Erection of HT OH and lighting line for illumination of new public road near Narharipur Village Junction to Langijoda School near the boundary of Bhubaneswari OCP,BA

Amount

Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required.

Erection of all aluminium conductor of 7/3.40 mm to 7/4.00 mm diameter and above including binding etc. as required. 40 Mtr x 3 ph x 8span x 0.273KG/M=294.84 Kg

Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) pole top bracket/ cross arm for single 11 KV over head line conductor complete with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) V shape cross arm for two 11 KV over head line conductors complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.

Erection of pole top/ straight two wire/ V shape two wire, angle iron/ channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/33 KV as required.

Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.

Erection of double pole 3 wire cross arm for 11KV/ 22KV/ 33 KV over head lines as required.

Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required.

Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required.

Supplying and erection of three piece nonlinear resistor type lightning arrestor suitablefor 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required

Providing and fixing 25 mm X 5 mm GI. strip on surface or in recess for connections etc. as required

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supply of 11kV 400 Amps Double break GOAB Switch with heavy class GI Pipe (IS: 9920/ 1985 marked) porcelain post insulator made .

Supply of DO Fuse 11kV, 400 Amps as per IS:9385/1980

Erection of GOAB switch , DO Fuse and lighting transformer upto 50kVA as instructed by Engineer I/C.

Supply of PSC pole 9 Mtr 300kg WL

Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required. Above 8.0 mtrs. And upto 10.0 mtrs.

Supplying of channel iron 75mm x 40mm x 6mm cross arm for 4 wire OH line complete with clamps,bols, nuts & washer etc. including drilling of holes for insulaor pin sets and painting with primer & finish paint etc as required.

Erection of angle iron / channel iron cross arm on wood/ RCC /PCC / Steel tubular / Rail pole etc. as reqd.

Supply & Erection of 75mm x 90mm shackle Insulator with GI Bolts, Nuts and straps etc as reqd .

Supplying and fixing of 32 mm dia X 2.00 metres long GI. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 Each 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Supply of 3 x 35 sqmm + 1 x 25+ 1x16 sqmm AB cable (4 core).

Erection of ACSR conductor/AB Cable of 7/2.11 mm to 7/3.00 mm diameter including binding etc. as required

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 100 Amp TP&N

Supply of 110 Watt LED Street light ISI marked with IP66.

Erection of Light fittings as required.

Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC

ART ENGINEERING (BID ID -1154168)

M/S B.K ENTERPRISES (BID ID -1153744)

TRISHAKTI ENGINEERING (BID ID -1152788)