PERIODICAL SERVICES, REPAIR TO LEAKAGE, SEEPAGE, OVERHEAD TANKS, ROOFING, FALSE CEILING, FLOORING/PLASTERING, TILLING AND OTHER MISC SANITARY ITEMS AT AF STN FARIDABAD UNDER AOR OF GE (AF) FARIDABAD

Amount

Dismantling floor, hearth or wall tiles including cement mortar, concrete bedding and removing rubbish off the premises complete all as specified and directed.

M&L for Ist quality glazed ceramic coloured tiles of size 450mmx300mmx7 mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including rendering 10mm thick in cement mortar (1:4) set and jointed in neat cement paste of honey like consistency and pointed in white or coloured cement to match the shade of tiles ,complete all as specified and directed.

M&L for Ist quality Non-skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sq.m but not exceeding 0.11 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/sqm over and including 15mm thick screed bed in cement mortar (1:6), including pointing in white cement with pigment to match the shade of tiles,complete all as specified and directed.

M&L for Ist quality Non-skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/sqm over and including 15mm thick screed bed in cement mortar (1:6), including pointing in white cement with pigment to match the shade of tiles,complete all as specified and directed.

M&L for Ist quality, fully vitrified, coloured Vitrified tiles of 10mm thick (square/Rectangular), polished area of each tiles n.exc 0.36 Sqm as in floor etc sat and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick cement screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster on brick walls and concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land ,complete all as specified and directed.

M&L for rendering 12 mm thick in cement mortar (1:6) on fair faces of brick works or concrete surfaces , finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick works or concrete surfaces , finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar (1:3) on RCC ceiling surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces mixed with water proofing compound @ 3 % by weight of cement, finished even and smooth without using extra cement, complete all as specified and directed. Note - WPC shall be measured and paid separately.

M&L for preparation of new plastered wall surfaces and applying two coats of cement base paint, complete all as specified and directed.

M&L for Preparation of new plastered surfaces of ceiling,chajja etc, including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying three coats of white wash, complete all as specified and directed.

M&L for Preparation of new plastered or un-plastered wall surfaces of any description and applying two coats of oil bound distemper over a coat of Chalk whitening, complete all as specified and directed.

S&F in repairs stainless steel Plate Rack of best quality, made out of 0.80 mm thick stainless steel sheet of size 90 cm x 60 cm x 25 cm with all internal fittings of appoved make, complete all as specified and directed.

Supply only integral water proofing compound conforming to IS-2645-1975, complete all as specified and directed.

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks, straight or curved on plan not exc 6 m mean radius built in cement mortar (1:6) , complete all as specified and directed.

S&F in repair 20 mm bore ,CPVC medium grade, with all fittings (like Elbow, Tee, Socket, GI pipe connector, nipples, tank adaptor etc) and fixed complete to walls and ceilings or laid in floors or concealed, including taking down old U/S GI tubing complete all as specified and directed.

S&F in repair 15mm dia. Stop valve/ Angle valve, Chromium plated, brass, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repair 15mm dia. Stop valve/ Angle valve, PTMT, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm bore bib taps, chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed., complete all as specified and directed.

S&F in repair bib taps 15mm bore of standard PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and directed.

S&F in repair shower roses, brass, chromium plated with or without swivel joints 125mm size incl fixing to steel pipe complete all as specified and directed.

S&F in repair Wash basins 550x400mm vitreous china (flat back type) any size incl cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe but including waste fittings complete all as specified and directed.

S&F in repair Vitreous china squatting pan Orissa pattern size 580x440 mm white with integral foot rest (exclusive flusing cistern & flush pipe) including cast iron 'P' or 'S' trap of 100 mm bore pipe fixed in PCC 1:2:4 type B-2 and necessary lean concrete, including making good the surface to match with existing floor finish,complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity complete all as specified and directed.

S&F PVC in repair PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair ,15 mm bore, Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S&F in repair ,Vitreous china bowl urinal flat back, size 465X355X265mm (minimum) white , with grating and union for discharge pipe(excluding flushing cistern,flush pipe),but including waste pipe, complete all as specified and directed.

S&F in repair Glass shelf with Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard ,and railing 60 cm long complete all as specified and directed.

S&F in repair, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.

S&F in repair for rotational moulded polyetheylene water storage tanks tripple layered (cylindrical vertical with closed top) of 500 ltr capacity, hoisted and fixed in any position incl 20mm dia ball float valve with aluminium fiting, GI nipple any fitting dismantling exising water tank complete all as specified and directed

Taking down chowkats or frames not exc 1.5 sq.m each but with shutters (without taking off shutters from the frames), complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sq.m but n.exc 4 sq.m each but with shutters (without taking off shutters from the frames), complete all as specified and directed.

Taking down shutters exc 1 Sqm and n exc 2 Sqm each , complete all as specified and directed.

S&F, Factory made, 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commertial type on both sides, fitted to chowkhats of 2nd class hard wood, complete all as specified and directed.

S&F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without shash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and sizes of the members of shutters as specified in clause No . 8.24 (a) of MES schedule part – I (Specifications - 2009), supplied and fitted to chowkhats complete all as specified and directed.

S&F Mild steel framed work such as in doors/chowkhats or gates of angle or other section with gusset plates, rail, braces etc. complete drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with including either hooks and hinges or steel hanging door fittings (exclusive of steek sheeting or other covering, running rails and guides) and hanging, also fastening & fixing and similar work conforming to Fe-290 grade E-165 , complete all as specified and directed by Engineer-in-Charge

S&F 150 mm Aluminium handles, cast type, anodised of extruded section complete all as specified and directed.

S&F 200mm aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F 100mm butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified and directed.

S&F Aluminum alloy, anodized, door bolt with hasp staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed length of bolt 250 mm, bolts not less than 16mm dia with and including a minimum of 6 bolts not,four on bolt plate and two on staple plate complete (ISI marked ) , complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows, complete all as specified and directed.

S&F in repair , Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows, or Stainless steel wire staples all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of prink primer all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillet complete all as specified and directed.

M&L for Providing & fixing false ceiling at all heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of perforated Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 tiles fully mm center to center and 40mm long dry wall wood screws. (WITH SEMI PERFORATED 12MM THICK MICRO TEGULAR EDGED GRG FALSE CEILING TILES)The work shall be carried out as per specifications, drawing and as per directions of the Engineer-inCharge.

S&F 25mm thick lnsulated PVC Wall Lining, consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing, complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as specified and directed.

S&F in repair aluminium(Die cast)body Door closer hydrau lically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed, complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and directed.

S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.), complete all as specified and directed.

S&F 4 mm thick Sheet glass, ordinary quality and glazing in square/rentangle area not exceeding 0.5 sq. m in each pane for aluminium door /window shutter, complete all as specified and directed.

S&F 4.8mm thick Sheet glass, ordinary quality and glazing in square/rentangle area exceeding 0.5 sq. m in each pane for aluminium door /window shutter, complete all as specified and directed.

S&F 12 mm thick Pre-laminated, interior grade, both side laminated board, decorative choice lamination fixed with screws to timber frame work /aluminium frame complete all as specified and directed.

Dewatering, cleaning & removal of all scales & dirt etc, from PVC tanks, capacity 500 & 1000 Ltrs by using following steps :- (a) Dewatering & cleaning with mechanized process. (b) Scrubing all internal surface of tank by steel wool with using specialized solution like swipe pro or equivalent to remove all scale and dirt. (c) Clean all scales & dirt by using vacume cleaner. (d) Finally clean the tank and mouth of circulating pipes etc with clean water. (e) Marking with white paint on tank ‘Date of cleaning the tank ’, complete all as specified and directed.

S&F PVC tank lid (cover) suitable for 500 litres capacity water tank with hinged and hooked fixing by steel screw for existing PVC water tank on buildings, fixed in repair, complete all as specified and directed.

S&F PVC tank lid (cover) suitable for 1000 litres capacity water tank with hinged and hooked fixing by steel screw for existing PVC water tank on buildings, fixed in repair, complete all as specified and directed.

S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) complete all as specified and directed.

S&F in repair Plastic water closet seat white closed pattern with flat bottom and over and mild steel chromium plated or aluminized hinging device, complete all as specified and directed.

Taking down existing water proofing treament any nos of layers and of any description, incl.demolition and taking off PCC padding/plaster on RCC slab, also including removing of bitumen coating to show the concrete surface to its true colour and roughening etc and also removing the debris outside the MOD land complete all as specified and directed.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry (1:3) including matching existing surfaces complete all as specified and directed.

M&L for Plain Cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) on roof padding, average thickness of 40 mm in slope, finished even and fair, complete all as specified and directed.

M&L for 15 mm thick Screed bed in cement mortar (1:3) mixed with integral water proofing compound as per manufacturers instruction, complete all as specified and directed. Note:- Water proofing compound measured and paid separately.

M&L for laying APP modified membarane with non woven polyester reinforcement mat (concrete core) not less than 3mm thick & not less than 3.5 kg /sqm, the membrane tourched with overlap of minimum 100 mm on length side & 100 mm on width side over a tack coat of Industrial bitumen of 1.20 kg / Sqm over Bituminious based primer IS No. 3383@ 250 gms/sqm including apply a coat Aluminium paint @ 200 gms/sqm as per manufacture's instruction, complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grained printed colour Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing. (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed.

Demolition of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed.

M&L for Granite 20 mm thick (of any type ) (table runned and polished ) in floors steps , jambs, pillars,window-cills,cooking plateforms and vertical surfaces bedded and jointed with grey cement slurry and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

S&F in repair PVC door seal / snake guard including accessories items, nails, screw etc, complete all as specified and directed.

M&L for Welding in repairs n.exc.6mm thick of metal to be welded n.exc 2.5 cm in length complete all as specified and directed.

NOTE FOR ALL PAINITNG AND WATER PROOFING ITEMS :- The following precautionary measures shall be ensured by the contractor before and during execution of the work :- (i) All the painting works shall be got executed through original material manufacturing company or their authorised applicators as approved by GE and contractor should submit MOU with the manufacturing company and their authorised applicator alongwith performence guarentee otherwise recovary of Rs. @ 2000 per week will be made from contractor's dues from the date of commencement of work .Entire work shall be executed with the approved firm. All the material of smart periodical is to be precured only from approved firm and as mentioned against each item and application of materials to wall / ceiling surfaces to be done through smart automatic machines only. (ii) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (iii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers. (iv) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery.

NOTE FOR ALL PAINITNG AND WATER PROOFING ITEMS :- Contd.../- (v) Recovary @ cost of material shall be done from contractor if any material found lying on site after completion of work as per manufacturer's instruction and quality satisfaction of Engineer-in-Charge. (vi) The work shall be executed upto 15mtr height and cost of suitable scaffolding shall be deemed to be included in quoted rates by the tenderer. (vii) Smart periodical work to be executed in sequential stages and all the stages to be got approved from GE / Engineer-in-Charge. Stage passing register duly signed to be kept in record. (viii) The work will be carried out in following steps as appended below :-

Material & labour for complete removal of old existing treatment of wall (External / internal) and ceiling finishes using mechanical dry wall sander machine (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 320 Grit or above to completely remove old existing treatment for wall and ceiling surface and ready to take new surface finishes complete as specified and as directed

M&L for rendering 15 mm thick using ready mix plaster on brick / concrete surface of external walls finished fair and even, complete all as specified and directed. Make : Ultratech, Readyplast, Birla Acrocem & Trimurti. Note :- Contractor is required to deposit readymix bags for 100% CA quantity to Engr -in-Charge within 15 days of issue to WO-1.

M&L for applying waterproof cement based putty @ 0.5 Kg (undiluted) per sq mtr. of average thickness 1.5mm in two coats on prepared wall (External/internal) surfaces in following steps:- Step-1) Filling cracks in wall using crack seal compound Asian smart care crack seal or equivalent. Step 2) Mix the putty powder @ 0.5 kg/sqm by adding 35 to 40% water by volume or as per approved manufacturer's instructions and mix it with electric putty mixer with the mixing capacity of min 2.5 kg putty per minute upto 5 to 10 minutes. Step 3) Apply the first coat of the prepared mix with the help of fully automatic airless sprayer machine i.e. TruCare Graco Ultramax II 490 PC Pro or equivalent as approved by GE for putty application having flow speed of max 2.04 ltrs per minutes with a maximum pressure 3300 PSI with bottom to top configuration. Step 4) Allow 6-8 hrs to dry putty surface. Step-5) Apply the second coat of the prepared mix with the help of fully automatic airless sprayer machine i.e. TruCare Graco Ultramax II 490 PC Pro or equivalent approved by GE for putty application having flow speed of max 2.04 ltrs per minutes with a maximum pressure 3300 PSI with horizontal configuration. Step-6) Allow 6-8 hrs to dry putty surface then prepare the surface by electronic wall sander machine to apply subsequent coats of primer, complete all as specified and as directed. Note : Primer shall be measured and paid saperately under relevant item. Make : Berger Homeshield waterproof putty, Asian Truecare acrylic wall putty, Nerolac Perma waterproof putty, Dulux aquatech waterproof putty.

M&L for applying one coat of acrylic water based interior grade primer @ 0.7 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) or as per approved manufacturer's instructions to be applied with fully automatic airless sprayer machine i.e. TruCare Graco Ultramax II 490 PC Pro or equivalent as approved by GE for paint application with a flow speed of min 2.0 ltr per minute having a pressure of 3300 PSI on prepared and wall (External ) surfaces as per above item, Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

Material & labour for applying one coat of acrylic water based Exterior grade primer @ 0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) as per approved manufacturer's instructions to be applied with fully automatic airless sprayer machine i.e. TruCare Graco Ultramax II 490 PC Pro or equivalent as approved by GE for paint application with a flow speed of min 2.0 ltr per minute having a pressure of 3300 PSI on prepared and wall (External ) surfaces as per above item, Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

Material & labour for applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint @ 0.2 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) of approved tint as per approved manufacturer's instruction over prepared and primed surface of external wall with fully automatic airless sprayer machine i.e. TruCare Graco Ultramax II 490 PC Pro or equivalent as approved by GE for paint application with a flow speed of min 2.0 ltr per minute having a pressure of 3300 PSI as per above item, Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed.

Material & labour for applying with fully automatic airless spray machine TruCare Graco Ultramax II 490 PC Pro or equivalent of paint application with a flow speed of min 2.04 ltr per minute having a pressure of 3300 PSI of paint application with a flow speed of 2 ltr per minute having pressure of 3300 PSI two coats of high-sheen, anti- fungle , anti bacterial, low-VOC & highly washable luxury emulsion paint with @ 0.8 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) or as per manufacturer's instruction taflon surface protector of shade as approved complete all as specified and as directed .

M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed .

M&L for preparation of old surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying one coat of synthetic enamel paint, complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

S&F in repair 3mm thick plain sheet glass, ordinary quality and glazing with oil putty in square/rectangle n.exc 0.5 sq. m in each pane complete all as specified and directed.

S&F in repair 3mm thick sheet glass frosted on one side , ordinary quality and glazing with oil putty in square/rectangle n exc 0.5 sq. m in each pane complete all as specified and directed.

Material & labour for preparing old surface of eaves gutter and pipes any description, n. exc 60 cm girth including holderbats, distance pieces, etc. (length measured over bends, branches etc.) and applying one coat of synthetic enamel paint complete all as specified and directed.

Material & labour 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, including finishing surface of concrete topping even and rough as in screed bed complete all as specified and as directed.

M&L for writing letters, figures & digits (Block. Roman, Italic or Indian) building Nos 25 centemeter height with black background and white letters as approved by Engineer-In- Charge, complete all as specified and directed.

M&L for writing stops, commas, short lines, dashes, hyphens, brackets, etc. complete all as specified and as directed.

laxmi enterprises (BID ID -3302758)

MAA BHAWANI CONSTRUCTION (BID ID -3302370)

S.R. Constructions (BID ID -3307795)

Singh Associates (BID ID -3308050)