel tubing and connections, including cleaning for refixing or removal to store.

Taking up or down 20 mm steel tubing and connections, including cleaning for refixing or removal to store.

Taking up or down 15 mm steel tubing and connections, including cleaning for refixing or removal to store.

S&F 25mm dia UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe with all fittings complete all as specified and as directed by Engr-in-charge.

S&F 20 mm dia UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe with all fittings complete all as specified and as directed by Engr-in-charge.

S&F 15 mm dia UPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe with all fittings complete all as specified and as directed by Engr-in-charge.

Dismantling water tanks and removing exc 250 to n.exc 500 ltrs capecity.

Dismantling water tanks and removing exc 500 to n.exc 1000 ltrs capecity.

S & F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Part I

S & F 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR Part I

S&F in repair 25mm Nipple suitable for HDPE water tank.(Minimum weight 25mm- 65gms)

Supply and fix in repair for 25mm dia bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixedcomplete all as specified and as directed by Engr-in-charge.

S & F in repair 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-charge.

Demolition of cement Concrete in floors and pavings n exc 15 cm thickness (below or above ground level)

M & L for Cutting out cracks to V section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete al as specified and directed

Screed bed or bedding layer of mortar 5 mm thick for laying floor finishes with Water Proofing Compounds in CM 1:3 ( WPC will be measured and paid separately) complete al as specified and directed

M & L for APP based polymeric membrane minimum weighing 3kg/sqm and minium 3mm thick reinforced with polyester non woven fabric (weight not less than 150 gms/ sqm) laid on primed surfaces with industrial bitumen 85/25, @ 1.20 Kg/Sqm over bitumen primer @ 0.5 litre/Sq.m. by gas flame torch application and cleaning surfaces, applying evenly a tack coat/primer of industrial bitumen 85/25 grade at the rate of 1.20kg/sqm over APP membrane complete all as specified and as directed by Engr-in-charge.

M & L for 2 coats Aluminium paint over Water Proofing Treatment complete all as specified and directed by Engineer in charge

M & L for plain cement concrete type B2 1:2:4 (using 20 mm graded aggregate) Cement concrete in foundations, filling and mass concrete, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars, posts etc...complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete al as specified

M &L 50mm thick Cement Concrete type C-1, 1:3:6 (20mm graded aggregate) as in floors

Disconnecting existing tanks (capacity exc 500 litre n exc 1000 litre), setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

M &L Providing, cement concrete type C-1, 1:3:6 (20mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges

Material and labour for plain cement concrete type D-2, 1:4:8 (Using 40mm graded stone aggregates) as in sub base complete all as specified and as directed by Engr-in-charge.

Material and labour for chequred cement concrete tiles 300x300x20-22mm thick set, jointed and pointed in neat cement slurry with grey pigment cement and pigments over 20mm thick screed bed in CM 1:6 with coloured cement to match the shade of tiles complete all as specified and as directed by Engr-in-charge.

Taking down cement plaster on brick walls including raking out joints, hacking for key, scrubbing down with water, etc.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in two layers 10mm thick in CM 1:4 followed by 5mm thick CM 1:4 with approved WPC, finished even and fair.

M&L Integral waterproofing compound

Material and labour for preparing new surfaces plastered or unplastered and applying two coat of cement based paint white or tinted over a coat of chalk whiting primer on walls complete all as specified and as directed by Engr-in-charge.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq. m each

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

M&L 100m Butt hinges,medium weight, cold rolled mild steel, and fixed

M&L 100mm Extruded aluminium alloy handles, fabricated type, anodised

M&L 100mm Aluminium anodised, barrel tower bolts of extruded section and fixed

M&L 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with cement mortar 1:4 complete all as specified and as directed by Engr-in-charge.

M&L Rendering 10mm thick for laying wall finishes with cement mortar 1:3 complete all as specified and as directed by Engr-in-charge.

M&L for Joint free Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-charge.

M&L for Glazed ceramic coloured tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed by Engr-in-charge.

S&F in repair water closet white vitreous china ware Orissa pattern of size 630x450mm with integral foot rest ‘P’ or ‘S’ trap 100 mm bore front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern and flushing pipe 32 mm dia MS chromium plated) complete all as specified and as directed by Engr-in-charge.

S&F in repairs of vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to trap and drain (or outgoing pipe) and to flushing pipe, antisyphoage pipe incl Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed by Engr-in-charge.

S&F in repairs tubular towel rail brass chromium plated, 20mm dia D type, 60 cm long between flanges complete all as specified and as directed by Engr-in-charge.

S&F in repairs 15mm bore Bib taps, cast copper alloy CP with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engr-in-charge.

S&F in repairs15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-charge.

S&F in repairs 15mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engr-in-charge.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets (10 ltrs) including PVC 32 mm dia, for low cistern complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs health faucet (hand shower) with 1.0metre long tube with wall hook, chromium plated complete all as specified and as directed.

Supply and fix in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc complete all as specified and as directed by Engr-in-charge.

Dismantling and breakingup drain pipes AC /CI /PVC Pipes set in cement mortar 100mm/75mm bore.

S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F 75mm PVC (SWR) bends any radius with access door.

S&F 110mm PVC (SWR) bends any radius with access door.

S&F 75mm PVC (SWR) vent cowl

Material and labour for Complete removal of existing treatment and applying two coat of white wash on walls complete all as specified and as directed by Engr-in-charge.

Material and labour for Complete removal of existing treatment and applying two coat of white wash on ceiling complete all as specified and as directed by Engr-in-charge.

Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and as directed.

Supply and fix powder coated anodised sliding/hung type aluminium door, window and ventilator shutters (minimum thickness of powder coating 50 micron), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2Nos) suitable handle (1 No), aluminium tower bolt 100 mm (1No) etc. complete all as specified and as directed

S&F 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

Supply and fix for powder coated anodised aluminium grill of 8x 8mm bars size of opening 10cms size mesh with aluminium channel 'F' angle 20x 15mm aluminium frame work complete all as specified and as directed

M&L for complete removal of existing treatment from old decorated plastered surfaces by Vacuum based sanding machine, removal of nails etc & filling cracks/hole with putty and applying wall care putty upto 1mm thick as required (Multipurpose mixer shall be used for uniform and propper mixing of putty) and applying two coats of Acrylic emulsion exterior weather coat white/coloured over a coat of exterior water proof primer by auto roller for upto G+6 storey bldg as per site requirement complete all as specified and directed as per manufacturer instruction. Note:1) All work shall be carried out by approved applicator of paint manufacture only. The same shall be approved before carrying out the work from GE. 2) Contractor should submit Auth applicator certificate before execution of work. 3) Contractor should submit warrenty certificate for 5 years from manufacturer. 4) Columns, Beams and Chajja to be painted different colour as per direction of Engr-in-Charge 5) Workers should wear appropriate personal protective equipment.

Taking down chowkats or frames n. exc 1.5 sqm each (without takingoff shutters from the frame) complete all as specified and directed

Providing and fixing factory made UPVC (UnPlasticised PolyVinyl Chloride) openable window one side Glass shutter other side Wiremesh Shutter, Frames made of uPVC Profile Section having profile size of 74MM X 60MM X 56MM having outer wall thickness of 2.30MM (+/- 0.3MM) with 3 box multi-chamber hollow construction. The shutter of casement window shall be made of size 74MM X 50MM X 36MM having outer wall thickness of 2.30MM (+/- 0.3MM) and the fixed mullion of size 72MM x 60MM x36MM having outer wall thickness of 2.30MM (+/- 0.3MM). The shutter will be provided with suitable uPVC beads of size 25MM x 16MM for glazing for the specified/required glass (single). All profiles of frames, sash, and mullion shall be reinforced with galvanised mild steel section of 1.2mm wall thickness, at wherever required. Area not exceeding 1.00 sqm each. Windows has to be provided with Varity of security devise like multipoint lock systems and powder coated handles, SS304 grade Friction Hinge for Anti-Rust feature, Alumium grill with 10mm square/Round bars size of opening 75mm size mesh, compliant with relevant specification. The window shall have 5mm thick single glass. Wiremesh shutter made of upvc profile with dimension 45 x 41, will be fixed with Butt hinge. The mesh will be fixed in the sash with EPDM gasket, the mesh will be SS with 0.28mm dia average width of aperture 1.40mm. complle all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories, making scaffolding, trestles, ladders, cradles, necessary for execution of work and protective measures etc... for a height upto 26 mtr height approximately. (G+5 storey bldg). (Net opening will be measured for payment purpose.)

M&L PCC 1:3:6 type C1 (20mm graded aggregates) as in bed blocks for hold fasts including necessary form works.

Supply and fix 5 mm thick sheet glass,ordinary quality quality on one side fixed in door/windows, n. exc 0.5 Sqm in each pane fixed with stainless steel screws ,beads/glazing with oil putty etc complete all as specified and directed.

Removing building materials etc... to a distance of exc 250 m but n. exc 500 m including loading, unloading and stacking at the destination

Supply of Liquid water proofing compound

M & L for Forming jambs with CM 1:6 etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed.

M & L for Making good under cills or over arches, lintels and bres summers with CM 1:6. including all pinning when necessary, complete all as specified and directed.

SAMYDOSS CONSTRUCTIONS (BID ID -3153768)

R.P.TRADERS (BID ID -3159114)