PROVN OF CERTAIN LBW, REV AND MINOR WORKS UNDER GE AWC MHOW.

Amount

Surface excavation in soft soil n exc 30 cm deep and avg 15 cm deep and getting out complete all as specified and as directed.

Excavating in trenchs n exc, 1.5 m wide and n exc 1.5m in depth for foundation etc or for shafts wells cesspits, manholes pier holes, laying of cables, , pipe etc n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed.

Returnning filling in including spreading leveling watering and well ramming in layers not exc 25cm any types of soil complete all as specified and as directed.

Removing of excavated material exc 250 m not exceeding 500m and depositing where directed at a level and not exceeding 1.50m above the staring point complete all as specified and directed.

Material and labour for PCC 1:4:8, type D-2 crushing 40mm graded crushed stone aggregate) as in foundation filling, mass concrete, sub floor, Sub base etc complete all as specified and directed.

Material and labour for PCC 1:2:4, type B-1 crushing 20mm graded crushed stone aggregate) as in surface channel etc complete all as specified and directed.

Material and labour for PCC 1:2:4, type B-1 crushing 20mm graded crushed stone aggregate) as in lintels up to 1.5 m clear span, bands, benching and hold fasts including necessary formwork required etc complete all as specified and directed.

Material and labour RCC M-25 design mix in foundation footing, plinth beam, bases for column and pedestal using 20mm graded curshed aggregate complete all as specified and directed.

Material and labour RCC M-25 design mix in column, pillars, piers, post etc using 20mm graded curshed aggregate complete all as specified and directed.

Material and labour RCC M-25 design mix in lintel beam,roof beam etc using 20mm graded curshed aggregate complete all as specified and directed.

Material and labour RCC M-25 design mix in roof slab etc using 20mm graded curshed aggregate complete all as specified and directed.

Material and labour RCC M-25 design mix in Chajjas etc using 20mm graded curshed aggregate complete all as specified and directed.

Formwork to sides of concrete foundations footings bases of columns raft and raft beams sides and sofits (if any) of foundation and plinth beams, and similar work vertical or to batter fair finished sufraces of concrete complete all as specified and as directed.

Formwork to sides of pillars posts, struts, piers, columns and stanchions fair finished surfaces of concrete Square rectangular or polygonal complete complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchibngs, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc fair finished surfaces of concrete complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work including attached pillasters, buttresses etc vertical or to batter complete all as specified and directed.

Formwork to Chajjas, troughs and similar items including edges complete all as specified and as directed.

M&L Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and bindingwith and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed.

Description same as per Item No. 18.00 but 6 mm to 8 mm dia complete all as specified and as directed.

Description same as per Item No. 18.00 but 5mm dia and over upto and including 8mm dia in stirrups spacers amd binders quality confirming to TMT bar complete all as specified and as directed.

M&L for brick work with FLY ash Bricks modular size straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified complete all as specified and as directed.

M & L 15 mm thick rendering CM 1:4 on brick work or concrete surface / stone wall in one layer with water proofing compound, surface finished even and fair witout using extra cement. Note- WPC shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and as directed.

M & L 10 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth without using extra cement complete all as specified and as directed.

M & L for 5 mm thick rendering on concrete surface in cement mortar 1:3, on ceiling , below chajja and shelves complete all as specified and as directed.

M & L for preparation newly plaster surface applying two coat of cement base paint over a coat of primer complete all as specified and as directed.

M & L applying two coat of oil bound distemper over a coat of primer including preparation of newely plastered surfaces complete as in wall surface complete all as specified and as directed.

M & L applying three coat of white wash including preparation of surfaces complete on ceiling under shelves and chajja complete all as specified and as directed.

Material and labour for moorum filling in floors of paving laid in layers not exceeding 15cm thick including spreading leveling watering and consolidation complete all as specified and directed.

Material and labour hard core of broken stone or boulders of guage n. exc 63mm deposited spread and levelled in layers n. exc 15cm thick water and rammed to a true surface complete all as specified and as directed.

M & L 25 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in base of flooring, laid over PCC sub base, surface finished even and fair without using extra cement complete all as specified and as directed.

M&L for colour non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc including 15mm th screed bed in cement mortar 1:6 set and jointed in neat cement slurry including pointing in coloured cement/colour cement to match complete all as specified and as directed.

M&L coloured glazed ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in vertical surface set and jointed in neat cement slurry and pointed in white cement with pigment to match including 10 mm thick rendering in CM 1:4 complete all as specified and as directed.

M & L 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection,Path, laid in alternate ways, surface finished even and fair without using extra cement complete all as specified and as directed.

S & F aluminium anodised sections for door, slidings, windows, ventilators, door partition including facbrication of frame shutters and and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazings clips, and rubber beadings for fixing glass panes ifn frame complete all as specified and as directed. Note: (i) Glass panes will measured & paid separately . (ii) Rubber beading will not be weighed and paid seperately.

S&F 4 mm thick figured glass , pin head type in square n.exc 0.5 sqm each pane complete all as specified and as directed.

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other overing, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Supply and fixing mild steel wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S & F factory made 25 mm thick 100% solid WPC (wood polymer composite) laminated flush door shutter of required size comprising of virgin PVC resin of K value 57-60 ( suspension grade), Calcium carbonate and natural fibers ( Wood powders / rice husk/wheat husk) and non toxic additives made from extension process WPC foam sheet single extruded (Inner) with having minimum density not less than 650 kg kg/cbm, an ISO 9001-2015 certified company , having good screw holding capacity (Screw withdrawal strength of 200 N (Face) & 1100 N (Edge) minimum compissive of 50N/mm2 Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category property of being Termite/ borer free , water/ moisture proof and fire retardant WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws , all as per direction of Engineer-In-charge ,Material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and as directed.

S & F factory made 100% solid WPC (Wood polymer composite) Door frame 90mm X 45mm (Moulded) single rebated made from wood polymer composite (single extruded process material comparison of virgin PVC polymer of k value 57-60 (Suspension grade) , calcium carbonate and natural fibers (Wood powder/rice husk/wheat husk) and Non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treaded star headed screws having minimum frame density of 750 kg/ cbm, an ISO 9001-2015 certified company , having good screw holding capacity (screw withdrawal strength of (Min 990 N ), minimum compressive strength of 58n/mm2, Modulus of elasticity 900N mm2 and resistance to spread of flame of class A category with property of being Termite/ borer proof , water/ moisture proof and fire retardant & fixed with position with SS dash fasteners / Hold fast of required dia and length , all as per specifications drawings as directed by the Engineer-In-charge ,Material test certificate and authentication should be compulsory provided by the manufacturing company including hold fast or fasteners complete all as specified and as directed.

M & L water proofing treatment on roof surface in following steps through manufacturer / authorised applicator of the manufacturer instructions complete all as specified and as directed. (i) wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction parapets, etc, and surface painting, with a layer of blown bitumen of any preparation applied hot @ 1.7 kg per sqm, blinded with grit or pea size gravel @ 0.006 cum per sqm and lightly tampered (area of flashing etc shall be added to the roof area). (ii) Laying APP based polymeric membrane minium weighing 3 kg/sqm and minium 3 mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. (iii) Applying a coat of bituminius aluminium paint @200 gm /sqm (minimum ) in two coat.

S&F brass CP towel rail 20 mm dia D type 600 mm long between flange complete all as specified and as directed.

S&F Dafry rod 20mm dia as in certain rod complete all as specified and as directed.

M&L for providing pre cast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in manholes covers and set in CM 1:6 complete all as specified and as directed.

M&L for concrete bed to drain pipe 110mm bore incl packing under and haunching against the side of pipe after they are laid and tested in cement concrete 1:4:8 type D2 using 40mm graded stone aggregate complete all as specified and as directed.

S&F butt hinges medium weight cold rolled mild steel and fixed size of hinges in 100mm complete all as specified and directed.

S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S & F 150 mm long Aluminium handles, cast type, anodised complete all as specified and as directed.

S&F vitreous China Western Style One Piece Water loset including all assecories like seate cover, connecting ring, hold fast complete all as specified and as directed.

S & F in repair Counter top Wash Hand Basin with including waste coupling and necessary acessories waste pipe etc complete of min size 450 X 350 X 130mm complete all as specified and as directed.

S & F in repair Tall body tap piller cock 12" suitable for counter top WHB hot and cold water single lever basin mixer good quality with necessary coonection etc complete all as specified and as directed.

M & L for PVC (SWR) Multi Floor trap of 75 mm outlet with grating including jointing with solvent cement complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length laid in trenches or floors complete all as specified and as directed.

Description same as per item No. 53.00 but fixed on wall complete all as specified and as directed.

S&F PVC SWR vent cowl 75mm dia bore complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with asses door complete all as specified and as directed.

S&F PVC (SWR) bends any radius 75mm dia complete all as specified and as directed.

S&F 150x150mm salt glazed stone ware gully traps square or round mouthed type P complete all as specified and as directed.

Supplying and fixing 110mm bore PVC (SWR) pipes single socketed in any lenth with rubber ring joints,laid in trenches or in floor, wall complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110mm dia complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with asses door complete all as specified and as directed.

S&F 15mm bore steel water tubing med gde galvanised concealed fixed to wall roof floors ceiling etc incl all fittings and fixtures complete including making good distempered surface all as specified and directed.

Description same as per Item No. 63.00 but 20mm bore complete all as specified and as directed.

S&F 20mm stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union complete all as specified and as directed.

S&F 15mm angle stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle fancy type chromium plated screwed ends for iron pipe or for union complete all as specified and as directed.

S&F 15mm stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle fancy type chromium plated with long sank and cup (concealed type) screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F bib tap 15mm cast copper alloy bright clutch or butterfly handlw fancy type chromium plated screwed down for iron pipes complete all as specified and as directed.

S&F pvc connection 15mm size pipe 450mm long with PTMT nuts complete all as spefied and directed.

Supply only 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated fancy type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F swivel shower of PTMT any colour for fixing to steel pipe of 15mm bore all as spfd and directed complete all as specified and as directed.ymet(minimum weight 40gms)

S&F in repairs 15mm dia wall mixer, chromium plated, continental non telephonic hot and cold with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m, complete all as specified and as directed.

S & F 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F 18/19 mm thick block board, grade 2, interior grade, commercial type, fixed with screws to timber frame work as in cupboard, wardrobe etc, complete all as specified and directed.

M & L 0.9 mm thick Decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive over 12 mm thick plywood as per manufacturer's instructions complete all as directed and specified.

M & L 12 mm thick Gypsum Board as in ceiling or wall panelling fixed with screws as per manufactur's instructions complete all as specified and directed.

S & F Anodised aluminium/ GI sanp grid frame work for false ceiling securing with 4 mm dia GI wire of 1.20 mtr centre to centre tying to roof members or bolting with self taping screws including all necessar y arrengements complete all as specified and directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L vitrified ceramic tiles(light/dark) 09 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified and directed

Description same as per Item No. 80 but in Vertical Surface including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

S&F Plywood grade BWR type BB fixed with screws to timber frame 12 mm thick, complete all as specified and as directed.

Complete removal of existing treatment on internal surface of wall by scrapping and washing complete all as specified and as directed.

M & L for preparation of newly surface and applying Two coat of plastic emulsion paint over a coat of Primer with Putty complete all as specified and directed.

M & L for preparation of old surface and applying Two coat of plastic emulsion paint over a coat of Primer with Putty complete all as specified and directed.

S & F Solid 5 mm thick PVC Wall Lining/ panelling consisting of Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing all as specified. Note : Shall deemed to be included in unit rate quoted all the material used for fixing of wall panelling on to wall or ceiling.

M&L for 150mm spread thick soling with broken boulders or quired stone interstices filled surface formed and rolled and consolidated to required gradient and camber complete all as specified and directed.

Rolling to soling of broken boulder or quened stone n exc 15 cm thickness using 8 to 10ton power roller complete all as specified and directed.

M & L PCC 1:4:8 type D-2 using 40 mm graded aggregate in sub base 150 mm thick complete all as specified and directed.

Prepainted galvalume aluminium zinc cooling GI based plane steel sheet 0.50 mm thick of any colour having tensile strength of 550 MP as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and directed.

M & L machine cut kota stone slab flooring 18-20 mm thick over cement screed base and laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to give mirror finish finished including 20mm thick screed bed in cement mortar 1 6 complete all as specified and directed.

Excavation in post hole or similar holes each n exc 0.5 cum getting out in ramming earth or broken rubble mixed with around in layers n exc 25 cm watering and removing surplus soil to a distance n exe 50 m and maikng good surface in soft loose /soil complete all as specified and directed.

M & L preparation of new steel & iron surface of width or girth exceeding 10 cm & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

S &F roof trusses (framed) trussed , posts , purlins, ratters, crane grantries railes and fastenings and heavy bracket framing (beam, tee, angle channnel or flat sections ) including distance piece cleat etc complete all as specified and directed.

S&F Prepainted galvalume aluminium zinc cooling GI based Corrugated steel sheet 0.50 mm thick of any colour having tnesile strength of 550 MP as in roof covering/clading to wall fixed with self tappering srews complete all as specified and directed.

S & F in repair Stain less steel sinks with drainage board made of 1mm thick sheet for kitchen with plug washers waste pipe, cast iron cantilever brackets connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm including bedding and cement mortar or fixing cantilever brackets and connecting union to waste pipe upto 0.5sqm each complete all as specified and directed.

Cutting holes in brick walls but in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other overing, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F Plates (plain or chequered) channels, square cut or notched with riveted, bolted or welded attachment, complete all as specified and as directed.

S & F for MS angle iron Hand rails, including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed.

S & F Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe.Traps, intercepting,inspection arms fitted with plain pattern stopper and inspection arm fitted with galvanised iron bayonet joint (or other approved pattern) with galvanised iron lever, galvanised iron chain, ring and hook.Vitreous Cliina wash basin, wliile, flat back, size 580x450 irun (for Hospilal use) excluding taps,waste, chain and plug and porcelain stopper but including brackets, complete all as specified and as directed.

Taking down Shutters of any description n exc 1.5 Sqm each complete all as specified and as directed.

S&F IInd class hard wood 35mm thick Factory made plain framed panelled shutter any number of panels of with lock rail and panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

S&F Factory made solid panelPVCdoor shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed.

S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforsed with M\S squre tube supplying and fixing in opening as per specification & drawing, complete all as specified and as directed.

S&F 150mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.

S&F 300mm long aluminium, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.barrel tower bolts of extruded sections complete all as specified and directed.

S&F butt hinge size 100mm extruded Aluminium alloy with galvanised mild steel hinges pin,anodised and fixed type complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth priming coat with pink primer and applying two coat of sythentic enamel paint all complete all as specified and directed.

M & L Cement concrete Type C2 1:3:6 (40mm graded stone aggregate) 100mm thick, complete all as specified and directed.

M & L Hardcore of broken stone or boulders guage exc. 63 mm but n exc. 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled / rammed to a true surface, complete all as specified and directed.

S & F for PVC (SWR) branch piece, double 'Y equal or unequal 110mm bore complete all as specified and as directed.

S & F for PVC (SWR) branch piece, double 'Y' equal or unequal 75mm bore complete all as specified and as directed.

S&F in repair white vitreous China Counter type wash hand basin of size 550x400mm with CI bracket and comprising of the following :- (a) Waste fitting 32mm dia brass chromium plated with long screwed shanks and fly nut flange end bedded in red lead cement and other end fixed. (b) Pillar tap cast copper alloy with capstan head chromium plated, screwed down, high pressure with or without leltered hot or cold with long screwed shank and fly nut. (c) PVC waste pipe 32mm dia 600mm long. (d) PVC Connection 15mm size with PTMT nuts of length 450mm long.

M & L Granite (of any type) tiles / slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over screed bed 20mm thick in CM 1:6, complete all as specified and as directed.

M & L Granite (of any type) tiles / slab 20mm thick machine cut, in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over screed bed 15mm thick in CM 1:3 complete all as specified and as directed.

Rounding to edges of stone slabs one edge / nosing such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

S& F in repair angle cock copper alloy chromium plated fancy type screwed down high pressure fixed with iron pipe or ferrule, complete all as specified and as directed.

S&F in repair PVC flushing cistern 10 ltr capacity high / low level white with inlet ball valve float and handle including bracket complete all as specified and as directed.

S&F in vitreous china wash down water closet padestal pattern white with 'P' or 'S' trap including PVC white seat cover, complete all as specified and as directed.

S & F Steel work in tubular trusses including special shaped washer etc.complete using ERW 1979 or induction butt welded tubes conforming to I.S. 1161-1179 grate St-240 , complete all as specified and as directed.

M&L PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement complete all as specified and as directed.

S & F 32 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink complete all as specified and directed.

S&F powder coated aluminium sliding glazed windows/ ventilater with three track , three shutter sliding with following specification and making good the adjacent side etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick shall be fixed in all around by CP screws with @ 300 mm c/c for fixing of windows frame.screws. (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick. with self lock arrengements. (iii)Sliding shutter frame of cross section 40 x 18 x 1mm thick. (iv) 4 mm thick tinted glass superior quality with rubber gasket for fixing of glass pane. (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter at end -01 Nos. (vii) Sliding rollers per shutter - 02 Nos. (viii)Stainless steel wire mesh of 0.36 mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos. (Ix) Cromium plated screw 300 mm C/C for fixing of frame with wall. (x) Aluminium grill DG 104, DG 02

S&F PVC Mirror cabinet of size 0.45x 0.30m with door shutter complete all as specified and directed.

S & F CP Brass Fancy type shower rose 125mm dia with shower arm 30mm long of approved quality complete all as specified and directed.

S&F 3mm thick sheet glass,ordinary qauality and glazing with oil putty in square n exc 05 sqm in each pane complete all as specified and directed.

S&F brass chromium plated corner glass shelf with bracket complete all as specified and directed.

S&F soap dish (ovel) type mild steel chromium plated of size as sample kept in sample room complete all as specified and directed.

S & F Reinforced concrete pipes 300 mm bore, class NP3 , laid and jointed complete with collars, complete all as specified and directed.

M & L cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate for the 200 /300mm internal dia of pipe complete all as specified and directed.

Point wiring with 1.5 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete , including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly including including modular metal flush box , cover plate and cover frame of suitable size incl taking down carefully copper/alluminium point wiring light, fan, sockets , all fittings and accessories & making good surface of walls and floors etc including cementing plastering finish with oil putty & distempering with two coats to match with existing wall, complete all as specified and directed for One light / fan /bell controlled by one, one way switch 5/6 Amps.

Description same as per Item No. 133 but One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 amps switch.

Description same as per Item No. 133 but One 3 pin, 5/6 amps socket outlet point on same board controlled by one, one way 5/6 amps switch.

Point wiring with 4.0 Sqmm (nominal cross sectional area ), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 4.0 Sqmm (nominal cross sectional area ) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 amps socket out-let point on an independent board including modular metal flush box , cover plate and cover frame of suitable size incl taking down carefully copper/alluminium power point wiring switches , sockets, & making good surface of walls and floors etc including cementing plastering finish with oil putty & distempering with two coats to match with existing wall, complete all as specified and directed

S&F in replacement of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V

S&F modular switch 1 way 6 A , 1 module complete all as specified and directed.

S&F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed.

S&F switch modular type 16 A, 1 module complete all as specified and directed.

S&F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed.

Supply and fixing surface /wall mounted LED batten poly carbonate housing for retrofit LED tube T-8 type upto 1x20 watt, 4 feet long pre wired incl integrated electronic driver complete with all connected accessories all as specified and directed.

Supply and fixing retrofit LED tube T-8 type 1x20 watt, 5700 to 6500 K and THD less than 15% , polycarbonate body ,glass tube 4 feet long complete with 02 years warrenty all as specified and directed.

S&F MCB DB SPN 4 way double door with 200 Amps rated bus bar ,230 volts, 50 Hz complete all as specifed and directed.

Supply & Fix MCB SPN 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed.

Supply & Fix MCB SP 6 to 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed.

Sub main wiring with 2 single core,4 Sqmm, PVC insulated PVC unsheathed stranded FR LSH copper conductor cable in and including PVC concealed/ surface conduit wherever necessary incl one run of earth wire with 1 x 4.0 Sq mm copper cable fixed along the sub main in PVC conduit and connecting to earth dolly complete including taking down old sub main wiring including cementing plastering finish with oil putty & distempering with two coats to match with existing wall, all as specified and directed. Note:- Two runs of main copper conductor, one run of earth wire and onr run of PVC conduit shall be measured as one unit length.

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amps concealed in wall, making good distempered surface including cementing plastering finish with oil putty & distempering with two coats to match with existing wall, all as specified and directed.

S&F Exhaust fan PVC body , non metalic single phase 230 volt of size 250 mm sweep with louver incl making hole on brick wall in suitable size, plastering and finishing all as specified and as directed.

Taking down carefully copper/alluminium point wiring (light, fan, sockets or power ) complete including all fitings and fixtures such as switches,sockets, ceiling roses, pendens, egulators, light fittings etc, removing matrials to store for taking credit and making good disturbed surfaces complete all as specified and directed.

Taking down carefully old/unsv submain wiring of any size complete including PVC conduits and fixtures complete all as specified and directed.

Taking down carefully old/unsv DBs of any capacity complete incl MCBS all as specified and directed.

Supply and fixing of LED down lighter fitting 18 watts having efficiency >110 Lumen/watts system output of minimum 1980 lumens, THD<10% PF>0.95 CRI> 70 CCT 5700-6400 k with IP20 protection single piece die cast aluminium housing having pc. LED driver should be electronic , surge protection should be 4kv. LM 79 and LM 80 report submitted at the time of product approval. Make Bajaj Cat Ref BPSLR 18W LED WH RD SD complete incl cutting of POP ceiling into required dia all as specified and as directed.

Supply and fixing of LED down lighter fitting 12 watts having efficiency >110 Lumen/watts system output of minimum 1980 lumens, THD<10% PF>0.95 CRI> 70 CCT 5700-6400 k with IP20 protection single piece die cast aluminium housing having pc. LED driver should be electronic , surge protection should be 4kv. LM 79 and LM 80 report submitted at the time of product approval. Make Bajaj Cat Ref BPSLR 12W LED WH RD SD complete incl cutting of POP ceiling into required dia all as specified and as directed.

Supply and fixing strip light of 25 watts for COB lighting with IP 20 protection LED strip should be included LED driver for every 5 meter role and warrenty should be 2 years from the date of purchase and color temparature should be warm white incl fixing along along POP/wall pannel edges in prestigeous building all as specified and directed. Make Bajaj Cat ref nxt 25W proffessional LED strip IP20NW

M&L for recessed spot light round Astral Round environmental friendly aesthetically designed , decorative recess mounted 2W LED spot light for low ceiling height applications incl fixing in POP /grid ceiling complete all as specified and directed.

M&L for Chandeliers decorative model incl fixing in RCC ceiling with proper anchor fastening of hanging height as desided at site incl its power connection from ceiling rose to Chandelier with 3 core copper cable ( height of RCC ceiling is more than 25 feet) and Provision of GI /MS pipe of suitable size and length for hanging Chandlelier in required height complete al as specified and directed. Model no 581885 of Philips ,Choisest cystals with Chrome finishing, a grand heritage design with woven laser cut anodised silver aluminium rod diffuser with clear crystal of wattage 9x60 watts max complete all as specified and directed. Note: Design and colour shall be made approved before making order.

M&L for spot light 7 watts surface mounted in matt finish aesthetic look complete incl connection from ceiling rose to connector complete all as specified and as directed. Model No. :- LHEEGBPBPHIW007 OF Havells or equvalent make of Philips / Bajaj.

S&F MCB DB, SPN 8 way, IP-43, IK 09, double door type with metal door, 230 V,50 Hz suitable for fixing MCB SPN as incomer and SP MCB/Isolator as outgoing, including taking down old DB with MCBs, fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed.

S&F MCB SPN 16 to 32 Amps,10 KA breaking capacity, 'C' curve complete all as specified and directed.

Sub main wiring with 2 single core,1.5 Sqmm, PVC insulated PVC unsheathed stranded copper conductor cable (FRLSH) in and including PVC concealed/ surface conduit (FRLS)incl one run of of earth wire with 1 x 1.5 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete including cementing plastering finish with oil putty & distempering with two coats to match with existing wall, all as specified and directed. Note: Two run of 1.5 sqmm PVC wire along with earth wire and one run of conduit shall be taken as one RM

Sub main wiring with 2 single core,2.5 Sqmm, PVC insulated PVC unsheathed stranded copper conductor cable (FRLSH) in and including PVC concealed/ surface conduit (FRLS)incl one run of of earth wire with 1 x 2.5 Sq mm copper cable fixed along with the sub main in PVC conduit and connecting to earth dolly complete including cementing plastering finish with oil putty & distempering with two coats to match with existing wall, all as specified and directed. Note: Two run of 2.5 sqmm PVC wire along with earth wire and one run of conduit shall be taken as one RM

M & L sub main wiring with 2 runs of 6 sqmm main wire along with 1 run of 6 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed / surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same including cementing plastering finish with oil putty & distempering with two coats to match with existing wall, & taking down complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.

Supply and fixing water heater storage type of 5 Star rating, capacity 25 liters with glass coated heating element to protect the heating element from oxidation and carbonization including PTMT connections 15 mm size with nuts and length of 450 mm with all fixing arrangements such as anchor fastner,bolts and nuts of suitable size as directed at site . The geyser should be tough enough to withstand pressure upto 8 bars. The inner tank should have a minimum 7 years warranty submitted by the tenderer from manufacturer . Additional warranty on Model having less than 07 years will not be accepted complete all as specified and directed. Make:- Havells / Jaguars / Racold

S&F MCB DB, SPN 12 way, IP-43, IK 09, double door type with metal door, 230 V,50 Hz suitable for fixing MCB SPN as incomer and SP MCB/Isolator as outgoing, including taking down old DBs, fixing flush to wall & making good the disturbed surfaces complete all as specified and as directed.

S&F MCB SPN 40 to 63 Amps,10 KA breaking capacity, 'C' curve complete all as specified and directed.

Replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 3, connected to earthing test point complete including testing on completion all as specified.

M/S Pawan Babulal

Auto Traders

NIDHI CONSTRUCTION

S.S. Engineers

BHATIA ASSOCIATES