SPL REPAIRS TO BLDG NO P 136 P 137 P 139 P 140 AT ASSAYE LINE MD ACCN UNDER GE NORTH BANGALORE

Amount

Demolition of Cement Concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed

Demolition of reinforced Cement Concrete (reinforced) of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed

Demolition of (un-reinforced) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as specified and as directed

Taking down chowkhats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each etc complete all as specified and as directed

Taking down chowkhats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4.0 Sqm each etc complete all as specified and as directed

Taking down Shutters of any description wooden shutter but exc 1 sqm and n exc 2 sqm each complete all as specified and as directed

Taking down cement plaster of any description hacking for key or raking out joint on old brick work / stone / concrete surface etc complete all as specified and as directed

M&L for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded stone aggregate) as in sub base of flooing etc complete all as specified and as directed

M&L for 25 mm thick Cement concrete type B-0,1:2:4 (12.5mm graded stone aggregate) as in levelling course of flooring etc complete all as specified and as directed

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

M&L for 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded stone aggregate as in plinth protection etc, finished even and smooth without using extra cement complete all as specified and directed.

M&L Vitrified Ceramic tiles 8 to 10 mm thick coloured tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

All as per item No 12 above but as in skirting / dado incl 10 mm thick plaster in CM 1:3 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed

M&L Glazed ceramic coloured tiles 450 x 300 mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match incl backing coat 10 mm thick in CM 1:4 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types incl 15 mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L Pre-cast Cement concrete Type 1:3:6 using (20 mm graded stone aggregate) with solid blocks, exc 10 cm in width and setting in CM 1:6 incl demolition of brick Work / Stone Masonry/PCC block masonry built in cement mortar of any description all as specified and directed.

M&L for Walling of Stone Masonry random rubble, uncoursed well bonded, bedded and solidly hearted, built in CM 1:6 etc incl demolition of brick Work / Stone Masonry/PCC block masonry built in cement mortar of any description all as specified and directed.

M&L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4 etc complete all as specified and as directed

M&L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4 incl raking out joints/ pointing to masonry in single detached joints for flashing, etc complete all as specified and as directed

M&L for Reinforced Cement Concerete 1:2:4 (nominal mix) Type B-0 "(12.50mm graded stone aggregate) as in damaged Chajja (soffits) / down ward Facia/ Vertical Surface by complete removing of damaged portion including removing the rusted portion of steel iron incl form work etc complete all as specified and as direted Notes : Reinforcement shall be measured and paid seperately

M&L for Pre-cast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 etc incl demolition of existing RCC Slab of any description and in any position etc complete all as specified and directed.

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed

M&L for rendering for ceiling 5 mm thick in CM 1:3 on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:6) on other than fair faces of brick work or concrete/stone masonry surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:4) on other than fair faces of brick work or concrete / stone masonry surface finsihed even and smooth (without using extra cement) mixed with water proofing compound etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

M&L for providing water proofing treatment to sunken portion of WCs, bathroom etc by applying cement slurry mixed with two component Elastomeric Acrylic based polymer modified cementitious composite compound coating. incl taking down existing treatment incl PCC as in sunken protion of WC and removing beyond the premises of site. The following procedures to be adopted during the execution of work :- (i) First layer of slurry of cement @ 0.488 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 kg/sqm. The layer will be allowed to air cure for 4 hours. (ii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with with Acrylic based polymer modified cementitious composite compound @ 0.126 kg/sqm. The layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (iii) 20mm thick screed in cement mortar 1:3 mixed with liquid water proofing compound. (iv) Provide 40mm dia light grade GI spout at the lowest point with 30cm projection beyond the out face of the wall. (v) Cement concrete 1:5:10 type E-2 using 20mm granded brick aggregates as in sunken portion of WC Notes: For payment purpose, plan area of sunken portion to be measured

M&L providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed

M&L Screed bed 10 mm thick in CM (1:3) over concrete surface mixed with and incl water proofing compound incl taking down existing roof treatment etc along with cement plastering etc complete all as specified and directed.

M&L for removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and S&L 3 mm thick APP modified water proofing membrane, weight not less than 3.00kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over compatible primer/bonding bitumen @ 0.30 Litr/Sqm and torch applications of membrane with 100mm side overlap and 150mm end lap after necessary preparation of surface and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm complete all as specified and directed.

M & L for 40 mm thick brick tiles bedded in cement mortar (1:6) or lime mortar (1:3), 15mm thick mortar and joints grouted flush in cement mortar (1:3) including taking down exiting tiles including bedding

Supply only water proofing compound (Liquid) complete all as specified and as directed.

S&F 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one or more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed

S&F factory made 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one or more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed

M&L for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in hold fast and filling of pressed steel chowkat etc complete all as specified and as directed

M&L MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed

S&F 35mm thick flush shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed

S&F 35mm thick 2nd class hard wood factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed

S & F 35 mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed

S&F Box type Steel Windows/Ventilators double side shutters (Windows side hung type, Ventilators top hung) pressed steel frames made out CRC Sheet of 80 x 60 x 1.25mm double rebated, Shutters box type made out of CRC Sheet of 40 x 20 x 1.0mm, windows & ventilator shutter fixed made of glass and gauge fixed with box type hinges, Aluminium die cast handles for glass shutters, Iron flat type handles for mesh shutters, Telescopic stays, etc complete all as specified incl 12mm square guard bars/grill welded with steel frame (100mmc/c horizontically) all as specified and directed by Engineer-in-Charge. NOTE: (i) Payment under this item will be make combined for steel frames, steel shutters and Guard bar/Grill, However unit rate quoted shall deemed to include cost of beading, fittings such as handles, hinges,Telescopic stays, locking arrangements and fixing of glass and wiremesh etc. (ii) 4 mm thick sheet glass and 0.36 mm dia stainless steel wire mesh be measured and paid separately. (iii) Weight of Grill/Guard Bars, handle,hinges and locking arrangements shall not be accounted for payment purpose . (Note : All Windows/Vent design as per CECZ TD drg No 539)

S&F in repairs 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, fixed in kitchen Cabinet or cupboards all as specified.

M&L for Plain fillets square, rectangular or triangular in section clean sawn , secured with nails or brads of second class soft wood fixed to cupboard shutter Not Exc 3 sqcm cross section area all as specified and directed.

S & F in repairs 40 mm dia cupboard knobs fixed with nut, screw and washer of Brass,polished complete all as specified and as directed.

S & F in repairs 30 mm width of flap (when open) Continuous (piano) hinges, mild steel, bright finish or electro galvanised etc complete all as specified and as directed

S & F for solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed.

S&F 4mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and as directed

S&F 4mm thick sheet Figured glass, pin head type and glazing with oil putty in squares in not exc 0.5 sq.m in each pane etcc omplete all as specified and as directed

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed

S&F in repairs 4mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and as directed

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed

S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed

S&F 100 mm thick butt hinges, medium weight, Stainless steel and fixed etc complete all as specified and as directed

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S&F 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and as directed

S&F Aluminium 100 mm Hasp and staple, safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified and as directed

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed

S & F in repair vitreous china wash down water closet pan (Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat , black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete incl plastic EWC seat cover, coloured closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed. Make: Cat part: 2008 & 2308 of cera or tis equivalent as per CA.

S&F in repairs vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, 32 mm bore waste stainless steel coupling and LDPE pipe 600 mm long complete all as specified and directed.

S&F in repair PVC flushing cistern with flush out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, etc complete all as specified and as directed

S&F in repair 15mm Bib taps Fancy type, Chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed

S&F in repair 15mm bore dia of pipe CP Mixer for mixing hot and cold water screwed down for iron pipe etc complete all as specified and as directed

S&F in repair 15mm dia Angle / Stop / Concealed cock, Fancy type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc complete all as specified and as directed

S & F in repairs 15 mm Centre hole Basin mixture W/o Pop Up all as specified and as directed.(Cat No 6850 Marcus series of Prayag or equivalent make as specified in CA)

S & F in repairs 15 mm Sink mixture with regular spout W/M all as specified and as directed.(Cat No 6855 Marcus series of Prayag or equivalent make as specified in CA)

S&F in repairs 100 mm overhead shower ABS with brass Arm (225mm) & flange including fixing to steel pipe or union complete all as specified and as directed. (Cat No BS-67 of Prayag or equivalent make as specified in CA)

S & F Bib Cock 2 way double handle with CP flange as fixed in repair all as specified and as directed. (Cat No-6812 Marcus series of Prayag or equivalent make as specified in CA)

S&F in repairs Health faucet, brass body with 1mtr SS braided tube & wall hook complete all as specified and as directed (Cat No-BEA-41 of Prayag or equivalent make as specified in CA)

S&F in repairs Soap dish chromium plated brass all as per Cat Part No BA-45 of Prayag or equivlaent makes fixed in wall as per manufacturers instruction.

S & F in repairs Mirror 600x450 x 5-6mm thick with PVC frame complete all as specified and directed

S&F in repairs Stainless steel plate rack of size 990.60mm x 914.40mm including fixing to wall as directed etc complete all as specified and as directed

S&F in repairs Towel rail 450 mm long incl fixing arrangement etc complete all as specified and as directed (Make Cat no GM-04 of Prayag or its equivalent make of CA)

S&F in repairs Unbreakable corner shelf (Cat No BEA-44A of Prayag or equivalent make as specified in CA) complete all as specified and directed

S&F in repairs peg set of six (Cat No BEA 30 of Prayag or equivalent make of CA) fixed in wall as per manufacturers instruction

S & F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking down existing GI/CPVC pipe line etc complete all as specified.

S & F 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking down existing GI/CPVC pipe line etc complete all as specified.

S&F in repairs rotational moulded polythene water storage tank triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed

S & F in repairs 25 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

S&F PVC connection 600mm long 15mm dia complete all as specified.

S&F in repairs 75 mm dia of PVC (SWR) Multi floor trap, plain with grating including jointing with solvent cement etc complete all as specified and as directed

S&F 110 mm PVC, SWR pipes type 'B', single socketed in any length with rubber ring joint laid in trenches or in floor etc incl dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F 110 mm PVC, SWR pipes type 'B', single socketed in any length with rubber ring joint fixed on walls etc incl dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F 75 mm PVC, SWR pipes type 'B', single socketed in any length with rubber ring joint laid in trenches or in floors etc in repairs complete all as specified and directed

S&F 75 mm PVC, SWR pipes type 'B', single socketed in any length with rubber ring joint fixed on walls etc in repairs complete all as specified and directed

S&F 110 mm dia PVC (SWR) bends (any radius) etc complete all as specified and as directed

S&F 110 mm dia PVC (SWR) bends (any radius) with acess door etc complete all as specified and as directed

S&F 110 mm dia PVC (SWR) Junction (Single T) equal or unequal etc complete all as specified and as directed

S&F 110 mm dia PVC (SWR) Junction (Single T) equal or unequal with access door etc complete all as specified and as directed

S&F 75mm PVC (SWR) bends (any radius) etc complete all as specified and as directed

S&F 75mm PVC (SWR) bends (any radius) with acess door etc complete all as specified and as directed

S&F 75mm dia PVC (SWR) Junction (Single T) equal or unequal etc complete all as specified and as directed

S&F 75 mm dia PVC (SWR) Junction (Single T) equal or unequal with access door etc complete all as specified and as directed

S&F 110 mm dia PVC SWR branch pieces, single (equal or unequal), Single Y equal or unequal etc complete all as specified and as directed .

S&F 75mm dia PVC SWR branch pieces, single (equal or unequal), Single Y equal or unequal etc complete all as specified and as directed .

S&F in repairs 110 mm dia bore PVC (SWR) vent cowls

S&F 75 mm dia bore PVC (SWR) vent cowls

Complete removal of existing treatment of wall surface (Internal and External) by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface incl rubbing and washing etc complete all as specified and as directed

M&L for 2mm thick wall care putty on new / old plastered surface of wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed

M&L for preparing newly plastered surface of ceiling and applying three coat of white wash etc complete all as specified and as directed

M&L for Preparing Old ceiling surface and applying one coat of white wash etc complete all as specified and as directed

M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of alkali resistance primer complete all as specified and as directed

All as per item no 103 above, but only two coats of OBD on old Plastered surface of wall

M&L for Preparing Old wall surface and applying two coat of white wash etc complete all as specified and as directed

M&L for Preparing New wall surface and applying three coats of white wash etc complete all as specified and as directed

M&L Preparing new /Old Previously untreated plastered surface of wall, facia, chajja ceiling etc and Applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm including filling the cracks etc with crack filling material as per manufacturers instructions complete all as specified and as directed.

S&F in repairs stainless steel curtain rod of 25 mm bore (weight not less 400 gms per running meter) incl fancy finale caps cap (02 nos in each curtain rod) etc complete all as specified and as directed

S&F in repairs stainless steel bracket for curtain rod of 25 mm dia made out of SS flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl plug of size not less than 50 mm long etc complete all as specified and as directed

M&L for spraying antiweed/non toxic solution / chemicals containing Glyphosate as per manufacturer instructions and removing the weed including the roots after ensuring complete de-germification pf plant/weed and cutting down the plant/trees off from roof/top sides of external walls of bldgs, in chajjas, wall junctions, junctions of GI/CI/AC/PVC pipes and taking out roots entered in wall/slabs, including making good the surface using PCC 1:2:4 type B-1 or cement mortar 1:2 or brick work in CM (1:4) plastered with CM (1:4) to match with existing surfaces and repairing the pipes and joints which was effected by cutting down/taking out process for plants/tress located on the bldgs at any height of bldgs complete all as specified and as directed

Cutting exising manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required.

Resecuring or easing & adjusting of joinery (door / window of any specification & description) without taking down shutters of any description exc 01.00 sqm but n.exc 2 sqm as each complete all as specified and directed

S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate complete

S&F 6 feet x 4 pipes pully operated cloth drying system consisting of aluminium anodised pipes, each of outer dia 22 mm and inner dia 19.80 mm. Pulleys made up of delrin with rope guide mounted on channel pair of length 24 inches (distance between two pipe is adjustable). Locking system to hide rope knot. Channel to be mounted or fixed with self tapping screws provided in kit. Rope will be polyster braided undyed of 3-4 mm dia complete all as specified and as directed.

M&L for preparing of new or previously untreated surfaces of wood of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer all as specified.

M&L for preparing of old or previously untreated surfaces of wood of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint all as specified.

M&L for preparing of old or previously untreated surfaces of steel of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws etc incl dismantling of Asbestos cement (corrugated, semi corrugated, etc.) etc complete all as specified and as directed

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in ridges / valley to wall, fixed with self tapping screws incl dismantling of Ridges etc complete all as specified and as directed

M&L MS rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality-A etc complete all as specified and as directed

Dismantling of wall and ceiling boards any thickness of any description including cover fillets complete all as specified and directed.

S&F in position suspended false ceiling using E- grid suspended ceiling grid system of grid size 600x600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross Tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24mm x 3mm using 4mm thick high pressure stream cured classic variant E-board, designer pattern (ISI marked, IS No 14862-2000) fibre cement E board to be placed in the grid suspended by 4mm GI wire hangers from the purlins of the roof with butter fly clips, complete all as specified and directed.

M&L for preparing of new or previously untreated surfaces of steel of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer all as specified.

Excavation in trenches in hard / dense soil not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of cables / errection of pole etc complete all as specified and as directed.

Returning, filling in trenches incl spreading leveling watering and well ramming in layers with hard/dense soil not exc 25 cm thick in each layer complete as specified and as directed

Removing excavated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed

M & L for sand cushioning with a layer of M-sand under and above the cable complete all as specified and as directed. Note:- Punned thickness will be measured for payment.

S&L burnt bricks for cable protection complete as specified as directed

S&L cable XLPE insulated screened PVC bedded galvanised steel strip or wire armored,electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor connected with suitable legs including taking out the existing unserviceable cable for following size 3.5 C x 25 Sqmm

Supply, installtion,testing commisioning of LT panel, Indoor type, platform mounted, totally enclosed, dust and vermin proof, openable from both front and rear side, made out of 3.15 mm thick CRCA sheet complete including inner chambers/partitions to mount the following electrical accessories and built upon 50x50x6mm angle iron frame work, having front & rear hinged doors, lifting lugs (2 Nos), provision for earth strip connection, bottom detachable gland plates, connecting using suitable size of zinc plated and passivated nut, bolts and washers. The cabinet & all members should be chemically treated with anti-corrosive chemicals and apply spray paint with two coats of synethetic enamel paint over a coat of red oxide primer. The internal connection of MCCB should be provided with Al strip of suitable size and necessary grouting/ foundation all as required at site and comprising following:-including dismantling and taking down of old unsv panel complete all as specified BUS BAR - Aluminium bus bar system of capacity 400 amp four pole duly colour coded. INCOMER - (a) MCCB, 4 pole of capacity 160 amps with breaking capacity of 35 KA . - 01 No. Outgoing -(a) MCCB, 4 pole of capacity 63 amps with breaking capacity of 35 KA . - 07 No. (b) Timer switch and contactor for switching ON/ OFF Street light daily astronomical calculation of sunrise/sunset timesbased on intered loc or loc coordinates. Nos-01 (c) Digital multimeter - 01 No (d) Phase Indicator Lamp RYB with sheds LED Type - 01 Set of three

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth of GI strip 32x6mm as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe wire mesh and lugs, incl test point complete all as specified and as directed.

S&F in replacement GI tubing medium grade 50 mm bore with all fitting laid in trenches / walls including taking out old us GI pipe

S&F in replacement GI tubing medium grade 25 mm bore with all fitting laid in trenches / walls including taking out old us GI pipe

S&F in replacement GI tubing medium grade 20 mm bore with all fitting laid in trenches / walls including taking out old us GI pipe

S&F in replacement Gun metal Gate valve of size 50 mm dia with iron wheel.

S&F in replacement Float valve of size 20 mm dia with PVC body aluminium float rod, nylon float high pressure type (Make:- Prayag).

M&L, Construction of Valve pit chamber of size 600 mm x 600 mm x 600 mm internal dimension brick construction including all excavation and earth work in any type of soil, returning, filling in disposal of surplus soil to a distance not exc 50m and depositing were directed, PCC foundation of the mix (1:2:4), type D-2, brick masonry including plastering, rendering 15mm thick in cement mortar (1:4) internally finished even and fair and externally as the work proceeds in same mortar and suitable size angle frame with mild steel angle iron 40X40x6mm, MS sheet cover 3 mm thick with handle and locking arrangements and painting all steel surfaces with two coat of synthetic enamell paint over a coat of red oxide primer and painting all the MS embeded in PCC with two coats of black bituminuous paint as approved, complete all as specified and directed including dismantaling and taking out old u/s.

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, regulators, sockets etc and making good the disturbed surface of walls, ceiling etc incl painting with same colour of the back ground complete all as specified and as directed by Engineer-in-Charge.

Point wiring complete with 1.5 Sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit incl accessories surface type run on walls/ ceiling incl MS terminal boxes fabricated with 1.6 mm thick MS sheet surface mounted/ concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. One light / fan/ Exhaust Fan point controlled by one switch

As per item No. 139 above but for One light controlled by two way switch

As per item No. 139 above but for One 3 pin socket out let 5 Amps on independent board

As per item No. 139 above but for One 3 pin socket out let 5 A on same board

As per item No. 139 above but for One Bell / Buzzer Point controlled by bell push

Point wiring complete with 2.5 Sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit incl accessories surface type run on walls/ ceiling incl MS terminal boxes fabricated with 1.6 mm thick MS sheet surface mounted on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, etc., incl provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. Note for Item No 140 & 145:- (i) The earth wire for the points in the same circuit can be looped from point to point (ii) Earth wire shall be taken inside the conduit (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring. (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring.

S&F LED batten suitable for indoor applications 20 Watts, 4 feet with extruded aluminium housing & integrated LED channel complete with all accessories including taking out old fittings all as specified and directed. Make: Bajaj, Cat No. BCLAB 20 W LED P S or equivalent Makes & model in Havells/Phillips/CG

S&F LED batten suitable for indoor applications 10 Watts, 2 feet with extruded aluminium housing & integrated LED channel complete with all accessories including taking out old fittings all as specified and directed. Make: Bajaj, Cat No. BCLSB 10 W WH or equivalent Makes & model in Havells/Phillips/CG

S&F of switch piano flush type single pole one way 5 Amps

S&F of switch socket combination 2 in 1, 3 pin 6 and 16 Amps flush type universal all as specified and as directed

S&F of switch piano flush type single pole two way 5 Amps

S&F of switch socket combination 5 pin 2 in 1, 5 A Flush type all as specified and as directed

S&F stepped type electronic fan regulator flush switch type all as specified and as directed

S&F in replacement Decorative, wall mounting, champagne gold finish fixture with plastic body suitable for 9 watt LED lamp B22 base all as specified and directed by Engineer -in-Charge

S&F of bell push flush type 5A all as specified and as directed .

S&F of Ding Dong bell AC 230 volts single pole.

S&F in replacement of MCB SPN 240 volts 40 Amps complete all as specified and as directed

S&F in replacement of MCB single pole 240 volts 10/16/20/32 Amps complete all as specified and as directed

S&F in replacement of MCB DB SPN 12 way double door type 240 volts with 200 Amps rated busbar as specified and as directed.

S&F in replacement of MCB DB TPN 4 way double door type 240 volts with 200 Amps rated busbar as specified and as directed.

S&F in replacement of MCB TPN 415 volts 10 KA 'C' 63 Amps complete all as specified and as directed

S&F ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed

Provision of new sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 2.5Sqmm along with 2.5 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor one run along with suitable size of PVC conduit surface type including taking down existing unsv sub main wiring complete all as specified and as directed

Provision of new sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 6 Sqmm along with one run of 6 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run along with suitable size of PVC conduit surface type including taking down existing unsv sub main wiring complete all as specified and as directed Note for Item No 162 & 163 :- (i) 3 run of cable and one run of conduit will be measured as unit length.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles, check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe wire mesh and lugs, incl test point complete all as specified and as directed including dismantaling and taking out the old u/s earthing.

Supply and fixing 35 W LED bldg security light fitting with pressure die cast housing along with prismatic polycarbonate difuser with IP 66 protection including taking out old fittings. Make:- Bajaj, Cat No.:- ENXT P 35L WH PO PC SD MT or Equivalent Makes & model of CA

S&F Storage type water heater 25 Ltrs BEE 5 star rated complete incl steel wired pipe for hot/cold water connection for inlet and out let water etc complete all as specified and directed at site .

S&F ceiling fans complete with complete accessories, 230V, SP 1200 mm Sweep with BEE 3 Star rating complete with all accessories and fixing the fan from ceiling rose with 3 core flexible copper wire 24/0.20 sqmm, etc all as specified and as directed. Make Bajaj, SABSE TEZZ EE 03. Model No 251120 and equ on Havells/CG/ USHA.

S&F in replacement GI Bracket made out of GI tubing medium grade 25 mm bore , approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm , nuts, bolts, washers etc and including before fixing applying two coats of aluminum paint over a coat of red oxide primer including removing the old existing GI bracket from bldg complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete including necessary arrangement for installation all as specified and directed.

S&F in replacement LED lamp suitable to fit in angle holder of capacity 09 watt. Make: Bajaj or eqv in Philips/Havells/CG.

M&L for core cutting in wall for fixing of exhaust fan and making good of disturbed wall/floor, painting of existing colour all as specified and directed by Engineer -in-Charge.

Taking down ceiling fan, cable end, dismantling blades and removing fan and blades greasing, cleaning, painting and refixing of the same.

M&L for painting of celing fans complete, in situ with synthetic enamel pain by spraying incl filling cavities with filler, one coat after cleaning all dust etc.

S&F in replacement PVC Fresh air fan of 200 mm sweep 1200/1400 RPM with louver. Make CG/Usha/ Orient/Phillips/Bajaj.

S&F in replacement Sheet metal enclosure single pole and neutral with a two pin and earth plug and socket with one single pole MCB 32 Amps, 230 Volts AC complete all as specifeid and directed by Engr-in-Charge

Shanthi Construction (BID ID -3351388)

Meghana and Gowda Enterprises (BID ID -3344792)

M/S SIRI BUILDERS (BID ID -3343752)

M/S POTHIRAJ AND CO (BID ID -3343894)

PRACHANIVA CONSTRUCTIONS (BID ID -3344136)