GRAM SARAI SEHJAN MAI BARAT GHAR /SAMUDHAYIK BHAWAN KA NIRMAAN KARYA -NTPC LOT NO 02

Earth work in exacavation by mechanical means(hydraulic exacavator/manuel means in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqmon plan),including dressing of sides and ramming of bottoms,lift up to 1.5 m,including getting out the exacavated soil and disposal of surplus exacavated soil as directed ,within a lead of 50 m,(all kind of soil)DSR sl no.2.8.1

Treatment of soil under existing floors using chemical emulsion @ one per hole , 300 mm apart including dreilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 course sand ) to match the existing floor with chlorophriphos lindain E.C. 20% with 1% concentration . DSR sl no. 2.35.3

P/L of cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) and curing complete i/c cost of formwork in foundation and floors.DSR sl.no 4.1.10

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation & plinth Cement mortar 1:6 (1 cement : 6 coarse sand).DSR sl.no 6.1.2

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation & plinth Cement mortar 1:4(1 cement : 4 coarse sand).DSR sl.no 6.1.1

12 mm thick plaster of mix 1:6 with cement & Coarse sand of 1.25 FM fair side single and half brick.DSR sl no 13.4.2

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).DSR sl.no. 5.3

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.DSR sl no2.25(a)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand).DSR sl no. 6.4.2

Half brick masonry with common burnt clay F.P.S. (non modular) M-150 bricks of class designation 7.5 in superstructure above plinth level up to floor Cement mortar 1:3 (1 cement :3 coarse sand as per DAR 6.13.1

P/L cc in retaining wall,return wall,wall(any thickness)including attachedpilasters,columns,piers,abutments,pillars,struts,parapet,coping,bedblock 1:2:4(1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20 mm nominal size).DSR sl.no. 4.2.3

TMT Fe 500 or iron in plain work such as reinforced concrete or reinforced brick work (when not included in all over rats) wrought to required shapes as necessary including bending for proper completion of work and wastage supply of steel its wastage.sl.no.5.22 B.1

Supply & fixing of Fan Box.

Providing and fixing 1mm thick M.S. sheet door/window with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.(Using M.S. angels 40x40x6 mm for diagonal braces). (DSR sl. no.10.5.1)

Supplying and filling in plinth with sand under floor including watering ,rammimg consolidating and dressing complete.DSR sl no.2.27

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete with 20 mm nominal size stone aggregate as per DAR 11.3.1

Providing and laying vitrified floor tiles in 60x60 cm size (thickness to bespecified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.As Per CPWD DAR 11.41.2

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment ofmatching shade complete.As Per DSR 11.37A

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.As Per DSR 11.37

Providing & fixing glass Strips of 4 mm thickness 40 mm deep in joints of floors & skirtings at the time of laying floors , flash with floor level , including labour and T & P etc. complete.DSR item no.1149

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR sl. No. 13.80)

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as per DAR 13.46.1

Applying primar coat with ready mixed red oxide zinc chromite primer of approved brand.DSR sl. No.13.50.3,13.50.4

Supply and Fixing of Plain glass with atul or equivalent I.S.I marked quality putty, brads and springs complets(a) 4mm thick glass pan in Window & Ventiletor.

Supply and fixing of P.V.C. Pipe 110 mm dia for Rain water pipe. DSR sl. No.12.41.2

Providing and Laying of Interlocking Concrete Block Pavements having rubber moulded reflective zig - zag 80 mm thick tiles of precost compressed C. C. passing minimum 30 megapascle compressive strength I S I Marked as per drawings and Technical Specification Clause 1504.

S/F of Urinal pot 450x350 mm

S/F of 580mm Orrisa Pan

S/F of 150x100 mm SW Gully trap

S/F of Wash hand basin 550x400 mm

S/F of 110mm dia P.V.C pipe.

Filling of Brick batts in soak pit

P/F of 32 mm P.V.C waste pipe

Wiring point for light with 1.0 Sqmm FR P.V.C. insulated multistrand single core copper conductor cable in P.V.C.conduit with 1.50 Sqmm FR P.V.C. insulated multistrand copper conductor cable as earthwire drawn inside piano type switch & ceiling rose / angle / batten holder on 3mm thick phenolic paminated backalite sheet etc. complete in all respect as directed including matching colour wash.As perS.I.No. 138(C)

Wiring point for fan / fresh air fan (light dutyexhaust fan) with 1.0 Sqmm FR P.V.C. insulated multistrand single core copper conductor cable in P.V.C.conduit with 1.50 Sqmm FR P.V.C. insulated multistrand copper conductor cable as earthwire drawn inside piano type switch & ceiling rose on 3mm thick phenolic paminated backelite sheet etc. complete in all respect as directed including matching colour wash.As perS.I.No. 140(C)

Wiring point for plug with 1.0 Sqmm FR P.V.C. insulated multistrand single core copper conductor cable in P.V.C.conduit with 1.50 Sqmm FR P.V.C. insulated multistrand copper conductor cable as earthwire drawn inside piano type switch & socket etc. complete in all respect as directed including matching colour wash.As perS.I.No. 141(C)

Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A /250 V flush type universal socket in suitable M.S.box of 175mm x 100mm x 50mm size with phenolic laminated backelite sheet cover 3mm thick fixed with brass machine screw and cup washer. .As per S.I.No. 1139

S/W of sub rnan with 20mm dia heavy duty (2mm thick )PVC conduit with 1 nos 2.5 sqm mm mullistand copper conductor cable as earth continuty wire drown condut comprete in all respect SI No. 211 C

S/F of surfece flush mounting 12 ways SPN distrubution board without MCB complete in all respect SI No_ 1025 CAT A

S/f of recess/surface/pendent mounting round 10-15 wart LED down liter heaving powder coated die cast alorninuam houshing with heat sink,duffuseri reflector and driver set complte, in all SI No.1402 Cat A

Erection & testing of ceiling Fan & Regulator SI No-1116

S/F of 18 watt. Single. CFL complete in all respect

S/F of ceiiing fan of approved Quality Size 48 inch. complete in all respect for IS! mark

S/F of 0.5 Amp to 5Amp SP MCB (10KA) C, curve SI No. 1001

SIF cf 6 Amp to 32 Amp SP MCB (10KA) C, curve SI Flo 1002 Cat-B

SIF of 40 Amp DP isolator SI No. 1005 Cat-A