Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.6 LAccepted-AOC | L1 | Accepted-AOC Being lowest bid | |
| 2 | L2₹26.7 L+₹5.1 L (23.8%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹27.7 L+₹6.1 L (28.1%)Rejected-Finance 21 JHAMRI 151 JHAMRI JHAMRI ROHTAK HARYANA 124142 UDYAM HR 07 0030314 | JHAJJAR | HARYANA | 124142 | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹28.4 L+₹6.8 L (31.6%)Rejected-Finance NEW JAIL ROAD UDHAMPUR 182101 J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L4 | Rejected-Finance Being other than lowest | |
| 5 | L5₹30.0 L+₹8.4 L (38.8%)Rejected-Finance | L5 | Rejected-Finance Being other than lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
3 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE North Udhampur
GE (North) Udhampur PIN 182101 C/O 56 APO
REPAIR / REPLACEMENT OF CERTAIN B/R AND E/M ITEMS AT JNE AND ADJOINING AREA UNDER AGE B/R-II OF GE (NORTH) UDHAMPUR
2024_MES_662435_1
GE/U(N)-46/2024-25
Open Tender
Civil Works
Item Rate
180 days
GE North Udhampur
Please refer tender documents
7 documents required · 7 mandatory
₹500
GE North Udhampur
₹80,000
Yes
22 Nov 2024
27 Jun 2024
5 Sept 2024
27 Jun 2024
3 Sept 2024
12 Jul 2024
28 Jun 2024 - 4 Jul 2024
Amount
Dismantling floor, hearth or wall tiles including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
M&L for 7-8mm thick non skid coloured ceramic tiles, area of each tile exc. 0.11 Sqm but not exc 0.18 Sqm, laid in floor over and including 15mm thick screed bed or bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.
M&L for 10mm thick vitrified ceramic tiles of any colour (Square or rectangular), polished, area of each tile not exc 0.36 Sqm, laid in floors over and including 15mm thick screed bed or bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm or 350mm x 250mm x 7mm thick as on verticle surfaces, fixed on wall or verticle surfaces over and including 10mm thick plaster/ backing coat in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.
M&L for machine cut kota stone slab flooring, 18-20mm thick, as in flooring, steps, skirtings etc. over and including 20mm thick screed bed or bedding ayer in CM 1:4, alid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.
All as per Srl item No. 5.00 above but as on skirting or walls, fixed over and including 10mm thick in CM 1:4, complete all as specified and directed.
M&L for 18 to 20mm thick granite (of any type) tiles, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing, laid over and including 20mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed.
Rounding / moulding to edge (half round) of stone (kota/ marble/ granite) of any description including rubbing and polishing, complete all as specified and directed.
Taking down cement plaster on brick walls, stone masonry, concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.
M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for 5mm thick rendering in CM 1:3 as on ceiling, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection, finished the surface even and smooth with using extra cement, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames), area not exceeding 1.50 Sqm each and making good disturbed surface to match with existing surface, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames), area exceeding 1.50 Sqm but not exceeding 4.0 Sqm each and making good disturbed surface to match with existing surface, complete all as specified and directed.
Taking down shutters from the frames exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.
S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. (thickness of sheet shall be 1.25mm) and making good disturbed surface to match with existing surface, complete all as specified and directed.
S&F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. (thickness of sheet shall be 1.25mm) and making good disturbed surface to match with existing surface, complete all as specified and directed.
S&F factory made 2nd class hard wood 35mm thick plain framed, panelled shutters (two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed.
S&F factory made flush shutters, 30mm thick, solid core construction with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
All as per Srl item No. 20.00 above but glazed and skeleton shutter with sash bar for glass/ wire gauge, complete all as specified and directed.
M&L for plain cement concrete 1:3:6, type C-0 (using 12.5mm graded crushed stone aggregates) as filling in the pressed steel door frame/ hold fast/ back in chowkats, complete all as specified and directed.
S&F aluminium anodised barrel tower bolts, 150mm long of extruded section, complete all as specified and directed.
S&F 300mm long aluminum alloy, anodised, sliding door bolt with hasp staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy, complete all as specified and directed.
S&F alunminium handle, cast type, 150mm long, oval type, complete all as specified and directed.
M&L for preparation of new wooden surfaces or wooden articles, exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
M&L for preparation of new steel or iron surfaces of any description, exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
S&F in replacement vitreous china wash down water closet (pedestal pattern), snow white, suitable for P or S trap complete including connection to drain pipe and to flushing pipe antisyphonage pipe etc., complete all as specified and directed.
S&F in replacement vitreous china squatting pan ‘Orissa’ pattern of size 580mm x 440mm, white, with integral foot rest (excluding flushing system and flush pipe) with ‘P’ or ‘S’ trap, complete all as specified and directed.
S&F in replacement PVC low level flushing cistern of 10 ltrs capacity with top push button inclusive of brackets and PVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve float and handle and including PVC connection of size 15mm & 450mm long, complete all as specified and directed.
Demolition of brick work or stone boulder masonry, built in cement mortor including all quoins, arches, pillars etc., complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 mtr mean radius, build in CM 1.6, complete all as specified and directed.
M&L for half brick work with sub Class 'B' bricks, old size, straight or curved on plan, built in CM 1:4, complete all as specified and directed.
S&F in replacement viterous china wash hand basin, pedestral type, white, flat back, size 550mm x 400mm including CP waste couping of 32mm dia, chain, plug and porcelan stopper and CI brackets of angle iron 65mmx65mmx6mm including embedded in PCC block with PCC 1:2:4 type B-1 and including PVC waste pipe of suitable size, complete all as specified and directed.
S&F in replacement pillar tap, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down, high pressure with or without lettered Hot or Cold, with long screwed shanks and fly nuts, screwed of 15mm bore iron pipe, complete all as specified and directed.
S&F in replacement PVC connection of size 15mm with PTMT nuts of length 450mm, complete all as specified and directed.
S&F in replacement aluminium tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges, complete all as specified and directed.
M&L for preparation and complete removal of existing treatment of old decorated surfaces of wall and applying two coats of oil emulsion paint over and including a coat of 1mm thick wall care putty, complete all as specified and directed.
M&L Prepration of new decorated surfaces and applying two coats of Distemper oil emulsion on walls over a coat of 1mm wall care putty including complete removal of existimg treatmenta complete all as specified and directed.
M&L for preparation of surfaces and applying three coats of white wash on ceiling of any description, complete all as specified and directed.
M&L for preparation of new surfaces of wall and applying two coats of cement base paint over and including a coat of alkali resistant primer, complete all as specified and directed.
Taking up or down GI tubing 15mm bore including cleaning for re-fixing or removal to store, complete all as specified and directed.
Taking up or down GI tubing 20mm bore including cleaning for re-fixing or removal to store, complete all as specified and directed.
Taking up or down GI tubing 25mm bore including cleaning for re-fixing or removal to store, complete all as specified and directed.
S&F 15mm bore GI tubing, medium grade with all fitting and fixtures, fixed to walls or ceilings or laid in floors, complete all as specified and directed.
Re-fixing of 15mm bore GI water tubing, medium grade with and including all fittings and fixed to walls and ceiling or laid in floors, complete all as specified and directed.
S&F 20mm bore GI tubing, medium grade with all fitting and fixtures, fixed to walls or ceilings or laid in floors, complete all as specified and directed.
S&F 25mm bore GI tubing, medium grade with all fitting and fixtures, fixed to walls or ceilings or laid in floors, complete all as specified and directed.
S&F in replacement 15mm bore stop valve, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.
S&F in replacement 15mm bore bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
S&F in replacement 32mm dia waste coupling of PTMT (half or full threaded), minimum 45gms, complete all as specified and directed.
S&F in replacement PVC connection of size 15mm with PTMT nuts of length 600mm, complete all as specified and directed.
S&F 500 ltrs capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), white colour, three layered, ISI Marked, hoisted and fixed in position including taking down old one and removing from site, complete all as specified and directed.
S&F 1000 ltrs capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), white colour, three layered, ISI Marked, hoisted and fixed in position including taking down old one and removing from site, complete all as specified and directed.
S&F ball brass valve, high pressure, with polythene float and flynut complete, screwed for 20mm bore iron pipe or brass ferrule, complete all as specified and directed.
Demolition of concrete of any description and in any position, not otherwise specifically provided, complete all as specified and directed.
M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in floor or sub base of floor, complete all as specified and directed.
M&L for 40mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in floor or sub base of floor, complete all as specified and directed.
M&L for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in floor or leveling course, complete all as specified and directed.
M&L for machine pressed cement concrete interlocking paver block, glossy finish, any shape and size, confirming to IS:15658-2006 of 60mm thickness, M-35 grade, laid with grey cement and pigment, complete all as specified and directed.
M&L for 25mm thick sand cushioning as in under floors/ paver block including spreading, leveling, watering if required, complete all as specified and directed.
M&L for chequred cement concrete tile of size 20cm x 20cm x 25mm thick, machine pressed, set and jointed in neat cement slurry, laid in floors over and including 15mm thick screed bed or bedding layer CM 1:4 and joints fiil up with white grey cement and pigment to match the shade of tiles, complete all as specified and directed.
S&F aluminium extruded section hydraulically door closer, regulated designation No. 1, universal type, suitable for door shutter upto 700mm in width and of weight not more than 35 KG, complete all as specified and directed.
S&F in replacement wash hand basin, vitreous china flat back of size 580mm x 450mm (excluding CP pillar tap) and including 32mm size waste coupling, 15mm size 450mm long PVC connection, 32mm sdia PVC waste pipe and angle brackets of size 30mm x 30mm with length 450mm, complete all as specified and directed.
S&F in replacement towel Ring of PTMT, fixed with and including chromium plated brass screws and wooden/ plastic cleats (Minimum weight 90 Gms), complete all as specified and directed.
S&F in replacement vitreous china urinal bowl, flat back of size of 465mm x 355mm x 265mm, white in colour with grating and union for discharge pipe (excluding flushing cistern) including waste fittings, complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position, not otherwise specifically provided for, complete all as specified and directed.
M&L for RCC (Nominal Mix) 1:2:4, type B-1 (using 20mm graded stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5 mtr clear span, complete all as specified and directed.
M&L for RCC (Nominal Mix) 1:2:4, type B-1 (using 20mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like, complete all as specified and directed.
Formwork to rough finished concrete surfaces and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.
Formwork to rough finished edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide, complete all as specified and directed.
S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
S&F TMT Mild steel bars 6-8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm, complete all as specified and directed.
S&F steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded including one shop coat of zinc chrome primer, complete all as specified and directed.
S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars including one shop coat of zinc chrome primer, dovetailed or welded, complete all as specified and directed.
S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.
S&F powder coated (colour approved by GE) aluminium (minimum thickness of powder coated 50 micron) as in sliding shutter of windows, ventilators openable/ louvers, fixed/ sliding type without sash bars, aluminium section not less than 0.55 Kg/m including nessery jointing cleats, glazing clips, rubber neoprene packing, aluminium snap beading,screws, rolling for smooth moving and locking arrangement etc, fixed to wall including preparation of disturbed portion both side (internal & external surfaces of wall) to match with existing surface treatment and all sides of aluminium frame shall be sealed with silicon sealent (inner/ outer face), complete all as specified as directed.
S&F aluminium deco grill of 5 to 6mm dia, size of mesh not exe 7.5cm in either direction including anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15 of approved design/ pattern with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete as per site requirement and directed by Engineer-in-Charge.
S&F 30mm thick factory made PVC door shutter consisting of panel of hollow PVC profile of 24mm thickness, consisting of frame made out of MS tubes of 19 gauge thickness and size of 19mm x 19mm inserted inside the hollow section of stiles, top and bottom rails and two 19mm x 19mm MS tubes inserted horizontally inside the hollow profile section at an equal distance from top and bottom of door and fixed with hollow profile section using 3mm thick Prelam PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mm x 2) thick x 24mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etc, complete as per manufacturer's specification and directed by Engineer-in-Charge.
S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, fixed in opening at site, complete all as specified and directed.
S&F double action floor spring hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass and other parts made of mild steel, heavy duty, complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/ slabs/ blankets, any thickness including cover fillets, complete all as specified and directed.
S&F 4mm thick non asbestos fibre cement board, panel size 605mm x 605mm as in designed ceiling, conforming to IS-14862, type 'B' category and including snap grid frame work, hold fast, suspenders, complete all as specified and directed.
S&F 4mm thick non asbestos fibre cement building boards, fixed or laid/ inserted to timber/ GI/ Aluminium framework with screws, complete all as specified and directed.
Hacking out old broken glass of any thickness, size and quality, from wooden frame or steel frame, glazed with putty or fixed with beads, complete all as specified and directed.
S&F 4.0mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed.
S&F 4.0mm thick figured glass, pin head type and glazing with oil putty in square in not exc 0.50 Sqm in each pane, complete all as specified and directed.
Dismantling of CGI / AC and others sheet of any description including ridges, complete all as specified and directed.
S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of thickness 0.50mm of any colour, having tensile strength of 550 Mpa as in roof covering/ cladding to wall and fixed with self tapping screws, complete all as specified and directed.
S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet of thickness 0.50mm of an colour, having tensile strength of 550 Mpa as in roof covering, cladding to wall, ridges, hips, valley gutters etc. and fixed with self tapping screws, complete all as specified and directed.
S&F in replacement 110mm bore PVC (SWR) pipe in any length with rubber ring joints, fixed to walls with MS clamps of suitable size, fixed at any height, complete all as specified and directed.
S&F in replacement 75mm bore PVC (SWR) pipe in any length with rubber ring joints, fixed to walls with MS clamps of suitable size, fixed at any height, complete all as specified and directed.
Dismantling of boarding of any description, fixed in any position with nails, complete all as specified and directed.
S&F solid PVC wall lining (Wall Panelling) consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame, complete all as specified and directed.
Demolition of cement concrete (un-reinforced) as in sunken portion of WC, removing all loose particle alogwith exiting water proofing treatment, cleaning by wire mess/ brushes to removing all dirt and other materials and also cleaning the surface with water, complete all as specified and directed.
M&L for water proofing treatment to sunken portion of WC, bathroom etc. by applying first layer of slurry of cement @ 0.488 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sqm this layer allowed to air cure for 4 hours then applying slurry of cement @ 0.242 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @0.126 Kg/Sqm and allowed to aircure for 4 hours and joints seal with sealing compound as approved by GE, complete all as specified and directed. Note :- Before laying of lime concrete joints of trap/ WC/ soil pipes shall be properly sealed with sealing compound of Roofex/ Forre/ FOSROC and provn of 'P' or 'S' trap/ Nahani / floor traps with long arm.
M&L for 15mm thick rendering in CM 1:3 on fair faces of brick work or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for plain cement concrete 1:5:10 type E-2 (using 40mm graded crushed stone aggregates) as in sunken portion treatment, complete all as specified and directed.
Demolition of cement concrete (un-reinforced) as in roofs of existing water proofing treatment of any type and any thickness, complete all as specified and directed.
M&L for roughing surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc. for local depressions RCC surface and brushing neat cement slurry with 3.0 Kg of cement Per Sqm, complete all as specified and directed.
M&L and applying bituminous primer confiriming to IS-3384 @ 0.40 Kg/Sqm on prepared surface on sunny day. After the primed surface has dried and apply a coat of hot blown 85/25 penetration grade blown bitumen, confirming to IS-702@ 1.20 Kg/Sqm on the surfaces. Provide APP (Atactiic Polypropylene) modified polymeric five layered membrane with central core of 100 micron high molecular high density firm. Minimum weight of membrance will be 3 Kg/Sqm. APP membrance will be laid across the slope from lowest line sloping roof towards ridge with minimum end lap of 150mm & side lap of 75mm bonded with hot blown bitumen. Over the APP membrance apply semi hot blown 85/25 penetration grade bitumen @ 1.20 Kg/Sqm and blinded with fine sand in dry condition @ 0.50 Kg/Sqm dusted over the bitumen coat, complete all as specified and directed Note :- The laying of the membrane shall be got done by authorized applicator of the membrane manufacturer.
M&L for 15mm thick cement plaster in CM 1:3 with and including mixing of water proofing compound as on accessable roof/ non accessable roof surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed.
S&F in replacement health faucet, brass, chromium plated with 1000mm long, 8mm dia chrome finish flexible pipe with wall hook, complete all as specified and directed. Make :- Jaquar Cat Part No. ALD-573 / Cera Cat Part No. F 8030103 or equivalent make as listed in Appendix 'G'.
S&F in replacement jet spray, brass, chromium plated, heavy duty including flexible pipe suitable for 15mm bore water connection for EWC, complete all as specified and directed.
S&F in replacement soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs with brass chromium plated screws, complete all as specified and directed.
S&F in replacement 32mm bore of trap, brass chromium plated bottle traps for wash basins with inlet and outlet, screwed for pipe or connections including necessary packing, union and cap, complete all as specified and directed.
S&F in replacement shower rose, brass, chromium plated, 125mm dia with or without swivel joint, with and including CP brass arm and wall flange, fixing to iron pipe or union, complete all as specified and directed.
S&F in replacement glass shelf assembly, consisting of 5.5mm thick sheet glass shelf, 12cm wide with chromium plated brackets, guard and railing 60cm long, complete all as specified and directed.
S&F in replacement centre hole mixer for mixing Hot & Cold water for wash hand basin, cast copper alloy with dual capstan heads, chromium plated, screwed down, high pressure with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore iron pipe, complete all as specified and directed.
S&F in replacement sink wall mixer, brass, chromium plated, fancy type with capstan head handles, screwed down, high pressure with lettered 'hot' and 'cold' including CP brass wall flanges and necessary extension nipples, screwed for 15mm bore iron pipe, complete all as specified and directed.
S&F in replacement sink with drainage board, made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and including waste coupling and waste pipe and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm, complete all as specified and directed.
M&L for 18/19mm thick prelaminated particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, complete all as specified and directed.
S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised width of flap 30mm, complete all as specified and directed.
S&F hasp and staple, 100mm size, mild steel, safety type, stove enalmelled black including bolt to hinge plate and fixed with screws, complete all as specified and directed.
S&F 100mm long mild steel butt hinge, medium weight, cold rolled, complete all as specified and directed.
Taking down carefully point wiring copper/ aluminium (light, fan, socket and power) complete including fittings such as switches, ceiling roses, pendent regulators, sockets etc and removing materials to store for keeping of safe custody or credit to contractor and making good the disturbed surfaces to match with existing surfaces, complete all as specified and directed. Note :- Fittings shall be measured and paid separately under respective items of BOQ.
Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as LED bulk head fittings, tube light fittings etc. reuse at site or carrying to the store (to be measured only when found serviceable in all respects complete for reuse), complete all as specified and directed.
Taking down old serviceable/ unserviceable MCB DB of any type and size etc. after disconnecting (serviceable DBs /MCBs shall be re-use), complete all as specified and directed.
M&L for point wiring for one light point, controlled by one one way switch 5 Amp with 1.5 Sqmm single core multistanded copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including continuos earth wire with cable of size 1.5 Sqmm copper conductor flexible FRLS insulated drawn into and including concealed PVC rigid conduit of not less than 20mm dia and 1.5mm wall thickness, ISI marked terminated into annealed steel terminal boxes with and including 3mm thick hylam brand IS-2036 marked laminated sheet cover for mounting switches, sockets, fan regulators etc, complete all as specified and directed.
M&L for point wiring with 1.5 Sqmm PVC insulated unsheathed FRLS multistranded copper conductor, medium grade, ISI Marked, drwan into and including PVC concealed conduit with all accessories from terminal box to junction of ceiling and wall and rest of circuit conductor wire drwan into and including suraface PVC rigid non metalic conduit for one ceiling fan point, controlled by one switch with and including 1.5 Sqmm continuos earth wire, connected to common earth dolly, complete all as specified and directed.
All as per Srl item No. 122.00 above but for bell/ buzzer on independent board, controlled by one push button bell switch, omplete all as specified and directed.
All as per Srl item No. 122.00 above but for 3 Pin socket outlet, 5 Amps on same board, complete all as specified and directed.
All as per Srl item No. 122.00 above but for one 5 Amps socket outlet on independent board, complete all as specified and directed.
All as per Srl item No. 122.00 above but for wire of size 2 x 2.5 Sqmm to controlled the 3 Pin, 5/15 Amps socket outlet on independent board and providing earth continuity wire using PVC insulated, FRLS 1100 volts grade unsheathed single core stranded copper conductor cable of size 2.5 Sqmm, complete all as specified and directed.
All as per Srl item No. 122.00 above but controlled by 2 Nos of two way switch, complete all as specified and directed.
S&F in replacement switch socket combination 2 in 1, 3 pin, 6 and 16 Amp, flush type universal, complete all as specified and directed.
S&F in replacement socket outlet, 2 in 1, 3/5 pin, 5 Amps, flush type, complete all as specified and directed.
S&F in replacement socket outlet, 2 in 1, 3/5 pin, 10 & 20 Amps, flush type, complete all as specified and directed.
S&F in replacement ceiling rose, 3 terminal, PVC/ polycarbonate isolated body, complete all as specified and directed.
S&F in replacement in relacement bell, ding dong type, AC, 230/250 Volts, single pole, complete all as specified and directed.
S&F in replacement switch piano flush type bell push, 5 Amps, complete all as specified and directed.
S&F in replacement electronic type fan regulator, stepped type, 240 Volts, flush type, suitable for 1200/1400mm sweep ceiling fan, ISI marked, complete all as specified and directed.
Taking down fan, ceiling cable end, dismantling blades and kept in safe custody for refixing on same location, complete all as specified and directed.
Hanging / fixing only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan, complete all as specified and directed.
S&F in replacement switch piano, flush type, single pole, two way, fixed independent, complete all as specified and directed.
S&F in replacement switch piano, flush type, single pole, one way, complete all as specified and directed.
S&F in replacement switch socket combination, piano type, 5 Pin, 5 Amps, flush type, complete all as specified and directed.
S&F in replacement switch socket combination, piano type, 6 Pin, 16 Amps, flush type, complete all as specified and directed.
Fixing only LED tube light fittings of 5/12/20 Watt, panels lights, bulk head fittings, complete all as specified and directed.
S&F in replacement LED light fitting with high output diffuser, 1 feet, 5 Watt, 220/230 Volts, AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.
S&F in replacement LED light fitting with high output diffuser, 2 feet, 10/12 Watt, 220/230 Volts, AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.
S&F in replacement 20 Watt LED light fitting, 220/230 Volts, AC, decorative box type with driver holder including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.
S&F in replacement LED 9/10 Watt LED bulk head (6500K) light fitting, surface mounting type, extruded aluminium body with diffuser complete with testing, complete all as specified and directed.
S&F in replacement decorative wall light fixture, made up of polycarbonate, suitable for 9 Watt LED (B-22 base), complete with LED, complete all as specified and directed.
M&L for submain wiring with two run single core 4.0 Sqmm FRLS copper conductor cable PVC insulated, 1100 V grade including 25mm dia in PVC concealed conduit / PVC casing & caping, medium grade, ISI Marked with all accessories such as Tees, elbows, junction boxes etc. as required, fixed on wall alongwith one run of 4.0 Sqmm single core FRLS PVC insulated unsheathed copper conductor cable as continious earth wire and connecting to existing main switch board / distribution board complete including taking down unserviceable submain of any type and size and testing on completion, complete all as specified and directed. Note : Two run of 4.0 Sqmm and one run 4.0 Sqmm cable and one run of PVC conduit or PVC casing and capiing shall be measured as one unit.
M&L for submain wiring with two run single core 6.0 Sqmm FRLS copper conductor cable PVC insulated, 1100 V grade including 25mm dia in PVC concealed conduit / PVC casing & caping, medium grade, ISI Marked with all accessories such as Tees, elbows, junction boxes etc. as required, fixed on wall alongwith one run of 6.0 Sqmm single core FRLS PVC insulated unsheathed copper conductor cable as continious earth wire and connecting to existing main switch board / distribution board complete including taking down unserviceable submain of any type and size and testing on completion, complete all as specified and directed. Note : Two run of 6.0 Sqmm and one run 6.0 Sqmm cable and one run of PVC conduit or PVC casing and capiing shall be measured as one unit.
M&L for submain wiring with two run single core 1.5 Sqmm FRLS copper conductor cable PVC insulated, 1100 V grade including 25mm dia in PVC concealed conduit / PVC casing & caping, medium grade, ISI Marked with all accessories such as Tees, elbows, junction boxes etc. as required, fixed on wall alongwith one run of 1.5 Sqmm single core FRLS PVC insulated unsheathed copper conductor cable as continious earth wire and connecting to existing main switch board / distribution board complete including taking down unserviceable submain of any type and size and testing on completion, complete all as specified and directed. Note : Two run of 1.5 Sqmm and one run 1.5 Sqmm cable and one run of PVC conduit or PVC casing and capiing shall be measured as one unit.
M&L for submain wiring with two run single core 2.5 Sqmm FRLS copper conductor cable PVC insulated, 1100 V grade including 25mm dia in PVC concealed conduit / PVC casing & caping, medium grade, ISI Marked with all accessories such as Tees, elbows, junction boxes etc. as required, fixed on wall alongwith one run of 2.5 Sqmm single core FRLS PVC insulated unsheathed copper conductor cable as continious earth wire and connecting to existing main switch board / distribution board complete including taking down unserviceable submain of any type and size and testing on completion, complete all as specified and directed. Note : Two run of 2.5 Sqmm and one run 2.5 Sqmm cable and one run of PVC conduit or PVC casing and capiing shall be measured as one unit.
Fixing only serviceable MCB DB of any type and capacity, complete all as specified and directed.
S&F in replacement single pole and neutral, sheet steel powder coated distribution board for MCBs, fitted with bus bar, neutral link, earth bar and din rail, suitable for use on 240 Volts, 50 Hz supply, double door 8 Way, complete all as specified and directed.
S&F in replacement single pole and neutral, sheet steel powder coated distribution board for MCBs, fitted with bus bar, neutral link, earth bar and din rail, suitable for use on 240 Volts, 50 Hz supply, double door 12 Way, complete all as specified and directed.
S&F in replacement VTPN MCCB double door distribution board, 4 Way, 415 Volts, IP-43 protection with provision for (MCCB) as incomming and three/ single phase outgoings, complete with insulated bus bar arrangement, fixed flush to wall complete including connections, should be provide with necessary reducer lugs, complete all as specified and directed. Make :- C&S Cat Part No. CSDBMCCB100DD04IP43S / Standard Cat Part No. DSDLVDRBAOFO04 / Indo Asian Cat Part No. 811888.
S&F in replacement thermal magnetic MCCB, 4 Pole, 63 Amps, 415 Volts 16 KA including making necessary arrangements, complete all as specified and directed.
S&F in replacement thermal magnetic MCCB, 4 Pole, 100 Amps, 415 Volts 16 KA including making necessary arrangements, complete all as specified and directed.
S&F in replacement thermal magnetic MCCB, 4 Pole, 125/160 Amps, 415 Volts 16 KA including making necessary arrangements, complete all as specified and directed.
S&F in replacement connection and testing 'C' series, SPN, MCB 40 to 63 Amp, 240 Volts, 50 Hz, 10 KA for lighting and other domesitc loads including necessary copper lugs etc, complete all as specified and directed.
S&F in replacement connection and testing 'C' series, SP, MCB 06 to 32 Amp, 240 Volts, 50 Hz, 10 KA for lighting and other domesitc loads including necessary copper lugs etc, complete all as specified and directed.
S&F in replacement connection and testing 'C' series, SP, MCB 40 Amp, 240 Volts, 50 Hz, 10 KA for lighting and other domesitc loads including necessary copper lugs etc, complete all as specified and directed.
Fixing only serviceable MCB SPN/ SP of any capacity, complete all as specified and as directed.
S&F in replacement LED street light fitting, 25/35 Watt, 230 Volts, AC, outdoor type with high pressure die-cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed.
S&F in replacement surface/ recessed mounting LED down lighter, round shape, 15 Watt, 220 Volts, AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp, suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as spesified and directed.
S&F in replacement MCB TPN 63 Amps, 415 Volts, 'C' curve, 10 KA, complete all as spesified and directed.
S&F in replacement metal clad plug socket, single pole enclosure with two pin earth plug and socket with one single 20 Amp, 240 volts MCB, complete all as specified and directed.
S&F PVC insulated single core copper conductor of size 1.5 Sqmm FRLS, complete all as spesified and directed.
S&F PVC insulated single core copper conductor of size 2.5 Sqmm FRLS, complete all as spesified and directed.
S&F in repacement electrical PVC round plate cover, complete all as specified and directed.
S&F in replacement 3mm thick plastic laminated ebonite sheet cover of size 200mm x 150mm including cutting / finishing or making hole for mounting of switches, sockets, regulators etc, complete all as specified and directed.
S&F in replacement 3mm thick plastic laminated ebonite sheet cover of size 250mm x 200mm including cutting / finishing or making hole for mounting of switches, sockets, regulators etc, complete all as specified and directed.
M&L for disconnecting all electrical connection from MCB DB TPN / wall mounted panel box for re-connecting the same with providing proper copper bottle lugs of suitable size and removing the burnt out internal wiring of DB/ panel complete with providing PVC flexible conduit for hanging wire, complete all as specified and directed. Note :- Replacement burnt out MCBs of any type/ size may be measured and paid separately under relavent item.
Taking down/ removing existing damaged cable connection from MCB DB/ wall mounted panel board by making cutting chases on wall / floor to extend the shorten UG cable of any type and size from loop and making fresh to reconnect the same with suitable aluminium lugs complete including distribute the load equally on each phase, complete all as specified and directed. Note :- Cutting of wall / floor shall be measured and paid separately.
S&F in replacement on load change over switch, 4 Pole, 415 Volts, in sheet metal enclosure capacity 100 Amps, complete all as specified and as directed.
M&L for earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to earth lead by means of bolts nuts and washers of GI and including earthing pit charcoal, common salt, GI 4mm dia lead wire with 20mm GI medium grade watering pipe and 15mm bore light grade protection pipe upto 5 mtr length with wire mesh and funnel, PCC pit in PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates), angle iron frame and RCC cover and earth work, complete all as shown in electrical plate No.3 of SSR -2009 (Part-1) and directed.
M/S JANDIAL ENTERPRISES (BID ID -3073637)
KUMAR CONSTRUCTION CO (BID ID -3066671)
SINGH CONST CO (BID ID -3064239)
M/s ARJUN SINGH (BID ID -3063391)
VARDHMAN INTERNATIONAL (BID ID -3074526)
M/S SHREE RAM DUBEY AND SONS (BID ID -3074799)
takashdeep traders (BID ID -3078257)
S K BROTHERS (BID ID -3064922)
M/S GURU DEV BUILDERS (BID ID -3066695)
JOGINDER SINGH (BID ID -3072210)
anil construction co. (BID ID -3073776)
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .